Search

Rod sources are a common tool for the calibration of whole-body counters in combination with the Saint-Petersburg brick phantom. Here, a method for the production of such sources in ordinary radiochemical laboratories is presented. The rod sources consist of a tubular capsule of rigid polyvinyl chloride with a radioactive filling of epoxy resin. The method allows the production of rod sources at material costs of about 1 € per rod source and of ten rod sources by one person per day. Quality-assurance measurements were performed regarding the spatial distribution of the activity within the rod sources and the distribution of the activity throughout a set of sources. The relative double standard deviation of the activities of five different segments of single rod sources was 7.1%. The relative double standard deviation within a set of 90 rod sources was 2.8% after those 11% of sources with the greatest deviation from the arithmetic mean were discarded. Tests according to ISO 2919 to certify the rod sources as sealed sources of Class 2 of this standard were successfully conducted. The bending test proved to be the most critical test for the rod sources; the sources were broken by a mass of 12-14 kg, which is only slightly more than the stipulated mass of 10.2 kg. The presented method allows for a cost- and labour-effective production of sealed radioactive rod sources and thus facilitates the application of the Saint-Petersburg brick phantom for calibrations and interlaboratory comparisons of whole-body counters., (© 2022. The Author(s).)

A computer code called Virtual Igor is presented. The code generates an analytical representation of the Saint Petersburg brick phantom family (Igor, Olga, Irina), which is frequently used for the calibration of whole-body counters, in arbitrary user-defined layouts for the use in the Monte-Carlo radiation transport code MCNP. The computer code reads a file in the ldraw format, which can easily be produced by simple freeware software with graphical user interfaces and which contains the types and coordinates of the bricks. Ldraw files with the canonical layouts of the brick phantom are provided with Virtual Igor. The code determines the positions of (2.75 cm) 3 segments of the bricks, where 2.75 cm is the smallest length in the layout and, therefore, represents the spacing of the segment lattice. Each segment contains the exact geometry of the respective part of the brick, using cuboid and cylindrical surfaces. The user can define which rod source drill holes of which bricks contain the rod-type radionuclide sources. The method facilitates the comparison of different layouts of the Saint Petersburg brick phantom with each other and with anthropomorphic computational phantoms., (© 2021. The Author(s).)