Search

Many oil and gas fields, especially non-conventional shale and compacted sand reservoirs, have formation anisotropy. The acoustic anisotropy measurement of cores in these reservoirs can guide drilling, well logging, and exploitation. However, almost all core holders are designed for cylinder cores, which are not suitable for all-directional measurements. A three-dimensional measurement device was designed on the basis of the cross-hole sonic logging method. This device mainly consisted of two pairs of transducers, a signal generator, an oscillograph, an omnidirectional positioning system, and a computer control system. By adjusting the measurement latitude and longitude circle automatically, this device scanned spherical sample rocks and obtained full-wave waveforms in all directions. Experiments were performed taking granite from the Jiaodong Peninsula, China, as an example, and the arrival times and velocities of the longitudinal and shear waves were calculated based on the full-wave waveforms. Thereafter, anisotropic physical characterizations were carried out on the basis of these velocities. These data play an important role in guiding formation fracturing and analyzing the stability of borehole walls. [ABSTRACT FROM AUTHOR]

This study examined the development of a digital pulse analyzer (DPA) used for obtaining the pulse height distribution (PHD), pulse width distribution (PWD), and interval time distribution (ITD) simultaneously by processing output signals from an optical particle counter (OPC). The characterization was performed by testing the response of the DPA as a function of its input frequency and pulse height using dummy signals from a signal generator (model DG1022, Rigol Technologies Inc., People's Republic of China) and actual OPC signals (Model KC-03, Rion Co. Ltd, Japan). Polystyrene latex particles of various sizes yielded by a scanning mobility particle sizer were used during the calibration of the DPA. It was found that the geometric mean of the PHDs was in accordance with Mie theory and could be used for converting pulse height into data which represents the size of particles. Furthermore, by using the PWD and ITD, we could estimate the viewing volume and dead time of the OPC. The DPA could successfully discriminate particles from baseline noise or voltage spikes by applying a novel algorithm to detect pulses based on the pulse area (integral of the voltage–time curve). The results showed that the ranges of particle diameter, viewing volume, and dead time measured by the OPC-DPA system were 0.2–1 µm, (0.78 ± 0.09) mm3, and (45.9 ± 12.6) µs, respectively. The new algorithm can be applied to pulse height analyzers in general, in the measurement of aerosol particles or scintillator-based particle detectors. [ABSTRACT FROM AUTHOR]

The purpose of the work is to design a novel impedance adapter to set up a mono‐cone standard field generation system with a large clear time and a large dynamic range. To transform the impedance from 50 Ω (the output impedance of the signal generator) to 75 Ω (the input impedance of the cone), the gradient structures with 11 sections are designed for the impedance adapter. The measured VSWR of the system is below 1.5 from 300 to 2.25 GHz. The insertion loss of the designed is about −35 dB. The system with the designed impedance adapter works well. This is validated by the results of the standard open‐air test site in National Institute of Metrology, China. [ABSTRACT FROM AUTHOR]

A pulsed high magnetic field laboratory has been funded to be established at the Huazhong University of Science and Technology (HUST), Wuhan, China by the National Development and Reform Committee. The facility is planned to be open for external users in 2011 with the implementation of various experimental techniques in pulsed magnetic fields up to 80 T. Pulse durations are in the range from 15 to 1000 ms with the magnet bore sizes from 12 to 34 mm. The pulsed power supplies are a 12 MJ, 25 kV capacitor bank and a 100 MVA/100 MJ flywheel pulse generator. The design and analysis of the power supplies and the magnets of short and long pulse durations and the multi-stage pulsed magnets with controllable waveforms are presented in this paper. [ABSTRACT FROM AUTHOR]