Search

It is very important to clarify the reservoir damage characteristics and damage characteristics and damage mechanism of tight sandstone gas reservoirs in Jinhua-Zhongtai mountain area of central SiChuan Basin, and put forward the technical countermeasures of "Double protection" drilling fluid to protect the reservoir and the environment, which is very important for the efficient well construction in this area. Through X-ray diffraction, scanning electron microscopy, casting thin sections and other testing methods, the mineral composition and microstructure characteristics of the block were analyzed, and the potential damage factors of the reservoir were clarified. Based on the sensitivity evaluation, it was revealed that the overall sensitivity damage of the block was weak. The main damage type was salt-sensitive damage, and the critical salinity was 9472.5 mg/L. On the basis of the environmental protection drilling fluid system used in this block, the surfactant which can effectively prevent gas invasion and reduce surface tension is selected, and the "Double protection" drilling fluid system is constructed. Through comprehensive performance test and reservoir protection performance evaluation, the core permeability damage rate of the optimized drilling fluid system is reduced from 88.77 to 18.66%, and the cuttings recovery rate is increased to more than 66%, and the cuttings expansion rate is reduced to less than 3.2%, which can effectively solve the problem of reservoir damage in drilling in Jinhua-Zhongtai mountain block in central Sichuan. [ABSTRACT FROM AUTHOR]

Shale gas is becoming a new energy development focus worldwide with advances in horizontal wells and hydraulic fracturing, and spontaneous water-based working fluid imbibition is one of the strongest phenomena that can impact borehole stability and the gas extraction rate. Our present experimental work was carried out on shale Brazilian discs with 5 different bedding orientations (0°, 30°, 45°, 60° and 90°) after air-drying and spontaneous water imbibition using a split Hopkinson pressure bar. The results illustrate that under the same loading rate (100–900 GPa/s), spontaneous water imbibition obviously weakens the dynamic tensile strength of shale discs, except for shale discs with a bedding orientation of 90° when the loading rate exceeds 400 GPa/s, and does not change the anisotropic dynamic tensile strength variation trend versus bedding orientations. Models that can well fit test data and reveal the coupling effects of bedding orientation and loading rate on the dynamic tensile strength of shale after air-drying and spontaneous water imbibition are proposed. The rate-dependent failure mode only appears among shale discs with bedding orientations of 30°, 45° and 60°, and this phenomenon is exacerbated and more complex after spontaneous water imbibition. Bedding planes of shale discs after air-drying and spontaneous water imbibition both play three different roles in affecting the failure crack propagation, i.e., intersecting propagation, promoting propagation and promoting turning. Finally, the dynamic tensile strength responses of shale after spontaneous water imbibition are analyzed and discussed, and potential field applications in borehole stability, perforation design and hydraulic fracturing are suggested. • Spontaneous water-based working fluid imbibition performs a promising influence on dynamic tensile behavior of shale. • Prediction models for dynamic tensile strength of shale before and after spontaneous water imbibition are established. • Dynamic tensile strength responses of shale after spontaneous water imbibition are discussed and explained. • Potential applications based on dynamic tensile behavior of shale after spontaneous water imbibition are proposed. [ABSTRACT FROM AUTHOR]