Search

Indigenous communities and their way of life are facing significant challenges due to globalisation, industrialisation and urbanisation, which have forced them to gradually adopt the architecture, lifestyle, and culture of mainstream society. This paper proposes a Smart Vernacular Architecture (SVA) framework and applies it to the indigenous dwellings of the Todas, a tribal community living in India's Nilgiri mountains. The architecture and indoor space quality of these dwellings are investigated in this paper based on specific thermal comfort parameters like the interior temperature and airflow. The indoor temperatures of Toda dwellings are simulated for the predicted climate of 2100 to evaluate their climate resilience. Finally, the paper illustrates the usage of virtual reality (VR) to explore and visualise the Toda settlement and the interior environment parameters of a Toda dwelling to effectively convey and preserve the knowledge of vernacular architecture. In a nutshell, this paper elucidates the advantages of vernacular architecture and construction methods to arouse the interest of academics, policymakers, students, and professionals in preserving architecture, culture, and indigenous knowledge. [ABSTRACT FROM AUTHOR]

Previous research on solar box cookers focusing on the bulk usage of energy storage materials is a costly technique for performance enhancement. Bulk energy storage materials take much time to charge and, thus, result in a low rate of cooking at the start. Therefore, a hot box solar cooker has been developed and experimentally studied for thermal performance enhancement in a hilly region of Uttarakhand, India. A bed of phase change material (paraffin wax) filled with small capsule-shaped containers was prepared (detachable) and placed over the cooking tray of the tested cooker. These containers were vertically positioned over the bed to enhance the heat transfer rate inside the cooker to attain a fast-cooking response. Notably, the combined effect of extended geometry with PCM is an excellent method to increase the efficiency of a solar cooker. As per the author's knowledge, likely techniques have not been studied for a box cooker to achieve a fast-cooking rate in any hilly region up to date. The results of cooking tests show that the cooking plate attained a maximum temperature of about 150 °C. It is because of the combined effect of extended fins (vertical capsules) and PCM filled inside them. The results of the experimental study show that the thermal efficiency of the cooker was found to be about 45.7%, the cooking power was calculated about 54.71 W, the heat transfer coefficient was estimated about 311 W/m 2 °C, and the overall heat loss coefficient was computed about 5.71 W/m 2 °C. This modified cooker costs about $48.19, and the payback period is about 03 years and 11 months. Cooking trials also showed that the present SBC could cook almost all the dishes commonly cooked in Uttarakhand., Competing Interests: Declarations. Ethics approval and consent to participate: Not applicable. Consent for publication: Not applicable. Competing interests: The authors declare no competing interests., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The study aims to examine the thermal performance of solar air heaters employing two different absorber plates under two different configurations. The experiments have been conducted in the summer climatic conditions of Moradabad City, India. A total of about 04 models of solar air heaters have been developed. The experimental investigation has been done using a flat-plate absorber and a serrated geometric absorber (with and without using the tested phase change material) to estimate the thermal performance. Notably, 03 different mass flow rates (i.e., 0.01 kg/s, 0.02 kg/s, and 0.03 kg/s) have been used to investigate the heat transfer coefficient, instantaneous efficiency, and daily efficiencies. Results of the study showed that Model-4 is the best among all the tested models that provide an average exhaust temperature of about 46 °C after sunset. The optimum daily average efficiency has been obtained at about 63% at 0.03 kg/s. The efficiency of a serrated plate-type SAH without using phase change material is about 23% higher than that of a conventional system, while it is about 19% higher than that of a conventional SAH using phase change material. Overall, the modified system is suitable for moderate-temperature applications, like agricultural drying and space heating., Competing Interests: Declarations. Ethics approval and consent to participate: Not applicable. Consent for publication: Not applicable. Competing interests: The authors declare no competing interests., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose -- Heat gain in buildings occurs due to heat transfer through the building fabric or envelope, especially the walls and roof. The purpose of this paper is to identify and recommend the suitable wall materials for better thermal performance in buildings in warm and hot climatic zones of India. As India lies between the tropic of cancer and the equator, the solar radiation from the sun falls more on the walls than the roofs of the buildings. Thus, it is imperative to protect the walls from heat gain to promote thermal comfort in naturally ventilated buildings and reduce the energy loads due to artificial cooling systems in air-conditioned buildings. Design/methodology/approach -- In this paper, an investigation of heat flow characteristics in steadystate and the transient state for five different uninsulated wall structures using computational fluid dynamics (CFD) software has been carried out. The climate conditions at Madurai, India have been considered for this study. Findings -- The findings of the study revealed that aerated autoclaved concrete (AAC) and hollow clay blocks (HCB) for external walls in naturally ventilated buildings in warm climatic regions could improve the building's thermal performance index and reduce peak indoor operative temperature by about 6°C--7°C. The results of steady-state and transient state analysis were found to be in good agreement with the results of the reviewed literature. Research limitations/implications -- Over the past few decades, only very few architects and builders have been successful in influencing their clients to accept alternate materials such as AAC blocks, HCB, stabilized earth blocks, adobe blocks, fly-ash bricks as an alternate to conventional bricks in an attempt of highlighting their benefits, such as; materials that are easily available, more energy-efficient, can withstand the extreme weather conditions, promote thermal comfort and cost-effective. This paper provides strong evidence that AAC and HCB blocks are the most appropriate materials for improving the thermal performance of envelope walls in regions where the outdoor temperatures are above 40°C. Originality/value -- This paper has made an attempt to identify the appropriate wall materials for effective thermal performance in warm and hot climates. A comparative analysis between five different wall types under the existing solar conditions has been analyzed using CFD simulation study in steady-state and transient conditions under summer conditions and the appropriate wall materials have been suggested. There has been no attempt carried out so far to analyze the thermal performance of different walls using 24 h transient approach in CFD. [ABSTRACT FROM AUTHOR]

This work is undertaken with an objective to develop and implement a trained particle swarm optimization (PSO) algorithm for prediction of an optimized set of design and operating parameters for a smooth flat plate solar air heater (SFPSAH). The simulation is carried out based on the basis of the algorithm developed for three different cases using the climatic condition data of the city Hamirpur, India situated between (latitude) 31°25′–31°52′ N and (longitude) 76°18′ to 76°44′ E. The final results obtained from this algorithm are compared with experimental results and found to be satisfactory as far as flexibility, speed and global convergence are concerned. [Copyright &y& Elsevier]

Abstract: Solar passive techniques are being used in vernacular buildings throughout the world. Researchers have done extensive study on thermal performance of vernacular buildings in the different parts of the world. Vernacular architecture of North-Eastern India represents the principle of climate-responsive architecture, which still lacks experimental validation and quantitative analysis. Thermal comfort not only makes the occupants comfortable but also governs energy consumption in the building. Detailed field studies on thermal performances of typical traditional vernacular dwellings in different bioclimatic zones have been undertaken. This field study includes detailed survey of 150 vernacular dwellings, field tests and thermal sensation vote of 300 occupants on ASHRAE thermal sensation scale. Field test includes measurement of temperature, humidity, illumination level and building design parameters. Thermal performances of these vernacular dwellings were evaluated for winter, pre-summer, summer/monsoon and pre-winter months of the year 2008. This evaluation is based on ‘adaptive approach’, which is the outcome of the field studies and is now part of ASHRAE standard 55/2004 for predicting comfortable temperature of naturally ventilated buildings. This study also tried to find out the range of comfort temperature in these vernacular buildings for different season of the year. It has been found that these vernacular dwellings perform quite satisfactorily except in the winter months and the occupants feel comfortable in a wider range of temperature. [Copyright &y& Elsevier]

The use of solar energy in water heating applications, such as in solar-assisted heat pump systems, has great benefits, such as reductions in heat transfer losses, control over incident solar heat, and generation of environmentally benign water heat. In the present study, we performed parametric optimization based on an experimental model of a solar-assisted heat pump system for water heating (SAHPSWH) in the context of colder climatic regions receiving minimal solar radiation. Various parameters were investigated, such as the different glazing arrangements, the distances between fluid-circulating tubes, and the absorber sheet arrangement. The results showed that double glazing was more efficient than single glazing, with average COP values of 3.37 and 2.69, respectively, and with similar heat gain rates. When the evaporator tube was soldered below the absorber plate, the COP was 1.19 times greater than when the tube was soldered above the absorber plate. We also analyzed whether the collector efficiency factor F′ has an inverse relationship with the tube distance and a direct relationship with the absorber plate thickness. Through this experimental study, we verified that the SAHPSWH is reliable if designed judiciously. This promising energy-saving system is particularly suitable for areas abundant in solar radiation, such as in India, where the needs for space conditioning and water heating are constant. [ABSTRACT FROM AUTHOR]

Whether the character of developmental plasticity is adaptive or non-adaptive has often been a matter of controversy. Although thermal developmental plasticity has been studied in Drosophila for several traits, it is not entirely clear how it affects reproductive fitness. We, therefore, investigated how developmental temperature affects reproductive performance (early fecundity and egg-to-adult viability) of wild-caught Drosophila melanogaster We tested competing hypotheses on the character of developmental thermal plasticity using a full-factorial design with three developmental and adulthood temperatures within the natural thermal range of this species. To account for potential intraspecific differences, we examined flies from tropical (India) and temperate (Slovakia) climate zones. Our results show that flies from both populations raised at an intermediate developmental temperature (25°C) have comparable or higher early fecundity and fertility at all tested adulthood temperatures, while lower (17°C) or higher developmental temperatures (29°C) did not entail any advantage under the tested thermal regimes. Importantly, the superior thermal performance of flies raised at 25°C is apparent even after taking two traits positively associated with reproductive output into account: body size and ovariole number. Thus, in D. melanogaster , development at a given temperature does not necessarily provide any advantage in this thermal environment in terms of reproductive fitness. Our findings strongly support the optimal developmental temperature hypothesis, which states that in different thermal environments, the highest fitness is achieved when an organism is raised at its optimal developmental temperature., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2019. Published by The Company of Biologists Ltd.)