Search

Selecting the best structure and parameterization of rainfall–runoff models is not straightforward and depends on a broad number of factors. In this study, the "Modello Idrologico Semi-Distribuito in continuo" (MISDc) was tested on 63 mountainous catchments in the western Po Valley (Italy) and the optimal model parameters were regionalized using different strategies. The model performance was evaluated through several indexes analysing hydrological regime, high-flow condition and flow–duration curve (FDC). In general, MISDc provides a good fit behaviour with a Kling-Gupta Efficiency index greater than 0.5 for 100% and 84% of cases for calibration and validation, respectively. Concerning the regionalization, spatial proximity approach is the most accurate solution obtaining satisfactory performance. Lastly, the predicted FDCs showed an excellent similarity with the observed ones. Results encourage to apply MISDc over the study area for flood forecasting and for assessing water resources availability thanks to the modest computational efforts and data requirements. [ABSTRACT FROM AUTHOR]

In a changing climate, assessing the effects that the variation of the expected rainfalls can cause to slope stability is of primary importance. Precipitations are expected to increase, and, in particular, there will be more events characterised by extreme rainfalls, which legitimates the possibility of an increase in landslide activity. A probabilistic physically based model, which takes into account the uncertainty in soil characterisation, has been applied to a study area in central Italy, forced with different scenarios of expected rainfalls. The results of the prediction are compared in terms of variation of percentage of unstable territory. It is observed that the projection of the expected rainfall produces a general increase of the number of potentially unstable zones. Although many uncertainties in the analyses of the climatic trends and in their related effects at the ground still exist, the presented approach shows that physically based methods can be used to support quantitative projections of the expected impacts. [ABSTRACT FROM AUTHOR]

The development of forecasting models for the evaluation of potential slope instability after rainfall events represents an important issue for the scientific community. This topic has received considerable impetus due to the climate change effect on territories, as several studies demonstrate that an increase in global warming can significantly influence the landslide activity and stability conditions of natural and artificial slopes. A consolidated approach in evaluating rainfall-induced landslide hazard is based on the integration of rainfall forecasts and physically based (PB) predictive models through deterministic laws. However, considering the complex nature of the processes and the high variability of the random quantities involved, probabilistic approaches are recommended in order to obtain reliable predictions. A crucial aspect of the stochastic approach is represented by the definition of appropriate probability density functions (pdfs) to model the uncertainty of the input variables as this may have an important effect on the evaluation of the probability of failure (PoF). The role of the pdf definition on reliability analysis is discussed through a comparison of PoF maps generated using Monte Carlo (MC) simulations performed over a study area located in the Umbria region of central Italy. The study revealed that the use of uniform pdfs for the random input variables, often considered when a detailed geotechnical characterization for the soil is not available, could be inappropriate. [ABSTRACT FROM AUTHOR]

A novel procedure for estimation of the vulnerability to seepage inducing piping processes in earthen levees affected by animal burrows is presented. The proposed methodology combines an available procedure of seepage vulnerability assessment for undamaged levees with the result of a finite element analysis software, which is used for identifying the seepage path and hydraulics head profile of both damaged and undamaged levees. The main steps of the procedure for estimating the impact of burrows in increasing the vulnerability of levees are presented. Twenty‐one levees along the Tanaro River (north‐western Italy) are used as a case study, and the results show that the critical conditions for the onset of inner erosion are achieved for shorter flood durations in damaged levees. If burrows occur, the probability of inner erosion (seepage probability) increases resulting in a potential increase of forming longer tunnels. This approach is a first attempt to quantify the seepage probability of extended levee systems affected by burrows and is applied for simplified geometrical and two‐dimensional representation of the cavities. This procedure can be applied by the hydraulic authorities to set the priorities in levees maintenance. Future research would focus on the analysis of more realistic burrows conditions. [ABSTRACT FROM AUTHOR]

The Mediterranean region has been identified as one of the main climate change hotspots: its sensitivity to global change is high and its evolution remains uncertain. The region experiences many interactions and feedbacks at the oceanic, atmospheric, and hydrological levels, while facing high anthropogenic activities. Analysing the water cycle over the Mediterranean region is of major importance to environmental and socio-economic aspects. The satellite monitoring of the Mediterranean water cycle represents one of the key challenges for the hydrological community.The presentation will show recent results on using satellite soil moisture and precipitation products for hydrometeorological prediction in the Mediterranean region, and particularly for the prediction of floods and landslides. Specifically, we will show the comparison of multiple satellite precipitation products for predicting flood in 100+ basins over the Mediterranean Basin by also using different hydrological models. Moreover, the assessment of satellite precipitation products for predicting the occurrence of landslides in Italy is carried out. Among the investigated satellite products, we have firstly considered state-of-the-art products such as TMPA (TRMM Multisatellite Precipitation Analysis), GPM (Global Precipitation Measurement), and H SAF (EUMETSAT Satellite Application Facility on Support to Operational Hydrology and Water Management). Secondly, we have tested the innovative products using the SM2RAIN algorithm for rainfall retrieval from multiple satellite soil moisture products including ASCAT (Advanced SCATterometer), SMOS (Soil Moisture and Ocean Salinity mission) and SMAP (Soil Moisture Active and Passive mission). [ABSTRACT FROM AUTHOR]

• A Bayesian approach has been used for merging multiple satellite rainfall products. • We created a superior product that can be efficiently run in near-real time. • Soil moisture can provide useful information for improving satellite rainfall. This work investigates the potential of using the Bayesian-based Model Conditional Processor (MCP) for complementing satellite precipitation products with a rainfall dataset derived from satellite soil moisture observations. MCP – which is a Bayesian Inversion approach – was originally developed for predictive uncertainty estimates of water level and discharge to support real-time flood forecasting. It is applied here for the first time to precipitation to provide its probability distribution conditional on multiple satellite precipitation estimates derived from TRMM Multi-Satellite Precipitation Analysis real-time product v.7.0 (3B42RT) and the soil moisture-based rainfall product SM2RAIN-CCI. In MCP, 3B42RT and SM2RAIN-CCI represent a priori information (predictors) about the "true" precipitation (predictand) and are used to provide its real-time a posteriori probabilistic estimate by means of the Bayes theorem. MCP is tested across Italy during a 6-year period (2010–2015) at daily/0.25 deg temporal/spatial scale. Results demonstrate that the proposed methodology provides rainfall estimates that are superior to both 3B42RT (as well as its successor IMERG-early run) and SM2RAIN-CCI in terms of both median bias, random errors and categorical scores. The study confirms that satellite soil moisture-derived rainfall can provide valuable information for improving state-of-the-art satellite precipitation products, thus making them more attractive for water resource management and large scale flood forecasting applications. [ABSTRACT FROM AUTHOR]