Search

We investigated the occurrence and removal of four benzotriazoles (BTs) (benzotriazole: BT; 5-methyl-benzotriazole: 5-TTri; 5-chloro-benzotriazole: CBT; 5,6-dimethyl-benzotriazole: XTri) and six UV filters (benzophenone-3: BP-3; 3-(4-methylbenzylidene)camphor: 4-MBC; octyl 4-methoxycinnamate: OMC; 2-(3-t-butyl-2-hydroxy-5-methylphenyl)-5-chloro benzotriazole: UV-326; 2-(2′-Hydroxy-5′-octylphenyl)-benzotriazole: UV-329; octocrylene: OC) in a full scale municipal wastewater treatment in South Australia. BT, 5-TTri and BP-3 were found as the dominant compounds detected in the wastewater samples with average concentrations up to 5706 ± 928 ng/L, 6758 ± 1438 ng/L and 2086 ± 1027 ng/L in influent, and up to 2439 ± 233 ng/L, 610 ± 237 ng/L and 153 ± 121 ng/L in effluent, respectively. In the biosolid, 4-MBC and OC were found with the highest concentrations of 962 ± 135 ng/g and 465 ± 65 ng/g, respectively. Sorption onto sludge played a dominant role in the removal for UV filters, especially for 4-MBC, UV-326 and OC, which accounted for 54%–92% of influent loads, while biological degradation played a significant role for the other compounds. [Copyright &y& Elsevier]

Abstract: A new method using gas chromatography–tandem mass spectrometry (GC–MS/MS) was developed for the determination of four benzotriazoles, i.e. benzotriazole (BT), 5-methylbenzotriazole (5-TTri), 5-chlorobenzotriazole (CBT), 5,6-dimethylbenzotriazole (XTri), and six UV filters, i.e. benzophenone-3 (BP-3), 3-(4-methylbenzylidene)camphor (4-MBC), octyl 4-methoxycinnamate (OMC), 2-(3-t-butyl-2-hydroxy-5-methylphenyl)-5-chloro benzotriazole (UV-326), 2-(2′-hydroxy-5′-octylphenyl)-benzotriazole (UV-329), and octocrylene (OC) in ground water, effluent and biosolid samples. Solid phase extraction (SPE) and pressurized liquid extraction (PLE) were applied as the preconcentration method for water samples (ground water and effluent) and biosolid samples, respectively. The optimized method allowed us to quantify all target compounds with the method detection limits ranging from 0.29 to 11.02ng/L, 0.5 to 14.1ng/L and 0.33 to 8.23ng/g in tap water, effluent and biosolid samples, respectively. The recoveries of the target analytes in tap water, effluent and biosolid samples were 70–150%, 82–127% and 81–133%, respectively. The developed analytical method was applied in the determination of these target compounds in ground water, effluent and biosolid samples collected from Bolivar sewage treatment plants in South Australia. In effluent samples, the target compounds BT, 5-TTri, CBT, XTri and BP-3 tested were detected with the maximum concentration up to 2.2μg/L for BT. In biosolid samples, eight out of ten compounds tested were found to be present at the concentrations ranging between 18.7ng/g (5-TTri) and 250ng/g (4-MBC). [Copyright &y& Elsevier]

We investigated the biodegradation of three selected benzotriazoles (BTs), namely benzotriazole (BT), 5-methyl-benzotriazole (5-TTri) and 5-chloro-benzotriazole (CBT), in aquifer materials. Biodegradation experiments were conducted in microcosms with fresh groundwater and aquifer sediment materials under aerobic and anaerobic (nitrate, sulfate, and Fe (III) reducing) conditions. All three BTs were degraded by microorganisms in aquifer materials under aerobic and anaerobic conditions. Under aerobic conditions, BT and 5-TTri were found to be degraded fastest with their half-lives of 43 days and 31 days, respectively, among the redox conditions used. Under anaerobic conditions, CBT was found to be degraded better with its half-life of 21 days under nitrate reducing conditions than under aerobic conditions with its half-life of 47 days. The two BT derivatives 5-TTri and CBT could be biotransformed into BT via demethylation and dechlorination reactions, respectively., (Copyright © 2013 Elsevier B.V. All rights reserved.)