Search

Reductions in the greenhouse gas (GHG) intensity of passenger and freight transportation are possible through adoption of fuel-saving technologies, demand switching between modes, and large-scale electrification of fleets, in addition to other actions. In this study, future scenarios to 2030 and 2050 are the basis for assessment of GHG reduction potentials for major passenger and freight modes (automobiles, buses, trains, aircraft, and oceangoing vessels) across eight regions of the world. New fuel-saving technologies can significantly reduce the life-cycle GHG footprint of both passenger and freight vehicles, but not uniformly worldwide. Countries outside of the Organization for Economic Cooperation and Development (OECD) lag behind OECD countries in GHG reduction potentials for all modes but oceangoing vessels owing to a combination of slower adoption of fuel-saving technologies and a slower decarbonization of electricity generation and other processes. The reduction of GHG intensity will occur more slowly for freight modes than for passenger modes. However, improved fuel efficiency has negative feedbacks to the effectiveness of mode-switching and alternative fuel adoption policies through 2050 because improvements in the fuel efficiency of vehicles alone may cause the marginal benefits of GHG abatement policies to diminish over time. This trend may be reversed if alternative fuel pathways decarbonize at faster rates than conventional transportation fuels. The largest opportunities for GHG reductions occur in non-OECD countries. Given the many factors that distinguish transportation systems between developed and developing nations (e.g., availability of new technologies, the financial ability to acquire them, and policies to incentivize their adoption), many benefits could be gained through interregional cooperation. [ABSTRACT FROM AUTHOR]

In the modern global economy, water and energy are fundamentally connected. Water already plays a major role in electricity generation and, with biofuels and electricity poised to gain a significant share of the transportation fuel market, water will become significantly more important for transportation energy as well. This research provides insight into the potential changes in water use resulting from increased biofuel or electricity production for transportation energy, as well as the greenhouse gas and freshwater implications. It is shown that when characterizing the water impact of transportation energy, incorporating indirect water use and defensible allocation techniques have a major impact on the final results, with anywhere between an 82% increase and a 250% decrease in the water footprint if evaporative losses from hydroelectric power are excluded. The greenhouse gas impact results indicate that placing cellulosic biorefineries in areas where water must be supplied using alternative means, such as desalination, wastewater recycling, or importation can increase the fuel's total greenhouse gas footprint by up to 47%. The results also show that the production of ethanol and petroleum fuels burden already overpumped aquifers, whereas electricity production is far less dependent on groundwater. [ABSTRACT FROM AUTHOR]

Abstract: A comparative life-cycle energy and emissions (greenhouse gas, CO, NOX, SO2, PM10, and VOCs) inventory is created for three U.S. metropolitan regions (San Francisco, Chicago, and New York City). The inventory captures both vehicle operation (direct fuel or electricity consumption) and non-operation components (e.g., vehicle manufacturing, roadway maintenance, infrastructure operation, and material production among others). While urban transportation inventories have been continually improved, little information exists identifying the particular characteristics of metropolitan passenger transportation and why one region may differ from the next. Using travel surveys and recently developed transportation life-cycle inventories, metropolitan inventories are constructed and compared. Automobiles dominate total regional performance accounting for 86–96% of energy consumption and emissions. Comparing system-wide averages, New York City shows the lowest end-use energy and greenhouse gas footprint compared to San Francisco and Chicago and is influenced by the larger share of transit ridership. While automobile fuel combustion is a large component of emissions, diesel rail, electric rail, and ferry service can also have strong contributions. Additionally, the inclusion of life-cycle processes necessary for any transportation mode results in significant increases (as large as 20 times that of vehicle operation) for the region. In particular, emissions of CO2 from cement production used in concrete throughout infrastructure, SO2 from electricity generation in non-operational components (vehicle manufacturing, electricity for infrastructure materials, and fuel refining), PM10 in fugitive dust releases in roadway construction, and VOCs from asphalt result in significant additional inventory. Private and public transportation are disaggregated as well as off-peak and peak travel times. Furthermore, emissions are joined with healthcare and greenhouse gas monetized externalities to evaluate the societal costs of passenger transportation in each region. Results are validated against existing studies. The dominating contribution of automobile end-use energy consumption and emissions is discussed and strategies for improving regional performance given private travel''s disproportionate share are identified. [Copyright &y& Elsevier]

Life-cycle air emission factors associated with road, rail, and air transportation of freight in the United States are analyzed. All life-cycle phases of vehicles, infrastructure, and fuels are accounted for in a hybrid life-cycle assessment (LCA). It includes not only fuel combustion, but also emissions from vehicle manufacturing, maintenance, and end of life, infrastructure construction, operation, maintenance, and end of life, and petroleum exploration, refining, and fuel distribution. Results indicate that total life- cycle emissions of freight transportation modes are underestimated if only tailpipe emissions are accounted for. In the case of CO2 and NOx, tailpipe emissions underestimate total emissions by up to 38%, depending on the mode. Total life-cycle emissions of CO and SO2 are up to seven times higher than tailpipe emissions. Sensitivity analysis considers the effects of vehicle type, geography, and mode efficiency on the final results. Policy implications of this analysis are also discussed. For example, while it is widely assumed that currently proposed regulations will result in substantial reductions in emissions, we find that this is true for NOx emissions, because fuel combustion is the main cause, and to a lesser extent for SO2, but not for PM10 emissions, which are significantly affected by the other life-cycle phases. [ABSTRACT FROM AUTHOR]

No other industry in the United States uses more materials by weight than the construction industry. Because of its economic strength and societal importance, it is also a significant polluter and a target of growing stakeholder scrutiny. This review offers an extended, supply chain inclusive framework for the study of the construction industry that serves all the life-cycle stages of society's infrastructure systems, and it summarizes selected literature on the life-cycle environmental assessment of construction materials, designs, and processes. On the basis of identified knowledge gaps, a research agenda is discussed for lesser-studied questions in order to first understand and then eventually reduce the environmental impacts of construction materials, processes, and activities. [ABSTRACT FROM AUTHOR]

Assesses the greenhouse gas emissions from building and operating electric power plants in the upper Colorado River Basin in the U.S. Amount of global warming effect (GWE) in a wind farm and a hydroelectric plant; Use of the life cycle assessment method; Measurement of GWE.

Evaluates the direct and indirect effects of the service industries on the economy and the environment in the United States using an Economic Input-Output Life Cycle Assessment model. Indirect consumption effects; Comparison of the economic output of the service industry with those of the manufacturing sector; Differences in terms of environmental emissions.

Estimates the major commodity and service inputs, resource requirements and environmental emissions and wastes for four major United States construction sectors. Reduction of construction's environmental effects to promote sustainable development; US Department of Commerce's definition of construction sectors; Sectors' use of resources and rates of environmental emissions and wastes .

Passenger cars in the United States (U.S.) rely primarily on petroleum-derived fuels and contribute the majority of U.S. transportation-related greenhouse gas (GHG) emissions. Electricity and biofuels are two promising alternatives for reducing both the carbon intensity of automotive transportation and U.S. reliance on imported oil. However, as standalone solutions, the biofuels option is limited by land availability and the electricity option is limited by market adoption rates and technical challenges. This paper explores potential GHG emissions reductions attainable in the United States through 2050 with a county-level scenario analysis that combines ambitious plug-in hybrid electric vehicle (PHEV) adoption rates with scale-up of cellulosic ethanol production. With PHEVs achieving a 58% share of the passenger car fleet by 2050, phasing out most corn ethanol and limiting cellulosic ethanol feedstocks to sustainably produced crop residues and dedicated crops, we project that the United States could supply the liquid fuels needed for the automobile fleet with an average blend of 80% ethanol (by volume) and 20% gasoline. If electricity for PHEV charging could be supplied by a combination of renewables and natural-gas combined-cycle power plants, the carbon intensity of automotive transport would be 79 g CO2e per vehicle-kilometer traveled, a 71% reduction relative to 2013. [ABSTRACT FROM AUTHOR]

The formation of effective policies to reduce emissions from goods movement should consider local and remote life cycle effects as well as barriers for mode shifting. Using uni- and multimodal freight movements by truck, rail, and ocean-going vessel (OGV) associated with California, a life cycle assessment (LCA) is developed to estimate the local and remote emissions that occur from freight activity inside and associated with the state. Long-run average per tonne-kilometer results show that OGVs emit the fewest emissions, followed by rail, then trucks, and that the inclusion of life cycle processes can increase impacts by up to 32% for energy and greenhouse gas (GHG) emissions and 4,200% for conventional air pollutants. Efforts to reduce emissions through mode shifting should recognize that infrastructure and market configurations may be inimical to mode substitution. A uni- and multimodal shipping emissions assessment is developed for intrastate and California-associated freight movements to illustrate the life cycle impacts of typical trips for certain types of goods. When targeting GHG reductions in California, it should be recognized that heavy-duty trucks are responsible for 99% of intrastate goods movement emissions. An assessment of future freight truck technology improvements is performed to estimate the effectiveness of strategies to meet 2050 GHG reduction goals. Whereas aggressive improvements in fuel economy coupled with alternative vehicles and fuels can significantly reduce GHG emissions, to meet 2050 goals will likely require zero carbon emission vehicle technology. The value of using LCA in GHG reduction policy for transportation systems is explored. [ABSTRACT FROM AUTHOR]

Abstract: Vehicular air pollutant emissions are characterized by a high degree of spatial variability that is correlated with the distribution of people. The consequences of the spatial association between emissions and exposed populations have not been fully captured in lifecycle and other impact assessments. The intake fraction (iF) quantifies aggregate air-pollutant exposures attributable to sources. Utilizing source–receptor (S–R) relationships derived from the US Environmental Protection Agency''s AERMOD steady-state plume model, we quantify the intake fraction of conserved pollutants emitted from on-road mobile sources and report here the first characterization across approximately 65,000 census tracts of the conterminous United States. Considering exposures out to 50 km from the source, the population-weighted mean iF is 8.6 parts per million (ppm). The population-weighted median generally increases with geographic scale, from 3.6 ppm for census tracts to 4.2 ppm for counties, and 5.1 ppm for states, while the population-weighted interquartile range (IQR) progressively narrows as geographic scale increases: 0.85–8.8 ppm for census tracts, 1.5–8.5 ppm for counties, and 3.2–7.5 ppm for states. Across the four US Census regions, the population weighted median iF varies from 2.2 ppm (South) to 7.5 ppm (West), and the census-tract IQR spans an order of magnitude in each region (2.1–17 ppm in the West; 0.55–6.9 ppm in the Midwest; 0.45–5.5 ppm in the South; and 1.8–18 ppm in the Northeast). The population-weighted mean intake fraction for populous urban counties is about two orders of magnitude greater than for sparsely populated rural counties. On a population-weighted average basis and considering the 50 km analysis range, 75% of the intake occurs in the same county as emissions. [Copyright &y& Elsevier]

Abstract: This paper develops the IMPACT North America model, a spatially resolved multimedia, multi-pathway, fate, exposure and effect model that includes indoor and urban compartments. IMPACT North America allows geographic differentiation of population exposure of toxic emissions for comparative risk assessment and life cycle impact assessment within U.S. and Canada. It looks at air, water, soil, sediment and vegetation media, and divides North America into several hundred zones. It is nested within a single world box to account for emissions leaving North America. It is a multi-scale model, covering three different spatial scales — indoor, urban and regional — in all zones in North America. Model results are evaluated against monitored emissions and concentrations of benzo(a)pyrene, 2,3,7,8-TCDD and mercury. Most of the chemical concentrations predicted by the model fall within two orders of magnitude of the monitored data. The model shows that urban intake fractions are one order of magnitude higher than rural intake fractions. The model application and importance is demonstrated by a case study on spatially-distributed emissions over the life cycle of diesel fuel. Depending on population densities and agricultural intensities, intake fractions can vary by eight orders of magnitudes, and even limited indoor emissions can lead to intakes comparable to those from outdoor emissions. To accurately assess these variations in intake fraction, we require the essential three original features described in the present paper: i) inclusion of the continental model within a world box for persistent pollutants, ii) addition of an urban box for short- and medium-lived substances (for grid size larger than 100 km), and iii) assess indoor emissions. This model can therefore be used to screen chemicals and assess regionalized intake fractions within North America for population-based human exposure assessment, life cycle impact assessment, and comparative risk assessment. The model can be downloaded at http://www.impactmodeling.org. [Copyright &y& Elsevier]