Search

Soluble salts are compounds found inside ornamental rocks and building stones exposed to atmospheric agents in environments rich in alkaline metal ions, such as sodium and potassium. The damage induced by their crystallization in those materials, used to build monuments and architectural structures of great importance, is an unsolved problem. Sodium sulfate is one of the most common and harmful salt found in these constructions. In this work, we studied the resistance through time to the wet-drying cycles of some natural stones (calcarenites, marbles, and sandstones) that have been utilized in the historical architecture in Italy. Samples were freshly cut and thermally aged to simulate increasing decay. Induced porosity in the thermally degraded samples was high in calcarenites, medium in marbles, and low in sandstones. Specimens subjected to artificial thermal aging lost a major percentage of mass compared to the non-weathered ones, when affected by the crystallization of soluble salts. With this study, we have observed that samples subjected to different wetting and drying cycles degrade faster due to the action of soluble salts, compared to samples that are not subjected to these cycles. [ABSTRACT FROM AUTHOR]

The quarrying of marble and its processing to produce building materials often generates a negative impact on the environment. In the Apuan Alps marble district, a renowned quarrying area in Italy since ancient times, the aquatic pollution of water bodies, caused by the presence of marble waste in the form of powder or sludge, represents a significant and current environmental problem. Depending on the different national and international regulations on waste management, the marble waste can be classified as a special non-hazardous industrial waste. If marble waste has been managed according to environmental international and national laws, it can be reused as a by-product. For this, the present work aims to evaluate the reuse of marble waste as a material in replacement for cement for producing mortars. Subsequently, the mechanical and physical tests were carried out to evaluate the specific properties of the obtained materials during and after the curing time. The results showed that replacement of cement into mortars by marble waste always causes a decrease of mechanical properties, with still acceptable values for many applications up to a substitution of less than 25%. From the collected data, the use of marble waste in the production of cement mortars represents an adequate and sustainable destination of this by-product. [ABSTRACT FROM AUTHOR]