Search

High-resolution peripheral quantitative computed tomography (HR-pQCT) is a powerful tool to assess bone health. To determine how an individual's or population of interest's HR-pQCT outcomes compare to expected, reference data are required. This study provides reference data for HR-pQCT measures acquired in a population of White adults.PURPOSE: To provide age- and sex-specific reference data for high-resolution peripheral quantitative computed tomography (HR-pQCT) measures of the distal and diaphyseal radius and tibia acquired using a second-generation scanner and percent-of-length offsets proximal from the end of the bone.METHODS: Data were acquired in White adults (aged 18-80 years) living in the Midwest region of the USA. HR-pQCT scans were performed at the 4% distal radius, 30% diaphyseal radius, 7.3% distal tibia, and 30% diaphyseal tibia. Centile curves were fit to the data using the LMS approach.RESULTS: Scans of 867 females and 317 males were included. The fitted centile curves reveal HR-pQCT differences between ages, sexes, and sites. They also indicate differences when compared to data obtained by others using fixed length offsets. Excel-based calculators based on the current data were developed and are provided to enable computation of subject-specific percentiles, z-scores, and t-scores and to plot an individual's outcomes on the fitted curves. In addition, regression equations are provided to convert estimated failure load acquired with the conventional criteria utilized with first-generation scanners and those specifically developed for second-generation scanners.CONCLUSION: The current study provides unique data and resources. The combination of the reference data and calculators provide clinicians and investigators an ability to assess HR-pQCT outcomes in an individual or population of interest, when using the described scanning and analysis procedure. Ultimately, the expectation is these data will be expanded over time

Vitamin D is an important factor in bone metabolism. Animal studies have shown a positive effect of vitamin D3 supplementation on fracture healing, but evidence from clinical trials is inconclusive. A randomized controlled trial was performed to assess the effect of vitamin D3 supplementation on fracture healing using high-resolution peripheral quantitative computed tomography (HR-pQCT) based outcome parameters. Thirty-two postmenopausal women with a conservatively treated distal radius fracture were included within two weeks post-fracture and randomized to a low-dose (N = 10) and a high-dose (N = 11) vitamin D intervention group receiving a 6-week bolus dose, equivalent to 700 and 1,800 IU vitamin D3 supplementation per day respectively, in addition to a control group (N = 11) receiving no supplementation. After the baseline visit 1-2 weeks post-fracture, follow-up visits were scheduled at 3-4, 6-8 and 12 weeks post-fracture. At each visit, HR-pQCT scans of the fractured radius were performed. Cortical and trabecular bone density and microarchitectural parameters and μFEA derived torsion, compression and bending stiffness were assessed. Additionally, serum markers of bone resorption (C-terminal telopeptide of type I collagen; CTX) and bone formation (N-terminal propeptide of type I procollagen; PINP) were measured. Baseline serum levels of 25(OH)D3 were < 50 nmol/L in 33% of all participants and < 75 nmol/L in 70%. Compared to the control group, high-dose vitamin D3 supplementation resulted in a decreased trabecular number (regression coefficient B: -0.22; p < 0.01) and lower compression stiffness (B: -3.63; p < 0.05, together with an increase in the bone resorption marker CTX (B: 0.062; p < 0.05). No statistically significant differences were observed between the control and low-dose intervention group. In conclusion, the bolus equivalent of 700 U/day vitamin D3 supplementation in a Western postmenopausal population does not improve distal radius

In recent decades, an increasing number of tissue engineered bone grafts have been developed. However, expensive and laborious screenings in vivo are necessary to assess the safety and efficacy of their formulations. Rodents are the first choice for initial in vivo screens but their size limits the dimensions and number of the bone grafts that can be tested in orthotopic locations. Here, we report the development of a refined murine subcutaneous model for semi-orthotopic bone formation that allows the testing of up to four grafts per mouse one order of magnitude greater in volume than currently possible in mice. Crucially, these defects are also "critical size" and unable to heal within the timeframe of the study without intervention. The model is based on four bovine bone implants, ring-shaped, where the bone healing potential of distinct grafts can be evaluated in vivo. In this study we demonstrate that promotion and prevention of ossification can be assessed in our model. For this, we used a semi-automatic algorithm for longitudinal micro-CT image registration followed by histological analyses. Taken together, our data supports that this model is suitable as a platform for the real-time screening of bone formation, and provides the possibility to study bone resorption, osseointegration and vascularisation., Biomaterials & Tissue Biomechanics

INTRODUCTION: The aim of this study was to investigate the associations of patient characteristics, bone mineral density (BMD), bone microarchitecture and calculated bone strength with secondary displacement of a DRF based on radiographic alignment parameters.MATERIALS AND METHODS: Dorsal angulation, radial inclination and ulnar variance were assessed on conventional radiographs of a cohort of 251 patients, 38 men and 213 women, to determine the anatomic position of the DRF at presentation (primary position) and during follow-up. Secondary fracture displacement was assessed in the non-operatively treated patients (N = 154) with an acceptable position, preceded (N = 97) or not preceded (N = 57) by primary reduction (baseline position). Additionally, bone microarchitecture and calculated bone strength at the contralateral distal radius and tibia were assessed by HR-pQCT in a subset of, respectively, 63 and 71 patients.OUTCOME: Characteristics of patients with and without secondary fracture displacement did not differ. In the model with adjustment for primary reduction [OR 22.00 (2.27-212.86), p = 0.008], total [OR 0.16 (95% CI 0.04-0.68), p = 0.013] and cortical [OR 0.19 (95% CI 0.05-0.80], p = 0.024] volumetric BMD (vBMD) and cortical thickness [OR 0.13 (95% CI 0.02-0.74), p = 0.021] at the distal radius were associated with secondary DRF displacement. No associations were found for other patient characteristics, such as age gender, BMD or prevalent vertebral fractures.CONCLUSIONS: In conclusion, our study indicates that besides primary reduction, cortical bone quality may be important for the risk of secondary displacement of DRFs.

OBJECTIVE Complications after adult spinal deformity surgery are common, with implant-related complications occurring in up to 27.8% of cases. Sublaminar wire fixation strength is less affected by decreasing trabecular bone density in comparison to pedicle screw (PS) fixation due to the predominant cortical bone composition of the lamina. Sublaminar fixation may thus aid in decreasing implant-related complications. The goal of this study was to compare fixation characteristics of titanium sublaminar cables (SCs), ultra-high-molecular-weight polyethylene (UHMWPE) tape, PSs, and PSs augmented with UHMWPE tape in an ex vivo flexion-bending setup.METHODS Thirty-six human cadaver vertebrae were stratified into 4 different fixation groups: UHMWPE sublaminar tape (ST), PS, metal SC, and PS augmented with ST (PS + ST). Individual vertebrae were embedded in resin, and a flexion-bending moment was applied that closely resembles the in vivo loading pattern at transitional levels of spinal instrumentation.RESULTS The failure strength of PS + ST (4522 +/- 2314 N) was significantly higher compared to the SC (2931 +/- 751 N) and PS (2678 +/- 827 N) groups, which had p values of 0.028 and 0.015, respectively (all values expressed as the mean +/- SD). Construct stiffness was significantly higher for the PS groups compared to the stand-alone sublaminar wiring groups (p = 0.020). In contrast to SC, ST did not show any case of cortical breach.CONCLUSIONS The higher failure strength of PS + ST compared to PS indicates that PS augmentation with ST may be an effective measure to reduce the incidence of screw pullout, even in osteoporotic vertebrae. Moreover, the lower stiffness of sublaminar fixation techniques and the absence of damage to the cortices in the ST group suggest that ST as a stand-alone fixation technique in adult spinal deformity surgery may also be clinically feasible and offer clinical benefits.