Search

Fluid mud (FM) is a unique sedimentary feature in high‐turbidity estuaries, where it can make a rapid contribution to morphodynamics. Insufficient field measurements and fixed‐point monitoring lead to deficient understandings of the formation, transport, and breakdown of the FM under extreme weather conditions. A field survey was conducted in the Changjiang Estuary during the period of turbidity maximum, just after Typhoon Haikui. The measurements captured the formation of the FM beneath the suspended layers, particularly around the lower reach of the North Passage. The thickness of the observed FM gradually decreased landward along the channel, with the maximum value reaching ~0.9 m. The major features of the observed storm‐induced FM were simulated using the Finite‐Volume Community Ocean Model. The results indicated that the initial appearance of the FM was the result of a typhoon‐intensified, salinity‐induced stratification in the outlet region. The subsequent landward propagation of the FM was driven by the combined effects of the FM‐induced mud surface pressure gradient force and saltwater intrusion near the bottom. Weak mixing during the subsequent neap tidal period sustained the FM as it rapidly extended into the middle region of the North Passage. This produced a large velocity shear at the interface of the FM and upper suspension layer, increasing the entrainment from the FM to the upper suspension layer. As a result of the increased tidal mixing, the FM weakened and then finally broke down in the subsequent spring tidal period. Plain Language Summary: The environment along the large river to estuary continuum is generally turbid and frequently produces highly concentrated benthic sediment suspensions, that is, fluid mud (FM). The FM is a sediment feature, with a concentration mostly in the range of 10 to >100 g/L. It is difficult to track the FM's movement and breakdown. The response of the FM to extreme atmospheric and oceanic conditions is therefore not well understood. In this study, a comprehensive field campaign identified the large‐scale formation of the FM after a severe tropical storm in the Changjiang Estuary. The life cycle of the FM in this estuary cannot, however, be determined through the field observation alone. A two‐layer FM model was developed to achieve this goal. The experiments suggested that the key physical factor was the stratification resulting from the typhoon‐enhanced saltwater intrusion. This led to the formation of the FM in the near‐bottom layer. After the FM formed, it extended onshore along the channel under the influence of an ambient saltwater intrusion. The FM was constrained in the benthic layer as a consequence of weak mixing from the saltwater intrusion. The breakdown of the FM was governed by enhanced tidal mixing in the subsequent spring tide. Key Points: A strong fluid mud (FM) formed during the passage of a tropical stormA storm‐increased stratification initially triggered a massive formation of the FMThe FM was sustained and transported by saltwater intrusion, and it subsequently broke down during the strong‐mixing spring tide [ABSTRACT FROM AUTHOR]

Lateral flow significantly contributes to the near‐bottom mass transport of salinity in a channel‐shoal system. In this study, an integrated tripod system was deployed in the transition zone of a channel‐shoal system of the Changjiang Estuary (CE), China, to observe the near‐bottom physics with high temporal/spatial resolution, particularly focusing on the lateral‐flow‐induced mass transport. These in situ observations revealed a small‐scale salinity fluctuation around low water slack during moderate and spring tidal conditions. A simultaneous strong lateral current was also observed, which was responsible for this small‐scale fluctuation. A high‐resolution unstructured‐grid Finite‐Volume Community Ocean Model has been applied for the CE to better understand the mechanism of this lateral flow and its impact on salinity transport. The model results indicate that a significant southward near‐bed shoal‐to‐channel current is generated by the salinity‐driven baroclinic pressure gradient. This lateral current affects the salinity transport pattern and the residual current in the cross‐channel direction. Cross‐channel residual current shows a two‐layer structure in the vertical, especially in the intermediate tide when the lateral flow notably occurred. Both observation and model results indicate that near‐bottom residual transport of water moved consistently southward (shoal to channel). Mechanisms for this intratidal salinity variation and its implications can be extended to other estuaries with similar channel‐shoal features. Plain Language Summary: In channel‐shoal systems, lateral processes sometimes can be of great significance, for example, influencing salinity and sediment transport, even some biogeochemical matters that influence the water environment. Salinity and sediment transport will have a further effect on navigability, ecology, and so on, for example, sediment deposition issues, which significantly decrease the shipping capacity. Consequently, knowing the accurate information about the flow field and finding a criterion for pronounced lateral processes are important to better understand hydrodynamics and sediment behaviors in channel‐shoal systems. Here in this study, we conducted an in situ observation and used numerical simulation to detect and predict a strong lateral flow in the North Passage of the Changjiang Estuary. This shoal‐to‐channel lateral flow occurred around the end of ebb and caused an intratidal salinity variation at the observation site, close to the deep channel. Therefore, a link between pronounced lateral flows and typical salinity variation can be established. This link can also be found in other estuaries like Hudson River estuary. Findings presented here will help to easily distinguish pronounced lateral flows and better understand the effect of lateral flows. Key Points: Intratidal salinity variation (ISV) and a strong lateral flow in a channel‐shoal system were identified by an integrated tripod systemNumerical simulation reveals that lateral flows were primarily driven by the salinity‐induced pressure gradient forceLateral flows can be generated or enhanced by human interventions such as groyne fields [ABSTRACT FROM AUTHOR]

In the past, two physical mechanisms, baroclinic instability (BI) and strong asymmetric tidal mixing (SATM) during the spring tidal period, were proposed for the offshore detachment of the low-salinity plume over the inner shelf of the East China Sea (ECS). These two mechanisms were re-examined using both observations and a fully three-dimensional (3-D), high-resolution, unstructured-grid, free-surface, primitive-equation, Finite-Volume Community Ocean Model (FVCOM). The observed currents and salinities showed that the plume was characterized by a two-layer system, in which the upper layer is mainly driven by the river discharge-induced buoyancy flow and the lower layer is predominantly controlled by tidal mixing and rectification. The SATM mechanism was based on the model run without calibration against observed currents and salinity around the plume region, so that it should be applied with caution to a realistic condition observed on the inner shelf of the ECS. The BI mechanism was derived under a condition without consideration of tidal mixing. Although BI could still occur along the frontal zone when tides were included, it was unable to produce a single, large, detached low-salinity lens observed on the inner shelf of the ECS. The process-oriented model experiment results suggest that for a given river discharge and realistic tidal flow, the spatially non-uniform southwesterly surface wind during the southeast monsoon-dominant summer could increase frontal spatial variability and thus produce a significant offshore detachment of low-salinity water on the inner shelf of East China Sea. [ABSTRACT FROM AUTHOR]

Zhao, C.; Ge, J., and Ding, P., 2014. Impact of sea level rise on storm surges around the Changjiang Estuary. The potential impacts of sea level rise (SLR) on storm surge around the Changjiang Estuary and the Hangzhou Bay are investigated using a shallow-water circulation model ADCIRC coupled with a spectral wave model SWAN. The validated model is applied to two typical typhoons under three scenarios: 1.0 m SLR, 0.483 m SLR and present sea-level condition. In consideration of interactions of tide, waves and surge, the impact exerted by SLR on tide and waves are also discussed. The migration of the amphidromes generated by SLR causes the co-phase lines to defect relatively counterclockwise near the Changjiang Estuary. The amplitude of tide increases slightly at the inner mouth of the Changjiang River, and more notable increases are presented at the northern part of the Changjiang River Mouth. The amplitude of tide decreases in adjacent areas of the Hangzhou Bay. The wave heights respond to the sea level rise in a non-linear and spatially non-uniform manner. Comparing the maximum wave height between each scenario, the wave height increase is found to be significant in shallow areas due to the increase in water depth. The breaking locations of the wave shift shoreward. The general patterns in wave height change are approximately determined by the typhoon path and topography. As for changes in surge and elevation, time series of water surface curves and peak value distribution are all analyzed. The curves of surges and water elevations accelerate slightly relative to that of the control scenario. The surges are not very sensitive to the SLR and the variations in elevation could mainly attribute changes in tide, with the changing extents ranging from a few to a dozen centimeters. Taking the value of SLR into account, the peak of elevation near shore could experience a significant increase in the future. All the properties respond to sea level rise in a non-linear and spatially non-uniform manner. [ABSTRACT FROM AUTHOR]

Abstract: This study investigated the effects of sediment dewatering on the phosphorus transformations concerning about the production and emission of phosphine in the intertidal marsh of the Yangtze Estuary. The concentrations of matrix-bound phosphine ranged from 18.62–72.53ngkg−1 and 31.14–61.22ngkg−1 within the August and January exposure incubations, respectively. The responses of matrix-bound phosphine concentrations to sediment dessication demonstrate that the production (or accumulation) of matrix-bound phosphine significantly increased with water loss at the start of the emersion incubations. However, further dehydration inhibited the formation of matrix-bound phosphine in sediments. The significant correlations of matrix-bound phosphine with the organic-P bacteria abundance and alkaline phosphatase activities implicate that the production of matrix-bound phosphine within the dessication incubations was linked closely to the microbial decomposition of organic P. The emissions of phosphine generally decreased with sediment dewatering, with the fluxes of 7.51–96.73ngm−2 h−1 and 5.34–77.74ngm−2 h−1 over the exposure incubations of both August and January, respectively. Also, it is observed that the releases of phosphine during the entire exposure periods were affected not only by its production but also by sediment water and redox conditions. [Copyright &y& Elsevier]