Search

Mangroves constitute a unique and important type of coastal wetlands in tropical and subtropical zones worldwide. The abundance of microplastics (MPs) in the mangrove sediments is poorly understood. This study aimed to quantify the role of mangrove root systems in effectively entrapping MPs in the mangrove areas of Tuticorin and Punnakayal Estuary. It investigated the abundance, characteristics, and weathering patterns of MPs in different mangrove sediments. Sediment samples were collected from ten mangrove sites and two control sites without mangroves. Microplastics were extracted from mangrove sediments by density separation method, and then counted and categorized according to their shape, size, and colour. Microplastics were identified in all ten sampling sites. Punnakayal Estuary has a greater MPs concentration (27 ± 2.65 items/kg dw) than Tuticorin (9.33 ± 2.52 items/kg dw). Also, microplastic concentrations are higher in the mangrove sites than in the control sites. Most MPs are fibres with size ranges of 1-2 mm and 2-3 mm dominating. Blue and transparent are the predominant colours. Four polymers were identified, namely polyethylene (PE), polypropylene (PP), polymethyl methaacrylate (PMMA), and polyurethane (PUR). The degree of weathering was confirmed by carbonyl index and the values vary between 0.28 and 1.25 for PE and 0.6 and 1.05 for PP., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

We investigated spatiotemporal variations of microplastics (MPs) in Coromandel Coast, Palk Bay, Gulf of Mannar, and West Coast of Tamil Nadu, India. MPs abundance varies from 37 ± 1.52 to 189 ± 9.02 items/kg in sediment and 23 ± 15.25 to 155.25 ± 4.16 items/L in water. Highest abundance in monsoon by riverine inflow transports plastic waste to the ocean. MPs sizes 0.5-1 mm are dominant in summer with 16 polymers, while 3-4 mm dominates the monsoon with 23 polymers. Carbonyl Index shows high MP oxidation (>0.31), unrelated to spatiotemporal changes. SEM-EDAX shows weathered MPs carrying hazardous metals. High MP diversity (MPDII = 0.77) of Coromandel Coast points to many sources of pollution and the need for immediate control measures. Pollution load values indicate low degree of MP pollution (<10), polymer hazard index shows level III (10-100) and IV (100-1000), and ecological risk assessment shows minor risks (<150) at present., Competing Interests: Declaration of competing interest This is to inform that the authors have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Estuaries are transition zones between freshwater and seawater. There are only few studies on microplastic (MPs) pollution in estuaries. In this study, investigating the spatiotemporal variations of MPs in water, sediment and biota samples of 19 estuaries in Tamil Nadu, India, we assessed the chemical and human exposure risks of MPs. MPs extracted by digestion and density separation and characterized them using microscope, Fourier transform infrared spectroscopy and scanning electron microscopy with energy dispersive analysis of X-rays. MP abundancesin summer and monsoon range from 31.7 ± 3.8 to 154.7 ± 4.2 items/L in water and 51.7 ± 3.6 to 171.4 ± 9.1 items/kg in sediment. Highest MPs abundance is found in water and sediment of the urbanized Adayar estuary. MP levels are higher in monsoon than in summer (P < 0.05) due to the discharge of wastewater via storm water outlets. More small-size MPs are found in summer (<0.5-1 mm) while monsoon has a greater diversity of MP polymers (MPDII: 0.81). MP abundance in fish varies from 0.01 ± 0.003 to 0.15 ± 0.03 items/g, and in shellfish from 0.75 ± 0.12 to 9.7 ± 0.28 items/g. In fish, more MPs are found in intestine than in gill or muscle. Shell fishes contain more MPs than fishes. In all the matrices, fibers of different sizes, and polymers of polyethylene and polypropylene are commonly found. An average local person is likely to ingest 781 items of MPs via fish and 2809 items via shellfish annually. Polymer hazard index shows hazard levels of IV to V indicating the serious MP pollution trend, which poses a risk to the biota. In conclusion, MPs observed in this study show that estuaries are a major pathway for land-derived plastics to reach the ocean. The results will help implement remedial/clean-up measures for the estuary for better ecosystem conservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Microplastics (MPs; particles <5 mm) are widely distributed in various habitats from the land to the oceans. They have even reached the remotest of places, including the deep seas and Polar Regions. Although research on MPs pollution in the marine environment has received widespread attention in recent years, the distribution, sources and ecological risks of MPs in coastal areas remain unclear. This study assessed the abundance, characteristics, sources and ecological risk of MPs in surface waters and sediment of the mainland coast and four island groups comprising the coral reef environment of the Gulf of Mannar (GoM), southeast India. Mean MPs abundance across all 95 sampling sites ranged from 28.4 to 126.6 items L -1 in water and from 31.4 to 137.6 items kg -1 in sediment. MP fibers <2 mm dominated the water, while fragments >3 mm were predominant in sediments. Polyethylene (PE) and polypropylene (PP) were the most common polymers in both matrices. The major proportion of MPs in the GoM derived from land-based sources, with distance to the mainland, coastal population density and improper handling of solid waste being the main factors influencing the abundance of MPs. Polymer Hazard Index (PHI), Pollution Load Index (PLI) and Potential Ecological Risk Index (PERI) were used to assess current levels of MPs. While the GoM has high PHI values (>1000) resulting from MPs with high hazard scores (e.g. polyamide, polystyrene, polyvinyl chloride), the PLI values (1.46 and 1.51) indicate low MPs pollution levels in GoM waters and sediments, and the PERI values (31.7 and 24.4) indicate that this represents a minor ecological risk. The results from the current study enhance our understanding of the characteristics, sources, and associated environmental risks of MPs to marine ecosystems. This data may provide a baseline for future monitoring and the formulation of environmental policy., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Reduction in the impact of human-induced factors is capable of enhancing the environmental health. In view of COVID-19 pandemic, lockdowns were imposed in India. Travel, fishing, tourism and religious activities were halted, while domestic and industrial activities were restricted. Comparison of the pre- and post-lockdown data shows that water parameters such as turbidity, nutrient concentration and microbial levels have come down from pre- to post-lockdown period, and parameters such as dissolved oxygen levels, phytoplankton and fish densities have improved. The concentration of macroplastics has also dropped from the range of 138 ± 4.12 and 616 ± 12.48 items/100 m 2 to 63 ± 3.92 and 347 ± 8.06 items/100 m 2 . Fish density in the reef areas has increased from 406 no. 250 m -2 to 510 no. 250 m -2 . The study allows an insight into the benefits of effective enforcement of various eco-protection regulations and proper management of the marine ecosystems to revive their health for biodiversity conservation and sustainable utilization., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Microplastics (MPs) in the marine environment are ubiquitous. The ingestion of these pollutants by marine organisms has drawn global attention. This work studies the distribution pattern and characteristics of MPs found in the body of the clam Donax cuneatus and its environment in order to understand the possible relationship between the MP concentration in the environment (water and sediment) and that in the clam's body. Samples of D. cuneatus were collected from the coast between Vembar and Periyathazhai in Tuticorin district along GoM. MP concentrations range from 0.6 to 1.3 items/g (wet weight) in clams, 10-30 items/l in water, and 24-235 items/kg in sediment. Small-sized clams contain the highest concentration of MPs. Hence it is hypothesised that allometric relationship exists between body size and MP concentration, depending on the surface-area to volume ratio. MP abundance in clam body has a clear, positive, significant correlation with MP abundance in sediment but not with abundance of MP in water. Microplastics of fiber type with size 100-250 μm have a predominant presence in clams. The study identified ten types of polymers, of which polyethylene is the most common polymer in all sample types. FTIR-ATR spectra and surface morphology indicate that most of the microplastics have been strongly weathered. Energy dispersive X-ray spectroscopy analysis detected heavy metals associated with MPs like Cd, Pb, Cu, Zn, Ni and Fe. Filter-feeding clams like Donax sp. can provide valuable information on the spatial patterns of MP distribution, and so can act as bio-indicators in monitoring MP pollution in coastal areas., Competing Interests: Declaration of competing interest “The authors declare no competing interests.”, (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This study compares the occurrence and characteristics of microplastics (MPs) and heavy metal contaminants in the water and sediment of three habitats (corals, seagrass-beds and near-shores) of Rameswaram Island, India. The overall mean concentration of MPs varies from 24 ± 9 to 96 ± 57 items/L in water, and from 55 ± 21 to 259 ± 88 items/kg in sediment. The value of abundance is the greatest in the coral reef site CR-1 (96 ± 51 items/L; 259 ± 88 items/kg) followed by the seagrass site SG-2 (94 ± 55 items/L; 203 ± 75 items/kg) and the near-shore site St-15 (95 ± 63 items/L; 193 ± 75 items/kg). PE fiber (<1000 μm) is predominant in water, whereas PP fiber and fragment (between 2000 and 5000 μm) dominate the sediment. The SEM images of MPs reveal features which are characteristic of degradation like surface roughness, cracks, protrusions, and chalking, along with surface precipitates of both chemical and biological origin. EDAX images show the presence of Cr, Fe, Hg, Pb, Cu, As and Cd associated with MP surfaces., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Objective: To characterise the environmental presence of hepatitis A virus (HAV) in low- and middle-income countries (LMICs)., Design: Systematic review and meta-analysis., Data Sources: EBSCOhost, PubMed, Scopus, ScienceDirect, Clinical Key and Web of Science were searched. Grey literature was sourced by searching the following electronic databases: Open Grey, National Health Research Database and Mednar., Eligibility Criteria for Including Studies: Cross-sectional and ecological studies reporting HAV environmental presence and conducted in LMICs between January 2005 and May 2019, irrespective of language of publication., Data Extraction and Data Synthesis: Relevant data were extracted from articles meeting the inclusion criteria, and two reviewers independently assessed the studies for risk of bias. High heterogeneity of the extracted data led to the results being reported narratively., Results: A total of 2092 records were retrieved, of which 33 met the inclusion criteria. 21 studies were conducted in Tunisia, India and South Africa, and the rest were from Philippines, Pakistan, Morocco, Chad, Mozambique, Kenya and Uganda. In Tunisian raw sewage samples, the prevalence of HAV ranged from 12% to 68%, with an estimated average detection rate of 50% (95% CI 25 to 75), whereas HAV detection in treated sewage in Tunisia ranged from 23% to 65%, with an estimated average detection rate of 38% (95% CI 20 to 57). The prevalence of HAV detection in South African treated sewage and surface water samples ranged from 4% to 37% and from 16% to 76%, with an estimated average detection rates of 15% (95% CI 1 to 29) and 51% (95% CI 21 to 80), respectively. Over the review period, the estimated average detection rate of environmental HAV presence appeared to have declined by 10%., Conclusion: The quality of included studies was fair, but sampling issues and paucity of data limited the strength of the review findings., Prospero Registration Number: CRD42019119592., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2020. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Microplastics (< 5 mm) are considered to be global environmental pollutants. This study investigates the occurrence, physical properties, polymer composition and surface morphology, and element composition of MPs present in food-grade salts produced from seawater and bore-well water in Tuticorin, Tamil Nadu, Southeast coast of India. Fourteen different brands of sea salts and bore-well salts were collected from the salt manufacturing units. The mean abundance of microplastics was 35 ± 15 to 72 ± 40 items/kg in sea salt and 2 ± 1 to 29 ± 11 items/kg in bore-well salt. Four types of polymers viz. polyethylene (51.6%), polypropylene (25%), polyester (21.8%), and polyamide (1.6%) were found in salt. Polyethylene fibers of size ranging from 100 to 500 µm were observed commonly. Being manufactured from seawater, sea salt had the highest quantities of different microplastic particles. The study reveals that people consume approximately 216 particles of MPs per year via sea salt and 48 items per year via bore-well salt if the average person has a daily salt intake of 5 g. The surface morphology of MPs as exhibited in the SEM-EDAX images obtained in the study revealed the different weathering features of MPs, such as pits, cracks, and particles adhering to the surface. The presence of the elements Fe, As, and Ni on the surfaces as identified by energy-dispersive x-ray spectroscopy indicates that these elements exist in the environment as contaminants and have become associated with the MPs. The trace metals adsorbed onto MPs increase the risks of human exposure and may cause some adverse effects in humans.

This study investigated the microplastic (MP) contamination of seawater and fishes from different habitats so as to understand the level of human exposure to microplastics. Samples of Harpodon nehereus, Chirocentrus dorab, Sardinella albella, Rastrelliger kanagurta, Katsuwonus pelamis and Istiophorus platypterus were collected from Tuticorin, southeast coast of India. The MPs in seawater and the gastrointestinal tracts of fish were identified using Stereomicroscope and characterized by FTIR and SEM-EDAX analysis. The abundance of MPs varied from 3.1 ± 2.3 to 23.7 ± 4.2 items L -1 in water, from 0.11 ± 0.06 to 3.64 ± 1.7 items/individual, and from 0.0002 ± 0.0001 to 0.2 ± 0.03 items/g gut weight. The epipelagic fishes had higher levels of MP contamination than the mesopelagic ones. Most of the MPs identified were of blue color, of fiber type and with their size <500 μm. Polyethylene was the most commonly detected MP, followed by polyester and polyamide, and this fact could be attributed to the inflow of domestic sewage and to the intensive fisheries activities in the area. SEM-EDAX spectra revealed the weathered MP surfaces which could adsorb/leach inorganic elements (colorants and fillers) from/to the environment. We may conclude that the concentration of MPs in fishes is a function of the concentration of MPs in their environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This study investigates the mean concentration and characteristics of macroplastics (>2.5 cm), mesoplastics (5 mm - 2.5 cm) and microplastics (<5 mm) on eight sandy beaches along the shoreline of Tuticorin, Tamil Nadu. Prevalence of plastic litters varies among the study sites depending on the intensity of fishing and other human activities. Mean concentrations of macroplastics (1.38 ± 78 to 6.16 ± 94 items/m 2 ), mesoplastics (2 ± 0.8 to 17 ± 0.11 items/m 2 ) and microplastics (25 ± 1.58 to 83 ± 49 items/m 2 ) were estimated in respect of the polymers composing them namely PE, PP, PET, NY, PS and PVC, of which PE is the most predominant polymer. At Sites 1, 2, 3, 5 and 8 there is correlation between the intensity of fishing activity and the concentrations of macro- (p = 0.02) and microplastics (p = 0.03). Sites 4, 6 and 7 there is correlation established between the degree of recreational activity and the concentrations of meso- (p = 0.02) and microplastics (p = 0.01)., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The objective of this study is to quantify the extent of microplastic (MP) contamination in the Indian edible oyster (Magallana bilineata) and to understand how this relates to the MP contamination in its surrounding marine environment. Samples of water, sediment and oysters of different sizes were collected from three sites along Tuticorin coast in Gulf of Mannar in Southeast India. The mean abundance of MP in oysters was found to be 6.9 ± 3.84 items/individual and the mean concentration to be 0.81 ± 0.45 items/g of tissue. Polyethylene (PE) and polypropylene (PP) fibers were the dominant MP types in oysters (92% and 4%, respectively) and in seawater (75% and 25%, respectively), with PE fibers, ranging from 0.25 to 0.5 mm, being the most common. Both PE and PP are low-density polymers which are slow to sediment to the seafloor. This increases the potential of their availability in the environment and ingestion by the oysters. The largest oysters (14-16 cm) contained the highest abundance and concentrations of MP, suggesting a greater proportion of MP in the water column is ingested with increasing size. The calculated microplastic index (0.02 to 0.99) also indicates that MP bioavailability increases with increasing size of oysters. The distribution patterns of MP abundance, shape and size in oysters more closely resemble those in water than in sediment. The surface morphology of the MPs reveals the characteristic pits and cracks which result from partial degradation through the weathering processes. Energy-dispersive X-ray spectroscopy analysis shows the presence of Ni and Fe in association with MP, and this probably indicates the fly-ash pollution and the petroleum-related activities in the surrounding area. Being sessile animals the oysters are good candidates for use as sentinel organisms for monitoring MP in specific marine environments., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This study undertook to investigate the occurrence of microplastics (MPs) in the high and low-tide sediments of five coastal areas in Tamil Nadu, India. The abundance of microplastics vary from 439 ± 172 to 119 ± 72 (HTL) and 179 ± 68 to 33 ± 30 (LTL) items kg -1 of sediments. The MP polymers found in the study sites are Polyethylene (73.2%), polypropylene (13.8%), nylon (8.2%), polystyrene (2.8%) and polyester (2%). The weathered surfaces might act as high-capacity carriers and this was confirmed by SEM-EDAX. The results of an analysis of the textures of the sediments do not ascribe any influence on microplastic abundance. The recreation, religious and fishing activities are the major contributors to plastic pollution in these beaches, which is borne out by the high abundance of MPs in the study sites. A regular and permanent waste management system should be put in place for the protection of beaches., (Copyright © 2019 Elsevier Ltd. All rights reserved.)