Search

Highlights • One-step SPLE extraction method for PAHs, OCPs and PCBs in PM2.5 was developed. • Seventeen PAHs, 20 OCPs, and 63 PCBs showed a low LOQ and good recoveries. • Dozens of PAHs and several OCPs and PCBs were detected from ambient PM2.5 in Korea. • Newly developed method is cost-effective to analyze massive PM2.5 samples. Abstract Studies investigating toxic organic pollutants in fine dust (PM2.5), such as polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs), are insufficient, despite the pollutants' potent toxicity. The objective of this study is to develop an analytical method for determining PAHs, OCPs and PCBs in ambient PM2.5 using selective pressurized liquid extraction (SPLE). To maximize the extraction efficiency of target analytes, the extraction parameters of SPLE, particularly solvent type, temperature, static time, and cycle number, were optimized. The highest recoveries were observed under the conditions of dichloromethane:acetone (9:1), 100℃, 5 min of static time, and 1 cycle extraction, which is selected as the optimal method of SPLE. In the method validation, the results showed that the suggested method can quantify 17 PAHs, 20 OCPs, and 63 PCBs in PM2.5. Using urban dust SRM (1648a) and ambient PM2.5 samples, the applicability of the method was also confirmed. Total concentration of PAHs was the highest (2639.42–7377.75 pg/m3) followed by OCPs (80.57–674.69 pg/m3) and PCBs (1.39–9.34 pg/m3). Most of the PAHs were detected, whereas 2–7 compounds among 20 OCPs and 2–6 compounds among 63 PCBs were determined. The developed analytical method is highly efficient in terms of process (a one-step extraction process), time (15 min extraction time per one sample) and solvent usage (less than 30 mL per one sample), showing good performance. This method can be applied to investigate the organic toxicants in PM2.5, and it can contribute to monitoring and risk assessment, leading to an effective risk management policy for PM2.5 in Korea. [ABSTRACT FROM AUTHOR]

Simple Summary: This study proposed a methodology to simulate ecological damage in a toluene spill situation by coupling AQUATOX, an established ecological assessment model, and EFDC, a Lagrangian fluid diffusion model. TheAQUATOX-EFDC simulation showed a significant ecological impact, especially the greatest damage on the fish species group, the top predators. In this study, an ecological impact was assessed for the short-term leak scenario through the AQUATOX-EFDC model, which combines the proven ecological model AQUATOX with the hydrodynamic model EFDC. A case study of the coupled AQUATOX-EFDC model was conducted for 30–30,000 kg toluene leak scenarios in the Jeonju River in South Korea. A 21-day scenario simulation was conducted, and the impact of the toluene spill accident was evaluated by comparing the biomass between the control simulation and the perturbed simulation. As a result of the simulation, it was found that in the scenario in which 3000 kg of toluene was leaked for a day, a substantial change was expected in the range of 0–640 m from the accident site. Additionally, for a 30,000 kg leak, a substantial change was expected in the range of 0–2300 m from the accident site, and the greatest damage was observed for the fish species group, the top predators. As a result, the AQUATOX-EFDC simulation showed a significant ecological impact, and the proposed model will be helpful to understand the ecological impact and establish the management strategy for the ecological risk of the chemical spill. [ABSTRACT FROM AUTHOR]

A large quantity of volatile organic compounds (VOCs) can be released into water environments from oil spills and chemical exposure accidents. A recently developed solid ceramic dosimeter (SCD) could be used for long-term measuring of low VOCs concentrations in water. However, calibration and field testing of these SCDs have thus been far insufficient to apply for VOCs monitoring in a water environment in a chemical industrial area. We conducted laboratory calibration experiments and stability tests of the SCD. The mass accumulation of 14 target VOCs from 2 to 100 μg/L was increased linearly with time in the sampler. The absorption rate of the VOCs was related to Henry's law constant. The average diffusion coefficient of the 14 VOCs in the SCD wall was 1.02 × 10−9 m2/s. The SCD was utilized in a petrochemical plant complex in South Korea with an industrial wastewater reservoir. After a total of 7 days of deployment, chloroform, ethylbenzene, and toluene were detected by both passive sampling and grab sampling at the same VOC concentrations. [ABSTRACT FROM AUTHOR]