Search

Accurately monitoring Canopy Nitrogen Concentration (CNC) is a prerequisite for precision nitrogen (N) fertiliser management at the farm scale with carbon and N budgeting across the landscape and ecosystems. While many spectral indices have been proposed for CNC monitoring, their applicability and accuracy are often adversely affected by confounding factors such as aboveground biomass (AGB), crop type, growth stages, and environmental conditions, limiting their broader application and adoption; with AGB being one of the most dominant signals and confounding factors at canopy scale. The confounding effect can become more challenging as AGB is also physiologically linked with CNC across the growth stages. Additionally, the interplay between index form, selection of optimal wavebands and their bandwidths remains poorly understood for CNC index design. This study proposes robust and cost-effective 2- and 4-waveband multispectral (MS) CNC indices applicable across a wide range of crop conditions. We collected 449 canopy reflectance spectra (400–980 nm) together with corresponding CNC and AGB measurements across four growth stages of ryegrass (winter and summer), and five growth stages of barley (winter-spring) in Victoria, Australia, in 2018 and 2019. All possible waveband (400–980 nm) combinations revealed that the best combination varied between seasons and crop types. However, the visible spectrum, particularly the blue region, presented high and consistent performance. Bandwidths of 10–40 nm outperformed either very narrow (2 nm) or very broad bandwidths (80 nm). The newly developed 2-waveband index (416 and 442 nm with 10-nm bandwidth; R2 = 0.75 and NRMSE = 0.2) and 4-waveband index (512, 440, 414 and 588 nm with 40-nm bandwidth; R2 = 0.81 and NRMSE = 0.17) exhibited the best performance, while validation with an independent dataset (from a different growing period to those used in the model development) obtained NRMSE values of 0.25 and 0.24, respectively. The 4-waveband index provides enhanced performance and permits use of broader bandwidths than its 2-waveband counterpart. [ABSTRACT FROM AUTHOR]

X-band KOMPSAT-5 provides a good perspective for soil moisture retrieval at high-spatial resolution over arid and semi-arid areas. In this paper, an intercomparison of KOMPSAT-5 and C-band Sentinel-1 radar data in soil moisture retrieval was conducted over agricultural fields in Wimmera, Victoria, Australia. Optical images from Sentinel-2 were also used to calculate the scattering contribution of vegetation. This study employed a new semi-empirical vegetation scattering model with a linear association of soil moisture with observed backscatter coefficient and vegetation indices. The Combined Vegetation Index (CVI) was proposed and first used to parameterize vegetation water content. As a result, the vegetation scattering model was developed to monitor soil moisture based on remotely sensed data and ground measurements. Application of the algorithm over dryland wheat field sites demonstrated that the estimated satellite-based soil moisture contents have good linear relationships with the ground measurements. The correlation coefficients (R) are 0.862 and 0.616, and the root mean square errors (RMSEs) have the values of 0.020 cm3/cm3 and 0.032 cm3/cm3 at X- and C-bands, respectively. Furthermore, the validation results also indicated that X-band provided higher consistent accuracy for soil moisture inversion than C-band. These results showed significant promise in retrieving soil moisture using KOMPSAT-5 and Sentinel-1 remotely sensed data at high-spatial resolution over agricultural fields, with subsequent uses for crop growth and yield estimation. [ABSTRACT FROM AUTHOR]

• Sobol' method is used to evaluate the sensitivity of APSIM-Wheat yield predictions. • Yield is most sensitive to initial nitrogen amount, soil parameters, precipitation. • Estimated yield is influenced most by the limiting resource under given conditions. • Scenarios for high fertilization level or dry seasons have lower yield variability. The performance of cropping system models is often limited by uncertainties in model parameters and inputs. This study aims to explore how model yield prediction responds to these uncertainties under various environmental and management conditions. The Sobol' method was used to investigate the sensitivity of the Agricultural Production Systems SIMulator (APSIM)-Wheat yield prediction to the following factors: air temperature (maximum and minimum), precipitation, initial soil nitrogen content, nitrogen fertilization amount, and soil hydraulic parameters. Eighteen scenarios were defined to consider a combination of three weather conditions (wet, normal, and dry growing season, based on the historical climatology of the Wimmera district of Victoria, Australia), three soil types (sandy, loamy, and clayey soils), and two nitrogen fertilization applications (50 and 100 kg N/ha). Eight thousand APSIM simulations were used to calculate the first order and total sensitivity indices for each scenario. The effects of weather, soil water characteristics and nitrogen availability were estimated by measuring their impacts on sensitivity indices. Our results show that yield was more sensitive either to variables that control water availability (precipitation and soil type) or variables that control nitrogen availability, depending on which was more limiting to wheat growth under the scenario. For example, in case of low nitrogen fertilization scenario, the initial nitrogen content sensitivity ranked first. Variation of this factor contributed 64% to 79% to the variance in simulated yield for clayey soils, nearly four times higher than the second-ranked factor (nitrogen fertilization amount). Soil hydraulic parameters and precipitation were most important when the crop growth was more constrained by water availability than by nitrogen availability. In the case of sandy soils in dry years with high nitrogen fertilization level, soil parameters and precipitation accounted for 83% of the yield variability. Minimum temperature consistently ranked as the least important factor under all scenarios. This work will help researchers better understand the model inputs' impacts on the simulated yield variability under various soil, management, and weather conditions. The results also support agronomists and practitioners in the optimal use of the APSIM-Wheat model as a management tool. [Display omitted] [ABSTRACT FROM AUTHOR]

The conventional Land Surface Temperature (LST)–Normalized Difference Vegetation Index (NDVI) trapezoid model has been widely used to retrieve vegetation water stress. However, it has two inherent limitations: (1) its complex and computationally intensive parameterization for multi-temporal observations and (2) deficiency in canopy water content information. We tested the hypothesis that an improved water stress index could be constructed by the representation of canopy water content information to the LST–NDVI trapezoid model. Therefore, this study proposes a new index that combines three indicators associated with vegetation water stress: canopy temperature through LST, canopy water content through Surface Water Content Index (SWCI), and canopy fractional cover through NDVI in one temporally transferrable index. Firstly, a new optical space of SWCI–NDVI was conceptualized based on the linear physical relationship between shortwave infrared (SWIR) and soil moisture. Secondly, the SWCI–NDVI feature space was parameterized, and an index d(SWCI, NDVI) was computed based on the distribution of the observations in the SWCI–NDVI spectral space. Finally, standardized LST (LST/long term mean of LST) was combined to d(SWCI, NDVI) to give a new water stress index, Temperature Vegetation Water Stress Index (TVWSI). The modeled soil moisture from the Australian Water Resource Assessment—Landscape (AWRA-L) and Soil Water Fraction (SWF) from four FLUXNET sites across Victoria and New South Wales were used to evaluate TVWSI. The index TVWSI exhibited a high correlation with AWRA-L soil moisture (R2 of 0.71 with p < 0.001) and the ground-based SWF (R2 of 0.25–0.51 with p < 0.001). TVWSI predicted soil moisture more accurately with RMSE of 21.82 mm (AWRA-L) and 0.02–0.04 (SWF) compared to the RMSE ranging 28.98–36.68 mm (AWRA-L) and 0.03–0.05 (SWF) were obtained for some widely used water stress indices. The TVWSI could also be a useful input parameter for other environmental models. [ABSTRACT FROM AUTHOR]

• Eighteen spectral indices are compared for their sensitivity to CNC and biomass. • Of these indices, PRI best correlates with CNC but it also correlates with biomass. • Regression relationships between CNC and all indices shift with growth stages. • CCCI exhibits stronger correlation to biomass than CNC. • A wide range of growth conditions are needed to develop a robust indicator for CNC. In precision farming, accurate estimation of canopy nitrogen concentration (CNC) is valuable for effective crop growth monitoring and nitrogen (N) fertiliser management. To date, many canopy multispectral indices have been proposed as indicators for CNC; however, many of these indices have also shown sensitivity to biomass and their performance drops at high biomass levels. Dependence on growth stage, season, or other environmental conditions limits their efficacy as generalized CNC indices. The objectives of this study were to assess the robustness of popular CNC indices across a wide range of biomass levels and fertiliser application levels; and for two contrasting seasons – winter and summer. To achieve this, we analysed the efficacy of seven canopy nitrogen indices, including canopy chlorophyll content index (CCCI), together with eleven other commonly used spectral indices. We used canopy level solar-induced hyperspectral reflectance data acquired using a hand-held optical spectroradiometer across four growth stages in winter (May-June 2018) and four in summer (January-February 2019) from an experimental field of irrigated perennial ryegrass with variable N application in Victoria, Australia. The field contained 40 plots, each with one of eight different N treatments. Almost all the indices exhibited similar correlation to CNC (%) when applied to individual stages (days) in both winter and summer; however, relationships between CNC and individual indices varied significantly between stages. We obtained similar results for canopy biomass. When the data across the entire range of growth stages and seasons were combined, the correlations between most canopy nitrogen indices and CNC became weak (R2 < 0.25, 0.9% ≤ RMSE ≤ 1.0%). PRI exhibited the highest correlation with CNC (R2 = 0.58, RMSE = 0.7%) for the combined data set. Even so, PRI's association with CNC and canopy biomass changed with the season. Most indices responded to both CNC and biomass simultaneously, and this confounds the estimation of CNC due to strong but growth stage-specific relationships between CNC and canopy biomass. This study shows that it is important to consider a wide range of conditions when evaluating multispectral CNC indices. [ABSTRACT FROM AUTHOR]

As the fundamental regulator of energy exchange in the vegetation–soil–atmosphere circulation system, soil moisture is a key parameter for drought monitoring and is indispensable to the land surface hydrological processes. In order to overcome the constraints of the Perpendicular Drought Index, PDI (performs poorly over the fields with dense vegetation and hard to construct the soil line), and the Temperature Vegetation Drought Index, TVDI (requires similar atmospheric forcing and large enough dimension of mapping area), in soil moisture monitoring, a new drought index (Normalized Temperature Drought Index, NTDI) is proposed to explore the spatiotemporal changes of soil moisture by substituting red and near-infrared reflectances with vegetation index and normalized land surface temperature on the basis of the PDI framework. Victoria, Australia, was selected as the study area as it experiences many severe droughts and has been affected for more than ten years. Time series of satellite-based data were applied to evaluate the effectiveness and applicability of the NTDI at the regional scale. Results indicated that the expression of the soil line representing the water condition of the bare soil is easier to obtain in the new trapezoid framework and has good fits with the coefficients of determination (R2) of more than 0.8. Compared with PDI, TVDI and Modified PDI (MPDI) at the cropping sites, NTDI exhibits a relatively better performance in soil moisture monitoring for most days where the R2 achieved can reach to more than 0.7 on DOY 242, 254 and 272. Meanwhile, spatial–temporal mappings of the four drought indices from satellite data were conducted, and the NTDI presented the slightly seasonal variation and effectively described the real spatial characteristics of regional drought. Overall, the NTDI seems to a viable approach and can provide insight into spatial and temporal soil moisture monitoring at different scales. [ABSTRACT FROM AUTHOR]