Search

Ethiopia is well known for its use of an ard plough dating from antiquity – maresha – which fractures and disturbs the soil. However, hardly any notable progress of experimental research on this animal drawn tillage tool in the field has been made. The attendant problems in current practise are soil- maresha interaction, viz., uneven oxen strength along with different pace of walking, uncontrolled implement behaviour, and field conditions. Taking stock of the experimental research on animal drawn tillage tools in general, most of the documented works on the dynamics of the interaction between soil and animal drawn tillage tools tend to rely on trial-and-error based on factors mainly based on experience and cultural context. As such, no research tailored to systematically handle the link between maresha plough and soil bin experiments exists. To this aim, this study developed a mobile in-situ soil bin facility in which the system was calibrated, tested, and evaluated under outdoor experimental conditions, wherein online measurements of draught, speed, and depth of tillage were carried out. The insights and observations gained from the experimentation were discussed and reported in terms of smooth run, overload, cyclic forces, zero speed with minimal force, stoppage, speed measurement with no force, force measurement with no speed, and low speed with low force. [ABSTRACT FROM AUTHOR]

Ethiopian farmers have been using an ox-drawn breaking plough, known as ard plough – maresha, for thousands of years. Maresha is a pointed, steel-tipped tine attached to a draught pole at an adjustable shallow angle. It has narrow side-wings, attached to the left and right side of it, to push soil to either side without inverting. The aim of this paper is to explore the effect of side-wings on draught using a field soil bin test facility. To this end, a mobile and an in-situ soil bin test system, for online measurements of draught, was designed and developed. This research considered tool geometry ( maresha plough with and without side-wings) and rake angle (shallow – 8°, medium deep – 15°, and deep – 24°, representing primary, secondary and tertiary tillage processes in Ethiopia, respectively). Maresha plough with side-wings has greater contact area, between the moving soil and tool, than its wingless counterpart. When the ploughshare surface and soil slide relative to one another, the draught expected to increase with contact area, as adhesion and friction resistance increases with area. However, experimental analysis indicated that the maresha with side-wings required less draught compared to maresha without side-wings ( ρ < 0.001) . This might be attributed to the effect of side-wings on crack propagation by a wedging effect to enhance and facilitate subsequent ploughing. This paper also dealt with the effect of rake angle on draught. Though the depth setup was getting smaller d 1 < d 2 < d 3 for the successive tillage runs, analysis showed increment in draught force ( ρ < 0.001) with rake angle. This might be attributed to higher soil compaction that comes with depth and downward force resulting from repeated use of maresha every season to the same depth for thousand years. Although more and rigorous studies should be undertaken considering soil, tool, and operational parameters to arrive at conclusive results, this paper gave some insights regarding effect of side-wings on maresha plough and rake angle on draught. This shows that there is still room for improvement of maresha plough geometry for minimum draught requirement and optimum soil manipulation. [ABSTRACT FROM AUTHOR]