Search

The research work explores the impact of temperature on Silicon photovoltaic (PV) panels, considering Nigeria as a case study. It is found that high solar radiation in Nigeria increases the surface temperature of PV panels above 25 °C of the optimal operating temperature. The redundant energy gain from solar irradiance creates heat at the rear of solar panels and reduces their efficiency. Cooling mechanisms are therefore needed to increase efficiency. In this study, we demonstrated a unique hybrid system design employing a heat exchanger at the back of the panel, with water circulated through the back of the PV panel to cool the system. The system was simulated using TRNSYS at three locations in Nigeria—Maiduguri, Makurdi, and Port Harcourt. The results of the peak annual electrical power output in Maiduguri give a power yield of 1907 kWh/kWp, which is the highest, due to a high solar radiation average of 727 W/m2 across the year. For Makurdi, the peak annual electrical power output is 1542 kWh/kWp, while for Port Harcourt the peak power output is 1355 kWh/kWp. It was observed that the surface temperature of Polycrystalline Si-PV was decreased from 49.25 °C to 38.38 °C. The electrical power was increased from 1526.83 W to 1566.82 W in a day, and efficiency increased from 13.99% to 15.01%. [ABSTRACT FROM AUTHOR]

The use of hydrocarbon fuels increases with population growth and rising standards of living, and so does natural gas flaring. Natural gas flaring is both a waste of natural resources and a violation of Nigeria's energy policy for sustainable development through natural gas conservation. However, it remains the most cost-efficient and effective associated natural gas (ANG) management option in developing countries such as Nigeria. The World Bank's initiative to eliminate routine gas flaring by 2030 has increased the need to limit or eliminate routine gas flaring. Often, studies on natural gas utilisation techniques fail to consider the lack of practical tools that integrate economic, technical, and regulatory factors into a gas flaring management framework, and the intricacies of existing tools, which often come at the expense of simplicity to achieve real-time information output. This paper aims to establish a framework and ANG management tool to reduce regular gas flaring in Nigeria. This research established a management framework (using a flowchart decision tree) and models to provide a user-friendly ANG flaring tool (using a MATLAB graphical front end user interface with back-end ASPEN HYSYS thermodynamic models). This was combined with techno-economic models for liquefied natural gas, gas-to-methanol, and gas-to-wire ANG utilisation options. The tool was then tested with data obtained from Fields Y and X in the Niger Delta region of Nigeria. The results, considering both economic and technical factors, showed that the choice of liquefied natural gas for Field Y was best due to its proximity to the pipeline infrastructure and its cost-effectiveness, and the availability of a high-demand LNG market for that area. For Field X, gas-to-wire was best due to its proximity to the electrical grid and high electricity requirements for that area. Additional geographical profiles in West Africa and ANG utilisation alternatives were recommended for further investigation. This paper developed and validated a one-of-a-kind ANG flaring management tool that incorporates techno-economic analysis of selected ANG utilisation options to assist operators and investors in making more profitable investment decisions. [ABSTRACT FROM AUTHOR]