Search

Grapevines are one of the most intensely treated crops with a high potential risk to health and biodiversity. Thus, the distribution control of agrochemicals is crucial to obtain a high quality and sustainable product for intensive viticulture. Although the search for systems to reduce the waste of chemical products is consistent in some countries, such as Italy, the machinery used are obsolete. The development of an upgrading system for sprayers can be a good compromise to achieve the pollution reduction without requiring huge investments. Field tests were conducted using a LIDAR-based prototype coupled to a commercial sprayer. This study tested the distribution performance using water-sensitive papers and evaluated the infections of grapevine downy and powdery mildews. The results showed a distribution in the vegetation gaps with a higher frequency in the coverage classes >20% in the standard treatment and 10–15% in the LIDAR treatment. Treatments performed with LiDAR reduced the incidence of downy mildew and severity of powdery mildew. The innovative sprayer reduces the distribution of agrochemicals thanks to the on/off control of the nozzles in the voids of vegetation and, meanwhile, controls vineyard fungal disease, so it can be a good way to meet the sustainability and quality of the production. [ABSTRACT FROM AUTHOR]

Phasing out fossil fuels to renewables is currently a global priority due to the climate change threat. Advocacy for biomass use as an energy source requires assessing the quality biomass and ecological impacts of bioenergy supply chains. This study evaluated the quality of biomass residues from orchards and silviculture transported from different Northern and Central Italy locations and the carbon footprint of a biomass power plant. The total greenhouse emissions were calculated based on primary data for 2017 according to the ISO/TS 14067. All the residue samples showed their suitability for biofuel use. Ash content was relatively low on average (3–5% d.m.), except for grapevine residues (18% d.m.). The lower heating value was within the expected range of 15–21 MJ kg−1 for plant species. The average GHG emission from the power plant was 17.4 g CO2 eq./MJ of electrical energy, with the energy conversion (38%) and transportation of biomass (34%) phases being the main impact contributors. For this study, impacts of residual agricultural residue were about half that of residues from forest management, mainly due to chipping and greater transport distance. Results show that sourcing residual biomass materials for electricity generation close to power plants significantly reduce GHG emissions compared to conventional fossil fuels. [ABSTRACT FROM AUTHOR]

Sunflower is one of the most important oilseed crops cultivated in the world for different purposes. In Italy, the production is mostly located in the central area, representing 70% of Italian production. The market demand for sunflower oil is higher than the national production. There is an increasing request for cold pressed sunflower oil for food application. The success of this activity is linked to a correct setting up and management of the production and supply chain with a valorization of products and by-products. To this aim, information is needed, and this paper is focused on the cultivation of sunflower in central Italy using suitable hybrids, as well as on the study of the cold extraction performance of the sunflower seed produced and the quality of by-products and residues. Results indicate that, on average, a range of about 1.0–1.5 t ha−1 of cold pressed oil and different amounts of by-products can be obtained. According to a proposed scenario, 30 ha cultivated with sunflower are needed to create a complete supply chain within the farm, avoiding many additional passages and maintaining all the value for the farmer. It is important to use suitable hybrids for obtaining good yield, but also the cold extraction performances are important because they also affect the quality of by-products and residues that can be valorized themselves to improve sustainability. [ABSTRACT FROM AUTHOR]