Search

Metal chalcogenides are primarily used for thermoelectric applications due to their enormous potential to convert waste heat into valuable energy. Several studies focused on single or dual aliovalent doping techniques to enhance thermoelectric properties in semiconductor materials; however, these dopants enhance one property while deteriorating others due to the interdependency of these properties or may render the host material toxic. Therefore, a strategic doping approach is vital to harness the full potential of doping to improve the efficiency of thermoelectric generation while restoring the base material eco-friendly. Here, we report a well-designed counter-doped eco-friendly nanomaterial system (~70 nm) using both isovalent (cerium) and aliovalent (cobalt) in a Bi 2 Se 3 system for enhancing energy conversion efficiency. Substituting cerium for bismuth simultaneously enhances the Seebeck coefficient and electrical conductivity via ionized impurity minimization. The boost in the average electronegativity offered by the self-doped transitional metal cobalt leads to an improvement in the degree of delocalization of the valence electrons. Hence, the new energy state around the Fermi energy serving as electron feed to the conduction band coherently improves the density of the state of conducting electrons. The resulting high power factor and low thermal conductivity contributed to the remarkable improvement in the figure of merit (zT = 0.55) at 473 K for an optimized doping concentration of 0.01 at. %. sample, and a significant nanoparticle size reduction from 400 nm to ~70 nm, making the highly performing materials in this study (Bi2-xCexCo2x3Se3) an excellent thermoelectric generator. The results presented here are higher than several Bi 2 Se 3 -based materials already reported.

Recently, surging interests exist in direct electrochemical ammonia (NH 3 ) synthesis from nitric oxide (NO) due to the dual benefit of NH 3 synthesis and NO removal. However, designing highly efficient catalysts is still challenging. Based on density functional theory, the best ten candidates of transition-metal atoms (TMs) embedded in phosphorus carbide (PC) monolayer is screened out as highly active catalysts for direct NO-to-NH 3 electroreduction. The employment of machine learning-aided theoretical calculations helps to identify the critical role of TM-d orbitals in regulating NO activation. A V-shape tuning rule of TM-d orbitals for the Gibbs free energy change of NO or limiting potentials is further revealed as the design principle of TM embedded PC (TM-PC) for NO-to-NH 3 electroreduction. Moreover, after employing effective screening strategies including surface stability, selectivity, the kinetic barrier of potential-determining step, and thermal stability comprehensively studied for the ten TM-PC candidates, only Pt embedded PC monolayer has been identified as the most promising direct NO-to-NH 3 electroreduction with high feasibility and catalytic performance. This work not only offers a promising catalyst but also sheds light on the active origin and design principle of PC-based single-atom catalysts for NO-to-NH 3 conversion., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: Data on the value of magnetic resonance imaging (MRI) in the preoperative evaluation and surgery planning of gynecomastia are limited. The purpose of this study is to reveal MRI features and categories of gynecomastia and compare surgical outcomes following MRI and sonography as well as their diagnostic accuracy., Methods: The area of the gland and the whole breast on the transverse plane via nipple of MRI were measured to calculate the ratio between them. Areola, mass and branch patterns were categorized to represent three different gynecomastia type on MRI. 183 patients were included, with 38 in MRI group and 145 in sonography group. Diagnostic accuracy was assessed by the level of agreement between preoperative imaging findings and intraoperative observations. Surgical data, patients' satisfaction and complications were compared between the two groups., Results: MRI in 75 gynecomastic breasts demonstrated the average ratio of the gland to the whole breast was 10.6%±13.3%. The most common MRI categories were branch patterns (45.3%). The diagnostic concordance rate of MRI was higher than sonography (100% vs. 86.8%, p = 0.001). Among those junior surgeons, the length of surgery was reduced in MRI group (100 min vs. 115 min, p = 0.048). There was no difference in terms of patient's satisfaction and complication rate between MRI and sonography., Conclusion: MRI was superior to sonography in diagnostic accuracy to assess the tissue components of gynecomastia and provided informative guidance especially for junior surgeons. Surgical outcomes were comparable regardless of the use of MRI or sonography for evaluation., Level of Evidence Iv: IThis journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 ., (© 2023. Springer Science+Business Media, LLC, part of Springer Nature and International Society of Aesthetic Plastic Surgery.)

The second-largest transcription factor superfamily in plants is that of the basic helix-loop-helix (bHLH) family, which plays an important complex physiological role in plant growth, tissue development, and environmental adaptation. Systematic research on the Chenopodium quinoa bHLH family will enable a better understanding of this species. Herein, authors used a variety of bioinformatics methods and quantitative Real-Time Polymerase Chain Reaction (qRT-PCR) to explore the evolution and function of the 218 CqbHLH genes identified. A total of 218 CqbHLH transcription factor genes were identified in the whole genome, located on 18 chromosomes. A phylogenetic tree was constructed using the CqbHLH and AtbHLH proteins to determine their homology, and the members were divided into 20 subgroups and one unclustered gene. Authors also analyzed 218 CqbHLH genes, conservative motifs, chromosome diffusion, and gene replication. The author constructed one Neighbor-Joining (NJ) tree and a collinearity analysis map of the bHLH family in C. quinoa and six other plant species to study the evolutionary relationship and homology among multiple species. In addition, the expression levels of 20 CqbHLH members from different subgroups in various tissues, different fruit developmental stages, and six abiotic stresses were analyzed. Authors identified 218 CqbHLH genes and studied their biological functions, providing a basis for better understanding and further studying the bHLH family in quinoa., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Xue, Fan, Zheng, Yang, Feng, Chen, Yang, Yao, Weng, Kong, Liu, Cheng and Ruan.)

High entropy oxide nanoparticles (HEO NPs) with multiple component elements possess improved stability and multiple uses for functional applications, including catalysis, data memory, and energy storage. However, the synthesis of homogenous HEO NPs containing five or more immiscible elements with a single-phase structure is still a great challenge due to the strict synthetic conditions. In particular, several synthesis methods of HEO NPs require extremely high temperatures. In this study, we demonstrate a low cost, facile, and effective method to synthesize three- to eight-element HEO nanoparticles by a combination of electrospinning and low-temperature ambient annealing. HEO NPs were generated by annealing nanofibers at 330 °C for 30 minutes under air conditions. The average size of the HEO nanoparticles was ∼30 nm and homogenous element distribution was obtained from post-electrospinning thermal decomposition. The synthesized HEO NPs exhibited magnetic properties with the highest saturation magnetization at 9.588 emu g -1 and the highest coercivity at 147.175 Oe for HEO NPs with four magnetic elements while integrating more nonmagnetic elements will suppress the magnetic response. This electrospun and low-temperature annealing method provides an easy and flexible design for nanoparticle composition and economic processing pathway, which offers a cost- and energy-effective, and high throughput entropy nanoparticle synthesis on a large scale., Competing Interests: The authors declare no competing financial interests., (This journal is © The Royal Society of Chemistry.)

Vitamin D plays a significant role in the physiological functions of the human body. However, the application of vitamin D in functional foods is limited due to its sensitivity to light and oxygen. Therefore, in this study, we developed an effective method to protect vitamin D by encapsulating it in amylose. In detail, vitamin D was encapsulated by amylose inclusion complex, followed by structural characterization and evaluation of its stability and release properties. The results of X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy showed that vitamin D was successfully encapsulated in the amylose inclusion complex, and the loading capacity was 1.96% ± 0.02%. The photostability and thermal stability of vitamin D after encapsulation was increased by 59% and 28%, respectively. In addition, in vitro simulated digestion showed that vitamin D was protected through the simulated gastric environment and can be released gradually in the simulated intestinal fluid, implying its improved bioaccessibility. Our findings provide a practical strategy for the development of functional foods based on vitamin D.

Microwave imaging technology is a useful method often applied in medical diagnosis and can be used by the food industry to ensure food safety and quality. For fruit, ripeness is the primary characteristic which determines quality for the consumer. This paper proposes a novel microwave imaging system to determine the ripeness of watermelon as a proof of concept. The design employs a circular array with 10 Coplanar Vivaldi antennas offering wide bandwidth, high gain, and high efficiency. S-parameters between antennas are collected quickly via automated channel switching for fast image generation. Eight different watermelon samples of varying ripeness, type, dimensions, and origin are scanned and imaged. Comparisons with sample cross-sections show distinct differences in image characteristics based on watermelon maturity. Sugar concentration of unripe and ripe watermelon is also measured and plotted for further validation of the imaging technique., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Nathan Jeong reports financial support was provided by 10.13039/100000199USDA and Alabama Department of Agriculture. Yu Gan reports financial support was provided by US Department of Agriculture., (© 2022 The Authors.)

Purpose: Screen-detected unilateral non-palpable breast cancer (NPBC) shows favorable prognosis, whereas bilateral breast cancer (BBC), especially synchronous BBC (SBBC) manifests worse survival than unilateral breast cancer (BC). It remains unclear whether screen-detected bilateral NPBC has compromised survival and requires intensified treatment or favorable prognosis and needs de-escalating therapy., Methods: From 2003 to 2017, 1,075 consecutive NPBC patients were retrospectively reviewed. There were 988 patients with unilateral NPBC (UniNPBC), and 87 patients with ipsilateral NPBC + any contralateral BC [(N + AnyContra) PBC], including 32 patients with bilateral NPBC (BiNPBC) and 55 patients with ipsilateral NPBC + contralateral palpable cancer [(N + Contra) PBC]. Median follow-up time was 91 (48-227) months. Clinicopathological characteristics were compared between UniNPBC and BBC, whereas relapse-free survival (RFS) and overall survival (OS) among BBC subgroups. RFS and OS factors of BBC were identified., Results: Compared to UniNPBC, patients with screen-detected bilateral BC had more invasive (85.1%, 74.8%), ER negative (26.4%, 17.1%), PR negative (36.8%, 23.5%), triple-negative (21.6%, 8.5%) BC as well as less breast conserving surgery (17.2%, 32.4%), radiotherapy (13.8%, 32.0%) and endocrine therapy (71.3%, 83.9%). 10 year RFS and OS rates of (N + AnyContra) PBC (72.8%, 81.5%), (N + Contra) PBC (60.6%, 73.9%), and synchronous (N + Contra) PBC (58.1%, 70.1%) were significantly compromised compared to UniNPBC (91.0%, 97.2%). RFS factors of BBC included pN3 (p = 0.048), lymphovascular invasion (p = 0.008) and existence of contralateral palpable interval BC (p = 0.008), while the OS relevant factor was pN3 (p = 0.018)., Conclusion: Screen-detected bilateral NPBC including SynBiNPBC and MetaBiNPBC showed good prognosis as UniNPBC so that the therapy of BiNPBC could be de-escalated and optimized according to UniNPBC. Contrarily, screen-detected ipsilateral NPBC with contralateral palpable BC [(N + Contra) PBC] manifested unfavorable survival worse than UniNPBC and synchronous (N + Contra) PBC had the worst survival among all subgroups, implying that these were actually bilateral interval BC and required intensified treatment., (© 2022. The Author(s).)

Objectives: Interpretation discrepancy is a major disadvantage of breast imaging. This study aimed to determine the clinical benefit of the pre-biopsy second-look breast ultrasound (US)., Methods: Patients with suspicious breast masses referred to our tertiary hospital for US-guided breast biopsy were retrospectively reviewed between August 2017 and November 2019. Here, second-look assessments were performed by experienced specialized breast radiologists via performing a bilateral breast US scan plus reviewing former imaging studies, and results were compared with the initial assessment. Interpretation changes in terms of biopsy recommendation and surgical management (i.e., lumpectomy to mastectomy) were analyzed., Results: A total of 537 patients were enrolled in this study. Interpretation discrepancies occurred in 109 patients (20%; 95% CI, 17%-24%). Among them, there were 84 patients (16%; 95% CI, 13%-19%) whose masses were re-classified as BI-RADS 3 by the second-look US and underwent 2-year follow-up, showing 82 benign, 1 malignant, and 1 high-risk lesions. On the other hand, 16 patients (3%; 95% CI, 2%-5%) undertook biopsy at an additional site, identifying 10 new malignant lesions, 3 high-risk lesions, and 3 benign lesions, resulting in surgical management changes in 12 patients. In addition, nine (2%; 95% CI, 1%-3%) patients received discrepant disease ranges, which also altered surgical management. Overall, 21 patients (4%; 95% CI, 3%-6%) got their surgical management altered by the second-look US., Conclusion: Pre-biopsy second-look assessment of breast US can reduce unnecessary biopsies in 16% of patients and alter surgical management in 4% of patients, suggesting it is a practical and valuable method for patient care improvement., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Ma, Qin, Kong, Zhao, Xiao, Wang, Zhang, Jiang, Li, Liu and Zhu.)

High internal phase emulsions (HIPEs) stabilized by debranched starch-capric acid (DBS-CA) complex nanoparticles were fabricated and their performance was evaluated. DBS-CA was prepared through enzymatic debranching and solid encapsulation methods, and displayed V-type crystalline structure. Contact angle measurements show enhanced hydrophobicity of DBS-CA compared to native starch. The DBS-CA nanoparticles have an average size of 463.77 nm and tended to be aggregating as analyzed by scanning electron microscope and dynamic light scattering particle size analysis. When used as a particulate emulsifier, DBS-CA could stabilize HIPEs with oil volume fraction as high as 80%. The HIPEs showed pH-dependent properties; good storage stability and mechanical strength were achieved within pH range from 3 to 11, especially under alkaline conditions. It was proposed that smaller particle size and higher surface charging were responsible for the more tightly connected gel structure and thus their performance. This study demonstrates a novel approach to fabricate food-grade Pickering HIPEs, which may have many promising potential applications in the food industry., (Copyright © 2022 Elsevier B.V. All rights reserved.)

CO 2 capture and separation by using charge-modulated adsorbent materials is a promising strategy to reduce CO 2 emissions. Herein, three TM-HAB (TM=Co, Ni, and Cu; HAB=hexa-aminobenzene) metal-organic frameworks (MOFs) were evaluated as charge-modulated CO 2 capture and separation materials by using density functional theory and grand canonical Monte Carlo simulations. The results showed that each TM-HAB presented a high electrical conductivity and structural stability when injecting charges. The CO 2 adsorption energy increased from 0.211 to 2.091 eV on Co-HAB, 0.262 to 2.119 eV on Ni-HAB, and 0.904 to 2.803 eV on Cu-HAB, respectively, with the increase in charge state from 0.0 to 3.0 e - . Co-HAB and Ni-HAB were better charge-modulated CO 2 capture materials with less structure deformation based on energy decomposition analyses. The kinetic process demonstrated that considerably low energy consumptions of 0.911 and 1.589 GJ ton -1 CO 2 were observed for a complete adsorption-desorption cycle on Co-HAB and Ni-HAB. All charged MOFs, especially Co-HAB and Ni-HAB, exhibited higher CO 2 adsorption energies and adsorption capacities than those of H 2 , N 2 , and CH 4 , thereby exhibiting high CO 2 selectivities. Interaction analysis confirmed that the injecting charges had a more pronounced enhancement in the coulombic interactions between CO 2 and MOFs. The results of this work highlight Co-HAB and Ni-HAB as promising charge-modulated CO 2 capture and separation materials with controllable CO 2 capture, high selectivity, and low energy consumption., (© 2021 Wiley-VCH GmbH.)

Purpose: In addition to women, men also undergo breast surgeries, and early studies on the blood supply of breasts are nearly all conducted in female subjects. The vasculature of the male breast is seldom studied. Understanding the male-specific blood supply of the breast is important for pre-operative planning and reducing complications. The purpose of this retrospective study is to fill the gap in the literature by describing the main blood supply and its orientation in the male breast., Methods: We retrospectively evaluated thoracic computed tomographic angiography (CTA) data from January 1, 2017 to July 30, 2019. Single or multiple dominant arteries and their origins were traced, and the artery route and orientation related to the nipple-areola complex (NAC) were revealed through data analysis of the images., Results: Totally, 284 breasts were included. Most breasts were supplied by a single dominant artery (196, 69%), among which the lateral thoracic artery (LTA; 119, 41.9%; type I) and internal thoracic artery (ITA; 63, 22.2%; type II) were the most common arteries. A minority of breasts were supplied by vascular anastomoses formed by dual arteries (17, 6.0%; type III), and in 25.0% of breasts, no specific dominant artery was found (type IV). The predominant artery distribution was evaluated., Conclusion: This study cohort of male thoracic CTA provided and analysed the elaborate vascular anatomy of the NAC region. Our results favour inferior periareolar incision in regard to diminished vascular-related complications in male surgeries without pre-operative vascular evaluation. This study also suggests that super-lateral or lower-lateral-based pedicles can reserve more vasculature., Competing Interests: Declaration of Competing Interest The authors have nothing to declare., (Copyright © 2021. Published by Elsevier Ltd.)

Purpose: The purpose of this study was to evaluate the impact of artificial intelligence (AI)-based noise reduction algorithm on aorta computed tomography angiography (CTA) image quality (IQ) at 80 kVp tube voltage and 40 mL contrast medium (CM)., Materials and Methods: After obtaining institutional review board approval and 8 written informed consents, 60 patients (35 men, 25 women; age range: 18 to 85 y) referred for aorta CTA examination were assigned to 2 groups at random. Group A underwent an 80 kVp protocol with 40 mL CM (320 mg I/mL). Group A reconstructed with iterative reconstruction was named as group A1 and further AI-based noise reduction was named as group A2. Group B was scanned with standard 120 kVp, 80 mL CM, and iterative reconstruction algorithm. The quantitative assessment of IQ included aorta CT attenuation, noise, signal-to-noise ratio, and contrast-to-noise ratio. A 5-point scale (5-excellent, 1-poor) was used by 2 radiologists independently for qualitative IQ analysis., Results: The image noise significantly decreased while signal-to-noise ratio and contrast-to-noise ratio significantly increased in the order of group A1, B, and A2 (all P<0.05). Compared with group B, the subjective IQ score of group A1 was significantly lower (P<0.05), while that of group A2 had no significant difference (P>0.05). The effective dose and CM volume of group A were reduced by 79.18% and 50%, respectively, than that of group B., Conclusions: The AI-based noise reduction could improve the IQ of aorta CTA with low kV and reduced CM, which achieved the potential of radiation dose and contrast media reduction compared with conventional aorta CTA protocol.

The formation of high amylose corn starch (HACS)-alkylresorcinol (AR) inclusion complexes was demonstrated using HACS and a crude AR extract from rye bran, and was confirmed by complementary characterization techniques. Inclusion complex was extracted using hot 2-propanol/water (3:1), and thirteen different AR homologs were identified in the 2-propanol/water extract. However, this extraction regime was insufficient to remove all guests from the inclusion complexes, but did result in annealing of the V-type crystallinity, yielding an endotherm with higher onset and peak temperatures and dissociation enthalpy. The remaining guest compounds were recovered by disruption of the inclusion complexes with DMSO followed by liquid-liquid extraction. A total of nine AR homologs were recovered and two saturated long alkyl chain AR homologs (C21:0 and C19:0) were obviously enriched in the complexes compared to the crude AR extract. The formation of HACS-AR inclusion complexes may have the potential to inhibit staling in baked goods., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Objective To evaluate the value of third-generation dual-source CT scanner in application of high-pitch aorta CT angiography(CTA). Methods Totally 59 patients clinically indicated for whole aorta angiography were divided into 2 groups using a simple random method:in group 1 there were 28 patients who underwent the examination on a third-generation dual-source CT device,with a collimation of 2×192×0.6 mm and a rotation time of 0.25 s;in group 2 there were 31 patients who underwent the examination on a second generation dual-source CT device,with a collimation of 2×128×0.6 mm and a rotation time of 0.28 s. Both groups were given the examination operated in dual-source high-pitch ECG-gating mode with a pitch of 3.0,a tube voltage of 100 kV,and automated tube current modulation using a reference tube current of 288 mA. A contrast material bolus of 45 ml with a flow of 4.5 ml/s followed by a 50 ml saline chaser in 5.0 ml/s was used. CTA scan was automatically started using a bolus tracking technique at the level of the original part of aorta after a trigger threshold of 100 HU was reached. The start delay was set to 6 s in both groups. Effective dose(ED),signal to noise ratio (SNR),contrast to noise ratio (CNR),and subjective diagnostic quality of both groups were evaluated. Results The mean ED were 19.44% lower (t=-3.989,P=0.000) in group 1 [(3.15±0.86)mSv] than in group 2 [(3.91±0.60)mSv]. These two groups showed no significant differences in SNR or CNR (all P >0.05). The subjective diagnostic quality values also showed no significant difference between two groups [(1.39±0.50)scores vs. (1.45±0.51)scores;W=814.5,P=0.651].Conclusion Compared with the second-generation dual-source CT scanner,the third-generation dual-source CT scanner in whole aorta CTA can remarkably reduce the radiation dose without affecting image quality.

Objective To evaluate the application of automated tube potential selection technique in high-pitch dual-source CT aortic angiography on a third-generation dual-source CT scanner. Methods Whole aorta angiography were indiated in 59 patients,who were divided into 2 groups using a simple random method:in group 1 there were 31 patients who underwent the examination with automated tube potential selection using a vascular setting with a preferred image quality of 288 mA/100 kV;in group 2 there were 28 patients who underwent the examination with a tube voltage of 100 kV and automated tube current modulation using a reference tube current of 288 mA. Both groups were scanned on a third generation dual-source CT device operated in dual-source high-pitch ECG-gating mode with a pitch of 3.0,collimation of 2×192×0.6 mm,and a rotation time of 0.25 s. Iterative reconstruction algorithm was used. For group 1,the volume and flow of contrast medium and chasing saline were adapted to the tube voltage. For group 2,a contrast material bolus of 45 ml with a flow of 4.5 ml/s followed by a 50 ml saline chaser at 5 ml/s was used. CTA scan was automatically started using a bolus tracking technique at the level of the original part of aorta after a trigger threshold of 100 HU was reached. The start delay was set to 6 s in both groups. Effective dose (ED),signal to noise ratio (SNR),contrast to noise ratio (CNR),and subjective diagnostic quality of both groups were evaluated. Results The mean ED were 21.3% lower (t=-3.099,P=0.000) in group 1 [(2.48±0.80) mSv] than in group 2 [(3.15±0.86) mSv]. Two groups showed no significant difference in attenuation,SD,SNR,or CNR at all evaluational parts of aorta (ascending aorta,aortic arch,diaphragmatic aorta,or iliac bifurcation)(all P>0.05). There was no significant difference in subjective diagnostic quality values of two groups [(1.41±0.50) scores vs. (1.39±0.50) scores;W=828.5,P=0.837]. Conclusion Compared with automated tube current modulation,the automated tube potential selection technique in aorta CT angiography on a third-generation dual-source CT can dramatically reduce radiation dose without affecting image quality.

Objective To evaluate the feasibility of a low-dose one-stop-shop cardiac CT imaging protocol with third-generation dual-source CT (DSCT). Methods Totally 23 coronary artery disease (CAD) patients were prospectively enrolled between March to September in 2016. All patients underwent an ATP stress dynamic myocardial perfusion imaging (MPI) (data acquired prospectively ECG-triggered during end systole by table shuttle mode in 32 seconds) at 70 kV combined with prospectively ECG-triggered high-pitch coronary artery angiography (CCTA) on a third-generation DSCT system. Myocardial blood flow (MBF) was quantified and compared between perfusion normal and abnormal myocardial segments based on AHA-17-segment model. CCTA images were evaluated qualitatively based on SCCT-18-segment model and the effective dose(ED) was calculated. In patients with subsequent catheter coronary angiography (CCA) as reference,the diagnosis performance of MPI (for per-vessel ≥50% and ≥70% stenosis) and CCTA (for≥50% stenosis) were assessed. Results Of 23 patients who had completed the examination of ATP stress MPI plus CCTA,12 patients received follow-up CCA. At ATP stress MPI,77 segments (19.7%) in 13 patients (56.5%) had perfusion abnormalities. The MBF values of hypo-perfused myocardial segments decreased significantly compared with normal segments [(93±22)ml/(100 ml·min) vs. (147±27)ml/(100 ml·min);t=15.978,P=0.000]. At CCTA,93.9% (308/328) of the coronary segments had diagnostic image quality. With CCA as the reference standard,the per-vessel and per-segment sensitivity,specificity,and accuracy of CCTA for stenosis≥50% were 94.1%,93.5%,and 93.7% and 90.9%,97.8%,and 96.8%,and the per-vessel sensitivity,specificity and accuracy of ATP stress MPI for stenosis≥50% and ≥70% were 68.7%,100%,and 89.5% and 91.7%,100%,and 97.9%. The total ED of MPI and CCTA was (3.9±1.3) mSv [MPI:(3.5±1.2) mSv,CCTA:(0.3±0.1) mSv]. Conclusion The third-generation DSCT stress dynamic MPI at 70 kV combined with prospectively ECG-triggered high-pitch CCTA is a feasible and reliable tool for clinical diagnosis,with remarkably reduced radiation dose.

Objective 　To investigate the optimized range of body mass index (BMI) selection for patients undergoing 70 kV high-pitch dual-source coronary CT angiography (CCTA) on the third-generation dual-source CT (DSCT). Methods 　Patients undergoing prospective high-pitch ultra-low contrast media (CM) CCTA on the third-generation DSCT using the automatic tube voltage selection at 70 kV were included and divided into three groups:group A,with BMI≤24 kg/m 2 ;group B,with 24 kg/m 2 2 ;and group C,with BMI≥28 kg/m 2 . The baseline data,image quality results,and effective dose (ED) were evaluated and compared. Results 　No significant difference was found in age (H=2.36,P=0.78),heart rate (H=3.51,P=0.80),and ED(H=1.77,P=0.12) among three groups. The noise of the aortic root in group A was (21.66±4.00)HU,which was significantly lower than that in group C [(23.61±4.20)HU](F=2.05,P=0.03). The signal to noise ratio of aortic root in group A (18.61±5.28) was significantly better than that in group C (14.75±2.58) (F=5.31,P=0.02). No other significant difference in quantitative image quality were found among the three groups (all P >0.05). Subjective image quality in group A(Z=2.91,P=0.004) and B(Z=2.27,P=0.021) were both significantly better than that in group C. Conclusion 　The ultra-low tube voltage (70 kV) combined with ultra-low CM CCTA protocol on third-generation high-pitch DSCT may be better for patients with BMI<28 kg/m2 than those with BMI ≥28 kg/m 2 in China.

In the present study, we introduce a simple method to prepare inclusion complexes by "inserting" guest molecules into preformed "empty" V-type amylose helices. Ascorbyl palmitate (AscP) was used as a model guest material to investigate the effect of solvent environment, complexation temperature, annealing and guest concentration on inclusion complex formation. High complexation temperature was not necessary for encapsulating guest molecules in amylose helices, avoiding thermal degradation of guest compounds. This method would also avoid the wasting of guest materials because uncomplexed guest can be reused. It was found in the study that intermediate ethanol and acetone concentrations (generally 40-60%, v/v) at room temperature were appropriate for the complexation between V-amylose and AscP. Annealing, i.e. heat treatment in ethanol solutions at elevated temperatures (45-70 °C), was able to significantly increase the crystallinity of V-amylose and V-starch to as high as 65% and facilitate greater complexation evidenced from higher enthalpies, probably due to more regularly arranged helical cavities in larger crystalline phase. The complexation between V-amylose and AscP was also found to be enhanced with AscP concentration, while the dissociation temperature experienced a slight decrease., (Copyright © 2014 Elsevier Ltd. All rights reserved.)