Search

Non-renewable resources such as natural stone and asphalt are in short supply. Recycling technology, with its lower cost, has been used as the primary approach to asphalt pavement maintenance engineering. The inclusion of reclaimed asphalt pavement materials in producing new asphalt pavements may increase the risk of cracking. The strength and toughness of the asphalt mixture can be reduced. In this study, Hamburg wheel tracking tests (HWTT) were performed on rejuvenated asphalt mixtures with distinct maintenance processes. Different kinds of fibers have been used as additives to reinforce the rejuvenated asphalt mixtures. The HWTT rutting curve was identified as having three stages, including the post-compaction stage, the creep stage, and the stripping stage. The three-stage rutting curve model was used to determine the intersection point between the creep stage and stripping stage. The other two feature points (i.e., the post-compaction point and the stripping inflection point) were redefined with a new calculation method. Then, the rutting effect and stripping effect were separated with these feature points. The performance and economic benefits of fiber-reinforced rejuvenated asphalt mixtures were investigated through grey correlation analysis under the three maintenance processes. The feature points of the HWTT curve and the cost of the corresponding maintenance process were selected as the impact factors. Finally, the optimal scheme was developed by analyzing the influence of each factor on both performance and economic benefits. [ABSTRACT FROM AUTHOR]

To evaluate the long-term performances of different polymer-modified asphalt mixtures, three modifiers were chosen to modify AC-13 (defined as the asphalt concrete with the aggregate nominal maximum particle size of 13.2 mm); namely, high viscosity modifier (HVM), high modulus modifier (HMM), and anti-rutting agent (ARA). The deformation and cracking resistance of different polymer-modified mixtures were checked at different aging conditions (unaged, short-term aged, and long-term aged for 5, 10, and 15 days respectively). The results of the Hamburg wheel-track test and uniaxial penetration test (UPT) showed that the rutting resistance of all asphalt mixtures changed in a V-shape as the aging progressed. From the unaged stage to the long-term aging stage (5 days), the rutting resistance decreases gradually. While after the long-term aging stage (5 days), the rutting resistance increases gradually. Results from the semicircular bending test (SCB) and the indirect tensile asphalt cracking test (IDEAL-CT) indicated that the cracking resistance of all the mixtures gradually decline with the deepening of the aging degree, indicating that aging weakens the crack resistance of asphalt mixtures. Additionally, test results showed that the rutting resistance of ARA AC-13 (defined as AC-13 containing ARA) is the best, the cracking resistances of ARA AC-13, HMM AC-13 (defined as AC-13 containing HMM) and HVM AC-13 (defined as AC-13 containing HVM) have no significant difference, and different polymer modifiers had different sensitivities to aging due to the polymer content and the type of modifier. The conclusions of this study help to further understand the long-term performance of polymer-modified asphalt mixtures during service life and to help guide the selection of modifiers for mixtures. [ABSTRACT FROM AUTHOR]