Search

This study defined the height ratio of soft-rock strata and established a numerical model for analyzing shield construction in upper-soft, lower-hard composite strata together with field monitoring data. In this way, the influence of shield tunneling while passing under the pile foundation of the culvert at a short distance (the shortest distance is 1.4 m) in the typical upper-soft, lower-hard composite strata in Guangzhou can be examined. Moreover, the reinforcement effects of the ground, the bridges, and the culverts, using the strata-reinforcing plan dominated by the metro jet system (MJS) in a narrow space, are evaluated. Based on the results, (i) the maximum ground subsidence is found at the position in which the height ratio of the soft rock is 1.0. (ii) However, differential subsidence might be found in the subsequent shield construction when the soft-rock height ratio of the adjacent excavated surface ranges from 0 to 0.2 and from 0.5 to 1. (iii) The concentrated release of stress has a greater impact on the structure than the geological conditions of the shield tunneling face. (iv) Reinforcing with the MJS method contains the concentrated release of stress. This study can provide a reference for controlling the deformation of the under-crossing structure in the shield construction of the upper-soft, lower-hard composite strata. [ABSTRACT FROM AUTHOR]

Ground deformation and additional stress on the segments of the firstly constructed tunnel may change significantly due to the construction of another tunnel, which is closely spaced with the existing one. A poor geotechnical condition possibly leads to the interaction between such closely spaced tunnels even making it harder to build such tunnels. A practical project located in Guangzhou City, China, consists of such two parallel tunnels with the smallest distance of 2.6 m, which sat on an upper-soft and lower-hard stratum. A 3D finite element model has been proposed to numerically investigate the behavior of these two parallel tunnels. The numerical results predicted by the FE model are in close agreement with that obtained from the field monitoring system, indicating the accuracy of the proposed FE model. The FE model was then used to further analyze the effect of reinforcing piles in eliminating the detrimental effect on both ground deformation and additional stress of the segments of the existing tunnel as a result of the construction of the new parallel tunnel. The research results obtained from the present paper can provide technical support and guidance for urban subway construction. [ABSTRACT FROM AUTHOR]

Ground deformation and additional stress on the segments of the firstly constructed tunnel may change significantly due to the construction of another tunnel, which is closely spaced with the existing one. A poor geotechnical condition possibly leads to the interaction between such closely spaced tunnels even making it harder to build such tunnels. A practical project located in Guangzhou City, China, consists of such two parallel tunnels with the smallest distance of 2.6 m, which sat on an upper-soft and lower-hard stratum. A 3D finite element model has been proposed to numerically investigate the behavior of these two parallel tunnels. The numerical results predicted by the FE model are in close agreement with that obtained from the field monitoring system, indicating the accuracy of the proposed FE model. The FE model was then used to further analyze the effect of reinforcing piles in eliminating the detrimental effect on both ground deformation and additional stress of the segments of the existing tunnel as a result of the construction of the new parallel tunnel. The research results obtained from the present paper can provide technical support and guidance for urban subway construction. [ABSTRACT FROM AUTHOR]