Search

Molecular gases are highly relevant in healthcare, production control, safety, and environmental monitoring. They often appear in small concentrations. The measurement of trace gases has increasingly become a key technique in those domains. Quartz-enhanced photoacoustic spectroscopy (QEPAS) is a suitable method that can provide the required low detection limits in such applications at comparatively low cost and small size. For mobile implementation, the size of an entire sensor unit matters. In this paper, we present a QEPAS sensor that fits into a standard butterfly package, its characterization, and its application on C H 4 and C O 2 .

Active anodes which are operating in highly stable protic media such as 1,1,1,3,3,3-hexafluoroisopropanol are rare. Nickel forms, within this unique solvent, a non-sacrificial active anode at constant current conditions, which is superior to the reported powerful molybdenum system. The reactivity for dehydrogenative coupling reactions of this novel active anode increases when the electrolyte is not stirred during electrolysis. Besides the aryl-aryl coupling, a dehydrogenative arylation reaction of benzylic nitriles was found while stirring the mixture providing quick access to synthetically useful building blocks., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Cladding waveguide fiber Bragg gratings (FBGs) provide a compact and simple solution for fiber shape sensing. The shape sensing accuracy is limited by birefringence, which is induced by bending and the non-isotropic FBG structure (written by femtosecond laser point-by-point technique). An algorithm based on an artificial neural network for fiber shape sensing is demonstrated, which enables increased accuracy, better robustness, and less time latency. This algorithm shows great potential in the application of high-accuracy real-time fiber shape measurements.

Femtosecond laser micromachining is an important and flexible method to generate precisely targeted surfaces on various materials. On titanium, the laser structuring process strongly depends on the laser parameters. For example, an increasement of the pulse length and repetition rate favors melting processes instead of ablation and microstructuring. We report on an investigation of reactive halogens (iodine, bromine, chlorine) and halocarbons as additives to the laser structuring process of pure titanium and the common alloy Ti-6Al-4V with 0.75 ps laser pulses. The choice of the halogen allows control of whether solely the chemical composition or the surface microstructure should be altered. Bromine was found to be an efficient additive to generate homogeneous microstructures based on micropillars at convenient conditions (air, atmospheric pressure). The resulting surfaces have been characterised by scanning electron microscopy, energy dispersive X-ray spectroscopy, thermal emission infrared photography, reflective UV/Vis spectroscopy and contact angle measurements. The bromine/air processed titanium surfaces revealed superhydrophilicity, strongly increased thermal emissivity and a high absorptivity ("black metal")., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The MIR wavelength regime promises better gas detection possibilities than the NIR or the visible region because of the higher absorbencies simulated by HITRAN. In the MIR region are many important absorption lines of significant gases, which are relevant in healthcare, production supervision, and safety and environmental monitoring. One of those gases is methane. CH4 shows significant variations in absorbance with a maximum at 3.3 μm, which results in low detection limits in the range of low ppm. Interband-cascade- and quantum-cascade-based lasers emit at higher wavelengths, where the absorbencies of methane are higher. The comparison is done by analyzing the performance of two spectroscopy applications: tunable diode laser absorption spectroscopy and quartz-enhanced photoacoustic spectroscopy.

This Letter describes the design, production, and characterization of a 1×2 arrayed waveguide grating (AWG) for fiber Bragg grating (FBG) readout, centered at 850 nm, with a channel spacing of 1 nm. The employed manufacturing process is laser direct lithography, a low-cost, rapid-prototyping capable, maskless method that allows for short iteration cycles and simple migration of a successful design to mask-based high throughput methods. We also consider the achievable AWG performance if used for strain or temperature measurements with FBG sensors.

Point-by-point femtosecond laser processed fiber Bragg gratings are arranged around the edge of a standard single-mode optical fiber core. The relative amplitudes of at least three such fiber Bragg gratings are utilized to detect the central position of the mode field within the fiber core and calculate the local curvature of the fiber. An analytical approximation is given, and an experimental validation is performed.

In this research work, we show the successful inscription of fiber Bragg gratings into carbon-coated pure silica as well as germanium-doped glass fibers by applying the pulsed laser point-by-point manufacturing technique. First, the parameters used for the Ti:sapphire femtosecond laser process are demonstrated. Without removing the polymeric carbon coating, destruction-free formation of highly reflective Bragg gratings is performed with selected types of hermetically enclosed fibers. We demonstrate the advantage of the carbon coating by long-term exposure to a pure hydrogen atmosphere at an elevated temperature. Such harsh conditions exist in the oil and gas industry, which means there is high application potential for technologically advanced optical sensors. Compared to the also examined standard glass fibers with a distinct signal attenuation, carbon-coated fibers show no significant degradation. Finally, we analyze the mechanical stability of the processed fibers via standardized tensile tests. No substantial decrease in strength occurs among the sensor-integrated samples.

The measurement of trace gases has increasingly become a key technique in healthcare and other medical applications. Quartz-enhanced photoacoustic spectroscopy (QEPAS) is a suitable method that can provide the required characteristics in such applications for a comparatively low cost and small size. The quantitative detection and a low detection limit are also required by applications. In this paper, we present new results on sensing biomedically relevant gases using the on-beam QEPAS technique with some newly developed tunable high-power single-mode laser diodes based on GaSb material. The data processing and detection limit determination are done by a field programmable gate array device, as well as an automatic measurement of the resonance frequency.

A fiber Bragg grating (FBG) interrogation system based on an intensity demodulation and demultiplexing of an arrayed waveguide grating (AWG) module is examined in detail. The influence of the spectral line shape of the FBG on the signal obtained from the AWG device is discussed by accomplishing the measurement and simulation of the system. The simulation of the system helps to create quickly and precisely calibration functions for nonsymmetric, tilted, or nonapodized FBGs. Experiments show that even small sidebands of nonapodized FBGs have strong influences on the signal resulted by an AWG device with a Gaussian profile.

A fiber Bragg grating sensor system used for monitoring the effects of strain on the power cable of an offshore wind turbine is presented. The Bragg grating structure was inscribed into coated nonphotosensitive standard telecommunication fibers using an IR femtosecond laser and the point-by-point writing technique. Because of the presence of the protective coating of the fiber, the mechanical stability of the resultant sensor device is better than that of a sensor consisting of a bare fiber. A system containing this sensing element was to our knowledge for the first time successfully installed and tested in an offshore wind turbine prototype (REpower 6M, REpower Systems, AG, Germany) in February 2010, near Ellhöft (Germany). The fabrication process of the fiber Bragg gratings, measurement results of the online monitoring, and a comparison between the sensor signal and commonly used sensing techniques are presented.

A microring resonator sensor device for sensitive detection of the explosive 1,3,5-trinitrotoluene (TNT) is presented. It is based on the combination of a silicon microring resonator and tailored receptor molecules.

Molecular oxygen is detected at low concentrations using photoacoustic spectroscopy despite its unfavorable photoacoustic properties. The system consists of a seed laser diode, a tapered amplifier and a quartz tuning fork based spectrophone, thus employing quartz enhanced photoacoustic spectroscopy (QEPAS). With this system a detection limit of 13 ppm is reached with a compact and long term stable setup. Further improvement of the detection limit is possible by adding suitable gases to the sample gas that promote the radiationless de-excitation of the oxygen molecules.

For the sensitive online and in situ detection of gaseous species, optical methods are ideally suited. In contrast to chemical analysis, no sample preparation is necessary and therefore spectroscopic methods should be favorable both in respect of a fast signal recovery and economically because no disposal is needed. However, spectroscopic methods are currently not widely used for security applications. We review photonic sensor devices for the detection of explosives in the gas phase as well as the condensed phase and the underlying spectroscopic techniques with respect to their adaptability for security applications, where high sensitivity, high selectivity, and a low false-alarm rate are of importance. The measurements have to be performed under ambient conditions and often remote handling or even operation in standoff configuration is needed. For handheld and portable equipment, special attention is focused on the miniaturization and examples for already-available sensor devices are given.

THz-sensing is an emerging technology that would be advantageous for a variety of applications in industry, biology, biochemistry and security, if small and convenient to use sources and detectors would be readily available. However, most of them are bulky, complicate to operate, and need cryogenic cooling. Here we present a new detection scheme that is versatile enough to detect electro-magnetic radiation within the whole spectrum, can be easily applied to the THz-range, and operates at room temperature. The mechanism is based on the resonant excitation of a quartz tuning fork.

Conventional fiber optic evanescent-field gas sensors are based on a high number of total reflections while the gas is passing the active bare core fiber and of course a suitable laser light source. The use of miniaturized laser sources for sensitive detection of CO(2) in gaseous and water-dissolved phase for environmental monitoring are studied for signal enhancing purposes. Additionally, the fiber optic sensor, consisting of a coiled bare multimode fiber core, was sensitized by an active polymer coating for the detection of explosive TNT. The implementation of ZnO waveguiding nanowires is discussed for surface and sensitivity enhancing coating of waveguiding elements, considering computational and experimental results.

A mechanical quartz microresonator (tuning fork) is used to detect electromagnetic radiation. The detection scheme is based on forces created due to the incident electromagnetic radiation on the piezoelectric tuning fork. A force can be created due to the transfer of the photon momentum of the incident electromagnetic radiation. If the surfaces of the tuning fork are nonuniformly heated, a second force acts on it, the so-called photophoretic force. These processes occur for all wavelengths of the incident radiation, making the detector suitable for sensing of ultraviolet, visible, and mid-infrared light, even THz-radiation. Here the detector is characterized in the visible range; noise analysis is performed for 650 nm and 5.26 microm. A linear power characteristic and the dependence on pulse lengths of the incoming light are shown. Examples for applications for the visible and mid-infrared spectral region are given by 2f and absorption spectroscopy of oxygen and nitric oxide, respectively.

What we believe to be a new optical approach for the identification of mines and explosives by analyzing the surface materials and not only bulk is developed. A conventional manually operated mine prodder is upgraded by laser-induced breakdown spectroscopy (LIBS). In situ and real-time information of materials that are in front of the prodder are obtained during the demining process in order to optimize the security aspects and the speed of demining. A Cr4+:Nd3+:YAG microchip laser is used as a seed laser for an ytterbium-fiber amplifier to generate high-power laser pulses at 1064 nm with pulse powers up to E(p) = 1 mJ, a repetition rate of f(rep.) = 2-20 kHz and a pulse duration of t(p) = 620 ps. The recorded LIBS signals are analyzed by applying neural networks for the data analysis.

A compact mid-infrared (MIR) laser spectrometer based on difference-frequency generation (DFG) is applied as a portable and sensitive gas sensor for industrial process control and pollutant monitoring. We demonstrate the performance of such a MIR DFG gas sensor by recording the absorption spectra of the carbon monoxide (CO) P(28) absorption line in the atmosphere of a gas-fired glass melting furnace. For a gas temperature of approximately 1100 degrees C, the CO concentration in the recuperator channel is measured to be 400 parts per million.

A compact, rugged and portable fiber-optic evanescent-field laser sensor is developed for the detection of gaseous species in harsh environments such as volcano fumaroles or industrial combustion of glass furnaces. The sensor consists of an optical multi-mode fused silica fiber with jacket and cladding removed and the bare fiber core in direct contact with the surrounding molecules. The beam of a single-mode DFB diode laser with an emission wavelength centered at 1.5705 microm is coupled into the fiber. At the other end of the fiber an infrared detector is used to record the transmitted infrared laser light intensity. Due to the frustrated total reflection (FTR) and the attenuated total reflection (ATR) the laser intensity is attenuated when passing through the fiber. The FTR is related to a change of the index of refraction while the latter one is related to a change of the absorption coefficient. While tuning the DFB laser wavelength across absorption lines of molecules surrounding the fiber a spectral intensity profile is measured. Voigt functions are fitted to the recorded intensity profiles to estimate relative molecule concentrations. In this paper results from first field measurements at the volcano site 'Solfatara' in Italy are reported that use such a sensor device for simultaneous detection of H2S, CO2 and H2O directly in the gas stream of a volcano fumarole.