Search

Continental shale in China is a key exploration target with regard to unconventional hydrocarbons. Systematic research on the mineral composition, organic geochemistry, and hydrocarbon mobility has been performed in the Da'anzhai (J1dn) lacustrine shale oil reservoirs, clarifying the factors controlling shale oil accumulation. The results suggest that J1dn consists of three sub-members, with an organic-rich interval developed within the second sub-member. Three types of lithological associations have developed within the organic-rich interval: Type 1 represents the interbedding relationship between shale and shell limestone and Type 2 represents shale with intercalated limestone, followed by Type 3. The brittleness index of the J1dn continental organic-rich shale is relatively low. The porosity of the Da'anzhai lacustrine shale ranges between 0.5% and 10.5% (average value of 5.89%). The porosity is predominantly due to inorganic pores, with a small amount being attributable to nanoscale microfractures and organic pores. The average porosity of the shell limestone is only 1.2%, but fractures at the micron and centimeter scales are well developed. The organic matter in the J1dn continental shale is mainly II1–II2, with maturity in the oil generation stage. The average oil saturation of the J1dn continental shale is 3.15%, with most samples having oil saturation of less than 4%. The J1dn continental shale has great exploration potential with regard to shale oil. Type 1 shale oil is affected by multiscale fractures, including bedding fractures, and has the best mobility. The high hydrocarbon generation capacity of lacustrine shale, coupled with the multiscale fractures within shell limestone and shale, is the principal controlling factor for hydrocarbon enrichment. Based on exploration practices, the Type 1 shale association may represent the optimal interval for future shale oil exploration in the Da'anzhai Member. [ABSTRACT FROM AUTHOR]

The Ediacaran Dengying Formation fourth member in Central Sichuan Basin is the deep dolomite gas reservoir with the largest natural gas reserves in China, providing an excellent example for understanding the effect of hydrothermal silicification on deep dolomite reservoir quality. By integrating petrology, geochemistry and physical property measurement, this study aims to reveal the genesis of different quartz phase and their corresponding diagenetic events, and to discuss the temporal relationship of diagenetic events and their effects on the quality of deep dolomite reservoir in Dengying fourth member. Three phases of quartz cement are identified in Ediacaran Dengying Formation deep dolomite reservoirs of Central Sichuan Basin as follows: (1) first‐stage quartz filled in primary reservoir spaces, (2) second‐stage quartz mainly filled in secondary reservoir spaces, and (3) third‐stage quartz filled in secondary reservoir spaces with Mississippi Valley‐Type minerals. By analysing petrographic and temporal relationships between these fabrics, it is suggested that the first‐stage quartz precipitated during the syndiagenetic stage, the second‐stage quartz precipitated during middle diagenetic stage, and the third‐stage quartz precipitated during middle diagenetic stage as well. Silicification during syndiagenetic stage is characterized by replacement of cryptocrystalline quartz and cementation of first‐stage quartz within matrix dolomite (MD). After syndiagenetic silicification, the mineral composition of the MD changed from magnesium calcium carbonate to silica, and the later constructive diagenetic alterations were almost ineffective. The distribution of syndiagenetic silicification during syndiagenetic stage gradually decreases from the platform‐interior to the platform‐margin. The second‐stage and third‐stage quartz cements, derived from two‐stage hydrothermal silicification in the middle stage, are both destructive for reservoir preservation. This study, combined with coeval vapour–liquid inclusions Th data and thermal‐burial models, constrains the time of the second‐stage quartz to ca. 403–408 Ma, suggesting an hydrothermal silicification related to the Caledonian movement. The time of the third‐stage quartz cement is constrained to ca. 259.4 Ma, associated with Late Permian eruption of Emeishan flood basalts. [ABSTRACT FROM AUTHOR]

The Xixiangchi Formation is a significant replacement stratum for natural gas production of deep marine carbonate in the Sichuan basin, which is mainly composed of grain shoal. Basic characteristics and corresponding major controlling factors of the Xixiangchi reservoir are of great importance for hydrocarbon exploration, but the diagenesis sequence and evolution of the reservoir are poorly understood because of their complexity. Based on core and thin-section observations, cathodoluminescence (CL), scanning electron microscopy (SEM), and microbiologically induced calcium carbonate precipitation (MICP) data, it is suggested that the Xixiangchi reservoir is comprised of medium crystalline dolostone and grain dolostone in the Central Sichuan basin, with an average porosity of 3.6% and 2.2%, respectively. The corresponding pore-throat type is an intercrystalline pore with a flaky throat and a dissolved intergranular pore with a necking throat. The majority porosity ranges from 2% to 4% (with a distribution frequency of 64.9%), but the permeability distribution is relatively scattered (with a distribution frequency between 10% and 30%). The capillary pressure curve of medium crystalline dolostone is characterized by coarse skewness, relatively flat plateaus, low displacement pressures, and high mercury saturation at relatively low injection pressures. The capillary pressure curve of grain dolostone is characterized by fine skewness, which exhibits relatively poor connectivity and a small value of median pore radius. The deposition of intraplatform grain shoals determines the original property of the Xixiangchi Formation reservoirs. Destructive diagenesis, including compaction and multistage cementation, decreases the physical properties of the Xixiangchi reservoir. Constructive diagenesis, including Caledonian supergene karstification and late-stage burial dissolution, tremendously improves the reservoir quality. [ABSTRACT FROM AUTHOR]

Based on comprehensive analyses of occurrence, petrological observation, pore structure and geochemistry, the different reservoir characteristics and reservoir evolutionary pathways between different oolitic shoal reservoir types of the Feixianguan Formation on the west side of the Kaijiang‐Liangping Trough have been studied. There exist three stages of high‐energy slope break belts in the Feixianguan period, the corresponding three stages of oolitic shoals gradually migrating in the direction of the trough. Three types of oolitic shoal reservoirs, namely, residual‐oolitic dolomite, mold‐oolitic dolomite and sparry oolitic limestone, were formed during sedimentary‐diagenetic evolution, the pore types being intergranular dissolved pore, mold pore (or intragranular dissolved pore) and residual intergranular pore, respectively. The petrology, physical properties and pore structure of the different types of oolitic shoal reservoirs are quite different. Residual‐oolitic dolomite reservoirs have the best quality, while sparry oolitic limestone reservoirs have the poorest. Combined with analyses of trace elements, rare earth elements and carbon‐oxygen isotopes, it is suggested that the formation of residual‐oolitic dolomite reservoirs is jointly controlled by penesaline seawater seepage‐reflux dolomitization and hydrothermal dolomitization. Mold‐pore oolitic dolomite reservoirs are controlled by penesaline seawater seepage‐reflux dolomitization and meteoric water solution. The burial dissolution of organic acid not only further improves the reservoir qualities of previously formed oolitic dolomite reservoirs, but also preserves residual intergranular pores in the sparry oolitic limestone reservoirs. [ABSTRACT FROM AUTHOR]

The characteristics of non-connected pores of four Longmaxi shale samples from the southern Sichuan Basin of China were investigated from the studies of pore size distribution (PSD), pore volumes, pore types using helium pycnometry [gas injection porosimetry (GIP) and GRI (Gas Research Institute) method], nuclear magnetic resonance (NMR), nuclear magnetic resonance cryoporometry (NMRc), and spontaneous water and oil imbibition experiments. GRI porosity on particle sizes less than 5 mm sample and a 2 MPa helium injection pressure provides information on the total porosity, including both non-connected and connected pores. GIP porosity using core plugs only measures connected pores which extend to the surface of the sample accessible by helium. So the difference between GRI and GIP porosities is used to estimate the volumes of non-connected pores. And the volumes of non-connected pores accounts for 17.5%–40.3% of the total pore volume. For NMRc test results, total pore volume increases with sample size decrease, and the great difference of pore volume with a pore diameter range from 5 nm to 31 nm between small cylinder sample and 0.15–0.075 mm crushed sample is caused by non-connected pores opened. With a decrease of length for cubic samples, the increase in volume and rate of oil imbibition is greater than that of water imbibition, indicating that the non-connected pores are considered to be mainly oil-wet. In addition, the percentage of non-connected pores has a good correlation with TOC (total organic carbon) content. Therefore, this evidence implies that non-connected pores are mainly within the organic matter. NMR tests at different drying temperatures and a NMRc experiment provide a quantitative classification of the shale pore system which indicates that the exploitable pore diameters are larger than 4.25 nm. So non-connected pores with a diameter of 5–31 nm could be effectively exploited if connected by fracturing. The more the non-connected pores are opened, the better the pore connectivity of shale reservoir will be, with a less possibility of water blocking. In the process of shale gas development, attention should be paid to the interaction between fracturing fluid and rock components in order to release more non-connected pores. Therefore, to increase shale gas extraction efficiency, more effort should be directed towards identifying natural, and creating induced, porosity. • Non-connected pore fractions of the studied shale are obtained from complementary approaches. • The shale pore system was quantified using NMR and NMRc methods, with measurable pore diameters down to 4.25 nm. • Non-connected pores, which are mainly in organic matter, constitute 17–40% of total pore volume and have diameters of 5~31 nm. [ABSTRACT FROM AUTHOR]

Organic-rich continental shale, widespread in the Sichuan Basin during the deposition of the Jurassic Dongyuemiao Member (J1d), is considered the next shale hydrocarbon exploration target in southern China. To identify a shale gas sweetspot and reduce exploration risk, it is of great significance to determine the organic matter (OM) enrichment mechanism of J1d shale. In this study, based on sedimentological characteristics and organic matter content, high-resolution major and trace elements were systematically analyzed to demonstrate terrigenous influx, paleoredox, paleosalinity, paleoproductivity, and paleoclimate. The 1st section interval of the J1d 1st submember is dominated by shallow lake subfacies, while the other intervals have the characteristic of semideep to deep lake subfacies. The 1st submember interval of J1d lacustrine shale is characterized by the warmest-humid paleoclimate, strongest weathering degree, highest terrigenous input, moderate paleoproductivity, and paleoredox condition. Within the Dongyuemiao 1st submember, the 4th section interval has the highest paleoproductivity and the most oxygen-deficient condition in bottom water. During the deposition period of the 2nd submember, the sedimentary environment turned to a cold-dry paleoclimate, weak weathering degree, low terrigenous input, low paleosalinity, and high paleoproductivity. Under the background of semideep and deep lake, the terrigenous OM input plays the most critical role in controlling OM enrichment. Moreover, the high primary productivity of lake surface water and the suboxic condition of lake bottom water contribute to the formation of relatively higher TOC lacustrine shale interval in the 4th section of 1st submember. [ABSTRACT FROM AUTHOR]