Search

The lowermost Late Permian coal seam (C4 Coal) in the Tongzi Coalfield offers an opportunity to investigate the influence of terrigenous detrital materials from the Qianbei Upland on the mineralogical and geochemical patterns of the C4 Coal. The minerals are mainly dominated by pyrite and, to a lesser extent, tobelite, kaolinite, and calcite, along with traces of Al-oxyhydroxide minerals. The various degrees of marine influence may have resulted in the variation in the amount of Fe-sulfides (e.g., pyrite) and elements having Fe-sulfides affinity. Furthermore, the abundant Fe ions involved in the formation of Fe-sulfides were most likely derived from the claystone on the Qianbei Upland. The tobelite identified in the C4 Coal probably originated from the interaction between pre-existing kaolinite and NH4+ from NH3 released from the thermally affected organic matter at least shortly after the highly volatile bituminous stage under NH4+-rich and K+-poor conditions. The terrigenous detrital materials were derived from two possible sediment-region sources-the Qianbei Upland and Kangdian Upland-which is different from Late Permian coals in Western Guizhou Province. The claystone on the Qianbei Upland may have served as parent rock, as indicated by the presence of the Al-oxyhydroxide minerals as well as low SiO2/Al2O3 ratio (0.66 on average) and low quartz content. Meanwhile, the detrital materials from the Kangdian Upland most likely originated from the erosion of the felsic rocks at the uppermost part of the Kangdian Upland, as evidenced by the high Al2O3/TiO2 ratio (36.0 on average) and the strongly negative Eu anomaly (0.61 on average). [ABSTRACT FROM AUTHOR]

The mode of occurrence and origin of highly-enriched trace elements, especially Ge, in Wulantuga high-Ge coal deposit have been widely reported. In this study, coal samples and several coalified trunks embedded within the roof strata are collected, which provides a good opportunity to further confirm if Ge is mainly associated with organic matter. Minerals in coal samples are mainly quartz, kaolinite, montmorillonite, pyrite, and gypsum, along with trace albite, barite, chlorite, and Fe-oxide, while those in coalified trunk samples include melanterite, pyrite, and gypsum, with traces of chlorite and magnesiocopiapite. Germanium, As, W, Sb, Hg, Be, and Cs are enriched in coal samples, and these elements are also enriched in the coalified trunks and roof glutenite. The elevated contents of Ge, As, W, Sb, and Hg were almost exclusively derived from the influx of hydrothermal fluids as evidenced by the presence of pyrite veins and chamosite as well as enhanced elemental associations of Ge-W and As-Sb-Hg in the studied lignite samples. The coalified trunks in the study area should be taken into consideration due to the high contents of hazardous elements that cause potential environmental impacts during mining waste disposal and land reclamation. [ABSTRACT FROM AUTHOR]

Abstract This paper investigates the mineralogy of coal and non-coal samples from the Haerjiao exploration area in the Jimunai depression, Xinjiang Uygur Autonomous Region, northwestern China, using X-ray diffraction (XRD), optical microscopy and scanning electron microscopy with an energy dispersive X-ray spectrometer (SEM-EDX). The minerals in the anthracite proximal to the igneous intrusions are represented by the occurrence of chlorite, muscovite, and illite, which are absent in the semianthracite distal to the igneous intrusions. Kaolinite, the dominant mineral in the semianthracite, decreases in abundance or even disappears in the anthracite. Muscovite and illite in the anthracite are interpreted to result from the alteration of the kaolinite precursor and possibly formed by the interaction of kaolinite and elements (e.g., K, Fe, and Mg) from igneous hydrothermal solutions. The formation of chlorite is the result of the transformation of kaolinite due to the interaction of kaolinite with Fe-Mg-rich solutions during the diagenetic stage and the direct epigenetic precipitation from Fe-Mg-rich igneous siliceous hydrothermal fluids. Calcite, ankerite, and sulfide minerals resulted from epigenetic precipitation from hydrothermal fluids. Cleat/fracture mineralization indicates that the Fe-Mg-rich hydrothermal fluid from which chlorite precipitated was introduced earlier than the Ca-rich fluid from which calcite precipitated. The injection of hydrothermal solutions that formed sulfide minerals occurred at the latest stage. Highlights • Igneous intrusions cause variations of coal rank and minerals. • Chlorite was formed by the transformation of kaolinite and direct precipitation from hydrothermal fluids. • Calcite and sulfides are mainly formed by the epigenetic solution precipitation. • Fe-Mg-rich hydrothermal fluid was earlier introduced than Ca-rich fluid. [ABSTRACT FROM AUTHOR]

Owing to the continuous high demand for energy, huge amounts of coals are consumed every year in China, giving rise to large volumes of coal combustion products (CCPs) from coal-fired power plants. Fly ash (FA), bottom ash (BA), boiler slag (BS), and flue gas desulphurization (FGD) gypsum are the primary CCPs generated. The disposal of these CCPs may occupy large areas of useful cultivated land, and cause serious environmental problems. However, these products might be also utilized as recoverable resources. Therefore, it is of economic and environmental significance to carry out research on the utilization of these CCPs. The present review first describes the physicochemical, mineralogical, and environmental geochemical properties of FA, slag, and FGD gypsum. Then the authors focus on the current and potential high value-added applications for these products in China. The utilization of FA for concrete and cement, soil amendment and fertilizer, in the ceramic industry, for catalysis, as adsorbents for the removal of flue gas, heavy metals, dyes and organic compounds, for zeolite and geopolymer synthesis, for recovery of valuable metals, and for recovery of unburned carbon and cenospheres, is discussed. The utilization of slag, such as reclamation of the burnable carbon, use in concrete, cement, and building materials, for roadway pavement and waste-water treatment, and for the production of acoustic barriers is reviewed as well. The current utilization of FGD gypsum includes use as a cement retarder, for the production of building plaster (β-hemihydrated gypsum) and calcium sulphate whiskers (α-hemihydrated gypsum), the production of fire-resistant panels, and use as a fertilizer and soil amendment agent. Furthermore, the possible influence of CCP properties on their utilization, and the advantages and disadvantages of various applications are discussed in this review. Finally, new directions for the future utilization prospects of CCPs in China are proposed. [ABSTRACT FROM AUTHOR]

Oxidative potential (OP) is considered to be an efficient indicator of particulate matter (PM) to induce oxidative stress in the lungs and is increasingly considered to be a relevant health metric. In this study, two complementary OP assays were deployed, including dithiothreitol (DTT) and ascorbic acid (AA) assays, to investigate the potential toxicity (as generators of oxidative stress) of respirable fractions (DD4, < 4 μm) of deposited dust (DD500, < 500 μm) in underground low-S and low-pyrite coal mines in Henan Province, Central China. The OPDTT of DD4 is higher than that reported for other types of atmospheric PM, whereas the OPAA of DD4 is similar and/or slightly higher. Cross-correlation and multilinear regression analyses are applied using datasets of major mineral and geochemical patterns in the DD4 samples and the respective OP values to identify the major drivers for OP in respirable coal dust. Thereafter, the patterns of DD4 are compared with those of DD500 and the parent coals to determine the sources of OP-relevant substances. OPDTT is mainly governed by some trace elements (Sb, As, Li, B, Sr, and Pb) and minor minerals (anatase, quartz, siderite), and their synergistic effect may be one of the reasons for the high DTT consumption. For OPAA, quartz, total clay (sum of illite, kaolinite, tobelite, and clinochlore) and Ni, Cr, Co, Si, and S, play an important role in regulating the OPAA of pyrite-free DD4 samples. These OP-relevant substances have three sources: coal dust, which has a similar composition in DD4, DD500, and the parent coal (such as siderite and its associated elements); gangue dust, which does not occur in the parent coal but is widely detected in DD4 and DD500 (such as quartz, kaolinite, and relevant elements); and cement dust (from gunite galleries), which is mainly calcite- and calcite-associated elements. • A study of the mineralogy, geochemistry and OP of deposited dust, respirable dust and coal in underground coal mines. • OPDTT of size-segregated respirable dust (DD4) is mainly governed by anatase, siderite, quartz, and Sb, As, Li, B, Sr, Pb. • OPAA of DD4 is regulated by anatase, tobelite, kaolinite, and total clay, as well as Ni, Cr, Co, Si, and S. • The parent coal dust, gangue dust, and cement dust are the primarily source of these hazardous materials. [ABSTRACT FROM AUTHOR]

Abstract: The Yimin Ge-coal deposit, located in the Yimin coalfield, Inner Mongolia, is the third largest Ge-rich coal deposit in China just after the Lincang and Wulantuga Ge-coal deposits. Based on the coal and non-coal samples recently collected from the Wumuchang coal mining district in the Yimin Ge-coal deposit, this paper reports some new data on the mineralogical and geochemical characteristics of the Yimin high-Ge coals, and provides some new evidence for the possible mode of Ge enrichment in the Yimin coals. Mineralogical analyses were performed by means of Powder X-ray diffraction (XRD). Major and trace element concentrations were determined by inductively coupled plasma atomic-emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS), respectively. Element affinities were determined by Pearson's correlation analysis. The studied coals fall within the coal rank between sub-bituminous A and high volatile bituminous C, with relatively high moisture content, high volatile matter yield and low to medium ash yield. Quartz and kaolinite are the main mineral matters in the Yimin coals, with small amounts of pyrite and traces of microcline. Common pyrite and As-bearing pyrite occurring in the Yimin coals show an epigenetic origin. The epigenetic precipitation of kaolinite, quartz and As-rich pyrite (with Ge, and other trace elements) in the Yimin coal fractures may be caused by activities of both hydrothermal and low temperature fluids. Compared to common Chinese and worldwide coals, the Yimin coals are markedly enriched in Ge (43mg/kg), As (155mg/kg), and W (9.84mg/kg) and slightly enriched in Pb (22mg/kg) and Hg (0.24mg/kg). Most of the elements (e.g. Al, K, Sc, Ti, V, Cu, Ga, Sn, Th and REEs) in the studied coals present an aluminosilicate affinity as deduced from their obvious positive correlation with Al and ash yields. High correlation coefficients of As and Hg with Fe and S indicate a sulfide affinity of these elements in the Yimin coals. Germanium, B, Mo, and W in the studied coals show an organic affinity and a partial sulfur affinity as deduced from their negative correlation with Al and positive correlation with S, respectively. The preliminary and possible model for Ge enrichment in the Yimin Ge-coal deposit was that Ge was carried by hydrothermal fluids and then these fluids were incorporated in the water existing in the upper porous conglomerates and percolate in the top of the coal seam, where Ge was trapped by organic matter and finally enriched in an early diagenetic stage (humification–gelification). [Copyright &y& Elsevier]

This study systematically investigates the mineralogical and geochemical variations in parent coal, coal gangue (roof, parting, and floor), deposited coal mine dust (DD), and respirable fractions of DD (RD) in an underground coal mine using the blasting mining method in China to evaluate the major sources of DD. The emission of dust in this study is affected by coal gangue sources during the mining process, which causes different geochemical patterns in the DD samples. Moreover, weathering of the cement gunite walls plays an important role in the enrichment of specific elements in the DD from air uptake and air out galleries. Furthermore, the spatial variation in RD characteristics, including mineralogy, geochemistry, and oxidative potential (OP), is discussed, with emphasis on the major health-relevant species and elements. Organic species from coal dust seem to be the essential components contributing to OP rather than metals, although some metals (e.g., Cr, Co, Ge, Se, Zn, Ba, Rb, Cs, Sn, and Pb) influence OP to some degree. [Display omitted] • Deposited coal mine dust, parent coal, and gangue in an underground coal mine using blasting mining method were studied. • Gangue and cement dust mixed into coal dust result in the enrichment of abundant elements. • The primary species driving the oxidative potential are site-dependent. • Organic species, quartz, calcite, and Cr, Co, Ge, Zn, Ba, Rb are highly correlated with toxicity. [ABSTRACT FROM AUTHOR]

Abstract: The Lincang (Yunnan Province, Southwest China) and Wulantuga (Inner Mongolia, Northeast China) coal deposits are known because of the high-Ge content. These coals have also a high concentration of a number of other elements. To determine the mode of occurrence of the enriched elements in both coals, six density fractions from<1.43 to>2.8g/cm3 were obtained from two representative samples using heavy-liquids. A number of peculiar geochemical patterns characterize these high-Ge coals. Thus, the results of the chemical analysis of these density fractions showed that both coals (very distant and of a different geological age) are highly enriched (compared with the usual worldwide coal concentration ranges) in Ge, As, Sb, W, Be, and Tl. This may be due to similar geochemistry of hydrothermal fluids influencing the Earth Crust in these regions of China. Moreover, Wulantuga coal (Early Cretaceous subbituminous coal) is also enriched in Ca, Mg, and Na, and Lincang coal (Neogene subbituminous coal) in K, Rb, Nb, Mo, Sn, Cs, and U. A group of elements consisting of Ge, W, B, Nb, and Sb mostly occur with an organic affinity in both coals. Additionally, Be, U, and Mo (and partially Mn and Zn) in Lincang, and Na and Mg in Wulantuga occur also with a major organic affinity. Both coals have sulfide–arsenide mineral assemblages (Fe, S, As, Sn, and Pb, and in addition to Tl, Ta, and Cs in the Lincang coal). The occurrence of Al, P, Li, Sc, Ti, V, Cr, and Zr in both coals, and Ba in Lincang, are associated with the mineral assemblage of silico-aluminates and minor heavy minerals. Furthermore, P, Na, Li, Sc, Ti, Ga, Rb, Zr, Cr, Ba, Th, and LREE (La, Ce, Pr, Nd, and Gd) in Lincang are associated with mineral assemblages of phosphates and minor heavy minerals. The two later mineral assemblages are derived from the occurrence of detrital minerals. Finally, the two coal samples have also the sulfate mineral assemblage (Ca and Sr) that probably occur as a consequence of a diagenetic oxidation and alteration of the coal seams. The enrichment of Ge in coal occurred when the organic matter was still reactive to trap Ge, but several features indicate that the enrichment was diagenetic. [Copyright &y& Elsevier]

Abstract: The geological and geochemical controls of the Ge distribution in the Cretaceous Wulantuga high-Germanium coal deposit in the Shengli coal field, Inner Mongolia are investigated. This paper focuses mainly on the spatial distribution of the Ge contents in coal. The high-Ge coals mainly occur in three splits of the #6 coal in the southwestern part of the Shengli coal field. Mean germanium contents in the coal range from 32 to 820 μg/g, with a mean value of 137 μg/g, on a bulk coal basis (mean of 939 coal samples from 75 boreholes in the #6 coal seam) in an area of 2.2 km2. The highest Ge content occurs SW of #6 coal seam, close to the margins of the coal basin, decreasing with a fan-shaped trend towards NW, the direction of the coal basin. There is an negative correlation between the mean Ge content and the thickness of the coal seam. Different distribution patterns of Ge content were found in vertical profiles. High Ge concentrations may occur in the middle parts of coal seams, at the bottom and/or the top of thick coal seams and inconspicuous variation. A major organic affinity was determined for Ge, with a special enriched in the banded bright and semibright coal. The high-Ge coals and the coalified wood in the sandstone overlaying the #6-1 coal highly enriched in Ge, As, Sb, W, Cs, Tl, Be, and Hg. The Late Jurassic silicified volcanic rocks in the NW of the Ge coal deposit relatively high enriched in Ge, Ga, Sb, As, Cs, Be, Ge and Hg. The correlation coefficients among the elements enriched showed marked variations at close sites in this deposit, suggesting a possible diagenetic origin of the geochemical anomaly. The main Ge anomaly was attributed to early Cretaceous hydrothermal fluids circulating through the fault systems and porous volcanic rocs, probably from the subjacent granitoid rocks. The fault systems, the porous coarse clastic rocks overlying coal seam and the lithotype of coal played an important role in the transport and trapping of Ge. A main diagenetic origin (overlapping a slight synsedimentary accumulation) is deduced for the Ge anomaly. [Copyright &y& Elsevier]

During the Late Paleozoic, West Junggar (Xinjiang, NW China) experienced a shift in tectonic setting from compression to extension. Ha'erjiao is an important area for investigating collisional structures, post–collisional structures, and magmatic activities. Based on the petrological and geochemical characteristics of pyroclastic and other volcanic rocks in the Permian Kalagang Formation from the borehole ZKH1205 in the Jimunai Basin, the main types of source rock for the pyroclastic rocks deposited in the basin are identified and their implications for the Early Permian tectonic setting examined. The abundance of basalt and andesite lithic fragments in the pyroclastic rocks, together with the REE characteristics and the contents of transition and high field strength elements show that the source rocks were chiefly intermediate–basic volcanic rocks. High ICV values, low CIA values, low Rb/Sr ratios, low Th/U ratios and the mineralogical features suggest weak chemical weathering of the source rocks; the geochemical patterns of the pyroclastic rocks might not only have been impacted by crustal contamination but also might be related to the nature of the magma from the source area. The geochemical properties of the pyroclastic rocks distinguish them from arc‐related ones, and such samples plot in the within‐plate basalt (WPB) field in some diagrams. This is consistent with the formation background of the Early Permian volcanic rocks in this region. [ABSTRACT FROM AUTHOR]

The abnormal enrichment of the REY (rare earth elements and yttrium)-Zr (Hf)-Nb (Ta) assemblage in Late Permian coals occurring in some coalfields in SW China has been extensively investigated, but the geological controlling factors of this assemblage are still under debate. This study reports on the mineralogical and geochemical features of coals and noncoal rocks collected from the Yudai and Jinqi coal mines within the Qiandongbei Coalfield in Guizhou Province to elucidate the geological controls on the distribution of REY-Zr (Hf)-Nb (Ta) enrichment horizons. The studied coals show rather consistent clay mineral assemblage of kaolinite, together with varying amounts of quartz, gypsum, pyrite, and calcite. Notably, the coals are anomalously enriched in REY, Nb, Ta, Zr, and Hf and enriched in other incompatible elements (e.g., Ga, Th, and U). Phosphates (e.g., florencite) and, to a lesser extent, zircon are the primary carriers of REY. Zirconium and Hf are mainly incorporated into zircon and then anatase, the latter of which is a predominant carrier of Nb and Ta. The detrital materials originate from a mixture of the erupted felsic volcanic ash resembling a peralkaline rhyolite composition and the eroded materials of Emeishan Large Igneous Province (ELIP) basalts. The studied coals owe their highly enhanced concentrations of the REY-Zr (Hf)-Nb (Ta) assemblage to the input of felsic volcanic ash, wherein the highly acidic aqueous solutions allowed these elements to become mobile and be redistributed. Both geological processes governed the distribution of REY-Zr (Hf)-Nb (Ta) enrichment horizons. The highly acidic solutions were possibly derived from the oxidation of peat bogs and volcanism-related acidic rain. The concentrations of REY, Zr, and Nb in the coal ashes exceed their corresponding cut-off grades; thus, these coals can be considered highly promising raw material sources for the REY-Zr (Hf)-Nb (Ta) assemblage. • The studied coals are significantly enriched in REY-Zr (Hf)-Nb (Ta) assemblage. • Detrital materials are derived from a mixture of felsic volcanic ash and eroded mafic materials. • The joint influence of highly acidic solutions and volcanism governs the REY-Zr (Hf)-Nb (Ta) enrichment horizons. • The volcanic ash erupted into peat bogs is geochemically similar to the peralkaline rhyolite. [ABSTRACT FROM AUTHOR]

Mineralogical and geochemical characteristics of coals provide crucial information on their potential clean, efficient, and integrated utilization. In this paper, the mineralogical and geochemical behaviors of the No. 5 coals of the Taiyuan Formation in the Weibei Coalfield, North China, were investigated, and their geological controlling factors were subsequently discussed. The minerals in the Weibei coals mainly consist of kaolinite (8.3%), calcite (5.0%), and pyrite (3.1%), with minor proportions of tobelite (2.9%), dolomite (1.7%), quartz (1.8%), and traces of siderite (0.4%) and gypsum (0.6%). Several critical elements, including Nb (19.8 mg/kg), Ta (3.6 mg/kg), Zr (71.0 mg/kg) and Li (32.3 mg/kg), occur at concentrations higher than those averages for world hard coals, making the Weibei coals potential sources of these critical elements. Several factors, terrigenous material, seawater invasion, and hydrothermal fluids are responsible for these mineralogical and geochemical characteristics. The L-type rare earth elements and yttrium (REE-Y) enrichment in the roofs and partings, Al2O3-TiO2 and Zr/TiO2-Nb/Y plots, and negative Eu and weak negative Ce anomalies in the Weibei coals indicate a felsic-intermediate dominated sediment provenance primarily derived from the Qilian-Qinling Oldland on the South. Marine bioclastic limestone, negative Ce and positive Y anomalies in coals imply the influence of seawater on the Weibei coals. Last but not least, the cleat-infilling and/or fracture-infilling calcite, pyrite, barite, and tobelite as well as the positive Eu and Gd anomalies, H-type, and M-type REE-Y enrichment patterns suggest the influence of hydrothermal fluids, which lead to re-distribution of some critical elements from roof and parting to the underlying coal seam. [ABSTRACT FROM AUTHOR]

Previous investigations on major and trace elements within the Early Permian coals from Xinjiang Province are very scarce. This paper reports on the geochemistry of the Early Permian coals and associated non-coal rocks in the Jimunai depression, Xinjiang Province, northwestern China. Samples collected from coal exploration boreholes ZK2603, ZK3003, and ZKH1102 as well as the Haerjiao underground coal mine (Nos. HRJ-7 and HRJ-9 Coals) in the Jimunai Depression were analyzed using SEM-EDS, ICP-AES, and ICP-MS. These Early Permian coals reach the rank of semi-anthracite to anthracite and have low-sulfur contents (0.30% on average). In comparison with the average element concentrations of world coals, Zr, Hf, and rare earth elements and Y (REY) are slightly enriched (concentration coefficient (CC) = 2–5, as the ratio of element content in sample vs. that in world coals) and Mn is enriched (CC = 5–10) in the ZK2603, ZK3003, and ZKH1102 coals. Niobium and Ta are highly enriched in the ZK2603 and ZK3003 coals (CC = 10–100). The HRJ-7 and HRJ-9 coals are slightly enriched in Mn (CC = 2–5). The coals have a sediment source region mainly composed of intermediate-felsic compositions from the Saur Volcanic Arc to the south of the Jimunai Depression, which may have provided relatively high geochemical background concentrations of Zr, Hf, Nb, and Ta. Manganese is hosted mainly in ankerite that was derived from epigenetic precipitation from Mn-bearing hydrothermal fluids. Zirconium and Hf in the ZK2603, ZK3003, and ZKH1102 coals are controlled primarily by detrital matter or hydrothermal fluids, the latter of which results in the higher Zr/Hf ratio in the ZK2603 and ZK3003 coals due to the re-distribution of Zr and Hf. Niobium and Ta in the ZK2603 and ZK3003 coals are concentrated chiefly in zircon, and hydrothermal fluid activity caused the release of Nb and Ta from previously-existing inorganic constituents and subsequent incorporation into zircon, resulting in the lower Nb/Ta ratio due to Ta being more easily incorporated into zircon than Nb. REY are hosted primarily within multiple mineral phases (e.g., zircon, phosphates, anatase, clay minerals) and their enrichment results from a combination of detrital matter input and hydrothermal fluid influx, the former of which is evidenced by the occurrence of REY-bearing detrital zircon and anatase, and the latter of which is indicated by the existence of REY-bearing authigenic rhabdophane and anatase and corroded anatase particles, as well as by the positive Gd anomalies and MREY-type or HREY-type REY distribution patterns. • The elevated Zr, Hf, Nb, and Ta are hosted mainly in zircon. • Hydrothermal fluid causes redistribution of Zr, Hf, Nb, Ta, and REY. • The enhanced Mn concentration was derived from epigenetic hydrothermal solution. • Terrigenous material and hydrothermal activity contribute to geochemical anomaly. [ABSTRACT FROM AUTHOR]

This paper investigates the mineralogy and geochemistry of four coal beds (WJB-6, WJB-7, FHS-23 and FHS-27 Coals) of the Late Permian in the Zhina Coalfield, western Guizhou Province, China. The investigated coals reach the semianthracite -anthracite coal rank and have super-low to low ash yields. The sulfur contents vary considerably through coal sections and are mostly in the range of medium-high sulfur coal. The mineral assemblage present in the FHS-23 and FHS-27 Coals is mainly made up of pyrite and rectorite; the WJB-6 and WJB-7 Coals have different mineralogy, with kaolinite and rectorite dominant in the former as well as quartz and rectorite in the latter. These coals contain high concentrations of Nb and Ta, but Li is only enriched in the WJB-6 Coal. Rectorite and anatase in these coals are important hosting phases of Nb and Ta while kaolinite, and to a lesser extent chamosite in the WJB-6 Coal, are dominant carriers for the elevated Li concentration. The terrigenous material input, the marine influence and the effect of circulating hydrothermal solution are the pivotal geological factors causing geochemical anomalies in coals investigated. The high-sulfur coals were subjected to an enhanced marine influence in the depositional environment, as well as to a higher terrigenous influx, when compared with the medium-sulfur and low-sulfur coals, resulting in higher concentrations of S-Fe-As-Mo-U-Hg in the former coals than in the latter ones. The anomalous enrichment of Nb and Ta in these coals, as well as of Li in the WJB-6 Coal, is the result of the contributions from ascending hydrothermal solutions, although source rocks (e.g., high-Ti basalt) may provide relatively high background abundances of Nb, Ta and Li. [ABSTRACT FROM AUTHOR]

Abstract: The mineralogical and geochemical characteristics of the Late Permian Huayingshan coals, partings, roof and floor strata, as well as lutitic rocks from the Longtan Formation, in Sichuan Province, southwestern China, were investigated in this study. The Huayingshan low volatile bituminous coals are characterized by relatively high mineral contents (mainly kaolinite, quartz, pyrite, and calcite). The concentrations of most trace elements are relatively high compared with other Chinese and world coals. The coals and associated strata show similar element affinities: Al, Ti, Li, Ta, Th, Ga, U, Sn, Sc, Cr, Cu, Rb, Co, and Se probably have an aluminosilicate affinity; Zr, Nb, Hf, Y, REEs, and U probably result from the occurrence of heavy minerals such as zircon; S, Fe, W, and Rb mainly have a sulfide affinity; Ca, Sr, and Mn mainly have an carbonate affinity. The high enrichment in the Huayingshan coal of Zr, Nb, Hf, REEs, Ta, Ga, and Th is caused by a geochemical anomaly in the source of this coal''s detrital material (and probably also by input of volcanic ash), which is influenced by the alkaline volcanic magmas of the Emeishan basalt. The Zr/Hf, Zr/Nb, Zr/La and Zr/Th ratios support the volcanic origin of such a geochemical anomaly. [Copyright &y& Elsevier]

Abstract: The Zhundong coalfield is a very large coal deposit, currently under exploration, and promises to be an important coal mining resource in Western China. The coal reserves amount to 164Gt. At Xiheishan and Wucaiwan, the coal-bearing units are the Badaowan (Lower Jurassic) and, especially, the Xishanyao formations (Middle Jurassic). These contain from one to 31 coal seams (one to 10 workable coals reaching the rank of high volatile A bituminous) with an accumulated workable coal thickness of 20–87m. These recently explored coal reserves are of a high quality and are characterized by low ash, aluminum, iron, sulfur, and trace element contents. The minerals present in this coal are mainly quartz, kaolinite, siderite, and pyrite. The trace element contents in both Xiheishan and Wucaiwan coals are much lower when compared with the usual concentration ranges present in Chinese coals, with the exception of Ba and Sr. Thus, Ba contents in Xiheishan coal are higher than Swaine''s worldwide concentration range. A large number of elements have mainly aluminosilicate affinity, and occur in clay and other detrital coal minerals. Ca and Mn have mainly carbonate affinity; Fe and S have mainly sulphide affinity in Wuchaiwan coal. In Xiheishan, Fe, Mn and Mg have mainly carbonate affinity (siderite), and probably, B, Co, Ni and S have an organic affinity. Thus, the Zhundong coalfield contains coal with a very high quality and very low levels of impurities. The very low ash yields, S, Fe, and trace element contents may be attributed to the sedimentological setting, with intensive peat bog aggradation in a very shallow lake environment with a low detrital supply. The very low sulfur content, the relatively high Ba-sulfate (barite) content and the high siderite occurrence in Xiheishan coal (in contrast to the pyrite occurrence in Wucaiwan coal) may be attributed to the rapid aggradation of peat with the consequent oxidation and leaching of minerals, elements, and degradation of organic components. Under this scenario, sulfate is trapped by the continuous precipitation and accumulation of barium sulfate (very low soluble). [Copyright &y& Elsevier]

• Inorganic trace pollutants are studied in a coal-fired power station in China. • The aqueous (NH 4) 2 SO 4 slurry (pH 3.2) is enriched in inorganic trace pollutants. • NH 3 -FGD performance for the retention efficiency of trace pollutants is questioned. • Acidic conditions of the aqueous (NH 4) 2 SO 4 slurry could lead to low FGD efficiencies. • Operating conditions may affect Hg fate across the PCC-SCR-ESP-NH 3 -FGD. The behaviour and speciation of inorganic trace pollutants were studied in a 270 MWh coal-fired power station equipped with denitrification (DeNOx)-based selective catalytic reduction (SCR), electrostatic precipitators (ESP) and ammonia flue gas desulphurisation (NH 3 -FGD) controls. The aqueous (NH 4) 2 SO 4 slurry (pH 3.2) showed remarkably high concentrations of SO 4 2−, Cl−, Fe, NH 4 +, PO 4 3−, and F− and was substantially enriched in multiple trace pollutants, e.g. Mn, Ni, Zn, and As, which can be ascribed to the diffusion of gaseous pollutants released during combustion and to the partial dissolution of fly ash (FA) particles entrained in the flue gas FGD. These processes were favoured by the iteration of the FGD water re-circulation cycles within the scrubber. Three major unresolved performance issues remain for the NH 3 -FGD with respect to the retention efficiency of major and trace pollutants: (i) the high concentration of soluble salts and major and minor trace elements in the aqueous (NH 4) 2 SO 4 slurry could lead to entrainment of droplets and particles with the outgoing (OUT)-FGD gas; (ii) the ionic strength, as a result of the high concentration of the elements associated with soluble salts and major and minor elements, could lead to diminishing diffusivity of gaseous pollutants into the aqueous phase, where these are supposed to dissolve; and (iii) the acidic conditions of the aqueous (NH 4) 2 SO 4 slurry, caused by Fe-hydrolysis, could lead to low FGD efficiencies. Operating conditions at this power station affect Hg partitioning and fate across the PCC-SCR-ESP-NH 3- FGD. [ABSTRACT FROM AUTHOR]

Coal mining in China is continually increasing, and the associated emitted coal mine dust is of growing environmental and occupational concern. In this study, deposited coal mine dust (DD) was analysed in three different regions of an active, highly-volatile bituminous open-pit coal mine in the Xingjian Province, Northwest of China: coal working fronts, tailings handling sites, and road traffic sites. Samples were analysed for particle size, and geochemical and mineralogical patterns, and then compared with the respirable DD fractions (RDDs, <4 μm) separated from DD samples. Online measurements of ambient air concentrations of particulate matter (PM 10 and PM 2.5), black carbon (BC) and ultrafine particles (UFP) were performed in the same mine zones where DD was sampled. Furthermore, the RDD samples were subjected to analysis of specific biological response or toxicological indicators (oxidative potential, OP). The results demonstrated: i) large differences in particle size and composition among DD from tailings handling, road traffic and coal working front sites, ii) a strong influence of the DD moisture contents and ash yields on particle size, and, accordingly, on the potential dust emissions, iii) an enrichment of multiple elements (such as Nb, Th, Cr, Sr, Li, As, Pb, Cu, Zr and Ni) in the RDD from coal working fronts compared with their contents in the worked parent coal seams, mostly attributed to mining machinery, tyre and brake wear emissions and to deposition of dust emitted from gangue working zones, iv) low OP values of the RDD emitted from the studied mine, which works a high-quality coal, with OP being influenced by Mn, sulphate and anatase (TiO 2) contents, and v) the impact of specific mining operations and mine areas on the levels of air pollutants, such as high PM from tailings handling in the upper parts of the mine or the high UFP levels in the bottom of the mine (due to vehicle and machinery emissions and lower dispersive conditions). The data presented here demonstrate the necessity of extracting the more deeply respirable size fraction of coal mine dusts in future studies on the health effects of these materials because this finer fraction is mineralogically and geochemically different from the parent rocks. • High impact of specific mining operations in ambient air pollutants. • Particle size distribution of deposited dust (DD) was different over mine sites. • Moisture and ash have strong influence on respirable DD (RDD) emissions. • Enrichment of multiple elements in RDD attributed to mining activities. • Oxidative potential of RDD is influenced by Mn, sulphate and anatase contents. [ABSTRACT FROM AUTHOR]

Superhigh organic sulfur(SHOS) coals have currently attracted great attention due to their typical depositional environments and formation history as well as their great negative impact on the ecosystem. This study investigated the geochemistry of the No. 11coalof the Late Carboniferous Taiyuan Formation from the Sangshuping coalmine, Hancheng miningarea, Weibei coalfield, Shaanxi, North China. The No. 11 coal is a high-sulfur coal with a large proportion of organic sulfur content (3.7 to 5.5%, avg. 4.4%) and belongs to typical SHOS coal. The high sulfur content in the Sangshuping coal mine has been mainly caused by the combined influences of seawater and hydrothermal fluids. The SHOS in No. 11 coal was formed in the Fe-poor and S-rich high-marine influenced occlusive environment. During the late coalification stage, a high proportion of pyritic sulfur was formed due to sufficient Fe supply from the Fe–S-rich epigenetic hydrothermal fluids. The No. 11 SHOS coal is enriched in Li–Ga–Zr–Hf and Se–Mo–Cr–V–As–Pb element assemblages. The sediment provenance of the Sangshuping coal mine is predominantly felsic–intermediate rocks from both the Yinshan and Qinling Oldland. However, the elevated concentrations of critical elements (Li, Ga, Zr, and Hf) in the No. 11 coal are primarily inherited from the Yinshan Oldland. The enrichment of the Se–Mo–Cr–V–As–Pb assemblage in No. 11 coal can be ascribed to the influence of both seawater and epigenetic hydrothermal activity. [ABSTRACT FROM AUTHOR]

• Respirable fraction of dust deposited inside coal mines was extracted and analysed • Respirable coal dust is enriched in minerals related to parent coal geochemistry • Deposited coal mine dust can be used as a proxy for the geochemistry of PM10 • Fe, Si, Mn, Ba and particle size of coal dust are highly correlated with toxicity We focus on a comparison of the geochemistry and mineralogy patterns found in coal, deposited dust (DD), respirable deposited dust (RDD) and inhalable suspended dust (PM10) from a number of underground mines located in China, with an emphasis on potential occupational health relevance. After obtaining the RDD from DD, a toxicological analysis (oxidative potential, OP) was carried out and compared with their geochemical patterns. The results demonstrate: i) a dependence of RDD/DD on the moisture content for high rank coals that does not exist for low rank coals; ii) RDD enrichment in a number of minerals and/or elements related to the parent coal, the wear on mining machinery, lime gunited walls and acid mine drainage; and iii) the geochemical patterns of RDD obtained from DD can be compared with PM10 with relatively good agreement, demonstrating that the characterization of DD and RDD can be used as a proxy to help evaluate the geochemical patterns of suspended PM10. With regards to the toxicological properties of RDD, the Fe content and other by-products of pyrite oxidation, as well as that of anatase, along with Si, Mn and Ba, and particle size (among others), were highly correlated with Ascorbic Acid and/or Glutathione OP. [ABSTRACT FROM AUTHOR]

The potential utilization of boiler slag generated in large amounts from pulverized-coal-combustion (PCC) power plants has recently drawn much attention due to the serious problems caused to ecosystems. In order to make maximal use of the boiler slag and reduce the environmental risk it poses, this study focused on manufacturing acoustic materials using boiler slag from Chinese PCC power plants. Three promising acoustic materials were successfully manufactured from up to 80% boiler slag with different grain sizes, with the addition of 20% Portland cement. The density and compressive strength of the products were inversely proportional and the sound absorption coefficient was positively proportional to the grain size of the boiler slag. The best sound absorption coefficient was obtained in products made from the coarsest fraction of the boiler slag (MS-C). Nonetheless, all the boiler-slag-based acoustic products still demonstrated compressive strength and densities comparable to those of other acoustic materials made of Spanish bottom ash or other conventional/recycled materials. The acoustic products made from the coarsest fraction (MS-C) and medium fraction (MS-M) of the boiler slag presented good noise absorption characteristics, like those of the commercial coarse porous cement that is traditionally used as an acoustic product. Furthermore, the acoustic products were characterized by very low leach ability of potentially hazardous elements. Consequently, the manufacture of acoustic materials is a very promising application for boiler slag. On the one hand, it consumes huge amounts of boiler slag that is generated in large amounts in China. On the other hand, the acoustic products can be used extensively to produce road acoustic barriers with a high sound absorption efficiency, no significant physical or mechanical limitations and no environmental implication. [ABSTRACT FROM AUTHOR]