Search

The South Jingyang tableland, located in Shaanxi Province, China, is composed of loess deposits. Agricultural irrigation in this area has caused the continuous rise of the groundwater table, which triggered a series of loess landslides. Although extensive research has been conducted on the effect of rising groundwater tables on induced loess landslides, less is known about the groundwater table distribution. This study jointly investigated the distribution of the groundwater table in the South Jingyang tableland using boreholes, electrical resistivity tomography (ERT), and laboratory tests. A qualitative analysis between the apparent resistivity and the water content was estimated at different depths, using the borehole data and ERT inversion data. A quantitative relationship between the resistivity and the water content was established in the laboratory tests. A combination of the qualitative analysis of the inversion results and the quantitative relationship was used to determine the distribution of the groundwater table. The groundwater table is present at the depth where the water content of the loess is 30% (liquid limit of loess) and the resistivity is 28.35 Ω m. The groundwater table elevation in the southern study area is higher than that of the northern study area and decreases in a stepwise gradient from south to north. This study not only identified the distribution of the groundwater table in the South Jingyang tableland, but also makes up for the limitation and inaccuracy in determining groundwater tables by relying solely on the borehole information or inversion results of ERT. The ascertained distribution characteristics of the groundwater table provides a basis for the analysis of the formation mechanism of landslides. [ABSTRACT FROM AUTHOR]

Agricultural irrigation of the South Jingyang tableland in Shaanxi Province, China has led to a continuous rise of the groundwater level and has triggered a series of loess landslides, thereby seriously affecting the life and property safety of local residents. Research shows that the major cause of the landslide in the loess layer of the South Jingyang tableland is the rising groundwater level. Therefore, the research on the formation mechanism of landslide in this area should include the investigation of the stratigraphic structure and groundwater level distribution characteristics. On this basis, a series of approaches, such as electrical resistivity tomography (ERT), borehole, and laboratory tests, was carried out on the South Jingyang tableland, and the groundwater level distribution and stratigraphic structure in the study area were determined. The qualitative relationship between resistivity value and water content at different depths was detected using the inversion results of ERT and borehole data. Through laboratory tests, the quantitative relationship between resistivity values under different water contents was established. The precise depth of the groundwater level was inferred by connecting the qualitative relationship with the quantitative relationship, and then a detailed 3D geological model was established by linking the inversion results of ERT with the field borehole lithology data and geological survey data. The detection results show that when the qualitative and quantitative analyses of the ERT inversion results were combined, the distribution of the groundwater level was accurately judged. The ERT is effective in reflecting the stratigraphic structure and hydrological characteristics of the Loess Plateau, and its potential as a supplementary technology for detecting the groundwater level is reasonable. This study addresses the limitation and inaccuracy in determining the stratum structure and groundwater level by solely relying on borehole information or ERT. The established 3D geological model not only provides a basis for the study of groundwater table fluctuation, but also a technical guidance for the stability evaluation of loess slope, landslide prediction, and early warning in the study area. [ABSTRACT FROM AUTHOR]