Search

Wastewater treatment plants face unique challenges for process control due to their complex dynamics, slow time constants, and stochastic delays in observations and actions. These characteristics make conventional control methods, such as Proportional-Integral-Derivative controllers, suboptimal for achieving efficient phosphorus removal, a critical component of wastewater treatment to ensure environmental sustainability. This study addresses these challenges using a novel deep reinforcement learning approach based on the Soft Actor-Critic algorithm, integrated with a custom simulator designed to model the delayed feedback inherent in wastewater treatment plants. The simulator incorporates Long Short-Term Memory networks for accurate multi-step state predictions, enabling realistic training scenarios. To account for the stochastic nature of delays, agents were trained under three delay scenarios: no delay, constant delay, and random delay. The results demonstrate that incorporating random delays into the reinforcement learning framework significantly improves phosphorus removal efficiency while reducing operational costs. Specifically, the delay-aware agent achieved 36% reduction in phosphorus emissions, 55% higher reward, 77% lower target deviation from the regulatory limit, and 9% lower total costs than traditional control methods in the simulated environment. These findings underscore the potential of reinforcement learning to overcome the limitations of conventional control strategies in wastewater treatment, providing an adaptive and cost-effective solution for phosphorus removal.

This paper presents the Dynamic Simultaneous Multi-threaded Architecture (DSMT). DSMT efficiently exe-cutes multiple threads from a single program on a SMT processor core. To accomplish this, threads are generated dynamically from a predictable flow of control and then executed speculatively. Data obtained during the single context non-speculative execution phase of DSMT is used as a hint to speculate the posterior behavior of multiple threads. DSMT employs simple mechanisms based on state bits that keep track of inter-thread dependencies in registers and memory, synchronize thread execution, and control recovery from misspeculation. Moreover, DSMT utilizes a novel greedy policy for choosing those sections of code which provide the highest performance based on their past execution history. The DSMT architecture was simulated with a new cycle-accurate, execution-driven simulator. Our simulation results show that DSMT has very good potential to improve SMT performance, even when only a single program is available. However, we found that dynamic thread behavior together with fre-quent misspeculation may also produce diminishing re-turns in performance. Therefore, the challenge is to max-imize the amount of thread-level parallelism that DSMT is capable of exploiting and at the same time reduce the fre-quency of misspeculations.

This paper introduces the Agtrup (BlueKolding) dataset, collected from Denmark's Agtrup wastewater treatment plant, specifically designed to enhance phosphorus removal via chemical and biological methods. This rich dataset is assembled through a high-frequency Supervisory Control and Data Acquisition (SCADA) system data collection process, which captures a wide range of variables related to the operational dynamics of nutrient removal. It comprises time-series data featuring measurements sampled to a frequency of two minutes across various control, process, and environmental variables. The comprehensive dataset aims to foster significant advancements in wastewater management by supporting the development of sophisticated predictive models and optimizing operational strategies. By providing detailed insights into the interactions and efficiencies of chemical and biological phosphorus removal processes, the dataset serves as a vital resource for environmental researchers and engineers focused on improving the sustainability and effectiveness of wastewater treatment operations. The ultimate goal of this dataset is to facilitate the creation of digital twins and the application of machine learning techniques, such as deep reinforcement learning, to predict and enhance system performance under varying operational conditions., Comment: Data Paper

The emergence of the microprocessor in the early 1970s allowed the design of computers that did not require the substantial economic resources of large computer companies of that era. Shortly after this event, a variety of computers based on microprocessors appeared in the United States and other developed countries. Unlike in those countries, where small and large companies developed most personal computers, in Mexico, the first microprocessor-based computers were designed within academic institutions. It is little known that Mexican computers of that era included a variety of systems ranging from purpose-specific research and teaching-oriented computers to high-performance personal computers. The goal of this article is to describe in detail some of these Mexican computers designed between the late 1970s and mid-1980s.

Even though Deep Reinforcement Learning (DRL) showed outstanding results in the fields of Robotics and Games, it is still challenging to implement it in the optimization of industrial processes like wastewater treatment. One of the challenges is the lack of a simulation environment that will represent the actual plant as accurately as possible to train DRL policies. Stochasticity and non-linearity of wastewater treatment data lead to unstable and incorrect predictions of models over long time horizons. One possible reason for the models' incorrect simulation behavior can be related to the issue of compounding error, which is the accumulation of errors throughout the simulation. The compounding error occurs because the model utilizes its predictions as inputs at each time step. The error between the actual data and the prediction accumulates as the simulation continues. We implemented two methods to improve the trained models for wastewater treatment data, which resulted in more accurate simulators: 1- Using the model's prediction data as input in the training step as a tool of correction, and 2- Change in the loss function to consider the long-term predicted shape (dynamics). The experimental results showed that implementing these methods can improve the behavior of simulators in terms of Dynamic Time Warping throughout a year up to 98% compared to the base model. These improvements demonstrate significant promise in creating simulators for biological processes that do not need pre-existing knowledge of the process but instead depend exclusively on time series data obtained from the system.

In recent years, 3D point clouds (PCs) have gained significant attention due to their diverse applications across various fields, such as computer vision (CV), condition monitoring (CM), virtual reality, robotics, autonomous driving, etc. Deep learning (DL) has proven effective in leveraging 3D PCs to address various challenges encountered in 2D vision. However, applying deep neural networks (DNNs) to process 3D PCs presents unique challenges. This paper provides an in-depth review of recent advancements in DL-based industrial CM using 3D PCs, with a specific focus on defect shape classification and segmentation within industrial applications. Recognizing the crucial role of these aspects in industrial maintenance, the paper offers insightful observations on the strengths and limitations of the reviewed DL-based PC processing methods. This knowledge synthesis aims to contribute to understanding and enhancing CM processes, particularly within the framework of remaining useful life (RUL), in industrial systems., Comment: 27 pages, 13 figures, 3 tables, review paper

Phosphorus removal is vital in wastewater treatment to reduce reliance on limited resources. Deep reinforcement learning (DRL) is a machine learning technique that can optimize complex and nonlinear systems, including the processes in wastewater treatment plants, by learning control policies through trial and error. However, applying DRL to chemical and biological processes is challenging due to the need for accurate simulators. This study trained six models to identify the phosphorus removal process and used them to create a simulator for the DRL environment. Although the models achieved high accuracy (>97%), uncertainty and incorrect prediction behavior limited their performance as simulators over longer horizons. Compounding errors in the models' predictions were identified as one of the causes of this problem. This approach for improving process control involves creating simulation environments for DRL algorithms, using data from supervisory control and data acquisition (SCADA) systems with a sufficient historical horizon without complex system modeling or parameter estimation., Comment: Journal Paper

During the last decades, a myriad of fuzzy time series models have been proposed in scientific literature. Among the most accurate models found in fuzzy time series, the high-order ones are the most accurate. The research described in this paper tackles three potential limitations associated with the application of high-order fuzzy time series models. To begin with, the adequacy of forecast rules lacks consistency. Secondly, as the model's order increases, data utilization diminishes. Thirdly, the uniformity of forecast rules proves to be highly contingent on the chosen interval partitions. To address these likely drawbacks, we introduce a novel model based on fuzzy time series that amalgamates the principles of particle swarm optimization (PSO) and weighted summation. Our results show that our approach models accurately the time series in comparison with previous methods.

Regular inspections are crucial to maintaining waste-water pipelines in good condition. The challenge is that inside a pipeline the space is narrow and may have a complex structure. The conventional methods that use pipe robots with heavy cables are expensive, time-consuming, and difficult to operate. In this work, we develop an amphibious system that combines a quad-copter with a surface vehicle, creating a hybrid unmanned aerial floating vehicle (HUAFV). Nonlinear dynamics of the HUAFV are modeled based on the dynamic models of both operating modes. The model is validated through experiments and simulations. A PI controller designed and tuned on the developed model is implemented onto a prototype platform. Our experiments demonstrate the effectiveness of the new HUAFV's modeling and design.