Search

Nitrogen (N) is a macronutrient that, together with P and K, is vital for improving agricultural yields, but its excessive use in crop fertilisation and presence in treated wastewater and sludge are generating emissions both into the atmosphere and into natural water bodies, which leads to eutrophication events. The Haber-Bosch process is energy-intensive and it is the main chemical route to produce reactive nitrogen for the production of fertilisers. Furthermore, there is a strong dependence on imports of reactive nitrogen in Spain and Europe. For these reasons, it is necessary to propose sustainable alternatives that allow solving environmental and supply problems, in addition to proposing efficient management schemes that fit into the circular economy approach. In this context, a nitrogen flow analysis (NFA) was carried out for Spain with the year 2016 as reference. To assess some interactions and flows of N, specific sub-models were also considered for the agriculture and waste management systems. For the food and non-food flow systems, country-specific data were considered. The sectors covered were crop production (CP), animal production (AP), food processing (FP), non-food production (NF) and human consumption (HC). The results reveal a total annual import of 2142 kt N/y, of which 43 % accumulated in stocks of soils and water bodies (913 kt N/y). The largest proportion of losses was associated with emissions from agriculture (724 kt N/y to water bodies and 132 kt N/y accumulated in soils), followed by industry emissions to the atmosphere (122 kt N/y). Wastewater treatment plants (WWTPs) received around 67 kt N/y, of which 26 % was removed as biosolids and 20 % of these biosolids were recovered to be used for fertilising applications. The 49 kt N/y discharged in the final treated effluent represented 79 % of the total loss of reactive nitrogen to water bodies. In addition, an analysis of N-use efficiency and the actions required for its improvement in Spain, as well as the impact of the current diet on the N cycle, was carried out., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Siloxanes and trimethylsilanol belong to a family of organic silicone compounds that are currently used extensively in industry. Those that are prone to volatilisation become minor compounds in biogas adversely affecting energetic applications. However, non-standard analytical methodologies are available to analyse biogas-based gaseous matrixes. To this end, different sampling techniques (adsorbent tubes, impingers and tedlar bags) were compared using two different configurations: sampling directly from the biogas source or from a 200 L tedlar bag filled with biogas and homogenised. No significant differences were apparent between the two sampling configurations. The adsorbent tubes performed better than the tedlar bags and impingers, particularly for quantifying low concentrations. A method for the speciation of silicon compounds in biogas was developed using gas chromatography coupled with mass spectrometry working in dual scan/single ion monitoring mode. The optimised conditions could separate and quantify eight siloxane compounds (L2, L3, L4, L5, D3, D4, D5 and D6) and trimethylsilanol within fourteen minutes. Biogas from five waste water treatment plants located in Spain, France and England was sampled and analysed using the developed methodology. The siloxane concentrations in the biogas samples were influenced by the anaerobic digestion temperature, as well as the nature and composition of the sewage inlet. Siloxanes D4 and D5 were the most abundant, ranging in concentration from 1.5 to 10.1 and 10.8 to 124.0 mg Nm(-3), respectively, and exceeding the tolerance limit of most energy conversion systems., (Copyright © 2013 Elsevier B.V. All rights reserved.)