Search

In recent years, the PALM 6.0 modelling system has been rapidly developing its capability to simulate physical processes within urban environments. Some examples in this regard are energy-balance solvers for building and land surfaces, a radiative transfer model to account for multiple reflections and shading, a plant-canopy model to consider the effects of plants on flow (thermo)dynamics, and a chemistry transport model to enable simulation of air quality. This study provides a thorough evaluation of modelled meteorological, air chemistry, and ground and wall-surface quantities against dedicated in situ measurements taken in an urban environment in Dejvice, Prague, the Czech Republic. Measurements included monitoring of air quality and meteorology in street canyons, surface temperature scanning with infrared cameras, and monitoring of wall heat fluxes. Large-eddy simulations (LES) using the PALM model driven by boundary conditions obtained from a mesoscale model were performed for multiple days within two summer and three winter episodes characterized by different atmospheric conditions. For the simulated episodes, the resulting temperature, wind speed, and chemical compound concentrations within street canyons show a realistic representation of the observed state, except that the LES did not adequately capture night-time cooling near the surface for certain meteorological conditions. In some situations, insufficient turbulent mixing was modelled, resulting in higher near-surface concentrations. At most of the evaluation points, the simulated surface temperature reproduces the observed surface temperature reasonably well for both absolute and daily amplitude values. However, especially for the winter episodes and for modern buildings with multilayer walls, the heat transfer through walls is not well captured in some cases, leading to discrepancies between the modelled and observed wall-surface temperature. Furthermore, the study corroborates model dependency on the accuracy of the input data. In particular, the temperatures of surfaces affected by nearby trees strongly depend on the spatial distribution of the leaf area density, land surface temperatures at grass surfaces strongly depend on the initial soil moisture, wall-surface temperatures depend on the correct setting of wall material parameters, and concentrations depend on detailed information on spatial distribution of emissions, all of which are often unavailable at sufficient accuracy. The study also points out some current model limitations, particularly the implications of representing topography and complex heterogeneous facades on a discrete Cartesian grid, and glass facades that are not fully represented in terms of radiative processes. Our findings are able to validate the representation of physical processes in PALM while also pointing out specific shortcomings. This will help to build a baseline for future developments of the model and improvements of simulations of physical processes in an urban environment. [ABSTRACT FROM AUTHOR]

The PALM 6.0 model system has been rapidly developed in the recent years with respect to its capability to simulate physical processes within urban environments. In this regard, it includes e.g. energy-balance solvers for building and land surfaces, a radiative transfer model to account for multiple reflections and shading, as well as a plant-canopy model to consider the effects of plants on the (thermo)dynamics of the flow. This study provides a thorough evaluation of modelled meteorological, air chemistry and wall-surface quantities against dedicated in-situ measurements taken in an urban environment in Prague, Dejvice, Czech Republic. Measurements included e.g. monitoring of air quality and meteorology in street canyons, surface temperature scanning with infrared camera and monitoring of wall heat fluxes. Large-eddy simulations (LES) for multiple days within two summer and three winter episodes that are characterized by different atmospheric conditions were performed with the PALM model driven by boundary conditions obtained from a mesoscale model. For the simulated episodes, the resulting temperature, wind speed and concentrations of chemical compounds within street canyons agreed well with the observations, except the LES did not adequately capture nighttime cooling near the surface at certain meteorological conditions. In some situations, less turbulent mixing was modelled resulting in higher near-surface concentrations. At most of the surface evaluation points the simulated wall-surface temperature agreed fairly well with the observed one regarding its absolute value as well as daily amplitude. However, especially for the winter episodes and for modern buildings with multi-layer walls, the heat transfer through the wall is partly not well captured leading to discrepancies between the modelled and observed wall-surface temperature. Furthermore, we show that model results depend on the accuracy of the input data, particularly the temperatures of surfaces affected by nearby trees strongly depend on the spatial distribution of the leaf area density, land-surface temperatures at grass surfaces strongly depend on the initial soil moisture, or wall-surface temperatures depend on the correct prescription of wall material parameters, though these parameters are often not available with sufficient accuracy. Moreover, we also point out current model limitations, here we particularly focus on implications with respect to the discrete representation of topography on a Cartesian grid, complex heterogeneous facades, as well as glass facades that are not well represented in terms of radiative processes. With these findings presented, we aim to validate the representation of physical processes in PALM as well as to point out specific shortcomings. This will help to build a baseline for future developments of the model and for improvements of simulations of physical processes in an urban environment. [ABSTRACT FROM AUTHOR]

The overall impact of urban environments on the atmosphere is the result of many different nonlinear processes, and their reproduction requires complex modeling approaches. The parameterization of these processes in the models can have large impacts on the model outputs. In this study, the evaluation of a WRF/Comprehensive Air Quality Model with Extensions (CAMx) forecast modeling system set up for Prague, the Czech Republic, within the project URBI PRAGENSI is presented. To assess the impacts of urban parameterization in WRF, in this case with the BEP+BEM (Building Environment Parameterization linked to Building Energy Model) urban canopy scheme, on Particulate Matter (PM) simulations, a simulation was performed for a winter pollution episode and compared to a non-urbanized run with BULK treatment. The urbanized scheme led to an average increase in temperature at 2 m by 2 ∘ C, a decrease in wind speed by 0.5 m s − 1 , a decrease in relative humidity by 5%, and an increase in planetary boundary layer height by 100 m. Based on the evaluation against observations, the overall model error was reduced. These impacts were propagated to the modeled PM concentrations, reducing them on average by 15–30 μ g m − 3 and 10–15 μ g m − 3 for PM 10 and PM 2.5 , respectively. In general, the urban parameterization led to a larger underestimation of the PM values, but yielded a better representation of the diurnal variations. [ABSTRACT FROM AUTHOR]