Search

Slope failures, subsidence, earthworks, consolidation of waste dumps, and erosion are typical active deformation processes that pose a significant hazard in current and abandoned mining areas, given their considerable potential to produce damage and affect the population at large. This work proves the potential of exploiting space-borne InSAR and airborne LiDAR techniques, combined with data inferred through a simple slope stability geotechnical model, to obtain and update inventory maps of active deformations in mining areas. The proposed approach is illustrated by analyzing the region of Sierra de Cartagena-La Union (Murcia), a mountainous mining area in southeast Spain. Firstly, we processed Sentinel-1 InSAR imagery acquired both in ascending and descending orbits covering the period from October 2016 to November 2021. The obtained ascending and descending deformation velocities were then separately post-processed to semi-automatically generate two active deformation areas (ADA) maps by using ADATool. Subsequently, the PS-InSAR LOS displacements of the ascending and descending tracks were decomposed into vertical and east-west components. Complementarily, open-access, and non-customized LiDAR point clouds were used to analyze surface changes and movements. Furthermore, a slope stability safety factor (SF) map was obtained over the study area adopting a simple infinite slope stability model. Finally, the InSAR-derived maps, the LiDAR-derived map, and the SF map were integrated to update a previously published landslides' inventory map and to perform a preliminary classification of the different active deformation areas with the support of optical images and a geological map. Complementarily, a level of activity index is defined to state the reliability of the detected ADA. A total of 28, 19, 5, and 12 ADAs were identified through ascending, descending, horizontal, and vertical InSAR datasets, respectively, and 58 ADAs from the LiDAR change detection map. The subsequent preliminary classification of the ADA enabled the identification of eight areas of consolidation of waste dumps, 11 zones in which earthworks were performed, three areas affected by erosion processes, 17 landslides, two mining subsidence zone, seven areas affected by compound processes, and 23 possible false positive ADAs. The results highlight the effectiveness of these two remote sensing techniques (i.e., InSAR and LiDAR) in conjunction with simple geotechnical models and with the support of orthophotos and geological information to update inventory maps of active deformation areas in mining zones. [ABSTRACT FROM AUTHOR]

Aragonés, L.; Tomás, R.; Cano, M.; Rosillo, E., and López, I., 2017. Influence of maritime construction within protected archaeological sites along coastal areas: Los Baños De La Reina (Alicante), Spain. A multidisciplinary study was made assessing the impact of the construction of a harbour on an existing Roman fish farm, which was excavated in the first century BC and placed in Alicante, on the SE coast of Spain. The effect of the harbour on the wave frequencies and the velocity of the streams has been modelled for the different building stages, using the SMC (Sistema de Modelado Costero) software, including consideration of the local maritime climate and bathymetry. The results show that the predominant wave frequencies and the stream velocities increased considerably after harbour construction and, as a result, created new turbulence areas within the influence area of the Roman fish farm. The presence of hydrodynamic bioindicators confirms this result. The lithological structure of the rock mass from which the pools were excavated clearly favours the differential erosion and the subsequent failure of the area, which is now exposed to the impact of ocean waves. The activity of some lithophaga organisms can also increase the degradation of the rock mass. Consequently, a joint analysis of the geological, biological, and maritime information available suggests the degradation of the Roman fish farm located in this area was strongly exacerbated by the construction of the harbour. [ABSTRACT FROM AUTHOR]

ABSTRACT It is widely known that differential land subsidence in a valley significantly controls its fluvial dynamics. Nevertheless, major uncertainty exists about the way in which alluvial forms respond to this process. In this study, morphological and lithostratigraphic data have been combined with advanced differential interferometry ( A-DInSAR) to detect changes in alluvial landform elevations and to verify the existence of a differential subsidence pattern influenced by active sedimentary dynamics. For this purpose, the middle reach of the Segura River valley (Vega Media of the Segura River), in southeast Spain, was chosen as the study area. The Vega Media of the Segura River is an alluvial area affected by subsidence processes in close conjunction with depositional conditions, ground-water withdrawals and faults. A high scale mapping of the main younger sedimentary units was carried out by combining multi-temporal aerial photographs, high-resolution digital elevation models derived from LIDAR data, global navigation satellite system data and fieldwork. In addition, lithostratigraphic descriptions were obtained from geotechnical drilling and trenching. Finally, ground surface displacements, measured using A-DInSAR for the periods 1995-2005 and 2004-2008, allowed the determination of elevation rates and ground deformation associated with the different alluvial units. The results from this analysis revealed four typical deformational behaviours: non-deformational units (cemented alluvial fans and upper fluvial terraces); slightly deformable units (lower terraces and old abandoned meanders); moderately deformable units (lateral accretion zones and abandoned meanders before channelisation in 1981); and highly deformable areas (recently active meanders associated with artificial cutoffs by channelisation, non-active floodplains and spilling zones). [ABSTRACT FROM AUTHOR]

Abstract: This paper presents an analysis of the performance of the Coherent Pixel Technique for urban subsidence monitoring using TerraSAR-X data. Repeated observations for the period comprised between July 2008 and September 2009 have been used. For this purpose the city of Murcia has been selected as a test-site because it is affected by subsidence due to groundwater exploitation. The obtained results are compared with those obtained from ERS/ENVISAT data belonging to the same period and validated with pre-existing information. Subsidence data reveal average rates of subsidence for the whole area up to −5mm/year with local values that reach −35mm/year. These results are analyzed with respect to the main factors that control subsidence mechanisms: the thickness of the compressible layer, the presence of pumping wells, and the water table variation. Finally a local analysis of several buildings and infrastructures is presented. Therefore the usefulness of X-band radar technology, not only to improve the knowledge of this kind of regional phenomenon, but also to study its effects on local areas such as buildings and infrastructures is demonstrated. [Copyright &y& Elsevier]

Abstract: Differential SAR Interferometry (DInSAR) is a remote sensing technique with the well-proven ability to monitor ground deformations. In this work we have applied an advanced DInSAR technique – the Coherent Pixels Technique (CPT) – , to study subsidence phenomena due to the excessive pumping of groundwater in the Vega Media of the Segura River (SE Spain) from 1993 to the present. The settlement map retrieved with DInSAR shows settlement of up to 8 cm at some points of the study area and has been compared with other data provided by ground instruments to analyse the relationship with ground deformation. A correlation has been observed between these measurements and the observations from on-site testing of piezometric groundwater fluctuations and borehole extensometric settlement. However, the distribution of damaged buildings, well points and basements does not show a clear relationship with measured subsidence values because the occurrence of damage also depends on the structural state of the buildings and the characteristics of their foundations. In addition, the distribution of pumping wells is not indicative of the distribution of the volume of water withdrawal which is the real conditioning factor of piezometric level changes. It can be concluded that the results obtained provide very useful spatial and temporal data about this phenomenon in an urban area at a low cost. The data can be used for forecasting purposes and helps to define zones with future ground settlement problems if the same conditions are repeated. This technique has also allowed the monitoring of ground subsidence in the Vega Media of Segura River for a period (1993–1995) where no instrument information was available. [Copyright &y& Elsevier]

The effect of exposure to high temperature on rock strength is a topic of interest in many engineering fields. In general, rock strength is known to decrease as temperature increases. The most common test used to evaluate the rock strength is the uniaxial compressive strength test (UCS). It can only be carried out in laboratory and presents some limitations in terms of the number, type and preparation of the samples. Such constrains are more evident in case of rocks from historical monuments affected by a fire, where the availability of samples is limited. There are alternatives for an indirect determination of UCS, such as the point load test (PLT), or non-destructive tests such as the Schmidt's hammer, that can also be performed in situ. The aims of this research are: (i) measuring the effect of high temperatures and cooling methods on the strength and hardness of a limestone named Pedra de Borriol widely used in several historic buildings on the E of Spain, and (ii) studying the possibility of indirectly obtaining UCS by means of PLT and Leeb hardness tests (LHT), using Equotip type D. Limestone samples were heated to 105 (standard conditions), 200, 300, 400, 500, 600, 700, 800 and 900 ºC and cooled slowly (in air) and quickly (immersed in water). After that, UCS, PLT and LHT tests were performed to evaluate the changes as temperature increases. Results show decreases over 90% in UCS, of between 50 and 70% in PLT index and smaller than 60% in LHT index. Insignificant differences between cooling methods were observed, although slowly cooled samples provide slightly higher values than quickly cooled ones. The results indicate that LHT can be used to indirectly estimate UCS, providing an acceptable prediction. Research on correlating strength parameters in rocks after thermally treated is still scarce. This research novelty provides correlations to predict UCS in historic buildings if affected by a fire, from PLT and non-destructive methods such as LHT whose determination is quicker and easier. [ABSTRACT FROM AUTHOR]

The study of land subsidence has recently been expanded due to its increased occurrence and magnitude worldwide. This paper develops and applies an optimal control model of groundwater extractions under conditions of land subsidence. We include, in a traditional groundwater management model, two types of negative externalities associated with land subsidence: damage to infrastructure and to economic activities, and the loss of aquifer storage capacity. Using a two-stage optimal control method, characterized by two sub-problems corresponding to the phase before and after the occurrence of subsidence, we find the economically sustainable paths of groundwater extractions and water table levels under the existence of land subsidence impacts. The theoretical results indicate that the presence of land subsidence dictates the optimal paths of groundwater withdrawals and water table levels. The model has been applied to the Alto Guadalentín over-exploited aquifer system in the Segura River Basin of Spain. The empirical outcomes indicate that by following the optimal paths, groundwater extractions should be curtailing to avoid reaching the critical water level at which subsidence takes place. Results suggest that regional net present value of welfare over the planning period, under the two land subsidence scenarios, is reduced by nearly 1–5%, compared to the no land subsidence scenario. Furthermore, under subsidence, even with relatively small impacts of both types of externalities, groundwater optimal extractions are kept at levels that avoid these externalities. These outcomes clearly call for government intervention in order to reduce groundwater withdrawals in aquifers with propensity to face undesirable subsidence effects. • LS due to aquifers overused causes major social costs with irreversible impacts. • LS has not received proper attention by regulators and the economic damages are not accurately assessed. • This paper develops a groundwater optimization model including negative externalities of LS. • In presence of subsidence, even with small impacts, groundwater management is necessary. • The results call for government intervention to curtail groundwater withdrawals to face LS. [ABSTRACT FROM AUTHOR]

A twenty-year period of severe land subsidence evolution in the Alto Guadalentín Basin (southeast Spain) is monitored using multi-sensor SAR images, processed by advanced differential interferometric synthetic aperture radar (DInSAR) techniques. The SAR images used in this study consist of four datasets acquired by ERS-1/2, ENVISAT, ALOS and COSMO-SkyMed satellites between 1992 and 2012. The integration of ground surface displacement maps retrieved for different time periods allows us to quantify up to 2.50 m of cumulated displacements that occurred between 1992 and 2012 in the Alto Guadalentín Basin. DInSAR results were locally compared with global positioning system (GPS) data available for two continuous stations located in the study area, demonstrating the high consistency of local vertical motion measurements between the two different surveying techniques. An average absolute error of 4.6 ± 4 mm for the ALOS data and of 4.8 ± 3.5 mm for the COSMO-SkyMed data confirmed the reliability of the analysis. The spatial analysis of DInSAR ground surface displacement reveals a direct correlation with the thickness of the compressible alluvial deposits. Detected ground subsidence in the past 20 years is most likely a consequence of a 100–200 m groundwater level drop that has persisted since the 1970s due to the overexploitation of the Alto Guadalentín aquifer system. The negative gradient of the pore pressure is responsible for the extremely slow consolidation of a very thick (> 100 m) layer of fine-grained silt and clay layers with low vertical hydraulic permeability (approximately 50 mm/h) wherein the maximum settlement has still not been reached. [ABSTRACT FROM AUTHOR]

Sediment budgets and morphological channel adjustments are closely related to changes in stream power. In ephemeral channels, whose geomorphic response depends on the magnitude and frequency of hydrological events isolated in time, such relationships are often difficult to establish. This study sought to quantitatively relate morphological adjustments to stream power along different reference channel reaches for the period 2018–2020 in the Azohía Rambla, a Mediterranean gravel-bed ephemeral stream in southeastern Spain. Very high resolution digital terrain models (VHR DTM) (at 1 to 2.5 cm pixel size), combined with ortophotographs and 3D point clouds, generated via SfM photogrammetry and terrestrial laser scanning (TLS) for pre- and post-event stages, together with ground-based surveys were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility and changes in net sediment flux during the study period in two spatial scenarios: reference channel reaches (RCRs) and pilot bed survey areas (PBSAs). The hydraulic variables (flow velocity, Froude number, shear stress, mean stream power and energy gradient, among other) were estimated using a 1D hydrodynamic model calibrated with field information. The high resolution maps allowed a spatially-explicit analysis of stream power and transport efficiency in accordance with the areas of erosion and deposition in each RCR. The incision and bed armoring processes showed different trends according to the stream power (ω), cumulative excess energy (ε c), and relative bed stability (RBS). The greatest morphological adjustments at the event scale coincided with ω values above 300 W m−2, ε c higher than 3 MJ, and RBS below 0.5. The relationships between the mean stream power gradient at peak flood discharges and the changes in bed elevation verified the bed aggradation (an average surface raising of 0.17 to 0.22 m for δω/δs of −6.2 to −14.5 W m−2 m−1) during the major flood and bed scour (average surface lowering of 0.16 to 0.19 m for δω/δs of 5.8 to 10.6 W m−2 m−1) in the moderated events at the bankfull and sub-bankfull stages. Furthermore, this study contributes new relevant data to the scarce existing literature on the relationships between stream power and morphosedimentary adjustments in a fluvial system highly sensitive and resilient to climate change, as is the case of ephemeral gravel-bed channels. [Display omitted] • Morphological channel adjustments are sensitive to changes in stream power. • Bed elevation was monitored at the event scale and very high spatial resolution. • Bedload controls sediment budgets in ephemeral gravel-bed streams. • Changes in bed stability related to stream power thresholds in ephemeral channels. [ABSTRACT FROM AUTHOR]

Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohía Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (ω), critical power (ωc), and energy gradients (∂ω/∂s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m3 s−1 according to channel reach), significant variations in ∂ω/∂s values and ω/ωc ratios (e.g., −15 < ∂ω/∂s < 15 Wm−3; ω/ωc > 2 for a peak discharge of 31 m3 s−1) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (≤10 m3 s−1) only produced minor changes resulting in surface washing, selective transport, and local bed scouring. [ABSTRACT FROM AUTHOR]