Search

This study provides the first ever published measurements of scour and morphological change around an Oscillating Water Column (OWC) Wave Energy Converter (WEC) device at a real-world site, with the intention of informing future designs to reduce costs of the technology. A 200-kW prototype OWC WEC was deployed at King Island, Tasmania, Australia in January 2021, providing a unique opportunity to monitor the device using a combination of dive footage, multi-beam surveys and bedrock surveys. Settlement of the device was observed and monitored before ceasing once the foundation made contact with the underlying bedrock at the site. It is hypothesized that the settlement is caused by scour undermining the gravity structure's foundations. The processes causing this scour are explored and possible future design modifications are suggested to reduce the risk of scour and settlement. [ABSTRACT FROM AUTHOR]

Wave measurements from a new, low-cost, real-time wave buoy (Spotter) are investigated in a comparative study as part of a site characterization study at a wave energy candidate site at King Island, Tasmania, Australia. Measurements from the Sofar Ocean Spotter buoy are compared with concurrent measurements from a Teledyne RD Instrument (RDI) 1200 kHz Work Horse ADCP and two RBRsolo3 D wave16 pressure loggers. The comparison period between 8 August and 12 October 2019 provides both the shallowest and longest continuous published comparison undertaken with the Spotter buoy. Strong agreement was evident between the Spotter buoy and RDI ADCP of key wave parameters including the significant wave height, peak wave period, and mean wave direction, with the mean values of those parameters across the full deployment period agreeing within 3%. Surface wave spectra and directional spectra are also analyzed with good agreement observed over the majority of the frequency domain, although the Spotter buoy records approximately 17% less energy within a narrow frequency band near the peak frequency when compared to the RDI ADCP. Measurements derived from the pressure loggers routinely underestimated the significant wave height and overestimated the mean wave period over the deployment period. The comparison highlights the suitability of the Spotter buoy for low-cost wave resource studies, with accurate measurements of key parameters and spectra observed. [ABSTRACT FROM AUTHOR]

• Scour patterns measured experimentally around a scaled Oscillating Water Column. • Scour shown to undermine the structure, comparable with the tunnel erosion effect. • Undermining scour leads to settlement of the gravity-based structure. • Increasing the corner curvature shown to reduce scour depths by 23%. • Comparison with field observations reveals similar scour patterns. Experimental measurements of wave scour are reported for a 1:20 scaled model of an operating 200 kW Oscillating Water Column (OWC) Wave Energy Converter (WEC) in King Island, Tasmania, Australia. Test cases include different wave conditions (Keulegan-Carpenter (KC) number range of 0.45-1.02) and multiple geometric changes to the device, which are compared to scour measurements taken in the field around the King Island OWC WEC device. The measurements therefore provide the first ever comparison of field data with a scaled laboratory model of scour around an OWC WEC. Results highlight that scour forms at the back corners of the device before undermining the structure with depths up to 64 mm (scour depth to structure width ratio, S / B , of 0.094), although the magnitude of this scour is shown to be reduced by 23% by curving the back corners. Scour at the front of the device is highly sensitive to the configuration of the front chamber door, with very different scour scenarios depending on whether the chamber door is open, closed, or removed entirely. Comparison with field data shows that undermining scour at the back of the device is reproduced in both settings, and this leads to settlement of the structure in both the laboratory and field. This suggests that the physical modelling forms an accurate representation of a real-world site, and therefore demonstrates scour processes with applicability to OWC WECs and other gravity-based bluff body structures such as caissons or gravity-based foundations. [ABSTRACT FROM AUTHOR]