Search

In this study, a series of four surface-active compounds- N -alkyl betaine ethyl ester chlorides, C n BetC 2 Cl-were synthesized and characterized in aqueous solutions. As with other alkyl betaines, these amphiphiles can be practically used, for example, as co-surfactants and/or solubility enhancers acting according to hydrotropic or micellar mechanisms, depending on the alkyl chain length in the amine. We focused on the representatives of the medium alkyl chain length (C 6 -C 12 ) to find the dependence between the alkyl chain length in N -alkyl betaine ethyl ester chlorides and the surface, volumetric, acoustic, and viscometric properties of their solutions. Ethyl esters, the derivatives of amino acids, were chosen to increase functionality and take advantage of possible hydrolysis in solutions at higher pH, which is also a key parameter in biodegradability. The micellization parameters were calculated based on the physicochemical characteristics. We focused our interest on the ester with a dodecyl substituent since we can compare and discuss its properties with some other C 12 representatives that are available in literature. Surprisingly, its micellization characteristic is almost temperature-independent in the investigated temperature range, t = (15-45) °C. Particularly interesting are the results of dynamic light scattering (DLS), which show that the changes in physicochemical parameters of the C 12 homolog around the CMC are caused by the two types of micelles of different sizes present in solutions.

Currently, the fundamental activity that will allow for the development of an economy with closed circulation is the management of food waste and production waste for the preparation of biocomposites. The use of waste materials of natural origin allows for the creation of innovative composites with improved physicochemical and functional properties. The present investigation concerns the use of coffee grounds (2.5-20 wt.%) and oak sawdust (2.5-20 wt.%) as effective fillers of rigid polyurethane foam. Innovative composite materials, previously indebted in the literature, were subjected to the necessary analyses to determine the application abilities: processing times, free density, water absorption, dimensional stability, mechanical properties (compressive strength), thermal conductivity, morphology, and flame resistance. The results with respect to the mechanical tests turned out to be the key. Increasing the number of coffee additives has a positive effect on the compressive strength. The addition of this filler in the range of 5-15 wt.% increased the compressive strength of the composites, 136-139 kPa, compared to the reference sample, 127 kPa. The key parameter analysed was thermal conductivity. The results obtained were in range of the requirements, that is, 0.022-0.024 W/m·K for all used amounts of fillers 2.5-20 wt.%. This is extremely important since these materials are used for insulation purposes. The results of the burning-behaviour test have confirmed that the addition of renewable materials does not negatively affect the fire resistance of the received foams; the results were obtained analogously to those obtained from the reference sample without the addition of fillers. The height of the flame did not exceed 17 cm, while the flame decay time was 17 s for the reference sample and the composite with coffee grounds and 18 s for the composite with oak sawdust. In this work, the practical application of bioorganic waste as an innovative filler for the insulation of flooded polyurethane foam is described for the first time. The introduction of fillers of natural origin into the polymer matrix is a promising method to improve the physicochemical and functional properties of rigid polyurethane foams. Composites modified with coffee grounds and sawdust are interesting from a technological, ecological, and economic point of view, significantly increasing the range of use of foam in various industries.

A novel chitin-ethylene glycol hybrid gel was prepared as a hydrogel electrolyte for electrical double-layer capacitors (EDLCs) using 1-butyl-3-methylimidazolium acetate [Bmim][Ac] as a chitin solvent. Examination of the morphology and topography of the chitin-EG membrane showed a homogeneous and smooth surface, while the thickness of the membrane obtained was 27 µm. The electrochemical performance of the chitin-EG hydrogel electrolyte was investigated by cyclic voltammetry and galvanostatic charge/discharge measurements. The specific capacitance value of the EDLC with chitin-EG hydrogel electrolyte was found to be 109 F g -1 in a potential range from 0 to 0.8 V. The tested hydrogel material was electrochemically stable and did not decompose even after 10,000 GCD cycles. Additionally, the EDLC test cell with chitin-EG hydrogel as electrolyte exhibited superior capacitance retention after 10,000 charge/discharge cycles compared with a commercial glass fiber membrane., (© 2022. The Author(s).)

In this paper, native cellulose I was subjected to alkaline treatment. As a result, cellulose I was transformed to cellulose II and some nanometric particles were formed. Both polymorphic forms of cellulose were modified with poly(ethylene glycol) (PEG) and then used as fillers for polyurethane. Composites were prepared in a one-step process. Cellulosic fillers were characterized in terms of their chemical (Fourier transformation infrared spectroscopy) and supermolecular structure (X-ray diffraction), as well as their particle size. Investigation of composite polyurethane included measurements of density, characteristic processing times of foam formation, compression strength, dimensional stability, water absorption, and thermal conductivity. Much focus was put on the application aspect of the produced insulation polyurethane foams. It was shown that modification of cellulosic filler with poly(ethylene glycol) has a positive influence on formation of polyurethane composites-if modified filler was used, the values of compression strength and density increased, while water sorption and thermal conductivity decreased. Moreover, it was proven that the introduction of cellulosic fillers into the polyurethane matrix does not deteriorate the strength or thermal properties of the foams, and that composites with such fillers have good application potential.

Background: Distinct tissue types are differentiated based on the surgeon's knowledge and subjective visible information, typically assisted with white-light intraoperative imaging systems. Narrow-band imaging (NBI) assists in tissue identification and enables automated classifiers, but many anatomical details moderate computational predictions and cause bias. In particular, tissues' light-source-dependent optical characteristics, anatomical location, and potentially hazardous microstructural changes such as peeling have been overlooked in previous literature., Methods: Narrow-band images of five ( n = 5) facial nerves (FNs) and internal carotid arteries (ICAs) were captured from freshly frozen temporal bones. The FNs were split into intracranial and intratemporal samples, and ICAs' adventitia was peeled from the distal end. Three-dimensional (3D) spectral data were captured by a custom-built liquid crystal tunable filter (LCTF) spectral imaging (SI) system. We investigated the normal variance between the samples and utilized descriptive and machine learning analysis on the image stack hypercubes., Results: Reflectance between intact and peeled arteries in lower-wavelength domains between 400 and 576 nm was significantly different ( p < 0.05). Proximal FN could be differentiated from distal FN in a higher range, 490-720 nm ( p < 0.001). ICA with intact tunica differed from proximal FN nearly thorough the VIS range, 412-592 nm ( p < 0.001) and 664-720 nm ( p < 0.05) as did its distal counterpart, 422-720 nm ( p < 0.001). The availed U-Net algorithm classified 90.93% of the pixels correctly in comparison to tissue margins delineated by a specialist., Conclusion: Selective NBI represents a promising method for assisting tissue identification and computational segmentation of surgical microanatomy. Further multidisciplinary research is required for its clinical applications and intraoperative integration., (Copyright © 2020 Puustinen, Alaoui, Bartczak, Bednarik, Koivisto, Dietz, von und zu Fraunberg, Iso-Mustajärvi and Elomaa.)

The classical stoichiometric oxidation of alcohols is an important tool in contemporary organic chemistry. However, it still requires huge modifications in order to comply with the principles of green chemistry. The use of toxic chemicals, hazardous organic solvents, and the large amounts of toxic wastes that result from the reactions are a few examples of the problems that must be solved. Nanogold alone or conjugated with palladium were supported on different carriers (SiO₂, C) and investigated in order to evaluate their catalytic potential for environmentally friendly alcohol oxidation under solvent-free and base-free conditions in the presence H₂O₂ as a clean oxidant. We tested different levels of Au loading (0.1⁻1.2% wt.) and different active catalytic site forms (monometallic Au or bimetallic Au⁻Pd sites). This provided new insights on how the structure of the Au-dispersions affected their catalytic performance. Importantly, the examination of the catalytic performance of the resulting catalysts was oriented toward a broad scope of alcohols, including those that are the most resistant to oxidation-the primary aliphatic alcohols. Surprisingly, the studies proved that Au/SiO₂ at a level of Au loading as low as 0.1% wt. appeared to be efficient and prospective catalytic system for the green oxidation of alcohol. Most importantly, the results revealed that 0.1% Au/SiO₂ might be the catalyst of choice with a wide scope of utility in the green oxidation of various structurally different alcohols as well as the non-activated aliphatic ones.

Electrolytic copper is a well-known form of pure, oxygen free copper that is used for industrial applications. In this work, the catalytic potential of this relatively cheap material was studied. The addition of less than 0.015 mol equivalent of copper powder effectively catalysed the one-pot synthesis of triazoles from a diverse range of organic halides and alkynes. Quantitative conversions in aqueous solvents can be achieved within minutes. The heterogenous nature of the catalyst afforded a low level of copper contamination in the products, thus meeting the rigorous criteria of the pharmaceutical industry.

The use of chitin modified with kraft lignin as an effective sorbent of ibuprofen and acetaminophen is described for the first time. It was determined how the parameters (contact time, pH, mass of sorbent and temperature) influence the effectiveness of the adsorption process. The adsorption kinetics were calculated using pseudo-first-order, pseudo-second-order (types 1-4) and intra-particle diffusion models, and thermodynamic parameters were determined. The experimental data better correspond to a pseudo-second-order kinetic model of type 1 in the case of both tested pharmaceuticals (r 2 =0.999). The negative values of ΔH° show the adsorption to be exothermic (-5.515kJ/mol and -5.161kJ/mol for ibuprofen and acetaminophen respectively). Adsorption isotherms, using Langmuir isotherms of types 1-4 and Freundlich model, were also determined. The experimental data better correspond to the Langmuir type 1 model in the case of ibuprofen, and to the Freundlich model in the case of acetaminophen. Desorption tests were carried out to confirm the possibility of reusing the chitin/lignin system. A mechanism of adsorption of ibuprofen and acetaminophen on the chitin/lignin system was also proposed., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A comparative analysis was performed concerning the removal of two different organic dyes from model aqueous solution using an inorganic oxide adsorbent. The key element of the study concerns evaluation of the influence of the dyes' structure and their acid-base character on the efficiency of the adsorption process. The selection of sorbent material for this research - an MgO-SiO 2 oxide system synthesized via a modified sol-gel route - is also not without significance. The relatively high porous structure parameters of this material (A BET  = 642 m 2 /g, V p  = 1.11 mL and S p  = 9.8 nm) are a result of the proposed methodology for its synthesis. Both organic dyes (C.I. Acid Blue 29 and C.I. Basic Blue 9) were subjected to typical batch adsorption tests, including investigation of such process parameters as time, initial adsorbate concentration, adsorbent dose, pH and temperature. An attempt was also made to estimate the sorption capacity of the oxide material with respect to the analyzed organic dyes. To achieve the objectives of the research - determine the efficiency of adsorption - it was important to perform a thorough physicochemical analysis of the adsorbents (e.g. FTIR, elemental analysis and porous structure parameters). The results confirmed the significantly higher affinity of the basic dye to the oxide adsorbents compared with the acidic dye. The regeneration tests, which indirectly determine the nature of the adsorbent/adsorbate interactions, provide further evidence for this finding. On this basis, a probable mechanism of dyes adsorption on the MgO-SiO 2 oxide adsorbent was proposed., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

A chitin/lignin material with defined physicochemical and morphological properties was used as an effective adsorbent of environmentally toxic metals from model systems. Particularly significant is its use in the neutralization of real industrial wastes. The ions Ni 2+ , Cu 2+ , Zn 2+ and Pb 2+ were adsorbed on the functional sorbent, confirming the high sorption capacity of the newly obtained product, primarily due to the presence on its surface of numerous active functional groups from the component biopolymers. The kinetics of the process of ion adsorption from model solution were investigated, and the experimental data were found to fit significantly better to a type 1 pseudo-second-order kinetic model, as confirmed by the high correlation coefficient of 0.999 for adsorption of both nickel(II) copper(II) zinc(II) and lead(II) ions. The experimental data obtained on the basis of adsorption isotherms corresponded to the Langmuir model. The sorption capacity of the chitin/lignin material was measured at 70.41 mg(Ni 2+ )/g, 75.70 mg(Cu 2+ )/g, 82.41 mg(Zn 2+ )/g and 91.74 mg(Pb 2+ )/g. Analysis of thermodynamic parameters confirmed the endothermic nature of the process. It was also shown that nitric acid is a very effective desorbing (regenerating) agent, enabling the chitin/lignin material to be reused as an effective sorbent of metal ions. The sorption abilities of the chitin/lignin system with respect to particular metal ions can be ordered in the sequence Ni 2+ 2+ 2+ 2+ . Tests were also performed with the adsorption of ions of nickel(II), copper(II), zinc(II) and lead(II) from wastewater obtained from galvanization and battery production plants, confirming the ability of the chitin/lignin sorbent to adsorb harmful ions from real industrial wastes., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Haumea-one of the four known trans-Neptunian dwarf planets-is a very elongated and rapidly rotating body. In contrast to other dwarf planets, its size, shape, albedo and density are not well constrained. The Centaur Chariklo was the first body other than a giant planet known to have a ring system, and the Centaur Chiron was later found to possess something similar to Chariklo's rings. Here we report observations from multiple Earth-based observatories of Haumea passing in front of a distant star (a multi-chord stellar occultation). Secondary events observed around the main body of Haumea are consistent with the presence of a ring with an opacity of 0.5, width of 70 kilometres and radius of about 2,287 kilometres. The ring is coplanar with both Haumea's equator and the orbit of its satellite Hi'iaka. The radius of the ring places it close to the 3:1 mean-motion resonance with Haumea's spin period-that is, Haumea rotates three times on its axis in the time that a ring particle completes one revolution. The occultation by the main body provides an instantaneous elliptical projected shape with axes of about 1,704 kilometres and 1,138 kilometres. Combined with rotational light curves, the occultation constrains the three-dimensional orientation of Haumea and its triaxial shape, which is inconsistent with a homogeneous body in hydrostatic equilibrium. Haumea's largest axis is at least 2,322 kilometres, larger than previously thought, implying an upper limit for its density of 1,885 kilograms per cubic metre and a geometric albedo of 0.51, both smaller than previous estimates. In addition, this estimate of the density of Haumea is closer to that of Pluto than are previous estimates, in line with expectations. No global nitrogen- or methane-dominated atmosphere was detected.

A new biomaterial based on chitin and lignin was prepared and applied for the removal of hazardous dye C.I. Direct Blue 71 (DB71) from aqueous solutions and wastewaters. The dye sorption on the chitin/lignin biosorbent (Ch/L) was examined depending on the initial dye concentration (50-200mg/L), phase contact time (1-1440min), kind of auxiliaries (NaCl, Na 2 SO 4 , anionic surfactant SDS) and their concentrations (1-20g/L salts, 0.1-0.75g/L SDS), initial solution pH as well as temperature (20-50°C). The equilibrium and kinetic characteristics of C.I. Direct Blue 71 uptake by chitin/lignin followed by the Freundlich isotherm model and the pseudo-second order model rather than the Langmuir, Tempkin models, and pseudo-first order model. C.I. Direct Blue 71 adsorption on chitin/lignin was spontaneous (-2.86 to -8.14kJ/mol) and endothermic (60.1kJ/mol). The possibilities of dye elution and reuse by means of the batch method were investigated and as follows the chemical reaction is an inseparable sorption mechanism. Purification of wastewaters containing direct dyes was made with 91% efficiency after 1h of phase contact time. For comparison, data obtained or obtained results in the DB71-chitin (Ch) system were also presented., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A study was made concerning the removal of copper(II) ions from model and galvanic waste solutions using a new sorption material consisting of lignin in combination with an inorganic oxide system. Specific physicochemical properties of the material resulted from combining the activity of the functional groups present in the structure of lignin with the high surface area of the synthesized oxide system (585m 2 /g). Analysis of the porous structure parameters, particle size and morphology, elemental composition and characteristic functional groups confirmed the effective synthesis of the new type of sorbent. A key element of the study was a series of tests of adsorption of copper(II) ions from model solutions. It was determined how the efficiency of the adsorption process was affected by the process time, mass of sorbent, concentration of adsorbate, pH and temperature. Potential regeneration of adsorbent, which provides the possibility of its reusing and recovering the adsorbed copper, was also analyzed. The sorption capacity of the material was measured (83.98mg/g), and the entire process was described using appropriate kinetic models. The results were applied to the design of a further series of adsorption tests, carried out on solutions of real sewage from a galvanizing plant., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In this study, Hippospongia communis marine demosponge skeleton was used as an adsorbent for sodium copper chlorophyllin (SCC). Obtained results indicate the high sorption capacity of this biomaterial with respect to SCC. Batch experiments were performed under different conditions and kinetic and isotherms properties were investigated. Acidic pH and the addition of sodium chloride increased SCC adsorption. The experimental data were well described by a pseudo-second order kinetic model. Equilibrium adsorption isotherms were determined and the experimental data were analyzed using both Langmuir and Freundlich isotherms. The effectiveness of the process was confirmed by 13 C Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance ( 13 C CP/MAS NMR), Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS) and thermogravimetric analysis (TG). This novel SCC-sponge-based functional hybrid material was found to exhibit antimicrobial activity against the gram-positive bacterium Staphylococcus aureus ., Competing Interests: The authors declare no conflict of interest.

In this study, we investigated different metal pairings of Au nanoparticles (NPs) as potential catalysts for glycerol dehydration for the first time. All of the systems preferred the formation of hydroxyacetone (HYNE). Although the bimetallics that were tested, i.e., Au NPs supported on Ni, Fe and Cu appeared to be more active than the Au/SiO2 system, only Cu supported Au NPs gave high conversion (ca. 63%) and selectivity (ca. 70%) to HYNE.

In this paper we report a new nanometallic, self-activating catalyst, namely, Ni-supported Pd nanoparticles (PdNPs/Ni) for low temperature ammonia cracking, which was prepared using a novel approach involving the transfer of nanoparticles from the intermediate carrier, i.e. nano-spherical SiO2, to the target carrier technical grade Ni (t-Ni) or high purity Ni (p-Ni) grains. The method that was developed allows a uniform nanoparticle size distribution (4,4±0.8 nm) to be obtained. Unexpectedly, the t-Ni-supported Pd NPs, which seemed to have a surface Ca impurity, appeared to be more active than the Ca-free (p-Ni) system. A comparison of the novel PdNPs/Ni catalyst with these reported in the literature clearly indicates the much better hydrogen productivity of the new system, which seems to be a highly efficient, flexible and durable catalyst for gas-phase heterogeneous ammonia cracking in which the TOF reaches a value of 2615 mmolH2/gPd min (10,570 molNH3/molPd(NP) h) at 600°C under a flow of 12 dm3/h (t-Ni).

New styrylquinoline derivatives with their photophysical constants are described. The synthesis was achieved via Sonogashira coupling using the newly developed heterogeneous nano-Pd/Cu catalyst system, which provides an efficient synthesis of high purity products. The compounds were tested in preliminary fluorescent microscopy studies to in order to identify their preferable cellular localization, which appeared to be in the lipid cellular organelles. The spectroscopic properties of the compounds were measured and theoretical TD-DFT calculations were performed. A biological analysis of the quinolines that were tested consisted of cytotoxicity assays against normal human fibroblasts and colon adenocarcinoma cells. All of the compounds that were studied appeared to be safe and indifferent to cells in a high concentration range. The presented results suggest that the quinoline compounds that were investigated in this study may be valuable structures for development as fluorescent dyes that could have biological applications.

C.I. Natural Red 4 dye, also known as carmine or cochineal, was adsorbed onto the surface of spongin-based fibrous skeleton of Hippospongia communis marine demosponge for the first time. The influence of the initial concentration of dye, the contact time, and the pH of the solution on the adsorption process was investigated. The results presented here confirm the effectiveness of the proposed method for developing a novel dye/biopolymer hybrid material. The kinetics of the adsorption of carmine onto a marine sponge were also determined. The experimental data correspond directly to a pseudo-second-order model for adsorption kinetics ( r ² = 0.979-0.999). The hybrid product was subjected to various types of analysis (FT-IR, Raman, 13 C CP/MAS NMR, XPS) to investigate the nature of the interactions between the spongin (adsorbent) and the dye (the adsorbate). The dominant interactions between the dye and spongin were found to be hydrogen bonds and electrostatic effects. Combining the dye with a spongin support resulted with a novel hybrid material that is potentially attractive for bioactive applications and drug delivery systems.

Novel, functional materials based on chitin of marine origin and lignin were prepared. The synthesized materials were subjected to physicochemical, dispersive-morphological and electrokinetic analysis. The results confirm the effectiveness of the proposed method of synthesis of functional chitin/lignin materials. Mechanism of chitin modification by lignin is based on formation of hydrogen bonds between chitin and lignin. Additionally, the chitin/lignin materials were studied from the perspective of waste water treatment. The synthetic method presented in this work shows an attractive and facile route for producing low-cost chitin/lignin biosorbents with high efficiency of nickel and cadmium adsorption (88.0% and 98.4%, respectively). The discovery of this facile method of synthesis of functional chitin/lignin materials will also have a significant impact on the problematic issue of the utilization of chitinous waste from the seafood industry, as well as lignin by-products from the pulp and paper industry.

CCD photometric observations of the near-Earth asteroid 2012 QG42 were made by a collaboration of observers in the U.S. and Europe. The asteroid was found to be a slow rotator, having a synodic period of 24.22 ± 0.01 h based on a data set spanning nearly two weeks. The amplitude of the lightcurve was 1.18 ± 0.03 mag.

Purpose: In our research we investigated immunohistochemical expression of cell cycle proteins protein p21, cyclin D1 and cyclin E in physiological endometrium (n = 15), hyperplastic endometrium (n = 61), and post hormone replacement therapy endometrium (n = 24)., Material and Methods: We performed immunohistochemical analysis of selected cell cycle proteins in 100 specimens of human endometrium., Results: The average immunoexpression index scores in glandular endometrial cells (GES) and stromal endometrial cells (SEC) were respectively: for p21- GES: 11.8 +/- 17.19%; SEC: 9.31 +/- 17.15%; for cyclin D1- GES: 9.25 +/- 18.41%; SEC: 3.22 +/- 11.46%; for cyclin E: GES: 26.42 +/- 27.47%; SEC: 4.61 +/- 7.90%. Statistical analysis disclosed more intense p21 glandular immunoreactivity among women with endometrial hyperplasia in comparison to other subpopulations. In the case of assessment of cyclin D1 immunoreactivity, there was no statistical correlation between analysed parameters. The average cyclin E immunoreactivity in endometrial glandular cells was significantly higher (p = 0.003) in women with endometrial hyperplasia and correlated with age., Conclusions: Intensive immunoreactivity of cyclin E in glandular cells is typical for endometrial hyperplasia and can be treated as an objective indicator of this pathological process during histopathological diagnostic procedures. Immunoreactivity index of p21 and cyclin D1 is independent of the morphological pattern of human endometrium, patients' age and gynaecological history of patients.

Unlabelled: In our study we investigated immunohistochemical expression of retinoblastoma protein (pRb) in physiological endometrium (n = 15), hyperplastic endometrium (n = 61) and post-hormone replacement therapy (HRT) endometrium (n = 24)., Methods: We performed an immunohistochemical analysis of pRb expression in 100 specimens of human endometrium., Results: The average pRb immunoexpression index score in glandular endometrial cells and stromal endometrial cells were 57,699 and 21,191 respectively. The less intense pRb immunostaining for the glandular cells was displayed in women over 49 years old. The most intense staining effect of glandular cells was observed among patients with physiological endometrium, no older than 49 years of life. There was no statistically significant correlation between the obtained pRb immunoexpression and clinical data of the examined patients., Conclusions: We conclude that immunohistochemistry is not sensitive and specific enough to reveal pRb alterations resulting in endometrium pathologies. Alternatively, pathological rearrangements of endometrium may be independent from the accuracy of the pRb control over restriction point in cell-cycle pathway.