Search

Since the 21st century, Lamreh, Aceh Besar Regency, Indonesia played an important role during the maritime silk route at the gate of the Malacca strait. This article investigates the subsurface structure of landslide-prone areas in cultural heritage based on 2D resistivity, chargeability and current density models of ERT, IP and VLF-EM methods, respectively. Field data measurements were carried out on 2 crossing profiles along the cliff suspected of experiencing landslides. The length of each profile is 220 with 4 m distance between stations. The 2D models reveal that the subsurface geological structure of Lamreh is composed of a mixed layer of clastic sediment and volcanic material at the top, followed by a layer of calcareous sandstone, and volcanic breccia at the bottom. The 3 layers are most easily distinguished in the resistivity model. The topmost layer is permeable but dry, i.e., characterized by a more resistive layer in the models. While the second layer is characterized by an intermediate conductivity and the bottom layer is highly conductive. The conductivity in these 2 layers is influenced by the degree of water content within the rocks. The chargeability models derived from IP data can distinguish between the dry layer on the surface and the saturated layer below. Meanwhile, the current density models obtained from VLF-EM data have proven the presence of fractures and faults along the profiles due to weathering as also seen in the resistivity models. [ABSTRACT FROM AUTHOR]

Indonesia's Aceh Province is an earthquake-prone area due to its location on the Great Sumatran Fault (GSF). Currently, earthquake mitigation by the local government constantly refers to the regional seismic hazard maps. However, some sources of an earthquake in the province which had caused damage to buildings and loss of human life were not easily traced to the fault on the surface. Currently, the mapping activities related to the Sumatra fault lines are only focused on the mainland. In contrast, the continuity of the GSF fault in the area of the sea and surrounding islands is very rarely studied. Weh Island is inhabited by many communities and has become a popular tourism area. This study aims to map the regional and local fault structure on the Weh Island using the gravity model plus (GGMPlus) data. We used the GGMPlus data with a resolution of 200 m for detailed mapping of regional and local faults. The 3D inversion of the GGMPlus data was carried out to obtain density parameters using two models, namely Singular Value Decomposition (SVD) and Occam optimization. The 3D inversion describes the presence of high-density rock blocks. A density value ranging between 2.72 - 2.96 gr/cm³ is interpreted as rocks with andesite-basaltic lava composition and lava or pyroclastic breccias resulting from local volcanic products as the rocks creating the island. Therefore, the zone interpreted as a local fault had a smaller density value (2.5 - 2.65 gr/cm³) than the surrounding. [ABSTRACT FROM AUTHOR]

In the northern part of Sumatra Island, Indonesia, the Great Sumatran Fault, which can cause an earthquake, was divided into two segments: the Aceh and Seulimeum. An effort to reduce the risk is mapping the fault area, especially in the region that does not clearly show the sign on the surface, e.g., in the Lamtamot area, Indonesia. Electrical resistivity is widely used to study shallow structures, but the method requires more time when applied in a large area. This research explores the potential of an extremely low frequency (very low frequency-electromagnetic; VLF-EM) method to investigate the shallow fault of the Seulimeum segment. Here, the VLF-EM is compared with other geophysical methods such as resistivity and magnetic methods. For comprehensive results, the geomorphic observation that was conducted covered outcrops of the fault and trenching sites in the geophysical study for validating the model. A similar pattern of the VLFEM and electrical resistivity data has been shown in a two-dimensional profile using data processing. The fault structure can be mapped at a distance of 20-24 m from the profile measurement, which is demonstrated by the low current density associated with the conductive zone from the VLF-EM, and low resistive anomaly in electrical resistivity. The fault can also be confirmed via magnetic intensity, which significantly increases at the same distance (20-25 m) of the VLF-EM and electrical resistivity. The geomorphic observation shows outcrops of fault activity, such as fault scarp, fractures, and faults, in the same direction as the Seulimeum segment, while scrap extends in the northwest direction up to ~20 m around the geophysical surveys. As revealed by the results, the VLF-EM method combined with other geophysical surveys and geomorphic observation can be used as a technique to image the fault that shows the shallow structure of the Seulimeum fault at 20-32 m along the profile. [ABSTRACT FROM AUTHOR]

The area surrounding Jaboi volcano, Indonesia, has been planned for geothermal energy development with capacity of ~ 50 Mwe. Geophysical surveys can contribute to the understanding of the hydrogeology of the area because they can provide information without interferences, which could potentially react to the flow of hot water. In many cases, the occurrence of a hot spring is closely related to its local fault system, which permits the flow of thermal fluid to its surface. This research applied the very low-frequency electromagnetic (VLF–EM) method and then compared it with electrical resistivity data to map fractures, faults, and geological aspects in the Jaboi volcano manifestation area. In tropical areas such as Indonesia, the VLF–EM method has been applied widely in studying subsurface structures. However, it is rarely used in volcanic areas with high terrain conditions even though the mobility of VLF methods is simpler than the electrical resistivity method. At the west side of the volcano, the 2D models from both VLF–EM and electrical resistivity showed the conductive zone (log 0.5–1.5 Ωm) found as a response to the manifestation, which has a similar direction with a local fault known as the Ceuneuhot fault. At the east side, the 2D models from both methods showed a similar conductive zone at depths of 15–25 m, which is caused by the existence of bedrock (> log 2.5 Ωm). The bedrock at depths of 0–10 m inhibits the rise of fluid to the surface so that there is no geothermal manifestation in the other local fault known as the Leumomate fault. In addition, the 2D models from the two methods showed the contrast of some fracture zones as entry and exit points of fluid in the Jaboi volcano. In addition, analysis of Landsat 8 optical images also showed high-temperature values and low vegetation indices in several active craters as indicators of volcanic activity. Based on the processed data, it is concluded that VLF–EM can be used as a fast and accurate method to provide information about near-surface structures in a geothermal field, and it can be used safely to suggest a location for drilling programs or to give contributions to protect geothermal springs. [ABSTRACT FROM AUTHOR]

The Great Sumatran Fault (GSF) activity is a severe threat to Banda Aceh development as the capital city of Aceh Province, Indonesia. The earthquakes originating along this fault trace, despite generating low strength, considerably threaten infrastructure and human lives. Therefore, a detailed study of the GSF activity and presence becomes critical. In this paper, we applied the Global Gravity Model plus (GGMPlus) to map the subsurface structure and modeling of two GSF segments with a resolution of 200 m/px, namely the Aceh and Seulimeum segments toward the north of the Sumatran Island. The Bouguer anomaly data are inconsistent with the geology of the study areas, dominated by igneous rocks on the Aceh segment and volcanic rocks on the Seulimeum segment. Further, the contrast between the Seulimeum segment in the northeast and the Aceh segment in the southwest can be demonstrated by high-pass filtering. The GGMPlus data validation results with field measurements using the Scintrex CG-5 Autograv, the root mean square error obtained via data comparison are 12.32% in the Krueng Raya fault zone, and 26.1% at the Seulawah Agam Volcano area, respectively. We also performed 2D gravity data modeling along with the Aceh and Seulimeum segments in the NW–SE direction. This model was then compared with the geological cross section, seismicity, and magnetotelluric data. The results of Singular Value Decomposition and Occam inversion show three vertical blocks of high densities with an interspersion of lower densities, which can be confirmed as the Aceh and Seulimeum segments. Based on data processing, it can be concluded that the GGMPlus satellite can improve the maps and images of the northernmost GSF structure. [ABSTRACT FROM AUTHOR]

Sabang Municipality is located on Weh Island. As a maritime gateway to Indonesia, the island has been inaugurated as an Integrated Economic Development Zone by the Government. A complete infrastructure has been planned and built to support the manufacturing and tourism industries in the region. On the other hand, the island is potentially affected by geological hazards. Tectonically, the island is crossed by the Great Sumatran Fault (GSF), but few studies have shown the fault trace on the island. To ensure sustainable development, such potential geological hazards have to be incorporated into the Regional Spatial Plan (RSP) of the city. In this study, fault distribution on the island were mapped using shaded relief, slope, lineament extraction, orientation, and Fault Fracture Density (FFD) distribution extracted from the National Digital Elevation Model (DEMNAS) data. The map shows that the island is crossed by several fault lines, but the one located along the eastern with northwest-southeast direction is considered tectonically active. However, according to the RSP, the eastern Weh Island is the most developed area. The city center, airport, seaports, dam, sewerage treatment plan, landfills, and diesel power electricity generator for the city are situated along this fault line. It seems that the RSP of Sabang Municipality was issued without taking into account potential geological hazard maps in it. Some recommendations have been proposed to reduce the impact of losses in the future. [ABSTRACT FROM AUTHOR]

In order to increase the geothermal exploration, the magnetotelluric (MT) method has been used to study the subsurface of the Seulawah Agam volcano, Aceh Province, Indonesia. Similar to all resistivity methods that are based on measuring the electric field on the surface, the MT commonly contains a static shift problem, which is caused by the heterogeneities near the surface and the different topography of the volcano. The static effect can be expressed as a vertical shift from the apparent resistivity curve. In this study, the apparent resistivity data from the 1D inversion of the Transient Electromagnetic (TEM) method were used to correct the static shift problem in the MT data. Both methods were acquired in the same site at ten stations along with a 12 km distance profile that crosses the Seulawah Agam volcano. The north-south profile of the volcano area appeared to host a geothermal system. The 1D inversion in the TEM data shows a low resistivity layer that indicated a cap rock with a thickness up to 1000 m. The area below the cap rock is estimated to be a reservoir zone while the 2D inversion of MT shows that the deep conductor below 2000 m could be the heat source for the Seulawah Agam geothermal system. [ABSTRACT FROM AUTHOR]