Search

Heliostat tracking is a critical component of the solar field of concentrating solar power tower (SPT) systems and can be the source of significant losses in power and profit when it lacks the necessary accuracy. This paper presents an advanced heliostat drive system for the SPT generation plant. An integrated model for the heliostat drive system based on dual axes tracking is proposed using an inexpensive angle sensor. The mathematical model of the integrated drive system is developed, including the solar, tower, and heliostat models. The matlab simulation model for the proposed integrated drive system is developed and evaluated. An experimental prototype for a dual-axis heliostat is built using Class-E direct current choppers and an inexpensive Gyro angle sensor. The prototype is tested and considered in the Dhahran region in Saudi Arabia under different operating conditions. A comparative study between simulation and experimental results is conducted to assess the efficacy and accuracy of the proposed controller drive system and validate the developed integrated model. Both simulation and experimental results demonstrate the effectiveness of the proposed dual-axis trackers to follow the sunbeams throughout the year. [ABSTRACT FROM AUTHOR]

A prototype of a solar power tower system was designed and constructed to produce electricity from solar energy. This prototype of a solar power tower system was constructed and installed at King Abdulaziz University in Saudi Arabia where solar intensity is excessive. Heliostats were implemented to capture the solar rays during daylight. These mirrors are used to direct the solar energy to a solar receiver that is made of alloy steel so that thermal energy is conveyed to a thermal fluid inside the receiver. Based on a detailed selection procedure presented in this article, a final number of ten heliostats were chosen to direct the solar energy to the solar receiver. In addition; two motors were used to control the heliostat rotational and elevation movements. The thermal fluid is a molten salt mixture (which consists of 60% NaNO 3 and 40% KNO 3 ). Cold and hot storage tanks were manufactured from steel and they were insulated with calcium silicate from all sides. A one-meter high and one and a half-meter cylindrical vessel was adopted for each of the cold and hot tanks. In this article, a detailed design analysis of each component is presented. The thermal power transferred to the water in the heat exchanger as it is heated by the molten salt was measured and found to be 11.26 kW. The thermal power given by the molten salt in the heat exchanger was also measured and found to be 12.31 kW. The design thermal power was 13 kW. The percentage error in the thermal power obtained is about 5.3%. [ABSTRACT FROM AUTHOR]

A prototype of a solar power tower system was designed and constructed to produce electricity from solar energy. This prototype of a solar power tower system was constructed and installed at King Abdulaziz University in Saudi Arabia where solar intensity is excessive. Heliostats were implemented to capture the solar rays during daylight. These mirrors are used to direct the solar energy to a solar receiver that is made of alloy steel so that thermal energy is conveyed to a thermal fluid inside the receiver. Based on a detailed selection procedure presented in this article, a final number of ten heliostats were chosen to direct the solar energy to the solar receiver. In addition; two motors were used to control the heliostat rotational and elevation movements. The thermal fluid is a molten salt mixture (which consists of 60% NaNO 3 and 40% KNO 3 ). Cold and hot storage tanks were manufactured from steel and they were insulated with calcium silicate from all sides. A one-meter high and one and a half-meter cylindrical vessel was adopted for each of the cold and hot tanks. In this article, a detailed design analysis of each component is presented. The thermal power transferred to the water in the heat exchanger as it is heated by the molten salt was measured and found to be 11.26 kW. The thermal power given by the molten salt in the heat exchanger was also measured and found to be 12.31 kW. The design thermal power was 13 kW. The percentage error in the thermal power obtained is about 5.3%. [ABSTRACT FROM AUTHOR]