Search

Understanding of H- and J-aggregation behaviors in fluorene-based polymers is significant both for determining the origin of various red-shifted emissions occurring in blue-emitting polyfluorenes and for developing polyfluorene-based device performance. In this contribution, we demonstrate a new theory of the H- and J-aggregation of polyfluorenes and oligofluorenes, and understand the influence of chromosphere aggregation on their photoluminescent properties. H- and J-aggregates are induced by a continuous increasing concentration of the oligofluorene or polyfluorene solution. A relaxed molecular configuration is simulated to illustrate the spatial arrangement of the bonding of fluorenes. It is indicated that the relaxed state adopts a 21 helical backbone conformation with a torsion angle of 18° between two connected repeat units. This configuration makes the formation of H- and J-aggregates through the strong π-π interaction between the backbone rings. A critical aggregation concentration is observed to form H- and J-aggregates for both polyfluorenes and oligofluorenes. These aggregates show large spectral shifts and distinct shape changes in photoluminescent excitation (PLE) and emission (PL) spectroscopy. Compared with "isolated" chromophores, H-aggregates induce absorption spectral blue-shift and fluorescence spectral red-shift but largely reduce fluorescence efficiency. "Isolated" chromophores not only refer to "isolated molecules" but also include those associated molecules if their conjugated backbones are not compact enough to exhibit perturbed absorption and emission. J-aggregates induce absorption spectral red-shift and fluorescence spectral red-shift but largely enhance fluorescence efficiency. The PLE and PL spectra also show that J-aggregates dominate in concentrated solutions. Different from the excimers, the H- and J-aggregate formation changes the ground-state absorption of fluorene-based chromophores. H- and J-aggregates show changeable absorption and emission derived from various interchain interactions, unlike the β phase, which has relatively fixed absorption and emission derived from an intrachain interaction.

We report a facile method to synthesize Fe3O4@polydopamine (PDA)-Ag core-shell microspheres. Ag nanoparticles (NPs) are deposited on PDA surfaces via in situ reduction by mussel-inspired PDA layers. High catalytic activity and fast adsorption of a model dye methylene blue (MB) at different pH values are achieved mainly due to the presence of monodisperse Ag NPs and electrostatic interactions between PDA and MB. The as-prepared Fe3O4@PDA-Ag microspheres also show high cyclic stability (>27 cycles), good acid stability, and fast regeneration ability, which can be achieved efficiently within several minutes by using NaBH4 as the desorption agent, showing great potentials in a wide range of applications.

The C-8 position of the tetracyclines has been largely underexplored because of limitations in traditional semisynthetic techniques. Employing a total synthetic approach allowed for modifications at the C-7 and C-8 positions, enabling the generation of structure-activity relationships for overcoming the two most common tetracycline bacterial-resistance mechanisms: ribosomal protection (tet(M)) and efflux (tet(A)). Ultimately, several compounds were identified with balanced activity against both Gram-positive and Gram-negative bacteria, including pathogens bearing both types of tetracycline-resistance mechanisms. Compounds were screened in a murine systemic infection model to rapidly identify compounds with oral bioavailability, leading to the discovery of several compounds that exhibited efficacy when administered orally in murine pyelonephritis and pneumonia models.

The paper reports on a headspace gas chromatographic (HS-GC) method for the determination of methoxyl in lignin. The method involves the quantitive cleavage of methoxyl with hydroiodic acid (HI) to form methyl iodide in a closed headspace sample vial at 130 °C for 30 min. After HI has been added, the sample is neutralized by injecting a sodium hydroxide solution; the methyl iodide in the vial was determined by HS-GC using a flame ionization detector. The results showed that the method has an excellent measurement precision (RSD < 0.69%) and accuracy (RSD < 3.5%) for the quantification of methoxyl content in lignin. The present method is simple and accurate and can be used for the efficient determination of methoxy1 content in lignin and related materials.

Utilizing a fully synthetic route to tetracycline analogues, the C-9 side-chain of the fluorocyclines was optimized for both antibacterial activity and oral efficacy. Compounds were identified that overcome both efflux (tet(K), tet(A)) and ribosomal protection (tet(M)) tetracycline-resistance mechanisms and are active against Gram-positive and Gram-negative organisms. A murine systemic infection model was used as an oral efficacy screen to rapidly identify compounds with oral bioavailability. Two compounds were identified that exhibit both oral bioavailability in rat and clinically relevant bacterial susceptibility profiles against major respiratory pathogens. One compound demonstrated oral efficacy in rodent lung infection models that was comparable to marketed antibacterial agents.

Sequentially adsorbed multilayers composed of sodium lignosulfonate (SL) and poly(diallyldimethylammonium chloride) (PDAC) were built up by a layer-by-layer self-assembly technique to investigate the adsorption characteristics of SL microgels for sensitivity improvement. The effect of molecular weight on the adsorption characteristics was investigated by light scattering, UV-visible spectroscopy, ellipsometer, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. Results show that the self-assembly of SL microgels and PDAC is not mainly driven by electrostatic interaction but by cation-π interaction and hydrophobic interaction. The Coulomb interaction in SL microgels causes a "slow mode" peak in dynamic light scattering measurement, but it can be completely suppressed when SL is dissolved in 1.2 mol/L NaCl solutions due to charge-screening. The SL in 1.2 mol/L NaCl solutions can be well adsorbed on a PDAC surface, indicating that the electrostatic interaction is not the main driving force. The presence of cation-π interaction between SL and PDAC is detected by a stoichiometric ratio of SL to PDAC in SL/PDAC self-assembled films. During SL/PDAC self-assembly, hydrophobic interaction plays an important role in determining the adsorption rate, film thickness, surface morphology, and surface properties. SL with a higher M(w) has a stronger hydrophobic ability in water, so it exhibits a slower adsorption rate, a larger film thickness, and a higher film roughness. SL with different M(w) has almost the same wettability because of a larger hydrophobic effect that increases contact angle and a higher film roughness that decreases contact angle. In this case, the opposite effects cancel each other to make no difference in wettability, but it still reflects the role of the hydrophobic effect in surface properties.

Five sodium lignosulfonate (SL) fractions with narrow molecular weight distribution and known salt content were used as the polyanion to build up layer-by-layer self-assembly multilayers with poly(diallyldimethylammonium chloride) (PDAC) as polycation. It is interesting to find that the salt-free SL is hardly adsorbed on the PDAC surface, but the SL in salt-added solutions can be self-assembled well with PDAC to form SL/PDAC multilayers. When the five SL fractions dissolved in saline solutions are adsorbed on the PDAC surface by a self-assembly technique, SL with higher M(w) shows a higher adsorption amount than does SL with lower M(w). The driving forces of self-assembly of SL and PDAC are discussed based on the solution behaviors and adsorption characteristics of SL in salt-free and salt-added aqueous solutions. A possible self-assembled mechanism of SL and PDAC is electrostatic or cation-π interactions, but the SL cannot be adsorbed onto the PDAC surface without a hydrophobic interaction. With the addition of enough salt, the Coulomb interaction of SL becomes negligible, but the adsorption amount increases, indicating that the electrostatic interaction is not the main driving force of SL/PDAC self-assembly. For adsorption of SL in saline solution onto the PDAC surface, the cation-π interaction is the main driving force, and the hydrophobic interaction plays an important role in the adsorbed amount.

Molecular iodine has been introduced into the alkali lignin (AL) solutions to adjust the π-π aggregation, and the effect of lignin-iodine complexes on the aggregation and assembly characteristics of AL have been investigated by using fluorescence, UV-vis spectroscopy, light scattering, and viscometric techniques. Results show that AL form π-π aggregates (i.e., J-aggregates) in THF driven by the π-π interaction of the aromatic groups in AL, and the π-π aggregates undergo disaggregation in THF-I(2) media because of the formation of lignin-iodine charge-transfer complexes. By using iodine as a probe to investigate the aggregation behaviors and assembly characteristics, it is estimated that about 18 mol % aromatic groups of AL form π-π aggregates in AL molecular aggregates. When molecular iodine is introduced into the AL solutions, lignin-iodine complexes occur with charge-transfer transition from HOMO of the aromatic groups of AL to the LUMO of iodine. The formation of lignin-iodine complexes reduces the affinity of the aromatic groups approaching each other due to the electrostatic repulsion and then eliminates the π-π interaction of the aromatic groups. The disaggregation of the π-π aggregates brings a dissociation behavior of AL chains and a pronounced molecular expansion. This dissociation behavior and molecular expansion of AL in the dipping solutions induce a decrease in the adsorbed amount and an increase in the adsorption rate, when AL is transferred from the dipping solution to the self-assembled adsorbed films. Consequently, the adsorption behavior of AL can be controlled by adjusting the π-π aggregation. Above observations give insight into the occurrence of J-aggregation of the aromatic groups in the AL molecular aggregates and the disaggregation mechanism of AL aggregates induced by the lignin-iodine complexes for the first time. The understanding can provide an academic instruction in the efficient utilization of the alkali lignin from the waste liquor and also leads to further development in expanding functionalities of the aromatic compounds through manipulation of the π-π aggregation.

Lignosulfonate is an anionic surfactant from pulp processing industries. Alcohols are often used as cosurfactants in the application of surfactant. The improvement of straight-chain alcohols with different alkyl chain lengths as cosurfactant on the physicochemical properties of calcium lignosulfonate (CL) aqueous solution has been investigated. The results indicate that small amounts of straight-chain alcohols with longer alkyl chains are helpful in improving the surface activity of CL, especially when the number of carbon atoms in alcohols is 10 or larger. The adsorption amount of CL solutions with additives of longer chain alcohols on TiO(2) particles increases greatly, and the zeta potential of TiO(2) particles adsorbing CL rises significantly. It can be concluded that there is a cooperative effect of the longer chain alcohols on lignosulfonate to form a tighter adsorption layer at the interface. The steric hindrance increases with the increasing amount of adsorption, and the static repulsive force increases with the increasing zeta potential. Therefore, the effect of CL on the stability of the TiO(2) suspension is enhanced dramatically by addition of longer chain alcohols. This understanding can lead to further development in expanding the functionalities of the lignosulfonate through manipulation of the adsorption capacity of CL on solid particles and enhance the dispersive ability of CL on solid suspensions by adding longer straight-chain alcohols.

In this work, azobenzene-containing colloidal spheres have been fabricated and used to construct photoresponsive monolayers. The colloidal spheres were prepared from an amphiphilic azobenzene-containing random copolymer through hydrophobic aggregation of the polymer chains, which was induced by adding the selective solvent (H2O) into a THF solution of the polymer. The size and size distribution of the spheres depended on the initial concentration of the azo polymer in THF and the H2O/THF ratio. Adjusting those factors and optimizing other preparation conditions, uniform colloidal spheres could be obtained. Monolayers composed of hexagonally close-packed colloidal spheres were prepared by the capillary-force-driven method. The colloidal monolayers showed obvious dichroism after laser irradiation due to the photoinduced azo-chromophore orientation occurred in the spheres. The orientation order parameter was related to the irradiation time and estimated to be 0.09 at the photostationary state. The colloidal spheres and their monolayers can potentially be used as building blocks or media for reversible optical data storage, photo-switching, sensors, and other photo-driven devices.

A new route to 24-nortriterpene derivatives with 2-hydroxy-Delta(1,4)-cyclohexadien-3-one A-rings from triterpene precursors has been demonstrated beginning with betulin to prepare derivatives of betulinic acid. The key steps in the transformation are a Suárez cleavage of the A-ring with a subsequent SmI(2)-mediated pinacol-type coupling to reclose the A-ring following removal of the C-24 carbon by oxidative cleavage.

Unusually robust: A remarkably temperature-independent catalyst has been developed for the imino aldol reaction of imines derived from ortho-aminophenols. This catalyst is prepared from two equivalents of the VAPOL ligand and a zirconium tetraalkoxide. From a consideration of likely intermediates in the catalytic cycle it was deduced that a methyl substituent ortho to the phenol (R 1 ) should enhance induction. This resulted in asymmetric inductions in excess of 98 % ee at room temperature as well as at 100°C. TMS=trimethylsilyl., (© 2001 WILEY-VCH Verlag GmbH, Weinheim, Fed. Rep. of Germany.)