Search

This study examines the precision of spatial data required for archaeological sites in Finland from a forest management perspective, identifies archaeological sites at risk due to forestry activities, and investigates potential collaboration between archaeology and forestry to enhance the preservation and understanding of these sites. Due to outdated methods and the lack of systematic field surveys, challenges in achieving accurate spatial data for archaeological sites are highlighted through a literature review, case studies, and fieldwork. Our findings indicate that a significant portion of sites lack boundary delineation, exposing them to the risk of destruction. Moreover, the study reveals limited collaboration between the archaeology and forestry sectors, despite mutual interests in site preservation. We advocate for improved spatial data accuracy using modern technological methods like precision GPS and enhanced cooperation between archaeologists and forestry professionals. This approach aims to protect Finland's archaeological heritage while promoting responsible forestry practices. Notably, fieldwork enabled the precise determination of the location of Finland's first separate plague cemetery, underscoring the value of direct field verification in enriching historical and archaeological understanding. [ABSTRACT FROM AUTHOR]

The primary purpose of this study is to open the discussion of FAIR principles in Finnish archaeology. This topic has not yet been actively discussed in Finnish archaeology. In this study, we were testing whether adding keywords could increase the reusability of the Register of Ancient Sites, as the reusability level of the current register is low. The case study focuses on creating an overview of the Iron Age sites in the Itä-Häme area. Keywords were added for all of the 585 archaeological sites in the study area, based on field reports and find catalogues. After giving keywords to all of the sites, it was possible to make queries from the register and form a new, more detailed overview of the Iron Age sites in the Itä-Häme area. Our study revealed mistakes and ambiguities in the register, but adding keywords increased its reusability. However, it cannot solve the main issue: basic research has not been carried out extensively enough in Finland. Based on the overview, it can be seen that Itä-Häme was an active and important area in the Iron Age, and an especially meaningful possible new site type was identified; however, more research in this area is needed. [ABSTRACT FROM AUTHOR]

Reviewing forest carbon sinks is of the utmost importance in efforts to control climate change. This study focuses on reporting the 20-year boreal forest growth values acquired with airborne laser scanning (ALS). The growth was examined on the Kalkkinen research site in southern Finland as a continuation of several earlier growth studies performed in the same area. The data for the study were gathered with three totally different airborne laser scanning systems, namely using Toposys-I Falcon in June 2000 and Riegl VUX-1HA and miniVUX-3UAV in June 2021 with approximate point densities of 11, 1360, and 460 points/m2, respectively. The ALS point cloud was preprocessed to identify individual trees, from each of which different features were extracted either for direct or indirect growth measurement. In the direct method, the growth value is predicted based on differences of features, whereas in the indirect method, the growth value is obtained by subtracting the results of two independent predictions of different years. The growth in individual tree attributes, such as growth in height, diameter at breast height (DBH), and stem volume, were calculated for direct estimation. Field reference campaigns were performed in the summer of 2001 and in November 2021 to validate the obtained growth values. The study showed that long-term series growth of height, DBH, and stem volume are possible to record with a high-to-moderate coefficient of determination ( R 2 ) of 0.90, 0.48, and 0.45 in the best-case scenarios. The respective root-mean-squared errors (RMSE) values were 0.98 m, 0.02 m, and 0.17 m3, and the biases were −0.06 m, 0.00 m, and 0.17 m3. The direct method produced better metrics in terms of RMSE-% and bias, but the indirect method produced better best-fit lines. Additionally, the mean growth values for height, diameter, and stem volume intervals were compared, and they are presumed to be usable even for forest modelling. [ABSTRACT FROM AUTHOR]

The frequency and intensity of insect outbreaks have increased in boreal forests, along with associated impacts on the growth and economic losses of host trees. In Finland, the common pine sawfly (Diprion pini L.) is a serious pest, causing declines in health and growth responses of Scots pine (Pinus sylvestris L.). We focused on investigating the species' defoliating impact on tree radial and volume growth and estimated the economic value of the declined growth. Managed P. sylvestris forests in our study area in eastern Finland have suffered from extended defoliation by D. pini for 15 years since 1999 at varying intensity levels. We classified 184 trees into four defoliation classes and compared annual growth, expressed as growth indices between the classes. We modelled tree volume, estimated economic loss, and compared those to a reference period preceding the initial outbreak. We found significant differences in growth indices between the defoliation classes. Growth losses of 4.2%, 20.8%, and 40.4% were obtained for the mild, moderate, and high defoliation classes, with related economic impacts of 51 €, 272 €, and 734 € per ha for 11 years, respectively. Growth was slightly enhanced in the lowest defoliation class. We suggest that growth-related economic loss caused by D. pini may be significant and depend on defoliation intensity and outbreak duration. [ABSTRACT FROM AUTHOR]

The demand for cost-efficient forest aboveground biomass (AGB) prediction methods is growing worldwide. The National Land Survey of Finland (NLS) began collecting airborne laser scanning (ALS) data throughout Finland in 2008 to provide a new high-detailed terrain elevation model. Similar data sets are being collected in an increasing number of countries worldwide. These data sets offer great potential in forest mapping related applications. The objectives of our study were (i) to evaluate the AGB component prediction accuracy at a resolution of 300 m2 using sparse density, leaf-off ALS data (collected by NLS) derived metrics as predictor variables; (ii) to compare prediction accuracies with existing large-scale forest mapping techniques (Multi-source National Forest Inventory, MS-NFI) based on Landsat TM satellite imagery; and (iii) to evaluate the accuracy and effect of canopy height model (CHM) derived metrics on AGB component prediction when ALS data were acquired with multiple sensors and varying scanning parameters. Results showed that ALS point metrics can be used to predict component AGBs with an accuracy of 29.7%-48.3%. AGB prediction accuracy was slightly improved using CHM-derived metrics but CHM metrics had a more clear effect on the estimated bias. Compared to the MS-NFI, the prediction accuracy was considerably higher, which was caused by differences in the remote sensing data utilized. [ABSTRACT FROM AUTHOR]

During the past decade in forest mapping and monitoring applications, the ability to acquire spatially accurate, 3D remote-sensing information by means of laser scanning, digital stereo imagery and radar imagery has been a major turning point. These 3D data sets that use single- or multi-temporal point clouds enable a wide range of applications when combined with other geoinformation and logging machine-measured data. New technologies enable precision forestry, which can be defined as a method to accurately determine characteristics of forests and treatments at stand, sub-stand or individual tree level. In precision forestry, even individual tree-level assessments can be used for simulation and optimization models of the forest management decision support system. At the moment, the forest industry in Finland is looking forward to next generation's forest inventory techniques to improve the current wood procurement practices. Our vision is that in the future, the data solution for detailed forest management and wood procurement will be to use multi-source and -sensor information. In this communication, we review our recent findings and describe our future vision in precision forestry research in Finland. [ABSTRACT FROM AUTHOR]

Forest disturbances caused by pest insects are threatening ecosystem stability, sustainable forest management and economic return in boreal forests. Climate change and increased extreme weather patterns can magnify the intensity of forest disturbances, particularly at higher latitudes. Due to rapid responses to elevating temperatures, forest insect pests can flexibly change their survival, dispersal and geographic distributions. The outbreak pattern of forest pests in Finland has evidently changed during the last decade. Projection of shifts in distributions of insect-caused forest damages has become a critical issue in the field of forest research. The Common pine sawfly (Diprion pini L.) (Hymenoptera, Diprionidae) is regarded as a significant threat to boreal pine forests. Defoliation by D. pini has resulted in severe growth loss and mortality of Scots pine (Pinus sylvestris L.) (Pinaceae) in eastern Finland. In this study, tree-wise defoliation was estimated for five different needle loss category classification schemes and for 10 different simulated airborne laser scanning (ALS) pulse densities. The nearest neighbor (NN) approach, a nonparametric estimation method, was used for estimating needle loss of 701 Scots pines, using the means of individual tree features derived from ALS data. The Random Forest (RF) method was applied in NN-search. For the full dense data (+20 pulses/m2), the overall estimation accuracies for tree-wise defoliation level varied between 71.0% and 86.5% (kappa-values of 0.56 and 0.57, respectively), depending on the classification scheme. The overall classification accuracies for two class estimation with different ALS pulse densities varied between 82.8% and 83.7% (kappa-values of 0.62 and 0.67, respectively). We conclude that ALS-based estimation of needle losses may be of acceptable accuracy for individual trees. Our method did not appear sensitive to the applied pulse densities. [ABSTRACT FROM AUTHOR]

The use of multitemporal LiDAR data in forest-monitoring applications has been so far largely unexplored. In this work, we aimed to develop and test a simple method for the detection of snow-induced canopy changes by employing bitemporal LiDAR data acquired in 2006-2010. Our study area was located in southern Finland (62°N, 24°E), where snow-induced damage occurred in 10 permanent Scots pine ( Pinus sylvestris)-dominated plots in winter 2009-2010. For the detection of snow-damaged crowns, we developed a ∆CHM method by contrasting bitemporal LiDAR canopy height models (CHMs) and analyzing the resulting difference image, using binary image operations to extract the damaged crowns. Furthermore, we examined the structural and spatial factors that could explain snow damage at the individual tree level. The ∆CHM method developed is based on two threshold parameters, i.e., the required height difference in the contrasted CHMs and the minimum plausible area of damage. When testing the performance of ∆CHM method, we found that the plot-level omission error rates were 19-75%, while the commission error rates were 0-21%. Furthermore, the relative estimation accuracy of the damaged crown projection area (DCPA) ranged from −16.4 to 5.4%. The observed damage could be explained at tree level by stem tapering, relative tree size, and local stand density. To conclude, ∆CHM method developed constitutes a potential tool for the monitoring of structural canopy changes in the dominant tree layer if dense multitemporal LiDAR data are available. [ABSTRACT FROM AUTHOR]

We present two improvements for laser-based forest inventory. The first improvement is based on using last pulse data for tree detection. When trees overlap, the surface model between the trees corresponding to the first pulse stays high, whereas the corresponding model from the last pulse results in a drop in elevation, due to its better penetration between the trees. This drop in elevation can be used for separating trees. In a test carried out in Evo, Southern Finland, we used 292 forests plots consisting of more than 5,500 trees and airborne laser scanning (ALS) data comprised of 12.7 emitted laser pulses per m2. With last pulse data, an improvement of 6% for individual tree detection was obtained when compared to using first pulse data. The improvement increased with an increasing number of stems per plot and with decreasing diameter breast height (DBH). The results confirm that there is also substantial information for tree detection in last pulse data. The second improvement is based on the use of individual tree-based features in addition to the statistical point height metrics in area-based prediction of forest variables. The commonly-used ALS point height metrics and individual tree-based features were fused into the non-parametric estimation of forest variables. By using only four individual tree-based features, stem volume estimation improved when compared to the use of statistical point height metrics. For DBH estimation, the point height metrics and individual tree-based features complemented each other. Predictions were validated at plot level. [ABSTRACT FROM AUTHOR]

The objective was to investigate the error sources of the airborne laser scanning based individual tree detection (ITD), and its effects on forest management planning calculations. The investigated error sources were detection of trees (etd), error in tree height prediction (eh) and error in tree diameter prediction (ed). The effects of errors were analyzed with Monte Carlo simulations. etd was modeled empirically based on a tree's relative size. A total of five different tree detection scenarios were tested. Effect of eh was investigated using 5% and 0% and effect of ed using 20%, 15%, 10%, 5%, 0% error levels, respectively. The research material comprised 15 forest stands located in Southern Finland. Measurements of 5,300 trees and their timber assortments were utilized as a starting point for the Monte Carlo simulated ITD inventories. ITD carried out for the same study area provided a starting point (Scenario 1) for etd. In Scenario 1, 60.2% from stem number and 75.9% from total volume (Vtotal) were detected. When the only error source was etd (tree detection varying from 75.9% to 100% of Vtotal), root mean square errors (RMSEs) in stand characteristics ranged between the scenarios from 32.4% to 0.6%, 29.0% to 0.5%, 7.8% to 0.2% and 5.4% to 0.1% in stand basal area (BA), Vtotal, mean height (Hg) and mean diameter (Dg), respectively. Saw wood volume RMSE varied from 25.1% to 0.2%, as pulp wood volume respective varied from 37.8% to 1.0% when errors stemmed only from etd. The effect of ed was most significant for Vtotal and BA and the decrease in RMSE was from 12.0% to 0.6% (BA) and from 10.9% to 0.5% (Vtotal) in the most accurate tree detection scenario when ed varied from 20% to 0%. The effect of increased accuracy in tree height prediction was minor for all the stand characteristics. The results show that the most important error source in ITD is tree detection. At stand level, unbiased predictions for tree height and diameter are enough, given the present tree detection accuracy. [ABSTRACT FROM AUTHOR]

Airborne laser scanning (ALS) has been used in recent years to acquire accurate remote-sensing material for carrying out practical forest inventories. Still, much of the information needed in forest management planning must be collected in the field. For example, forest management proposals are often determined in the field by an expert. In the present study, statistical features extracted from ALS data were used in logistic regression models and in nonparametric k-MSN estimation to predict the thinning maturity of stands. The research material consisted of 381 treewise measured circular plots in young and advanced thinning stands from the vicinity of Evo, in southern Finland. Timing of thinning was determined in the field by an expert and coded as a binary variable. Models were developed (1) to locate stands that will reach thinning maturity within the next 10-year period and (2) for stands in which thinning should be done immediately. For comparison purposes, logistic regression models were formulated from accurately field-measured stand characteristics. Logistic regression models based on ALS features predicted the thinning maturity with a classification accuracy of 79% (1) and 83% (2). The respective percentages were 66% and 83% with models based on field-measured stand characteristics and 70% and 86% with k-MSN. The study showed that ALS data can be used to predict stand-thinning maturity in a practical way. [ABSTRACT FROM AUTHOR]

Approaches to deriving forest information from laser scanner data have generally made use of two methods: the area-based and individual tree-based approaches. In this paper, these two methods were evaluated and compared for their abilities to predict forest attributes at the plot level using the same datasets. Airborne laser scanner data were collected over the Evo forest area, southern Finland, with an averaging point density of 2.6 points/m2. Mean height, mean diameter and volume were predicted from laser-derived features for plots (area-based method) or tree height, diameter at breast height and volume for individual trees (individual tree-based method) using random forests technique. To evaluate and compare the two forest inventory methods, the root-mean-squared error (RMSE) and correlation coefficient (R) between the predicted and observed plot-level values were computed. The results indicated that both area-based method (with an RMSE of 6.42% for mean height, 10.32% for mean diameter and 20.90% for volume) and individual tree-based method (with an RMSE of 5.69% for mean height, 10.77% for mean diameter and 18.55% for volume) produced promising and compatible results. Increase in point density is expected to increase the accuracy of the individual tree-based technique more than that of the area-based technique. [ABSTRACT FROM AUTHOR]

Abstract: Boreal mires encompass high diversity in species and habitats, many of which are endangered. In Finland, extensive use of peatlands has resulted in habitat fragmentation. A need for accurate and cost-efficient vegetation mapping and monitoring of habitat changes exists in mire conservation, restoration and peatland forestry. LiDAR is an emerging and excellent tool for probing the geometry of vegetation and terrain. Modern systems measure the backscattered signal accurately and also provide radiometric information. Experiments were carried out in a complex minerotrophic–ombrotrophic eccentric raised bog in southern Finland (61°47′N, 24.18′E). First, we tested discrete-return LiDAR for the modeling of mire surface patterns and the detection of hummocks and hollows, as well as the effect of mire plants on the Z accuracy of the surface echoes. Secondly, the response of different mire vegetation samples in LiDAR intensity was examined. Thirdly, we tested area-based geometric and radiometric features in supervised classification of mire habitats to discover the meaningful variables. The vertical accuracy of LiDAR in mire surface modeling was high: 0.05–0.10m. A binary hummock-hollow model that was estimated from a LiDAR-based elevation model matched flawlessly in aerial images and had moderate explanatory power in habitat classification trials. The intensity of LiDAR in open-mire vegetation was mainly influenced by the surface moisture, and separation of vegetation classes spanning from ombrotrophic to mesotrophic vegetation proved to be difficult. Area-based features that characterize the height distribution of LiDAR points in the canopy were the strongest explanatory variables in the classification of 21 diverse mire site types. Actual qualifying differences in the ground flora were unattainable in the LiDAR data, which resulted in inferior accuracy in the characterization of ecohydrological conditions and nutrient level of open mires and sparsely forested wet sites. Mire habitat classification accuracy with LiDAR surpassed earlier results with optical data. The results suggested that LiDAR constitutes an efficient aid for monitoring applications. We propose the co-use of images and LiDAR for enhanced mapping of open mires and tree species. In situ calibration and validation procedures are required until invariant geometric and radiometric features are discovered. [Copyright &y& Elsevier]

Drainage-driven changes in peatland ecosystems in Finland were studied, using aerial photographs taken in 1995 and 1946. The species composition of the vegetation cover was examined in one drained and one undrained mire in 1995. The data were correlated with tone and texture values of digitized colour infrared aerial photographs taken the same year, using canonical correspondence analysis. The results obtained were used to reconstruct the vegetation cover of the aerial photograph from 1946. The analysis clearly differentiated drained and undrained mire site types from each other, forming the moisture gradient in the first axis. The undrained mire site types were distributed along the nutrient gradient, but the correlation between site types and different tone values was relatively weak. The main difference between 1946 and 1995 was that the open and sparsely forested peatland vegetation types diminished and two drained mire site types (drained, pine-dominated Vaccinium type and drained, pine-dominated dwarf shrub type) became dominant. Digitized aerial photographs were unable to identify the vegetation at the mire site-type level, especially in natural habitats. [ABSTRACT FROM AUTHOR]

Abstract: During spring and summer 2003 severe drought-caused damage was observed in the park forests of the city of Helsinki; especially in barren site pine and spruce stands. The objectives of this study were to map and document the extent of the damage through the use of existing geographical information, digital aerial photography and field surveys and to examine the feasibility of assessing drought damage by visual interpretation of digital aerial photography. Our aim was also to assess the reasons for drought damage in Helsinki city park forests using geographic information system (GIS) analyses of existing interpretative and geographical data, i.e. digital aerial photographs, rainfall statistics and the compartmentwise GIS database of the park forest site and soil types. The total amount of area falling into serious damage classes represented approximately 25ha (the total forested area in Helsinki is about 3700ha). A majority of these areas were located on rocky sites having low stem volumes. The total proportion of damaged stock volume was estimated as 17 300m3, which is 3.3% of the total stock volume in the study area. An accuracy assessment showed that visual interpretation of digital aerial photos is an excellent tool for assessing drought damage. The mean estimation error was 0.7 classes, and errors comprising ⩽2 classes were found in all test grids. The overall correct percentage of photointerpretation was 46%, and estimation was unbiased (kappa 0.264). The forest site and soil type together with the tree species on site showed the greatest correlation with drought damage. The drier and more barren the site, the more likely that damage will occur. Roadside forests were in better condition than areas located further off the roads. Hills clearly impacted the condition of the trees through soil type and flow. [Copyright &y& Elsevier]

Large and comprehensive datasets, traditionally based on destructive stem analysis or other labor-intensive approaches, are commonly considered as a necessity in developing stem-volume equations. The aim here was to investigate how a decreasing number of sample trees affects parametrizing an existing taper curve equation and resultant stem-volume estimates. Furthermore, the potential of terrestrial laser scanning (TLS) in producing taper curves was examined. A TLS-based taper curve was derived for 246 Scots pines (Pinus sylvestris L.) from southern Finland to parametrize an existing taper curve equation. To assess sensitivity of the parametrization regarding sample size, the number of Scots pines included in the parametrization varied between full census and 1 Scots pine at a time. Root mean square error of stem-volume estimates remained ≤20.9% and the mean absolute difference was relatively constant (≤9.0%) between stem-volume estimates when the sample size included ≥46 Scots pines. Thus, it can be concluded that, with a rather small sample size, a taper curve equation can be re-parametrized for local conditions using point clouds from TLS to produce consistent stem-volume estimates. [ABSTRACT FROM AUTHOR]

Information on wood properties is crucial in estimating wood quality and forest biomass and thus developing the precision and sustainability of forest management and use. However, wood properties are highly variable between and within trees due to the complexity of wood formation. Therefore, tree-specific field references and spatially transferable models are required to capture the variability of wood quality and forest biomass at multiple scales, entailing high-resolution terrestrial and aerial remote sensing methods. Here, we aimed at identifying select tree traits that indicate wood properties (i.e. wood quality indicators) with a combination of terrestrial laser scanning (TLS) and airborne laser scanning (ALS) in an examination of 27 even-aged, managed Scots pine (Pinus sylvestris L.) stands in southern Finland. We derived the wood quality indicators from tree models sampled systematically from TLS data and built prediction models with respect to individual crown features delineated from ALS data. The models were incapable of predicting explicit branching parameters (height of the lowest dead branch R2 = 0.25, maximum branch diameter R2 = 0.03) but were suited to predicting stem and crown dimensions from stand, tree, and competition factors (diameter at breast height and sawlog volume R2 = 0.5, and live crown base height R2 = 0.4). We were able to identify the effect of canopy closure on crown longevity and stem growth, which are pivotal to the variability of several wood properties in managed forests. We discussed how the fusions of high-resolution remote sensing methods may be used to enhance sustainable management and use of natural resources in the changing environment. • Stem and crown descriptors were predicted using terrestrial and airborne lidar. • The variability of wood properties was inferred from predicted tree variables. • Canopy closure was identified pivotal to the variability of wood properties. • Remote sensing of wood properties could improve the sustainability of forestry. [ABSTRACT FROM AUTHOR]