Search

Tomato processing involves a significant production of residues, mainly constituted by discarded tomatoes, skins, seeds and pulp. Often, these residues are not valorized and represent an added cost for manufacturing companies because of disposal processes, with environmental issues due to the difficult management. The exploitation of these residual materials results complex as their availability is mainly concentrated in few months. A possible solution is the production of biogas employed in a Combine Heat and Power engine for energy production, in line with the 2020 targets of European Union in terms of promotion of energy from renewable resources and greenhouse gas emission reduction. The tomato by-product utilization for energy production as a strategy to reduce the environmental load of tomato purée was evaluated by means of Life Cycle Assessment. Two scenarios were considered: Baseline Scenario — tomato by-products are sent back to the tomato fields as organic fertilizers; Alternative Scenario — tomato by-products are employed in a nearby biogas plant for energy production. Methane production of tomato by-products was assessed by means of specific laboratory tests. The comparison between the two scenarios highlighted reductions for all the impact categories with the Alternative Scenario. The most important reductions are related to particulate matter (− 5.3%), climate change (− 6.4%) and ozone depletion (− 13.4%). Although small, the reduction of the environmental impact cannot be neglected; for example for climate change, the anaerobic digestion of by-products allows a saving of GHG emissions that, over the whole year, is equal to 1.567 tons of CO 2 eq. The results of this study could be up-scaled to the food industries with high heat demand producing considerable amounts of fermentable by-products employable as feedstock for biogas production. [ABSTRACT FROM AUTHOR]

The use of renewable energies as alternative to fossil fuels has value from different points of view and has effects at environmental, social and economic level. These aspects are often connected to each other and together define the overall sustainability of bioenergy. At European level, the Directive 2009/28/EC gives the basic criteria for the estimation of sustainability of biofuels and indicates a minimum threshold of 35% of greenhouse gas saving for a biofuel in order to be considered sustainable. The Directive gives the possibility to identify standard regional values for the cultivation steps that could be utilized for the certification. This paper aims to give a contribution to the definition of these values considering the RED methodology applied to the sunflower cropped in central Italy which is characterized by a hilly landscape and not-irrigated crops. To determine input and output of sunflower cultivation in the central Italy, the results of PROBIO project, carried out by the Authors, were used. The sustainability of biodiesel produced from sunflower grown in central Italy is variable and depends on the nitrogen input and seasonal climatic conditions that affect the yields. The greenhouse gases savings of the Italian chain is 40% in average, greater than the required 35% and would be possible to assign this value as standard to the biofuel chain biodiesel from sunflower cultivated in central Italy. Using an averaged regional standard value guards against the possibility of considering unsustainable harvesting in unfavourable years and seeing it overestimated in the favourable ones. [ABSTRACT FROM AUTHOR]

The agricultural sector and its related production chains are good sources of residual biomass. Olive and vineyard pruning residues are present in high quantities in Italy. The limited bulk and energy densities of these biomass materials affect the harvesting and logistic costs, limiting energy and environmental sustainability. Pelletisation is the most efficient process for increasing bulk and energy densities. This study evaluates the pelletisation process of olive and vineyard prunings, pure, or blended with variable quantities of spruce sawdust. A 15 kW pelletisation system was chosen, in line with production at the farm level. The most important quality parameters of the produced agripellets were analyzed. The results of this investigation suggest that blending could valorize other biomass materials less suitable for pelletisation and reach the pellet quality required by Italian technical standards. The addition of pruning residues to spruce sawdust leads to an improvement in durability. Spruce sawdust pellets have a durability value of 78.4%. Adding 20% of olive prunings (S80O20) increases this value to 92.2, while adding 20% vineyard prunings (S80V20) increases this value up to 90.3. The addition of 20% of pruning residues significantly increased the length and decreased fines. [ABSTRACT FROM AUTHOR]

Phasing out fossil fuels to renewables is currently a global priority due to the climate change threat. Advocacy for biomass use as an energy source requires assessing the quality biomass and ecological impacts of bioenergy supply chains. This study evaluated the quality of biomass residues from orchards and silviculture transported from different Northern and Central Italy locations and the carbon footprint of a biomass power plant. The total greenhouse emissions were calculated based on primary data for 2017 according to the ISO/TS 14067. All the residue samples showed their suitability for biofuel use. Ash content was relatively low on average (3–5% d.m.), except for grapevine residues (18% d.m.). The lower heating value was within the expected range of 15–21 MJ kg−1 for plant species. The average GHG emission from the power plant was 17.4 g CO2 eq./MJ of electrical energy, with the energy conversion (38%) and transportation of biomass (34%) phases being the main impact contributors. For this study, impacts of residual agricultural residue were about half that of residues from forest management, mainly due to chipping and greater transport distance. Results show that sourcing residual biomass materials for electricity generation close to power plants significantly reduce GHG emissions compared to conventional fossil fuels. [ABSTRACT FROM AUTHOR]

Sunflower is one of the most important oilseed crops cultivated in the world for different purposes. In Italy, the production is mostly located in the central area, representing 70% of Italian production. The market demand for sunflower oil is higher than the national production. There is an increasing request for cold pressed sunflower oil for food application. The success of this activity is linked to a correct setting up and management of the production and supply chain with a valorization of products and by-products. To this aim, information is needed, and this paper is focused on the cultivation of sunflower in central Italy using suitable hybrids, as well as on the study of the cold extraction performance of the sunflower seed produced and the quality of by-products and residues. Results indicate that, on average, a range of about 1.0–1.5 t ha−1 of cold pressed oil and different amounts of by-products can be obtained. According to a proposed scenario, 30 ha cultivated with sunflower are needed to create a complete supply chain within the farm, avoiding many additional passages and maintaining all the value for the farmer. It is important to use suitable hybrids for obtaining good yield, but also the cold extraction performances are important because they also affect the quality of by-products and residues that can be valorized themselves to improve sustainability. [ABSTRACT FROM AUTHOR]