Search

The hydro-mining technology is considered as a promising method of bituminous coal excavation. The paper presents the results of the in-situ experimental campaign and modelling of hydro-cutting technology application. The proposed innovative technology was tested in terms of the effects of the distance between the outlet of water from the nozzle and a sidewall, pressure of the water jet, as well as the type of a nozzle on hydro-mining effectiveness. The hydro-cutting tests of coal seam performed in the Experimental Mine "Barbara" in Poland proved that the increase in water pressure in the range 20–40 MPa only slightly affects the coal face structure, while high pressure, of 80–100 MPa, has a significant impact on a coal face structure. The experimental results also showed the major effects of operating time as well as the distance of the water jet on the effectiveness of coal face mining. [ABSTRACT FROM AUTHOR]

The efforts of the world research activities involved in clean coal technologies development focus to a considerable extent on integrated hydrogen and power generation technologies based on coal gasification. As an alternative to combustion processes, gasification offers increased efficiency, lower negative environmental impact as well as wider application range of the main product—synthesis gas—in power generation and chemical syntheses. In order to select the most optimal lignite for the purpose of gasification, it is necessary to determine coal reactivity, the key parameter characterizing how fast the fuel reacts with the gasifying medium and controlling its process ability in thermochemical conversion to energy and/or energy carriers. This paper presents the experimental results of oxygen/steam gasification of lignite coal char in a fixed bed reactor under atmospheric pressure and at the temperature of 700, 800 and 900 °C; the samples come from an open pit lignite mine in the southwest of Poland. The effectiveness of the gasification process was tested in terms of the total gas and hydrogen yields, gas composition, carbon conversion rate and chars reactivity. [ABSTRACT FROM AUTHOR]

The main goal of the study was the analysis of the parameters of wastewater generated during the ex situ underground coal gasification (UCG) experiments on lignite from Belchatow, and hard coal from Ziemowit and Bobrek coal mines, simulated in the ex situ reactor. The UCG wastewater may pose a potential threat to the groundwater since it contains high concentrations of inorganic (i.e., ammonia nitrogen, nitrites, chlorides, free and bound cyanides, sulfates and trace elements: As, B, Cr, Zn, Al, Cd, Co, Mn, Cu, Mo, Ni, Pb, Hg, Se, Ti, Fe) and organic (i.e., phenolics, benzene and their alkyl derivatives, and polycyclic aromatic hydrocarbons) contaminants. The principal component analysis and hierarchical clustering analysis enabled to effectively explore the similarities and dissimilarities between the samples generated in lignite and hard coal oxygen gasification process in terms of the amounts and concentrations of particular components. The total amount of wastewater produced in lignite gasification process was higher than the amount generated in hard coal gasification experiments. The lignite gasification wastewater was also characterized by the highest contents of acenaphthene, phenanthrene, anthracene, fluoranthene, and pyrene, whereas hard coal gasification wastewater was characterized by relatively higher concentrations of nitrites, As, Cr, Cu, benzene, toluene, xylene, benzo( a)anthracene, chrysene, benzo( b)fluoranthene, benzo( k)fluoranthene, and benzo( a)pyrene. [ABSTRACT FROM AUTHOR]

Abstract: In the paper energy crops of considerable cultivation potential in Poland, namely: Salix viminalis, Helianthus tuberosus, Sida hermaphrodita, Spartina pectinata, Andropogon gerardi and Miscanthus X giganteus were tested in terms of steam gasification reactivity of biomass chars, as well as yields and composition of product gas in steam gasification and lime-enhanced steam gasification in a laboratory scale fixed bed reactor at 650 °, 700 ° and 800 °C. The highest value of reactivity for 50% of carbon conversion, R50, was observed for Sida hermaphrodita, regardless the process temperature. Application of CaO for in-situ CO2 capture in steam gasification of biomass chars resulted in hydrogen content increase at 650 °C to the levels comparable with the ones reached at 800 °C without carbonation reaction. Also hydrogen and total gas yields increased in tests of lime-enhanced gasification. [Copyright &y& Elsevier]

The objective of the study was the analysis of trace elements contents in coals of the Upper Silesian Coal Basin (USCB), which may pose a potential threat to the environment when emitted from coal processing systems. Productive carbon overburden in central and southern zones of the USCB is composed mostly of insulating tertiary formations of a thickness from a few m to 1,100 m, and is represented by Miocene and Pliocene formations. In the data study the geological conditions of the coal seams of particular zones of the USCB were taken into account and the hierarchical clustering analysis was applied, which enabled the exploration of the dissimilarities between coal samples of various zones of the USCB in terms of basic physical and chemical parameters and trace elements contents. Coals of the northern and eastern zones of the USCB are characterized by high average Hg and low average Ba, Cr, and Ni contents, whereas coals of southern and western zones are unique due to high average concentrations of Ba, Co, Cu, Ni, and V. Coals of the central part of the USCB are characterized by the highest average concentration of Mn and the lowest average concentrations of As, Cd, Pb, V, and Zn.