Search

This paper reconsiders the outpacing argument, the belief that changes in law and other means of regulation cannot keep pace with recent changes in technology. We focus on information and communication technologies (ICTs) in and of themselves as well as applied in computer science, telecommunications, health, finance, and other applications, but our argument applies also in rapidly developing technological fields such as environmental science, materials science, and genetic engineering. First, we discuss why the outpacing argument is so closely associated with information and computing technologies. We then outline 12 arguments that support the outpacing argument, by pointing to some particular weaknesses of policy making, using the United States as the primary example. Then arguing in the opposite direction, we present 4 brief and 3 more extended criticisms of the outpacing thesis. The paper's final section responds to calls within the technical community for greater engagement of policy and ethical concerns and reviews the paper's major arguments. While the paper focuses on ICTs and policy making in the United States, our critique of the outpacing argument and our exploration of its complex character are of utility to actors in other political contexts and in other technical fields. [ABSTRACT FROM AUTHOR]

Gallium nitride (GaN) has a wide energy band gap and a high power density, efficiency, switching frequency, and electron carrier mobility, having broad applications in digitization. Because GaN has high potentials, this study performed a bibliometric analysis on the publications of GaN indexed in the Web of Science database from 1970 to 2023. A performance analysis of the 15,634 publications was performed using Harzing's Publish or Perish tool, while science mappings were performed with VOSviewer software. The results show that there has been an uptrend in the on-going research on GaN, especially in the past decade. Most of the documents are within the fields of physics, engineering, and materials science. The United States has the highest number of publications and the most impactful research. The United States is also actively collaborating with other countries to gain deeper insights into GaN. The analysis shows that the concentration of GaN research is slowly moving towards the development of high-voltage operations. [ABSTRACT FROM AUTHOR]

Over the past few years, research carried out at large-scale materials science facilities in the USA and elsewhere has undergone a phase transition that affected its character and culture. Research cultures at these facilities now resemble ecosystems, comprising of complex and evolving interactions between individuals, institutions, and the overall research environment. The outcome of this phase transition, which has been gradual and building since the 1980s, is known as the New (or Ecologic) Big Science [Crease, R. and Westfall, C. (2016). The new big science. Physics Today , 69: 30–6]. In this article, we describe this phase transition, review the practical challenges that it poses for historians, review some potential digital tools that might respond to these challenges, and then assess the theoretical implications posed by "database history'. [ABSTRACT FROM AUTHOR]

Background: Exposure to fine particulate matter pollution (PM2.5) is hazardous to health. Our aim was to directly estimate the health and longevity impacts of current PM2.5 concentrations and the benefits of reductions from 1999 to 2015, nationally and at county level, for the entire contemporary population of the contiguous United States.Methods and Findings: We used vital registration and population data with information on sex, age, cause of death, and county of residence. We used four Bayesian spatiotemporal models, with different adjustments for other determinants of mortality, to directly estimate mortality and life expectancy loss due to current PM2.5 pollution and the benefits of reductions since 1999, nationally and by county. The covariates included in the adjusted models were per capita income; percentage of population whose family income is below the poverty threshold, who are of Black or African American race, who have graduated from high school, who live in urban areas, and who are unemployed; cumulative smoking; and mean temperature and relative humidity. In the main model, which adjusted for these covariates and for unobserved county characteristics through the use of county-specific random intercepts, PM2.5 pollution in excess of the lowest observed concentration (2.8 μg/m3) was responsible for an estimated 15,612 deaths (95% credible interval 13,248-17,945) in females and 14,757 deaths (12,617-16,919) in males. These deaths would lower national life expectancy by an estimated 0.15 years (0.13-0.17) for women and 0.13 years (0.11-0.15) for men. The life expectancy loss due to PM2.5 was largest around Los Angeles and in some southern states such as Arkansas, Oklahoma, and Alabama. At any PM2.5 concentration, life expectancy loss was, on average, larger in counties with lower income and higher poverty rate than in wealthier counties. Reductions in PM2.5 since 1999 have lowered mortality in all but 14 counties where PM2.5 increased slightly. The main limitation of our study, similar to other observational studies, is that it is not guaranteed for the observed associations to be causal. We did not have annual county-level data on other important determinants of mortality, such as healthcare access and quality and diet, but these factors were adjusted for with use of county-specific random intercepts.Conclusions: According to our estimates, recent reductions in particulate matter pollution in the USA have resulted in public health benefits. Nonetheless, we estimate that current concentrations are associated with mortality impacts and loss of life expectancy, with larger impacts in counties with lower income and higher poverty rate. [ABSTRACT FROM AUTHOR]

Prostate cancer was the most common form and had the second highest death rate of male cancer in the United States in 2015. Current diagnosis techniques, such as prostate-specific antigen tests, transrectal ultrasound scans, and biopsies, are often inconclusive, and in the latter case, invasive. Here, we explore the use of clofazimine hydrochloride nanoparticles (CFZ-HCl NPs), a repurposed formulation from an FDA-approved antimycobacterial agent, as a photoacoustic contrast agent for the evaluation of prostate cancer due to its macrophage-targeting capabilities and high optical absorbance at 495 nm. Using a transgenic adenocarcinoma of the mouse prostate (TRAMP) mouse model, our results indicate a preferential accumulation of intravenously injected CFZ-HCl NPs in cancerous prostates over normal prostates. Differences in accumulation of CFZ-HCl NPs between cancerous and normal prostates were determined using a two-wavelength unmixing technique via ex vivo photoacoustic imaging. Thus, intravenous injection of CFZ-HCl NPs leads to differences in the interactions of the particles with cancerous vs normal prostates, while allowing for photoacoustic detection and analysis of prostate cancer. These findings could lead to the development of a new noninvasive technique for the detection and monitoring of prostate cancer progression in an animal model that can potentially be translated to human patients. [ABSTRACT FROM AUTHOR]

Objective: To investigate the accuracy and precision of ultrasound shear wave elasticity measurements as a function of target elasticity and acquisition depth. Materials and methods: Using five ultrasound systems (VTQ, VTIQ, EPIQ 5, Aixplorer, and Aplio 500), two operators independently measured shear wave elasticities in two phantoms containing five different target elasticities (8±3, 14±4, 25±6, 45±8, and 80±12 kPa) at depths of 15, 30, 35, and 60 mm. Accuracy was assessed by evaluating measurement errors and the proportions of outliers, while factors affecting accuracy were assessed using logistic regression analysis. Measurement errors were defined as differences between the measured values and 1) the margins of the target elasticity, and 2) the median values of the target elasticity. Outliers were defined as measured values outside the margins of the target elasticity. Precision was assessed by calculating the reproducibility of measurements using the within-subject coefficient of variation (wCV). Results: Mean measurement errors and the proportions of outliers were higher for high than for low target elasticities (p<0.001), but did not differ in relation to acquisition depth, either within an elastography system or across the different systems. Logistic regression analysis showed that target elasticity (p<0.001) significantly affected accuracy, whereas acquisition depth (p>0.05) did not. The wCV for the 80±12 kPa target (31.33%) was significantly higher than that for lower elasticity targets (6.96–10.43 kPa; p<0.001). The wCV did not differ across acquisition depths. The individual elastography systems showed consistent results. Conclusions: Targets with high elasticity showed lower accuracy and lower precision than targets with low elasticity, while acquisition depth did not show consistent patterns in either accuracy or precision. [ABSTRACT FROM AUTHOR]

Virtual three-dimensional (3D) surface models of autopsied human brain hemispheres were constructed by integrating multiple two-dimensional (2D) photographs. To avoid gravity-dependent deformity, formalin-fixed hemispheres were placed on non-refractile, transparent acrylic plates, which allowed us to take 2D photographs from various different angles. Photogrammetric calculations using software (ReCap Pro cloud service, Autodesk, San Rafael, CA, USA) allowed us calculate the 3D surface of each brain hemisphere. Virtual brain models could be moved and rotated freely to allow smooth, seamless views from different angles and different magnifications. When viewing rotating 3D models on 2D screens, 3D aspects of the models were enhanced using motion parallax. Comparison of different brains using this method allowed us to identify disease-specific patterns of macroscopic atrophy, that were not apparent in conventional 2D photographs. For example, we observed frontal lobe atrophy in a progressive supranuclear palsy brain, and even more subtle atrophy in the superior temporal gyrus in amyotrophic lateral sclerosis-frontotemporal lobar degeneration. Thus, our method facilities recognition of gyral atrophy. In addition, it provides a much more powerful and suitable way of visualizing the overall appearance of the brain as a three-dimensional structure. Comparison of normal and diseased brains will allow us to associate different macroscopic changes in the brain to clinical manifestations of various diseases. [ABSTRACT FROM AUTHOR]

Fresh produce outbreaks due to Shiga toxin-producing Escherichia coli (STEC) continue to occur in the United States (US). Manure-amended soils can pose a public health risk when used for growing raw agricultural commodities. Knowing the prevalence and concentration of STEC in untreated biological soil amendments of animal origin (BSAAO) is important to help guide the most appropriate pre-harvest interval(s) following application to limit risks from these soil amendments. Bovine manure samples were collected from 12 farms in Florida, including samples from piles, lagoons, barns, and screened solids. Two methods were used to detect stx1/2 and rfbE genes in samples. A prevalence rate of 9% for stx1 and/or stx2 and 19% for rfbE was observed from the 518 bovine manure samples evaluated. A most probable number (MPN) assay was performed on stx+ samples when applicable. The geometric mean for stx+ samples (n = 20) was 3.37 MPN g-1 (0.53 log MPN g-1) with a maximum value of 6,800 MPN g-1 (3.83 log MPN g-1). This research was part of a larger nationwide geographical study on the prevalence and concentration of STEC in bovine manure to help guide regulations on feasible pre-harvest intervals for the application of untreated BSAAO. [ABSTRACT FROM AUTHOR]

Purpose: To investigate whether hyperreflective foci (HRF) exhibit flow projection artifact on OCTA, and study the efficacy of commercial projection artifact removal software (PAR-OCTA, Optovue, Inc), and a custom projection resolved OCTA (PR-OCTA) in distinguishing artifacts from true flow in retinal angiomatous proliferation (RAP). Methods: The study included five eyes with HRF representing pigment migration in dry age-related macular degeneration (AMD), five eyes with leaking treatment-naïve RAP, and ten eyes with diabetic hard exudates. We examined flow signal on OCTA cross-sections using PAR, and performed PR-OCTA to study the effect of increasingly stringent projection removal thresholds. Flow signal intensity was analyzed and quantified using imageJ (NIH, Bethesda, MD, USA), by calculating the percentage of red pixels (R) representing flow, compared to green (G) and blue (B) pixels. Results: PAR-OCTA cross sections revealed persistent flow signal in all HRF, including RAP, hard exudates and pigment migration. In RAP, PR-OCTA detected intransigent flow, irrespective of the flow removal threshold. Mean R in the five RAP lesions remained higher than mean G and B at the most stringent PR-OCTA threshold (40.96% vs 29.52 and 29.52%, respectively), denoting persistence of flow. In contrast, increasing the PR-OCTA threshold in pigment migration and hard exudates removed the flow signal, with a statistically significant decrease in mean R with increasing threshold. (p = 0.017 and 0.0029, respectively) Conclusion: Commercial PAR-OCTA is not completely effective at removing artifactual flow in hard exudates and HRF related to pigment migration. Custom built PR-OCTA, using a sliding scale of threshold, allowed us to distinguish true flow in RAP from artifactual flow in avascular HRF. Further studies are needed to validate the optimum threshold for projection artifact removal, which would preserve true flow in RAP and the small intraretinal capillaries. [ABSTRACT FROM AUTHOR]

Abstract Applied nuclear physics is an essential part of the research activity at many particle accelerators. New, large accelerator facilities are currently under construction in Europe, Asia, and USA. These machines will be able to produce radioactive ion beams, and to increase the intensity and the energy of the heavy ions well beyond the limits currently available at the therapy or research facilities. The upcoming facilities open new opportunities for research in biomedical applications that require these special properties, such as particle radiography, radioactive beam imaging, ultra-high dose rates and new ions for therapy. Moreover, space radiation research and materials science can successfully exploit these new centers. The new facilities can pave the way to many future applications of nuclear physics for the benefit of the society. In this paper we will summarize the current status of applied sciences at high-energy accelerators, describe the characteristics of some of the machines under construction (FAIR, NICA, RAON, ELI) and discuss the new opportunities offered by these facilities in applied sciences. [ABSTRACT FROM AUTHOR]

In the western United States, the long-term recovery of many Pacific salmon populations is inextricably linked to freshwater habitat quality. Industrial activities from the past century have left a legacy of pollutants that persist, particularly near working waterfronts. The adverse impacts of these contaminants on salmon health have been studied for decades, but the population-scale consequences of chemical exposure for salmonids are still poorly understood. We estimated acute and delayed mortality rates for seaward migrating juvenile Chinook salmon that feed and grow in a Superfund-designated area in the Lower Willamette River in Portland, Oregon. We combined previous, field-collected exposure data for juvenile Chinook salmon together with reduced growth and disease resistance data from earlier field and laboratory studies. Estimates of mortality were then incorporated into a life cycle model to explore chemical habitat-related fish loss. We found that 54% improved juvenile survival—potentially as a result of future remediation activities—could increase adult Chinook salmon population abundance by more than 20%. This study provides a framework for evaluating pollution remediation as a positive driver for species recovery. [ABSTRACT FROM AUTHOR]

Many countries have passed environmental laws aiming at preserving natural ecosystems, such as the Endangered Species Act of 1973 in the United States. Although those regulations seem to have improved preservation, they may have had unintended consequences in energy production. Here we show that while environmental constraints on hydropower may have preserved the wilderness and wildlife by restricting the development of hydroelectric projects, they led to more greenhouse gas emissions. Environmental regulations gave rise to a replacement of hydropower, which is a renewable, relatively low-emitting source of energy, with conventional fossil-fuel power, which is highly polluting. Our estimates indicate that, on average, each megawatt of fossil fuel power-generating capacity added to the grid because of environmental constraints on hydropower development led to an increase in annual carbon dioxide emissions of about 1,400 tons. Environmental regulations focusing only on the preservation of ecosystems appear to have encouraged electric utilities to substitute dirtier fuels for hydropower in electricity generation. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to clarify whether serum matrix metalloproteinase 3 (MMP-3) levels are associated with an effect of iguratimod as add-on therapy to biological DMARDs (bDMARDs) in patients with rheumatoid arthritis (RA). Methods: Forty three patients with RA were treated with iguratimod as add-on therapy to bDMARDs. They were classified into remission and non-remission groups at 24 weeks of iguratimod therapy. Remission was defined as a state with a disease activity score (DAS) <2.6 in 28 joints (termed DAS remission) and total power Doppler ultrasound (US) score <3 (termed US remission). The serum MMP-3 levels at baseline and at 12 weeks were compared between these two groups. Results: There were no significant differences in the serum MMP-3 levels at baseline between the DAS and US remission groups and the non-remission group. The serum MMP-3 levels at 12 weeks in the US remission group were significantly lower than those in the non-remission group. The ratios of the serum MMP-3 levels at baseline to those at 12 weeks in both the DAS and US remission groups were significantly lower than those in the non-remission group. An MMP-3 ratio <0.86 was determined as the cut-off value to predict US remission at 24 weeks. Conclusion: Our findings suggest that the ratios of the serum MMP-3 levels at baseline to those at 12 weeks could be used to predict remission in RA patients who are administered iguratimod as an add-on to bDMARDs. [ABSTRACT FROM AUTHOR]

Accurate demand forecasting for new technology products is a key factor in the success of a business. We propose a way to forecasting a new product’s diffusion through technology diffusion and interest diffusion. Technology diffusion and interest diffusion are measured by the volume of patent citations and web search traffic, respectively. We apply the proposed method to forecast the sales of hybrid cars and industrial robots in the US market. The results show that that technology diffusion, as represented by patent citations, can explain long-term sales for hybrid cars and industrial robots. On the other hand, interest diffusion, as represented by web search traffic, can help to improve the predictability of market sales of hybrid cars in the short-term. However, interest diffusion is difficult to explain the sales of industrial robots due to the different market characteristics. Finding indicates our proposed model can relatively well explain the diffusion of consumer goods. [ABSTRACT FROM AUTHOR]

Roadway elevation data is critical for a variety of transportation analyses. However, it has been challenging to obtain such data and most roadway GIS databases do not have them. This paper intends to address this need by proposing a method to extract roadway elevation data from Google Earth (GE) for transportation applications. A comprehensive accuracy assessment of the GE-extracted elevation data is conducted for the area of conterminous USA. The GE elevation data was compared with the ground truth data from nationwide GPS benchmarks and roadway monuments from six states in the conterminous USA. This study also compares the GE elevation data with the elevation raster data from the U.S. Geological Survey National Elevation Dataset (USGS NED), which is a widely used data source for extracting roadway elevation. Mean absolute error (MAE) and root mean squared error (RMSE) are used to assess the accuracy and the test results show MAE, RMSE and standard deviation of GE roadway elevation error are 1.32 meters, 2.27 meters and 2.27 meters, respectively. Finally, the proposed extraction method was implemented and validated for the following three scenarios: (1) extracting roadway elevation differentiating by directions, (2) multi-layered roadway recognition in freeway segment and (3) slope segmentation and grade calculation in freeway segment. The methodology validation results indicate that the proposed extraction method can locate the extracting route accurately, recognize multi-layered roadway section, and segment the extracted route by grade automatically. Overall, it is found that the high accuracy elevation data available from GE provide a reliable data source for various transportation applications. [ABSTRACT FROM AUTHOR]

Background: Despite known health disparities for sexual minorities, few studies have described sexual function by sexual orientation using a robust approach to measurement of sexual function. We compared recent sexual function and satisfaction by sexual orientation among English-speaking US adults. Methods and findings: Cross-sectional surveys were administered by KnowledgePanel® (GfK), an online panel that uses address-based probability sampling and is representative of the civilian, noninstitutionalized US population. Data were collected in 2013 from the general population (n = 3314, 35% response rate) and in 2014 from self-identified lesbian, gay, and bisexual adults (n = 1011, 50% response rate). Sexual function and satisfaction were measured using the Patient-Reported Outcomes Measurement Information System® Sexual Function and Satisfaction measure version 2.0 (PROMIS SexFS v2). The PROMIS SexFS v2 is a comprehensive, customizable measurement system with evidence for validity in diverse populations. A score of 50 (SD 10) on each domain corresponds to the average for US adults sexually active in the past 30 days. We adjusted all statistics for the complex sample designs and report differences within each sex where the 95% CIs do not overlap, corresponding to p<0.01. Among US men who reported any sexual activity in the past 30 days, there were no differences in erectile function or orgasm-ability. Compared to heterosexual men, sexual minority men reported higher oral dryness and lower orgasm-pleasure and satisfaction. Compared to heterosexual men, gay men reported lower interest, higher anal discomfort and higher oral discomfort. Among sexually active women, there were no differences in the domains of vulvar discomfort-clitoral, orgasm-pleasure, or satisfaction. Compared to heterosexual women, sexual minority women reported higher oral dryness. Lesbian women reported lower vaginal discomfort than other women; lesbian women reported higher lubrication and orgasm-ability than heterosexual women. Bisexual women reported higher interest, higher vulvar discomfort-labial and higher anal discomfort than other women, as well as higher oral discomfort compared to heterosexual women. Conclusions: Recent sexual function and satisfaction differed by sexual orientation among US adults. Sexual minority men and women had decrements in domains of sexual function that have not traditionally been included in multi-dimensional self-report measures. Clinicians should make themselves aware of their patients’ sexual concerns and recognize that sexual minority patients may be more vulnerable to certain sexual difficulties than heterosexual patients. [ABSTRACT FROM AUTHOR]

Background: Paper currency by its very nature is frequently transferred from one person to another and represents an important medium for human contact with—and potential exchange of—microbes. In this pilot study, we swabbed circulating $1 bills obtained from a New York City bank in February (Winter) and June (Summer) 2013 and used shotgun metagenomic sequencing to profile the communities found on their surface. Using basic culture conditions, we also tested whether viable microbes could be recovered from bills. Results: Shotgun metagenomics identified eukaryotes as the most abundant sequences on money, followed by bacteria, viruses and archaea. Eukaryotic assemblages were dominated by human, other metazoan and fungal taxa. The currency investigated harbored a diverse microbial population that was dominated by human skin and oral commensals, including Propionibacterium acnes, Staphylococcus epidermidis and Micrococcus luteus. Other taxa detected not associated with humans included Lactococcus lactis and Streptococcus thermophilus, microbes typically associated with dairy production and fermentation. Culturing results indicated that viable microbes can be isolated from paper currency. Conclusions: We conducted the first metagenomic characterization of the surface of paper money in the United States, establishing a baseline for microbes found on $1 bills circulating in New York City. Our results suggest that money amalgamates DNA from sources inhabiting the human microbiome, food, and other environmental inputs, some of which can be recovered as viable organisms. These monetary communities may be maintained through contact with human skin, and DNA obtained from money may provide a record of human behavior and health. Understanding these microbial profiles is especially relevant to public health as money could potentially mediate interpersonal transfer of microbes. [ABSTRACT FROM AUTHOR]

Background: U.S. natural gas production increased 40% from 2000 to 2015. This growth is largely related to technological advances in horizontal drilling and high-volume hydraulic fracturing. Environmental exposures upon impacted communities are a significant public health concern. Noise associated with natural gas compressor stations has been identified as a major concern for nearby residents, though limited studies exist. Objectives: We conducted a pilot study to characterize noise levels in 11 homes located in Doddridge County, West Virginia, and determined whether these levels differed based on time of day, indoors vs. outdoors, and proximity of homes to natural gas compressor stations. We also compared noise levels at increasing distances from compressor stations to available noise guidelines, and evaluated low frequency noise presence. Methods: We collected indoor and outdoor 24-hour measurements (Leq, 24hr) in eight homes located within 750 meters (m) of the nearest compressor station and three control homes located >1000m. We then evaluated how A-weighted decibel (dBA) exposure levels differed based on factors outlined above. Results: The geometric mean (GM) for 24-hour outdoor noise levels at homes located <300m (Leq,24hr: 60.3 dBA; geometric standard deviation (GSD): 1.0) from the nearest compressor station was nearly 9 dBA higher than control homes (Leq,24hr: 51.6 dBA; GSD: 1.1). GM for 24 hour indoor noise for homes <300m (Leq,24hr: 53.4 dBA; GSD: 1.2) from the nearest compressor station was 11.2 dBA higher than control homes (Leq,24hr: 42.2 dBA; GSD: 1.1). Indoor average daytime noise for homes <300m of the nearest compressor stations were 13.1 dBA higher than control homes, while indoor nighttime readings were 9.4 dBA higher. Conclusions: Findings indicate that living near a natural gas compressor station could potentially result in high environmental noise exposures. Larger studies are needed to confirm these findings and evaluate potential health impacts and protection measures. [ABSTRACT FROM AUTHOR]

Power systems for South and Central America based on 100% renewable energy (RE) in the year 2030 were calculated for the first time using an hourly resolved energy model. The region was subdivided into 15 sub-regions. Four different scenarios were considered: three according to different high voltage direct current (HVDC) transmission grid development levels (region, country, area-wide) and one integrated scenario that considers water desalination and industrial gas demand supplied by synthetic natural gas via power-to-gas (PtG). RE is not only able to cover 1813 TWh of estimated electricity demand of the area in 2030 but also able to generate the electricity needed to fulfil 3.9 billion m3 of water desalination and 640 TWhLHV of synthetic natural gas demand. Existing hydro dams can be used as virtual batteries for solar and wind electricity storage, diminishing the role of storage technologies. The results for total levelized cost of electricity (LCOE) are decreased from 62 €/MWh for a highly decentralized to 56 €/MWh for a highly centralized grid scenario (currency value of the year 2015). For the integrated scenario, the levelized cost of gas (LCOG) and the levelized cost of water (LCOW) are 95 €/MWhLHV and 0.91 €/m3, respectively. A reduction of 8% in total cost and 5% in electricity generation was achieved when integrating desalination and power-to-gas into the system. [ABSTRACT FROM AUTHOR]

Low-severity fires that killed few canopy trees played a significant historical role in dry forests of the western USA and warrant restoration and management, but historical rates of burning remain uncertain. Past reconstructions focused on on dating fire years, not measuring historical rates of burning. Past statistics, including mean composite fire interval (mean CFI) and individual-tree fire interval (mean ITFI) have biases and inaccuracies if used as estimators of rates. In this study, I used regression, with a calibration dataset of 96 cases, to test whether these statistics could accurately predict two equivalent historical rates, population mean fire interval (PMFI) and fire rotation (FR). The best model, using Weibull mean ITFI, had low prediction error and R2adj = 0.972. I used this model to predict historical PMFI/FR at 252 sites spanning dry forests. Historical PMFI/FR for a pool of 342 calibration and predicted sites had a mean of 39 years and median of 30 years. Short (< 25 years) mean PMFI/FRs were in Arizona and New Mexico and scattered in other states. Long (> 55 years) mean PMFI/FRs were mainly from northern New Mexico to South Dakota. Mountain sites often had a large range in PMFI/FR. Nearly all 342 estimates are for old forests with a history of primarily low-severity fire, found across only about 34% of historical dry-forest area. Frequent fire (PMFI/FR < 25 years) was found across only about 14% of historical dry-forest area, with 86% having multidecadal rates of low-severity fire. Historical fuels (e.g., understory shrubs and small trees) could fully recover between multidecadal fires, allowing some denser forests and some ecosystem processes and wildlife habitat to be less limited by fire. Lower historical rates mean less restoration treatment is needed before beginning managed fire for resource benefits, where feasible. Mimicking patterns of variability in historical low-severity fire regimes would likely benefit biological diversity and ecosystem functioning. [ABSTRACT FROM AUTHOR]

Imidacloprid is a neonicotinoid pesticide heavily used by the agricultural industry and shown to have negative impacts on honey bees above certain concentrations. We evaluated the effects of different imidacloprid concentrations in sugar syrup using cage and field studies, and across different environments. Honey bee colonies fed sublethal concentrations of imidicloprid (0, 5, 20 and 100 ppb) over 6 weeks in field trials at a desert site (Arizona), a site near intensive agriculture (Arkansas) and a site with little nearby agriculture but abundant natural forage (Mississippi) were monitored with respect to colony metrics, such as adult bee and brood population sizes, as well as pesticide residues. Hive weight and internal hive temperature were monitored continuously over two trials in Arizona. Colonies fed 100 ppb imidacloprid in Arizona had significantly lower adult bee populations, brood surface areas and average frame weights, and reduced temperature control, compared to colonies in one or more of the other treatment groups, and consumption rates of those colonies were lower compared to other colonies in Arizona and Arkansas, although no differences in capped brood or average frame weight were observed among treatments in Arkansas. At the Mississippi site, also rich in alternative forage, colonies fed 5 ppb imidacloprid had less capped brood than control colonies, but contamination of control colonies was detected. In contrast, significantly higher daily hive weight variability among colonies fed 5 ppb imidacloprid in Arizona suggested greater foraging activity during a nectar flow post treatment, than any other treatment group. Imidacloprid concentrations in stored honey corresponded well with the respective syrup concentrations fed to the colonies and remained stable within the hive for at least 7 months after the end of treatment. [ABSTRACT FROM AUTHOR]

Time spent fishing is the effort metric often studied in fisheries but it may under-represent the effort actually expended by fishers. Entire fishing trips, from the time vessels leave port until they return, may prove more useful for examining trends in fleet dynamics, fisher behavior, and fishing costs. However, such trip information is often difficult to resolve. We identified ~30,000 trips made by vessels that targeted walleye pollock (Gadus chalcogrammus) in the Eastern Bering Sea from 2008–2014 by using vessel monitoring system (VMS) and landings data. We compared estimated trip durations to observer data, which were available for approximately half of trips. Total days at sea were estimated with < 1.5% error and 96.4% of trip durations were either estimated with < 5% error or they were within expected measurement error. With 99% accuracy, we classified trips as fishing for pollock, for another target species, or not fishing. This accuracy lends strong support to the use of our method with unobserved trips across North Pacific fisheries. With individual trips resolved, we examined potential errors in datasets which are often viewed as “the truth.” Despite having > 5 million VMS records (timestamps and vessel locations), this study was as much about understanding and managing data errors as it was about characterizing trips. Missing VMS records were pervasive and they strongly influenced our approach. To understand implications of missing data on inference, we simulated removal of VMS records from trips. Removal of records straightened (i.e., shortened) vessel trajectories, and travel distances were underestimated, on average, by 1.5–13.4% per trip. Despite this bias, VMS proved robust for trip characterization and for improved quality control of human-recorded data. Our scrutiny of human-reported and VMS data advanced our understanding of the potential utility and challenges facing VMS users globally. [ABSTRACT FROM AUTHOR]

Energy production in the United States for domestic use and export is predicted to rise 27% by 2040. We quantify projected energy sprawl (new land required for energy production) in the United States through 2040. Over 200,000 km2 of additional land area will be directly impacted by energy development. When spacing requirements are included, over 800,000 km2 of additional land area will be affected by energy development, an area greater than the size of Texas. This pace of development in the United States is more than double the historic rate of urban and residential development, which has been the greatest driver of conversion in the United States since 1970, and is higher than projections for future land use change from residential development or agriculture. New technology now places 1.3 million km2 that had not previously experienced oil and gas development at risk of development for unconventional oil and gas. Renewable energy production can be sustained indefinitely on the same land base, while extractive energy must continually drill and mine new areas to sustain production. We calculated the number of years required for fossil energy production to expand to cover the same area as renewables, if both were to produce the same amount of energy each year. The land required for coal production would grow to equal or exceed that of wind, solar and geothermal energy within 2–31 years. In contrast, it would take hundreds of years for oil production to have the same energy sprawl as biofuels. Meeting energy demands while conserving nature will require increased energy conservation, in addition to distributed renewable energy and appropriate siting and mitigation. [ABSTRACT FROM AUTHOR]

For more than three decades, foot and musculoskeletal conditions have been documented among both Asian [Elephas maximus] and African [Loxodonta africana] elephants in zoos. Although environmental factors have been hypothesized to play a contributing role in the development of foot and musculoskeletal pathology, there is a paucity of evidence-based research assessing risk. We investigated the associations between foot and musculoskeletal health conditions with demographic characteristics, space, flooring, exercise, enrichment, and body condition for elephants housed in North American zoos during 2012. Clinical examinations and medical records were used to assess health indicators and provide scores to quantitate conditions. Using multivariable regression models, associations were found between foot health and age [P value = 0.076; Odds Ratio = 1.018], time spent on hard substrates [P value = 0.022; Odds Ratio = 1.014], space experienced during the night [P value = 0.041; Odds Ratio = 1.008], and percent of time spent in indoor/outdoor exhibits during the day [P value < 0.001; Odds Ratio = 1.003]. Similarly, the main risk factors for musculoskeletal disorders included time on hard substrate [P value = 0.002; Odds Ratio = 1.050] and space experienced in indoor/outdoor exhibits [P value = 0.039; Odds Ratio = 1.037]. These results suggest that facility and management changes that decrease time spent on hard substrates will improve elephant welfare through better foot and musculoskeletal health. [ABSTRACT FROM AUTHOR]

Ischemic heart disease (IHD) has been linked to exposures to airborne particles with an aerodynamic diameter <2.5 μm (PM2.5) in the ambient environment and in occupational settings. Routine industrial exposure monitoring, however, has traditionally focused on total particulate matter (TPM). To assess potential benefits of PM2.5 monitoring, we compared the exposure-response relationships between both PM2.5 and TPM and incidence of IHD in a cohort of active aluminum industry workers. To account for the presence of time varying confounding by health status we applied marginal structural Cox models in a cohort followed with medical claims data for IHD incidence from 1998 to 2012. Analyses were stratified by work process into smelters (n = 6,579) and fabrication (n = 7,432). Binary exposure was defined by the 10th-percentile cut-off from the respective TPM and PM2.5 exposure distributions for each work process. Hazard Ratios (HR) comparing always exposed above the exposure cut-off to always exposed below the cut-off were higher for PM2.5, with HRs of 1.70 (95% confidence interval (CI): 1.11–2.60) and 1.48 (95% CI: 1.02–2.13) in smelters and fabrication, respectively. For TPM, the HRs were 1.25 (95% CI: 0.89–1.77) and 1.25 (95% CI: 0.88–1.77) for smelters and fabrication respectively. Although TPM and PM2.5 were highly correlated in this work environment, results indicate that, consistent with biologic plausibility, PM2.5 is a stronger predictor of IHD risk than TPM. Cardiovascular risk management in the aluminum industry, and other similar work environments, could be better guided by exposure surveillance programs monitoring PM2.5. [ABSTRACT FROM AUTHOR]

Adult control of Aedes albopictus via ultra-low volume is difficult because this species occurs primarily in peridomestic habitats where obstacles such as buildings and vegetation can disrupt spray plumes and droplet dispersion. We determined droplet penetration and characterization of a pyrethroid adulticide applied from the ground at mid (46.77 ml/ha) and maximum (93.53 ml/ha) label rates within cryptic habitats of urban and suburban environments. Droplets were collected from all habitats, with no significant differences detected between locations within the same application rate or collection method. No differences were detected in droplet densities (drops per mm2) between rates within urban environments, but more droplets were collected in urban (149.93 ± 11.07 SE) than suburban sites (114.37 ± 11.32) at the maximum label rate (P = 0.003). The excellent penetration of aerosols into cryptic habitats of an urban site was likely due to the shorter spray paths afforded by our network of roads and alleys. Mid label rates displayed similar droplet density values as maximum label rates in urban areas, indicating that lower rates may be used effectively to reduce costs, lessen non-target effects, and increase environmental stewardship. Advances in formulations and technology are driving changes in adulticide applications, leading to use of the minimum effective dose for maximum efficacy, precision, and accountability. [ABSTRACT FROM AUTHOR]

Infestations of the common bed bug (Cimex lectularius L.) have increased substantially in the United States in the past 10–15 years. The housing authority in Harrisonburg, Virginia, conducts heat-treatments after bed bugs are detected in a lower-income housing complex, by treating each infested unit at 60°C for 4–6 hours. However, a high frequency of recurrent infestations called into question the efficacy of this strategy. Genetic analysis using Bayesian clustering of polymorphic microsatellite loci from 123 bed bugs collected from 23 units from May 2012 to April 2013 in one building indicated that (a) 16/21 (73%) infestations were genetically similar, suggesting ineffective heat-treatments or reintroductions from within the building or from a common external source, followed by local spread of existing populations; and (b) up to 5 of the infestations represented new genotypes, indicating that 5 new populations were introduced into this building in one year, assuming they were not missed in earlier screens. There was little to no gene flow among the 8 genetic clusters identified in the building. Bed bugs in the U.S. often possess one or both point mutations in the voltage-gated sodium channel, termed knockdown resistance (kdr), from valine to leucine (V419L) and leucine to isoleucine (L925I) that confer target-site resistance against pyrethroid insecticides. We found that 48/121 (40%) bed bugs were homozygous for both kdr mutations (L419/I925), and a further 59% possessed at least one of the kdr mutations. We conclude that ineffective heat treatments, new introductions, reintroductions and local spread, and an exceptionally high frequency of pyrethroid resistance are responsible for chronic infestations in lower-income housing. Because heat treatments fail to protect from reintroductions, and pesticide use has not decreased the frequency of infestations, preventing new introductions and early detection are the most effective strategies to avoid bed bug infestations in multistory apartment buildings. [ABSTRACT FROM AUTHOR]

Invasive feral swine (Sus scrofa) cause extensive damage to agricultural and wildlife resources throughout the United States. Development of sodium nitrite as a new, orally delivered toxicant is underway to provide an additional tool to curtail growth and expansion of feral swine populations. A micro-encapsulation coating around sodium nitrite is used to minimize detection by feral swine and maximize stability for the reactive molecule. To maximize uptake of this toxicant by feral swine, development a bait matrix is needed to 1) protect the micro-encapsulation coating so that sodium nitrite remains undetectable to feral swine, 2) achieve a high degree of acceptance by feral swine, and 3) be minimally appealing to non-target species. With these purposes, a field evaluation at 88 sites in south-central Texas was conducted using remote cameras to evaluate preferences by feral swine for several oil-based bait matrices including uncolored peanut paste, black-colored peanut paste, and peanut-based slurry mixed onto whole-kernel corn. These placebo baits were compared to a reference food, whole-kernel corn, known to be readily taken by feral swine (i.e., control). The amount of bait consumed by feral swine was also estimated using remote cameras and grid boards at 5 additional sites. On initial exposure, feral swine showed reduced visitations to the uncolored peanut paste and peanut slurry treatments. This reduced visitation subsided by the end of the treatment period, suggesting that feral swine needed time to accept these bait types. The black-colored peanut paste was visited equally to the control throughout the study, and enough of this matrix was consumed to deliver lethal doses of micro-encapsulated sodium nitrite to most feral swine during 1–2 feeding events. None of the treatment matrices reduced visitations by nontarget species, but feral swine dominated visitations for all matrices. It was concluded that black-colored peanut paste achieved satisfactory preference and consumption by feral swine, and no discernable preference by non-target species, compared to the other treatments. [ABSTRACT FROM AUTHOR]

With greater than 500,000 orthopaedic procedures performed in the United States each year requiring a bone graft, the development of novel graft materials is necessary. We report that some porous polymer/ceramic composite scaffolds possess intrinsic osteoinductivity as shown through their capacity to induce in vivo host osteoid mineralization and in vitro stem cell osteogenesis making them attractive synthetic bone graft substitutes. It was discovered that certain low crystallinity ceramics partially dissociate into simple signaling molecules (i.e., calcium and phosphate ions) that induce stem cells to endogenously produce their own osteoinductive proteins. Review of the literature has uncovered a variety of simple signaling molecules (i.e., gases, ions, and redox reagents) capable of inducing other desirable stem cell differentiation through endogenous growth factor production. Inductive simple signaling molecules, which we have termed inducerons, represent a paradigm shift in the field of regenerative engineering where they can be utilized in place of recombinant protein growth factors. [ABSTRACT FROM AUTHOR]

Numerous bark- and wood-infesting insects have been introduced to new countries by international trade where some have caused severe environmental and economic damage. Wood packaging material (WPM), such as pallets, is one of the high risk pathways for the introduction of wood pests. International recognition of this risk resulted in adoption of International Standards for Phytosanitary Measures No. 15 (ISPM15) in 2002, which provides treatment standards for WPM used in international trade. ISPM15 was originally developed by members of the International Plant Protection Convention to “practically eliminate” the risk of international transport of most bark and wood pests via WPM. The United States (US) implemented ISPM15 in three phases during 2005–2006. We compared pest interception rates of WPM inspected at US ports before and after US implementation of ISPM15 using the US Department of Agriculture AQIM (Agriculture Quarantine Inspection Monitoring) database. Analyses of records from 2003–2009 indicated that WPM infestation rates declined 36–52% following ISPM15 implementation, with results varying in statistical significance depending on the selected starting parameters. Power analyses of the AQIM data indicated there was at least a 95% chance of detecting a statistically significant reduction in infestation rates if they dropped by 90% post-ISPM15, but the probability fell as the impact of ISPM15 lessened. We discuss several factors that could have reduced the apparent impact of ISPM15 on lowering WPM infestation levels, and suggest ways that ISPM15 could be improved. The paucity of international interception data impeded our ability to conduct more thorough analyses of the impact of ISPM15, and demonstrates the need for well-planned sampling programs before and after implementation of major phytosanitary policies so that their effectiveness can be assessed. We also present summary data for bark- and wood-boring insects intercepted on WPM at US ports during 1984–2008. [ABSTRACT FROM AUTHOR]

Road sediment is a pervasive environmental medium that acts as both source and sink for a variety of natural and anthropogenic particles and often is enriched in heavy metals. Road sediment is generally understudied in the United States (U.S.) relative to other environmental media and compared to countries such as China and the United Kingdom (U.K.). However, the U.S. is an ideal target for these studies due to the diverse climates and wealth of geochemical, socioeconomic, demographic, and health data. This review outlines the existing U.S. road sediment literature while also providing key international perspectives and context. Furthermore, the most comprehensive table of U.S. road sediment studies to date is presented, which includes elemental concentrations, sample size, size fraction, collection and analytical methods, as well as digestion procedure. Overall, there were observed differences in studies by sampling time period for elemental concentrations, but not necessarily by climate in the U.S. Other key concepts addressed in this road sediment review include the processes controlling its distribution, the variety of nomenclature used, anthropogenic enrichment of heavy metals, electron microscopy, health risk assessments, remediation, and future directions of road sediment investigations. Going forward, it is recommended that studies with a higher geographic diversity are performed that consider smaller cities and rural areas. Furthermore, environmental justice must be a focus as community science studies of road sediment can elucidate pollution issues impacting areas of high need. Finally, this review calls for consistency in sampling, data reporting, and nomenclature to effectively expand work on understudied elements, particles, and background sediments. [Display omitted] • This review provides context for numerous pollution studies. • This review outlines U.S. road sediment literature and links international context. • Differences occur for element concentrations by sampling time period, particularly Pb. • Future work should consider smaller cities, rural areas, and environmental justice. • Future work should expand on understudied elements, particles, and background. [ABSTRACT FROM AUTHOR]

The ambiguous material identity of nanotechnology is a minor mystery of the history of contemporary science. This paper argues that nanotechnology functioned primarily in discourses of social, not physical or biological science, the problematic knowledge at stake concerning the economic value of state-supported basic science. The politics of taxonomy in the United States Department of Energy's Office of Basic Energy Sciences in the 1990s reveals how scientists invoked the term as one of several competing and equally valid candidates for reframing materials sciences in ways believed consonant with the political tenor of the time. The resulting loss of conceptual clarity in the sociology of science traces ultimately to the struggle to bridge the disjunction between the promissory economy of federal basic science and the industrial economy, manifested in attempts to reconcile the precepts of linearity and interdisciplinarity in changing socio-economic conditions over a half century. [ABSTRACT FROM AUTHOR]

During the last several decades, interdisciplinary research centers have emerged as a standard, powerful tool for federal funding of university research. This paper contends that this organizational model can be traced to the "Interdisciplinary Laboratories" program funded by the Advanced Research Projects Agency in 1960. The novelty of the IDL program was that it created a peer group of university laboratories with sustained funding to ensure their institutional stability. The Cornell Materials Science Center, one of the first three Interdisciplinary Laboratories, served as a breeding ground for a new community of engineering faculty members, who subsequently helped establish a series of interdisciplinary research centers at Cornell, including the National Research and Resource Facility for Submicron Structures (or National Submicron Facility) in 1977. The Materials Science Center and National Submicron Facility provided explicit models for the expansion and coordination of networks of interdisciplinary centers, both within single universities (such as Cornell) and across multiple campuses (through programs such as the National Nanotechnology Infrastructure Network and the Nanoscale Science and Engineering Centers). The center model has proved both flexible and durable in the face of changing demands on universities, By examining the Materials Science Center and the National Submicron Facility, we show that recent institutional developments perceived as entirely novel have their roots in the high Cold War years. [ABSTRACT FROM AUTHOR]

The 1990s saw a radical shift in the US investment in large-scale projects along with a shift in the rationale for US support of such projects and the national laboratories which host them. Previously, the largest projects were for the esoteric field of high energy and justifications drew on the Cold War priorities of national security and the cultural benefits of a free society. Starting with Argonne National Laboratory's Advanced Photon Source, a materials science accelerator, all this changed. From this time forward those promoting large-scale projects instead pointed to more practical considerations in line with the post-Cold-War moral economy valuing entrepreneurship and measurable utility. It might seem that change resulted from a direct competition between high energy physicists and materials scientists that was mediated by high-level policy makers in favor of the latter. This case study reveals a much more telling and nuanced story in which science policy was shaped at every turn by the need of the US national laboratories to adapt to a changing social, political, economic, technological and scientific context amidst the underlying desire for institutional persistence. [ABSTRACT FROM AUTHOR]

Abstract: The US Department of Energy, Office of Fusion Energy Sciences (OFES) conducted a Research Needs Workshop, referred to as ReNeW, in June 2009. The information developed at this workshop will help OFES develop a plan for US fusion research during the ITER era, roughly the next two decades. The workshop was organized in five Themes, one of which was Harnessing Fusion Power (or Fusion Power for short). The top level goal of the Fusion Power Theme was to identify the research needed to develop the knowledge to design and build, with high confidence, robust and reliable systems that can convert fusion products to useful forms of energy in a reactor environment, including a self-sufficient supply of tritium fuel. Each Theme was subsequently subdivided into Panels to address specific topics. The Fusion Power Panel topics were: Fusion Fuel Cycle; Power Extraction; Materials Science; Safety and Environment; and Reliability, Availability, Maintainability and Inspectability (RAMI). Here we present the key findings of the Fusion Power Theme. [ABSTRACT FROM AUTHOR]

The article focuses on the history of the Intense Pulsed Neutron Source (IPNS), an accelerator-driven neutron source for exploring the structure of materials through neutron scattering, a program run at the Argonne National Laboratory under the supervision of the U.S. Department of Energy. Some of the subjects explored include the field of materials science, 20th century science policy in the United States, the technologies involved in particle acceleration, and morale among the scientists employed at Argonne.

The article discusses the nature of empirical research in strength of materials science during the early 19th century in the U.S. Research focused on yielding practical tools that would allow engineers to predict the behavior of materials as they built the nation's infrastructure is analyzed. It is suggested that these methods, tailored to accommodate the different kinds of materials in America, reflected a belief in the providential site of the American political experiment. How the natural bounty of resources impacted societal values regarding exceptionalism and the character of the nation is assessed. The work of materials scientist Joseph Gilbert Totten is examined.

The Division of Materials Sciences and Engineering of the US Department of Energy (DOE) sponsored a workshop to identify cutting-edge research needs and opportunities, enabled by the application of theoretical and applied mechanics. The workshop also included input from biochemical, surface science, and computational disciplines, on approaching scientific issues at the nanoscale, and the linkage of atomistic-scale with nano-, meso-, and continuum-scale mechanics. This paper is a summary of the outcome of the workshop, consisting of three main sections, each put together by a team of workshop participants.Section 1 addresses research opportunities that can be realized by the application of mechanics fundamentals to the general area of self-assembly, directed self-assembly, and fluidics. Section 2 examines the role of mechanics in biological, bioinspired, and biohybrid material systems, closely relating to and complementing the material covered in Section 1. In this manner, it was made clear that mechanics plays a fundamental role in understanding the biological functions at all scales, in seeking to utilize biology and biological techniques to develop new materials and devices, and in the general area of bionanotechnology. While direct observational investigations are an essential ingredient of new discoveries and will continue to open new exciting research doors, it is the basic need for controlled experimentation and fundamentally-based modeling and computational simulations that will be truly empowered by a systematic use of the fundamentals of mechanics.Section 3 brings into focus new challenging issues in inelastic deformation and fracturing of materials that have emerged as a result of the development of nanodevices, biopolymers, and hybrid bio–abio systems.Each section begins with some introductory overview comments, and then provides illustrative examples that were presented at the workshop and which are believed to highlight the enabling research areas and, particularly, the impact that mechanics can make in enhancing the fundamental understanding that can lead to new technologies. [Copyright &y& Elsevier]

The Pennsylvania State University at University Park is one of the most dominant materials research institutions in the US with more than $65 million in sponsored materials research funding for fiscal year 2002, and possessing more than twice the number of most highly cited researchers in materials science of any university worldwide. The Materials Research Institute (MRI), an interdisciplinary consortium at Penn State, integrates and leads these activities across the university and maintains world-class facilities to support them. More than 200 faculty and 500 graduate students are engaged in materials research, along with nearly 200 postdoctoral and visiting scientists. This high concentration of faculty and experts at the university has facilitated the formation of cohesive teams to meet specific materials research goals. [Copyright &y& Elsevier]

Focuses on the use of size exclusion chromatography in the improvement of materials sciences in New Hampshire. Application of separations technique to biopolymers; Complexity of biopolymer mixtures; Characteristics of polymers.

Availability of external funding influences the viability and structure of scientific fields. In the 1980s, structural changes in the manner in which external funds became available started to have an impact on materials science and engineering in the United States. These changes colluded with the search for a disciplinary identity of this research field inside the university. The solutions that arose were intended to find a mediating structure between external demands and resources and disciplinary orientation. Interviews with seventeen scientists in seven universities revealed the impact in local university settings. The rise of research centers as new organizational units in universities can be linked to two periods. In the 1960s, expensive instruments stimulated unit formation; in the 1980s, the increase in application-related funding forced new administrative ways. It is shown that organizational changes also have an impact on disciplinary identity as witnessed by a strong increase in interdisciplinary materials Ph.D.s awarded. [ABSTRACT FROM AUTHOR]

A full-year survey-of-materials-science course as offered at Bowling Green State University for the past 5 years is described. The course has several unique features, including a modular, team-taught approach with a laboratory component. The laboratory segment is the most demanding portion of the course to set up, and alternatives are discussed in adapting equipment on hand to the course. The feasibility of offering a course in materials science in a nonengineering setting is discussed and some problems associated with offering the course in the "arts and sciences" context are examined. [ABSTRACT FROM AUTHOR]

Explains the materials science and engineering (MSE) discipline in the United States (U.S.). Interdisciplinarity between materials science and engineering; Invention of the concept of materials during the Cold War; Information on the project of the U.S. Department of Defense with the Advanced Research Project Agency; Reason for the neglect of the role of chemistry in materials science research.

Features the development of combinatorial chemistry in material science by engineers in the United States. Reports from the National Academy of Science's Committee on Science, Engineering and Public Policy; Details on the formulation of the method; Recognition on the performance of the method applied in Symyx.

The article discusses a rebirth of the SLAC National Accelerator Laboratory, née Stanford Linear Accelerator Center, and its use of an X-ray laser, reportedly the world's first. It notes director and particle physicist Persis Drell and SLAC's redefined mission including X-ray studies, materials science, and structural biology. Relations between SLAC and the U.S. Department of Energy, its owner, are noted. The X-ray laser, called the Linac Coherent Light Source (LCLS), was started on April 10, 2009 and experiments reportedly were initiated a week before publication of the article. Criticism by unnamed particle physicists is noted regarding the decision to abandon SLAC's last particle collider called PEP-II.

The article provides information on the Basic Energy Sciences (BES) program which comprises of research on materials science, condensed-matter physics, chemistry and nanotechnology supported by the U.S. Department of Energy (DOE). For half a century after World War II the department channelized funds for the research of nuclear and high-energy particle physics. It informs of the building of "user facilities" by the department for the carrying out of research on various fields. It provides information on ongoing research on materials science in the Oak Ridge National Laboratory in Tennessee. It also provides information on the controversies that have ensued over the DOE's BES program.

Comments on the evolving curriculum in materials science and engineering in the U.S. Development of materials and science engineering as a university department; Suggestion that it has been long recognized that interdisciplinarity is at the core of materials science; Assertion that the emergence of materials science and engineering as an academic discipline was logical pedagogical development.