Search

In Italy, a large part of the buildings classified as historical–artistic heritage is in a state of degradation and requires urgent interventions. Among the needs, a reduction in the high energy consumption and an improvement of the indoor comfort are mandatory. The case study of the "Ex Institute of Zoology of Palermo" shows how it is possible to achieve a reduction in energy consumption and preserve the building's historicity through the estimation of energy loads and the subsequent processing. To quantify the energy savings of the structure, it was necessary to follow a few steps, namely an inspection of the building and an evaluation of its consumption. To elaborate a correct energy analysis, the thermal conductance was calculated by considering measurements over a period of 60 days and proceeding with the calculation of the transmittance. The resulting data are imported in the energy model developed with the TERMUS BIM software. In the case study, a potential energy saving equal to 35% of the current energy consumption can be avoided by replacing the lamps with LED ones, installing photovoltaic panels, replacing the heat pumps with a centralized system and the current fixtures with double thermal break fixtures. These interventions are implemented in compliance with the architectural peculiarities. [ABSTRACT FROM AUTHOR]

The necessity to improve the energy saving potential of buildings is now a duty. European and national policies are being implemented to address the important decisions being made on this subject. For these reasons, several studies focus on this relevant topic. This paper review not only focusses on it but studies it in-depth. A commercial 3D simulation software was used to design a building sited in Palermo estimating the thermal losses before and after external envelope insulation. In particular, all the thermal bridges (TBs) were analysed with the finite element method (FEM) and mitigated with rock wool insulation. The paper shows the linear thermal transmittance difference and heat flux loss before and after TB mitigation. The results confirm the importance of installing an external insulation layer in the old building envelope. The linear thermal transmittance of TBs and the associated heat flux loss often decrease by more than 50%. [ABSTRACT FROM AUTHOR]

The importance of renewable energy exploitation reduces the energy dependence on fossil fuels. Despite technological progress, in several remote areas and small islands the energy production is nowadays dominated by the utilization of fossil fuels. With new, increasingly stringent laws on polluting emissions and the need to lower production costs, it is necessary to exploit as many renewable sources as possible. In order to implement these considerations, it was decided to study renewable energy production. The study was carried out by estimating the energy production on a monthly and annual basis considering a mix of three plants, namely marine, solar, and wind. Simulations on wave production were carried out on a new device developed by the research team at the University of Palermo. In order to be able to perform these simulations, input climate data are required. These data are normally available in literature or obtainable by using specific GIS tools. As criterium, the Levelized Cost of Energy, normally applied to a single technology, is extended to the entire energy mix. Minimizing this parameter, the best solution is individuated, and capable of supplying 50% of the summer electrical load with renewable energy sources. The results carried out from a case study based in aeolian islands show that the solar production reaches 10.2%, the wind production reaches 45.47% and sea wave production reaches 3.04%. In this way, the diesel production decreases to 41.29%. This method can be easily applied for several small islands, estimating for several sites the ability to reduce the energy production from fossil fuels. [ABSTRACT FROM AUTHOR]