Search

Clays are extremely variable materials with different mineral compositions, and they are the main ingredients in ceramics applications. Their properties play specific roles in influencing the technological properties and performance of ceramics products. Evaluating the various properties can help to determine the best way to utilize clay materials, such as the locally available Bombawuha (BC) and Denkaka (DC) clays mined from Ethiopia's Bombawuha and Denkaka areas, respectively. The objective of this study was to examine these materials for the purpose of using them to produce quality electrical porcelain insulators. The clay samples were characterized for their chemical composition, mineralogy, thermal properties, plasticity, and particle-size distribution, using atomic absorption spectrometry (AAS), X-ray diffractometry (XRD), differential thermal analysis coupled with thermogravimetric analysis (DTA-TGA), the Atterberg plasticity test, and sieve hydrometer analysis. Based on the characteristics, suitable clay materials were selected and mixed with feldspar and quartz to formulate various porcelain body compositions which were fired at three different temperatures (1200, 1250, and 1300°C) and dwell times (1.5, 2.0, and 2.5 h). The mineralogy, water adsorption, apparent porosity, bulk density, dielectric strength, flexural strength, and microstructure of the fired bodies were measured. The results revealed that, compared to DC, BC contains kaolinite as the major mineral with appreciable amounts of silica (46.72 wt.%), alumina (35.32 wt.%), and fluxing oxides but smaller amounts of CaO. BC contains greater clay fractions (20.58 wt.%); and has a middle-range plasticity index (PI = 11.2 wt.%), thus making BC suitable for producing porcelain insulators. A test-body composition of 40 wt.% BC, 40 wt.% feldspar, and 20 wt.% quartz, fired at 1250°C for 2 h, exhibited water adsorption of 0.17 wt.%, apparent porosity of 0.42 wt.%, bulk density of 2.45 g/cm3, a dielectric strength of 8.22 kV/mm, and flexural strength of 43.63 MPa and, thus, satisfied the required properties for quality porcelain insulators. [ABSTRACT FROM AUTHOR]