Search

Zinc oxide nanoparticle (ZnO NPs) has been used as a fertilizer alternative, although some applications technique and metal-microbial effects should be studied. This research evaluated the bioefficiency of synthetic ZnO NPs in soybean seedlings combined with different water status and with or without PcO6 bacteria. ZnO NPs performed in sand inhibited growth and fluorescence parameters. Still, when soybean seeds were exposed to ZnO NPs seed priming the root mass was increased, mainly in non-drought conditions. Soybean plants cultivated in drought conditions will have compromised development, although was demonstrate soybeans seed inoculation with PcO6 may decrease undesired effects from drought. Also, PcO6 soybean inoculation mitigate metal ZnO toxicity. Here, one of the first positive report about soybean interaction with PcO6 by drought and metal mitigation of toxicity. In addition, the best way to apply ZnO was through seed priming, while sand application was toxic and foliar application had no effects. [ABSTRACT FROM AUTHOR]

It is necessary to increase the agronomic use efficiency of urea to reduce ammonia volatilization and increase crop yield. However, relying solely on urea for the enhanced efficiency technologies development could harm fertilizer integrity, resulting in reduced application quality and fertilizer storage time. The authors aimed at developing and characterizing the physical, chemical, and physicochemical quality of a novel enhanced efficiency fertilizers, synthesized from urea plus boron (B), zinc (Zn), nickel (Ni), or molybdenum (Mo) addition, with or without N-(n-butyl) thiophosphoric triamide (NBPT) associated. Hygroscopicity, hardness, salt index (SI), pH, and thermogravimetric decomposition were the parameters evaluated. Fertilizer quality was assessed through microscopic X-ray fluorescence, microtomography, and scanning electron microscopy. Micronutrients were added by coating or granulation; they were homogeneously distributed over the fertilizer’s granules. The fertilizers’ hardness increased up to 86% with Zn coated compared with uncoated. Granulated urea with B, Zn, Ni, or Mo had greater internal porosity, which resulted in lower hardness. Boron and Zn addition to the fertilizers increased the hygroscopicity in average 388% and 473%, respectively, compared with hygroscopicity observed for urea. Moreover, hygroscopicity was increased by an average of 56% with NBPT addition. Micronutrients addition to the urea granules increased the SI, while thermal decomposition stages of urea were unaffected by micronutrients addition. Enhanced efficiency fertilizers require characterization before agronomic efficiency tests due to changes in their physical, chemical, and physicochemical properties. Unfavorable changes could harm granules integrity and application efficiency in the field, resulting in economic losses to the industry and farmers. [ABSTRACT FROM AUTHOR]

It is necessary to increase the agronomic use efficiency of urea to reduce ammonia volatilization and increase crop yield. However, relying solely on urea for the enhanced efficiency technologies development could harm fertilizer integrity, resulting in reduced application quality and fertilizer storage time. The authors aimed at developing and characterizing the physical, chemical, and physicochemical quality of a novel enhanced efficiency fertilizers, synthesized from urea plus boron (B), zinc (Zn), nickel (Ni), or molybdenum (Mo) addition, with or without N-(n-butyl) thiophosphoric triamide (NBPT) associated. Hygroscopicity, hardness, salt index (SI), pH, and thermogravimetric decomposition were the parameters evaluated. Fertilizer quality was assessed through microscopic X-ray fluorescence, microtomography, and scanning electron microscopy. Micronutrients were added by coating or granulation; they were homogeneously distributed over the fertilizer’s granules. The fertilizers’ hardness increased up to 86% with Zn coated compared with uncoated. Granulated urea with B, Zn, Ni, or Mo had greater internal porosity, which resulted in lower hardness. Boron and Zn addition to the fertilizers increased the hygroscopicity in average 388% and 473%, respectively, compared with hygroscopicity observed for urea. Moreover, hygroscopicity was increased by an average of 56% with NBPT addition. Micronutrients addition to the urea granules increased the SI, while thermal decomposition stages of urea were unaffected by micronutrients addition. Enhanced efficiency fertilizers require characterization before agronomic efficiency tests due to changes in their physical, chemical, and physicochemical properties. Unfavorable changes could harm granules integrity and application efficiency in the field, resulting in economic losses to the industry and farmers. [ABSTRACT FROM AUTHOR]

The yield gain of soybean inoculated with Bradyrhizobium spp. or co-inoculated with Bradyrhizobium spp. and Azospirillum brasilense is variable. Inoculants can be applied in the sowing furrow or via seed treatment. There is a gap in our understanding of the efficacy of different inoculation methods. This study aimed to assess the agronomic efficiency of soybean inoculated and co-inoculated with Bradyrhizobium spp. and A. brasilense by different methods. The study was conducted in Paraná State, Brazil, in two seasons. Five treatments were tested: control; seed treatment with Bradyrhizobium spp. (SBr), seed treatment with Bradyrhizobium spp. + A. brasilense (SBr+Az), in-furrow treatment with Bradyrhizobium spp. (FBr), and in-furrow treatment with Bradyrhizobium spp. + A. brasilense (FBr+Az). Shoot dry weight, grain nitrogen content and grain yield were lower in 2018/19. In 2017/18, FBr+Az increased nodule number and dry weight compared with SBr. FBr+Az promoted a 47% increase in pods per plant compared with the control in both seasons. Regardless of season, grain nitrogen content was higher with FBr+Az (mean relative increase of 27%). FBr+Az was superior to SBr+Az in 2017/18, with a 12% increase in yield. Inoculation and co-inoculation improve morphological traits and soybean yield. In-furrow inoculation is more efficient than seed treatment. [ABSTRACT FROM AUTHOR]

Emission of nitrous oxide (N2O) can be reduced using enhanced efficiency nitrogen fertilizers (EEFs), such as urease inhibitors and coating technologies. In this study, we evaluated the potential of EEFs to reduce N2O emissions in maize in a clayey Inceptisol subjected to no-till management under summer subtropical conditions, in southern Brazil. The EEF sources used included urea containing N-(n-butyl) thiophosphoric triamide (UR-NBPT), polymer-coated urea (UR-pol), in addition common urea (UR), nitrate (CN) and control treatment without the application of nitrogen fertilizer. N2O emissions were assessed using the static chamber method during one maize season and analyzed through non-linear regression, using a logistic model. The accumulated emission was 0.817, 0.613, 0.457 and 0.393 kg N2O ha−1, for CN, UR, UR-pol and UR-NBPT, respectively. The maximum daily emission of N2O did not vary between amidic forms, however for CN it occurred on the 4th day after application (DAA), while for urea forms it occurred on average at 5.3 DAA. The average N2O emission factor (FE-N2O) was 0.51%, approximately half the standard factor proposed by the Intergovernmental Panel on Climate Change (IPCC), which is 1%. The application of nitrogen increased the maize yield in relation to the control, but the sources of nitrogen did not differ, with an average yield of 10,455 kg ha−1. Based on our findings, the use of UR-NBPT and UR-pol in subtropical agroecosystems provides environmental benefits, by reducing N2O emissions in comparison with conventional nitrogen fertilizers (CN and UR), however, the EEFs did not offer agronomic advantages in maize yield. [ABSTRACT FROM AUTHOR]

Nanofertilizer application is becoming a sustainable alternative for plants micronutrients supply. Seed nutrient priming before seeding reduces non-target dispersion; although, applying nanofertilizer in correct concentration must be narrowly chosen to prevent germination and development issues. Here, we evaluated corn seedlings development and germination after seed priming with Mn3O4 nanoparticle (NP), Mn3O4 bulk and MnCl2. Sterile seeds were soaked for 8 hours in priming solutions of 0, 20, 40, 80 and 160 mg L−1 for each Mn sources. The seeds vigor and germination were evaluated after 7 days on germination paper. Root, shoot and total lengths were measured as well as root, shoot and total dry biomass. Compared to the control, the Mn3O4 NP and Mn3O4 bulk promoted beneficial effects. Mn3O4 NP seed-priming exhibited a concentration dependent profile in improving seedling growth, with greatest benefit around 20 mg L−1, providing higher germination, vigor, dry biomass and length than control and the other source tested. Particle size plays an important role in the reactivity of Mn3O4 NP. On the other hand, seeds primed with soluble source did not differ from the control. These findings support NP-seed priming as an alternative to delivery micronutrients. [ABSTRACT FROM AUTHOR]

Nanoparticle (NP) use is becoming important alternative in different branches of science such as in agriculture, used as new source of fertiliser. In this study, it was tested iron (Fe) NP, applied as corn seed priming. In order to evaluate the early growth and development of the corn seedling a factorial experiment (5 × 3) was performed in a complete random way design with 4 replications. One of the factors were concentrations of (0, 20, 40, 80, 160 mg L−1) related to iron inside and the factor with three levels were sources (Fe3O4 NP, Fe3O4 bulk and FeCl3). 50 sterile seeds were the plot composition, which were soaked in the different Fe concentration solution containing a total volume of 200 mL for 8 h. Germination and biometric development were evaluated. Fe NPs promoted beneficial responses for seedling growth compared to other Fe sources tested here. It was realised that Fe3O4 NP concentration beneficial effects was lower compared to the other tested sources. Particle size had an important assignment in the bioavailability. The plant response reached in this research indicated iron NPs can consist efficiency for corn seed priming when applied between 50 and 70 mg L−1 concentration based on interpolation. [ABSTRACT FROM AUTHOR]