Search

For the first time in the sixty years since the synthesis of stishovite, we report unambiguous evidence of stishovite formed in the deep Earth. A minimum pressure of about 7.5 GPa at 1000 °C is necessary for the formation of stishovite, corresponding to a depth of about 230 km. In this manuscript we report the identification of stishovite along with coesite as inclusions in mineral grains from the Waldheim granulite. This implies that the stishovite was transported upwards, probably very rapidly to a depth of about 130 km, corresponding to the highest pressure indicated by newly identified coesite in the prismatine of the Waldheim granulite, and continuing up to the depth of emplacement of the Waldheim prismatine granulite. The analysis of the Raman spectra obtained from a metastable trapped stishovite micro-crystal show that all the diagnostic Raman bands are present. However, given the metastability of the stishovite at room temperatures and pressures, this mineral breaks down step-by-step into stable polymorphs, first coesite and then quartz and cristobalite, during the Raman stimulation. The rare coesite crystals in prismatine have also resulted from the irreversible transformation from stishovite. Although the Waldheim occurrence may be unique, we suggest that Raman analysis of co-trapped crystals in similar deep-seated rocks, an area of limited previous research, may prove an important innovation in the study of mantle processes. [ABSTRACT FROM AUTHOR]

Textures and whole-rock chemistry, as well as mineral composition, were analyzed in megaspherulites (high-temperature crystallization domains [HTCDs]) that formed in different geographical and geotectonic contexts and during different geological periods (Silver Cliff, CO, USA—Paleogene; El Quevar, Argentina—Miocene; Meissen Volcanic Complex, Germany—Late Carboniferous). All of these megaspherulites have formed exclusively in rhyolitic lava, and their mineral composition is dominated by K-feldspar (sanidine) and SiO2 phases (quartz, cristobalite, tridymite). All megaspherulites represent composite HTCDs, comprising three zones: inner domain (ID), outer domain (OD), and a marginal domain (MD). Early evolution of megaspherulites is characterized by either central cavities and sector- to full-sphere spherulites or dendritic quartz-sanidine domains. The latter consist of bundles of fibrils each radiating from a single point reflecting relatively high growth rates. A common feature of OD and MD of all three megaspherulite occurrences is autocyclic banding. It mainly comprises fibrous (≤ 100 μm length), radially oriented sanidine and quartz, which formed at a temperature close to glass transition temperature (Tg). The termination of megaspherulite growth is marked by centimeter-sized sector-sphere spherulites on the surface. Megaspherulite formation requires limited nucleation, which is probably related to the low phenocryst content of the hosting lava. Latent heat from overlying crystallizing lithoidal rhyolite maintained low undercooling conditions keeping nucleation density low and facilitating high diffusion and growth rates. Late megaspherulite growth and its termination under low diffusion conditions is controlled by cooling close to Tg. Calculations based on literature data suggest that the megaspherulite growth presumably lasted less than 60 years, perhaps 30 to 40 years. [ABSTRACT FROM AUTHOR]

Quartz and cristobalite ballen aggregates surrounded by dendritic cristobalite in gneiss clasts of impact melt rocks from the Ries impact structure are analyzed by Raman spectroscopy, microscopy, and electron backscattered diffraction to elucidate the development of the characteristic polycrystalline ballen that are defined by curved interfaces between each other. We suggest that the investigated ballen aggregates represent former fluid inclusion‐rich quartz grains from the granitic gneiss protolith. Upon shock loading, they transformed into an amorphous phase that partly retained information on the precursor structure. Volatiles from inclusions dissolved into the amorphous phase. During decompression and cooling, dehydration takes place and causes fracturing of the amorphous phase and disintegration into small globular ballen, with the fluid being expelled along the fractures. A similar formation of small globules due to dehydration of silica‐rich glass is known for perlitic structures of volcanic rocks. Remnants of the precursor structure are present in the amorphous phase and enabled topotactic crystallization of quartz, leading to a crystallographic preferred orientation. Crystallization of more distorted parts of the amorphous phase led to random orientations of the quartz crystals. Ballen comprised of cristobalite formed from a dehydrated amorphous phase with no structural memory of the precursor. Dendritic cristobalite exclusively occurring at the rim of quartz ballen aggregate is interpreted to have crystallized directly from a melt enriched in fluids that were expelled during dehydration of the amorphous phase. [ABSTRACT FROM AUTHOR]

Abstract: Fifty crucible fragments and 10 fragments of the melting furnace of the forest glassworks of Südel (1723–1741, Ct. Luzern), were analyzed by petrographic, mineralogical and chemical techniques in order to assess the temperature reached in the melting chamber and to find out which raw materials were used to make the crucibles and the melting furnace. Since the crucibles were used in the melting furnace, the temperature estimations were based on both the crucibles and the refractory fragments, as they were parts of the same system. The temperature range in the melting chamber, estimated by the structural order of the new-formed cristobalite, points to a temperature range between 1350 and 1500 °C. However, three crucible samples recorded extreme temperatures as high as 1650 °C, suggesting very high flame temperatures for wood fuel. The analyzed red bricks were made with local calcium-poor clay. One of them was tempered with refractory fragments, demonstrating an in-house production and the recycling of such a material after its use. The crucibles and the refractory bricks were made with the same refractory clay. The former using unprocessed clay and the latter blending clay with chamotte. A comparison with Sidérolithique clayey sand samples from the Swiss Jura, shows strong affinities which may rule out the archaeological hypothesis of an exclusive provenance of such clays from Germany, suggesting an import from the Swiss Jura mountains. [Copyright &y& Elsevier]