Search

Metal-semiconductor nanozyme of dumbbell Au-CeO 2 with spatially separated heterostructure has cascade superoxide dismutase (SOD)-like and peroxidase (POD)-like activities for superoxide anions detection. It was synthesized by selective growth of CeO 2 at the ends of Au nanorod (Au NR). Taking advantage of the excellent local surface plasmon resonance (LSPR) effect of Au NR, the spatially separated Au-CeO 2 has a higher photothermal effect than the continuously growing core-shell structure of Au@CeO 2 . Meanwhile, the hot electrons of Au NR could transfer to CeO 2 under 808 nm laser irradiation, changing the ratio of Ce 3+ /Ce 4+ redox couples over CeO 2 and facilitating H 2 O 2 decomposition thus enhancing POD-like activity. Based on the SOD-like activity of Au-CeO 2 , superoxide anion (O 2 ·- ) can be transformed into hydrogen peroxide (H 2 O 2 ). Dual-mode including absorbance and temperature sensing detection of O 2 ·- , with the detection range from nM to μM i.e., 0.1-150 μM and LOD of 0.033 μM (S/N = 3) was achieved through the cascade catalysis and photothermal effect. The as-proposed method was applicable to both cancer and normal cell samples with satisfactory accuracy and recovery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Understanding the adsorption behavior of asphaltene molecules on the surfaces of oil reservoir solids is essential for optimizing oil recovery processes. This study employed molecular dynamics simulations to investigate the adsorption behavior of oil droplets composed of charged and neutral asphaltenes on silica surfaces. The results revealed that oil droplet containing anionic asphaltene molecules were more likely to adsorb onto silica surfaces and exhibited greater resistance to detachment compared to oil droplet containing neutral asphaltene molecules. Specifically, anionic asphaltene molecules tended to accumulate at the oil-water-silica interface, whereas neutral asphaltene molecules primarily adsorbed near the oil-water interface. These findings provide valuable insights into the differing adsorption dynamics of charged and neutral asphaltene molecules on silica surfaces., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Amide derivative receptors have been designed to investigate the oxoanion complexation ability via hydrogen and halogen bond interactions. Structural, energetic and electronic properties of nitroisophthalamide receptors, i.e., di(benzyl)- (R1), di(hexafluoro)- (R2), di(chloro-,tetrafluoro)- (R3), di(hexachloro)-(R4), di(fluoro-,tetrachloro)-nitroisophthalamide (R5), and their complexes with C 2 H 3 O 2 - , C 7 H 5 O 2 - , NO 3 - , H 2 PO 4 - , and ClO 4 - oxoanions were computed and obtained using the density functional theory calculations at the B3LYP/6-31G(d,p) theoretical level in gas phase. According to the computed results, all of oxoanions can form the stable complexes with amide receptors R1-R5 via exothermic process in which receptor R1 is found to interact with oxoanions through hydrogen bonds whereas the receptors R2-R5 are found to interact with oxoanion through both of hydrogen and halogen bonds. It is clearly seen that acetate ion displays the strongest complexation interaction with all receptors compared to the other oxoanions. In addition, electronic properties of receptors R1-R5 in both gas and DMSO phases are modified after complexation with oxoanions. Therefore, the designed amide receptors may be potentially used for oxoanion sensing application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Toxoplasmosis, induced by the intracellular parasite Toxoplasma gondii , holds considerable implications for global health. While treatment options primarily focusing on folate pathway enzymes have notable limitations, current research endeavours concentrate on pinpointing specific metabolic pathways vital for parasite survival. Carbonic anhydrases (CAs, EC 4.2.1.1) have emerged as potential drug targets due to their role in fundamental reactions critical for various protozoan metabolic processes. Within T. gondii , the Carbonic Anhydrase-Related Protein (TgCA_RP) plays a pivotal role in rhoptry biogenesis. Notably, α-CA (TcCA) from another protozoan, Trypanosoma cruzi , exhibited considerable susceptibility to classical CA inhibitors (CAIs) such as anions, sulphonamides, thiols, and hydroxamates. Here, the recombinant DNA technology was employed to synthesise and clone the identified gene in the T. gondii genome, which encodes an α-CA protein (Tg_CA), with the purpose of heterologously overexpressing its corresponding protein. Tg_CA kinetic constants were determined, and its inhibition patterns explored with inorganic metal-complexing compounds, which are relevant for rational compound design. The significance of this study lies in the potential development of innovative therapeutic strategies that disrupt the vital metabolic pathways crucial for T. gondii survival and virulence. This research may lead to the development of targeted treatments, offering new approaches to manage toxoplasmosis.

This study refers to the intricate world of Acinetobacter baumannii , a resilient pathogenic bacterium notorious for its propensity at antibiotic resistance in nosocomial infections. Expanding upon previous findings that emphasised the bifunctional enzyme PaaY, revealing unexpected γ-carbonic anhydrase (CA) activity, our research focuses on a different class of CA identified within the A. baumannii genome, the β-CA, designated as 𝛽-AbauCA (also indicated as CanB), which plays a crucial role in the resistance mechanism mediated by AmpC beta-lactamase. Here, we cloned, expressed, and purified the recombinant 𝛽-AbauCA, unveiling its distinctive kinetic properties and inhibition profile with inorganic anions (classical CA inhibitors). The exploration of 𝛽-AbauCA not only enhances our understanding of the CA repertoire of A. baumannii but also establishes a foundation for targeted therapeutic interventions against this resilient pathogen, promising advancements in combating its adaptability and antibiotic resistance.

This paper discusses the development of an analytical method by an alternative separation approach, sequential elution liquid chromatography (SE-LC), to separate permanently charged ions (anions), weak acids, and neutral compounds using anion exchange and reversed-phase columns in tandem. SE-LC separates classes of compounds by group by employing two or more elution modes. Advantages to using SE-LC over conventional HPLC are a greater peak capacity and a reduced separation disorder. Importantly, the same HPLC as used for a conventional HPLC separation may be used to afford a successful SE-LC separation. Mobile phase selection and gradient optimization are integral for a successful SE-LC class separation of permanent anions, weak acids, and neutral compounds and will be discussed in detail in this paper. The most successful (best resolution and repeatability) SE-LC separation was achieved by applying isocratic elution at low pH to elute the weak acids, followed by an acetonitrile gradient to elute the neutral compounds, and last a sodium methanesulfonate gradient to elute the anionic compounds using a superficially porous C18 column coupled with a strong anion exchange (SAX) column. Repeatability (RSD) in the retention times and peak areas of the analytes was less than 0.25 % and 1.5 %, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Silver nanoparticles (AgNPs) with different sizes have been extensively adopted in various commercial products, causing ecological concerns because of the inevitable release of AgNPs into the environment. Hence, understanding the interaction of different-sized AgNPs with environmental substances is important for assessing the environmental risk and fate of AgNPs. In this work, we investigated the impact of anions (NO 3 - , SO 4 2- , HCO 3 - /CO 3 2- , Cl - ) in aquatic environments on the physicochemical properties and antibacterial activity of different-sized AgNPs (20, 40 and 57 nm). The results showed that the anions whose corresponding silver-based products had lower solubility were more likely to decrease the zeta potential (more negative) of particles, inhibit the dissolution of AgNPs and reduce their antibacterial activity. This should be attributed to the easier generation of coating layers on the surface of AgNPs during the incubation process with such anions. Additionally, the generation of coating layers was also found to be particle-size dependent. The anions were more prone to adsorbing onto larger-sized AgNPs, promoting the formation of coating layers, subsequently resulting in more pronounced variations in the physicochemical properties and antibacterial activity of the larger-sized AgNPs. Therefore, larger-sized AgNPs were more prone to experiencing specific effects from the anions.

Mitochondrial uncoupling by small molecule protonophores is a promising strategy for developing novel anticancer agents. Recently, aryl urea substituted fatty acids (aryl ureas) were identified as a new class of protonophoric anticancer agents. To mediate proton transport these molecules self-assemble into membrane-permeable anionic dimers in which intermolecular hydrogen bonds between the carboxylate and aryl-urea anion receptor delocalise the negative charge across the aromatic π-system. In this work, we extend the aromatic π-system by introducing a second phenyl substituent to the aryl urea scaffold and compare the proton transport mechanisms and mitochondrial uncoupling actions of these compounds to their monoaryl analogues. It was found that incorporation of meta-linked phenyl substituents into the aryl urea scaffold enhanced proton transport in vesicles and demonstrated superior capacity to depolarise mitochondria, inhibit ATP production and reduce the viability of MDA-MB-231 breast cancer cells. In contrast, diphenyl ureas linked through a 1,4-distribution across the phenyl ring displayed diminished proton transport activity, despite both diphenyl urea isomers possessing similar binding affinities for carboxylates. Mechanistic studies suggest that inclusion of a second aryl ring changes the proton transport mechanism, presumably due to steric factors that impose higher energy penalties for dimer formation., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The present study utilizes molecular dynamics simulations to examine how different anions compete for protein solvation in aqueous solutions of ionic liquids (ILs). Ubiquitin is used as model protein and studied in IL mixtures sharing the same cation, 1-ethyl-3-methylimidazolium (EMIM), and two different anions in the same solution, from combinations of dicyanamide (DCA), chloride (Cl), nitrate (NO 3 ), and tetrafluoroborate (BF 4 ). Our findings reveal that specific interactions between anions and the protein are paramount in IL solvation, but that combinations of anions are not additive. For example, DCA exhibits a remarkable ability to form hydrogen bonds with the protein, resulting in a significantly stronger preferential binding to the protein than other anions. However, the combination of DCA with NO 3 , which also forms hydrogen bonds with the protein, results in a smaller preferential solvation of the protein than the combination of DCA with chloride ions, which are weaker binders. Thus, combining anions with varying affinities for the protein surface modulates the overall ion accumulation through nonadditive mechanisms, highlighting the importance of the understanding of competition for specific interaction sites, cooperative binding, bulk-solution affinity, and overall charge compensations, on the overall solvation capacity of the solution. Such knowledge may allow for the design of novel IL-based processes in biotechnology and material science, where fine-tuning protein solvation is crucial for optimizing performance and functionality.

Cytochrome P450 (P450, CYP) 19A1 is the steroid aromatase, the enzyme responsible for the 3-step conversion of androgens (androstenedione or testosterone) to estrogens. The final step is C-C bond scission (removing the 19-oxo group as formic acid) that proceeds via a historically controversial reaction mechanism. The two competing mechanistic possibilities involve a ferric peroxide anion (Fe 3+ O 2 - , Compound 0) and a perferryl oxy species (FeO 3+ , Compound I). One approach to discern the role of each species in the reaction is with the use of oxygen-18 labeling, i.e., from 18 O 2 and H 2 18 O of the reaction product formic acid. We applied this approach, using several technical improvements, to study the deformylation of 19-oxo-androstenedione by human P450 19A1 and of a model secosteroid, 3-oxodecaline-4-ene-10-carboxaldehyde (ODEC), by rabbit P450 2B4. Both aldehyde substrates were sensitive to non-enzymatic acid-catalyzed deformylation, yielding 19-norsteroids, and conditions were established to avoid issues with artifactual generation of formic acid. The Compound 0 reaction pathway predominated (i.e., Fe 3+ O 2 - ) in both P450 19A1 oxidation of 19-oxo-androstenedione and P450 2B4 oxidation of ODEC. The P450 19A1 results contrast with our prior conclusions (J. Am. Chem. Soc. 2014, 136, 15016-16025), attributed to several technical modifications., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Compact polyelectrolyte complexes (CoPECs) can exhibit mechanical properties similar to those of biological tissues and other interesting properties, such as self-healing. To date, a variety of CoPECs prepared from synthetic polyelectrolytes have been investigated, but there are very few examples based entirely on biopolymers. We describe here an investigation of CoPECs based on poly(l-lysine) (PLL) with sodium hyaluronate (HA) and alginate (Alg). A 2:1 ratio of cation:anion and 0.25 M NaBr was beneficial for the formation of viscoelastic PLL-HA CoPECs, with the favorable ratio attributed to the spacing of carboxylates on HA being one every two saccharide units. In contrast, 1.0 M NaBr and a 1:1 ratio were better for PLL-Alg CoPECs. Both CoPECs swelled or retained a constant volume when immersed in hypertonic media, but contracted in hypotonic media. The loading of molecules into the PLL-HA (2:1) CoPECs was investigated. Higher loadings were achieved for anionic molecules compared to cations, presumably due to the excess cationic binding sites on the networks. The times required for full release of the molecules ranged from less than 2 h for neutral paracetamol to about 48 h for crystal violet and diclofenac.

Control of phosphate capture and release is vital in environmental, biological, and pharmaceutical contexts. However, the binding of trivalent phosphate (PO 4 3- ) in water is exceptionally difficult due to its high hydration energy. Based on the anion coordination chemistry of phosphate, in this study, four charge-neutral tripodal hexaurea receptors (L 1 -L 4 ), which were equipped with morpholine and polyethylene glycol terminal groups to enhance their solubility in water, were synthesized to enable the pH-triggered phosphate binding and release in aqueous solutions. Encouragingly, the receptors were found to bind PO 4 3- anion in a 1 : 1 ratio via hydrogen bonds in 100 % water solutions, with L 1 exhibiting the highest binding constant (1.2×10 3  M -1 ). These represent the first neutral anion ligands to bind phosphate in 100 % water and demonstrate the potential for phosphate capture and release in water through pH-triggered mechanisms, mimicking native phosphate binding proteins. Furthermore, L 1 can also bind multiple bioavailable phosphate species, which may serve as model systems for probing and modulating phosphate homeostasis in biological and biomedical researches., (© 2024 Wiley-VCH GmbH.)

Progress in the development of biodegradable or biobased ionic liquids (ILs) has led to the design of green compounds for several applications. Herein, four biocompatible dicationic ionic liquids (DILs) with ammonium-phosphonium cations and amino acid anions were synthesized and investigated their environmental impact. The structures of the DILs were confirmed by spectral analyses ( 1 H, 13 C and 31 P NMR). Furthermore, physicochemical properties such as density, viscosity and refractive index were determined. Water content, bromide content and solubility were thereafter determined as the parameters needed for further studies. Subsequently, their antifeedant activity towards economically important pests of grain in storage warehouses: the granary weevil, the confused flour beetle, and the khapra beetle was examined, showing the dependence on structure. Moreover, selected DILs were investigated for toxicity towards white mustard, Daphnia magna, and Artemia franciscana to specify the environmental impact. These studies were complemented by understand the biodegradation of DILs by bacterial communities derived from soil at the agricultural land. The result was DILs with limited environmental footprints that have great potential for further application studies., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Damian K. Kaczmarek reports financial support was provided by National Science Centre Poland. Damian Krystian Kaczmarek has patent pending to P.443203. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Sample multiplexing-based proteomic strategies rely on fractionation to improve proteome coverage. Tandem mass tag (TMT) experiments, for example, can currently accommodate up to 18 samples with proteins spanning several orders of magnitude, thus necessitating fractionation to achieve reasonable proteome coverage. Here, we present a simple yet effective peptide fractionation strategy that partitions a pooled TMT sample with a two-step elution using a strong anion-exchange (SAX) spin column prior to gradient-based basic pH reversed-phase (BPRP) fractionation. We highlight our strategy with a TMTpro18-plex experiment using nine diverse human cell lines in biological duplicate. We collected three data sets, one using only BPRP fractionation and two others of each SAX-partition followed by BPRP. The three data sets quantified a similar number of proteins and peptides, and the data highlight noticeable differences in the distribution of peptide charge and isoelectric point between the SAX partitions. The combined SAX partition data set contributed 10% more proteins and 20% more unique peptides that were not quantified by BPRP fractionation alone. In addition to this improved fractionation strategy, we provide an online resource of relative abundance profiles for over 11,000 proteins across the nine human cell lines, as well as two additional experiments using ovarian and pancreatic cancer cell lines.

The simultaneous removal of anionic and cationic heavy metals presents a challenge for adsorbents. In this study, acetate (Ac-) was utilized as the intercalating anion for layered double hydroxide (LDH) to prepare a novel biochar composite adsorbent (Ac-LB) designed for the adsorption of Pb(II), Cu(II), and As(V). By utilizing Ac- as the intercalating anion, the interlayer space of the LDH was enlarged from 0.803 nm to 0.869 nm, exposing more adsorption sites for the LDH and enhancing the affinity for heavy metals. The results of the adsorption experiments showed that the adsorption effect of Ac-LB on heavy metals was significantly improved compared to the original FeMg-LDH modified biochar composites (LB), and the maximum adsorption capacity of Pb(II), Cu(II), and As(V) were 402.70, 68.50, and 21.68 mg/g, respectively. Wastewater simulation tests further confirmed the promising application of Ac-LB for heavy metal adsorption. The analysis of the adsorption mechanism revealed that surface complexation, electrostatic adsorption, and chemical deposition were the main mechanisms of action between heavy metals (Pb(II) and Cu(II)) and Ac-LB. Additionally, Cu(II) ions underwent a homogeneous substitution reaction with Ac-LB. The adsorption process of As(V) by Ac-LB mainly relied on complexation and ion-exchange reactions. Lastly, the modification of the LDH structure by Ac - as an intercalating anion, thereby increasing the affinity for heavy metals, was further illustrated using density-functional theory (DFT) calculations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In this study, a novel adsorbent, A-PEI/CS-Cu 2+ , was developed by crosslinking polyethyleneimine/chitosan hydrogel with acrolein and loading it with copper ions. The adsorption process of A-PEI/CS-Cu 2+ on the anionic dye acid yellow 36 (AY36) was investigated by kinetic, isothermal and thermodynamic modeling. It was noteworthy that A-PEI/CS-Cu 2+ exhibited rapid adsorption with a 90 % removal rate achieved within just 5 min, which was much faster than the adsorption rate of A-PEI/CS without load of copper ions and showed its potential for rapid adsorption applications. The maximum adsorption capacity for AY36 could reach up to 3114 mg g -1 . In addition, the high concentration of saline wastewater was found to have almost no effect on the adsorption reaction in the salt effect test experiment. In five desorption-regeneration cycle experiments, the sample exhibited good recyclability and regeneration performance. The driving force of the adsorption process mainly originated from the electrostatic interaction, hydrogen bonding, and intermolecular interaction, in which the addition of copper ions led to the enhancement of the electrostatic interaction and chelation between A-PEI/CS-Cu 2+ and AY36. Overall, the findings suggest the excellent potential of A-PEI/CS-Cu 2+ for rapid and efficient adsorption, as well as its suitability for practical applications in wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The applications of polysaccharides as emulsifiers are limited due to the lack of hydrophobicity. However, traditional hydrophobic modification methods used for polysaccharides are complicated and involve significant mechanical and thermal losses. In this study, soy hull polysaccharide (SHP) and terminally aminopropylated polydimethylsiloxane (NPN) were selected to investigate the feasibility of a simple and green interfacial membrane strengthening strategy based on the interfacial polymerization of anionic polysaccharides and fat-soluble alkaline ligands. Our results show that deprotonated SHP and protonated NPN can be complexed at the water/oil (W/O) interface, reduce interfacial tension, and form a strong membrane structure. Moreover, they can quickly form a membrane at the W/O interface upon the moment of contact to produce stable all-liquid printing products with complex patterns. However, the molecular weight of NPN affects the complexation reaction. Consequently, this study has long-term implications to expanding the areas of application for anionic polysaccharides., Competing Interests: Declaration of competing interest The authors have declared no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In the present study, one mononuclear Cu(II) [CuL(SCN)] (1) and one mononuclear Co(II) [CoLN 3 ] (2) complexes, with a Schiff base ligand (HL) formed by condensation of 2-picolylamine and salicylaldehyde, have been successfully developed and structurally characterized. The square planer geometry of both complexes is fulfilled by the coordination of one deprotonated ligand and one ancillary ligand SCN - (1) or N 3 - (2) to the metal centre. Binding affinities of both complexes with deoxyribonucleic acid (DNA) and human serum albumin (HSA) are investigated using several biophysical and spectroscopic techniques. High values of the macromolecule-complex binding constants and other results confirm the effectiveness of both complexes towards binding with DNA and HSA. The determined values of the thermodynamic parameters support spontaneous interactions of both complexes with HSA, while fluorescence displacement and DNA melting studies establish groove-binding interactions with DNA for both complexes 1 and 2. The molecular modelling study validates the experimental findings. Both complexes are subjected to an MTT test establishing the anticancer property of complex 1 with lower risk to normal cells, confirmed by the IC50 values of the complex for HeLa cancer cells and HEK normal cells. Finally, a nuclear staining analysis reveals that the complexes have caused apoptotic cell death., Competing Interests: Declaration of competing interest There are no conflicts of interest to mention., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The oxidation of tetraselenatetracene (TSeT) by tetracyanoquinodimethane in the presence of dysprosium(III) tris(hexafluoroacetylacetonate), Dy III (hfac) 3 , produces black crystals of {TSeT 1.5 } ●+ [Dy III (hfac) 4 ] - ( 1 ) salt, which combines conducting and magnetic sublattices. It contains one-dimensional stacks composed of partially oxidized TSeT molecules (formal averaged charge is +2/3). Dimers and monomers can be outlined within these stacks with charge and spin density redistribution. The spin triplet state of the dimers is populated above 128 K with an estimated singlet-triplet energy gap of 542 K, whereas spins localized on the monomers show paramagnetic behavior. A semiconducting behavior is observed for 1 with the activation energy of 91 meV (measured by the four-probe technique for an oriented single crystal). The Dy III ions coordinate four hfac - anions in [Dy III (hfac) 4 ] - , providing D 2d symmetry. Slow magnetic relaxation is observed for Dy III under an applied static magnetic field of 1000 Oe, and 1 is a single-ion magnet (SIM) with spin reversal barrier U eff = 40.2 K and magnetic hysteresis at 2 K. Contributions from Dy III and TSeT ●+ paramagnetic species are seen in EPR. The Dy III ion rarely manifests EPR signals, but such signal is observed in 1 . It appears due to narrowing below 30 K and has g 4 = 6.1871 and g 5 = 2.1778 at 5.4 K.

The expanding horizon of diagnostic and therapeutic applications involving nucleic acids (NA) requires novel tools for purification, including minimal sample preparation. In this work, thin-film microextraction devices featuring five poly ionic sorbents were examined as anion exchange extraction phases for the rapid purification of NAs. Each sorbent is composed of a nonionic cross-linker and a methacrylate monomer containing a core tetra-alkyl ammonium moiety with an alkyl, anionic, or cationic residue. Extraction devices were produced through the application of the prepolymer sorbent mixture onto a functionalized nitinol metal support followed by photoinduced free-radical polymerization. The miniaturized extraction devices (10 mm × 3.5 mm) were directly immersed into aqueous samples to isolate NAs via electrostatic interactions with the polycation. The ammonium methacrylate (AMA) monomer containing a propyl trimethylammonium group (AMA-C 3 N(CH 3 ) 3 ) exhibited the highest affinity for DNA, with 80 ± 10% of DNA being isolated. Recovery of DNA from the sorbents required the introduction of ions in an aqueous solution to exchange the anionic biopolymer from the polycationic moiety. An investigation of three anion species revealed that the AMA-C 3 N(CH 3 ) 3 sorbent showed the highest recoveries, with the perchlorate anion producing a preconcentration factor of 4.36 ± 0.86 while requiring only 250 mM NaClO 4 . A directly compatible quantitative polymerase chain reaction assay was developed to quantify the recovery of spiked DNA with lengths of 830, 204, and 98 base pairs in heat-treated human plasma. The AMA-C 3 N(CH 3 ) 3 sorbent was uninhibited by the complex human plasma matrix and enabled high preconcentration factors for the spiked DNA at a biologically relevant concentration of 10 pg/mL. While Qiagen's circulating cell-free DNA MinElute extraction kit enabled higher preconcentration of all analytes, the methodology described in this work requires fewer steps, less user intervention, and minimal equipment requirements to isolate DNA, making it more amenable for high-throughput and low resource applications.

The new water-soluble di-anionic bi-sodium salt of tetracycline (TC), an antibiotic in clinical use, with the formula {[TC] 2- [Na + (MeOH)(H 2 O)] [Na + ]·(H 2 O)} n (TCNa) was synthesized. The compound was characterized by m.p., attenuated total reflectance-Fourier transform infra-red (ATR-FTIR) spectroscopy, and ultraviolet (UV) and proton nuclear magnetic resonance ( 1 H NMR) spectroscopy in the solid state and in solution. The molecular weight (MW) was determined by cryoscopy. The crystal structure of TCNa was also determined by X-ray crystallography. The antibacterial activity of TCNa was evaluated against the bacterial species Pseudomonas aeruginosa ( P. aeruginosa ), Escherichia coli ( E. coli ), Staphylococcus epidermidis ( S. epidermidis ) and Staphylococcus aureus ( S. aureus ) by means of minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and inhibition zones (IZs). Moreover, the ability of the compound to eradicate biofilm formation was also evaluated. The results are compared with those obtained for the commercially available drug TCH2. The in vitro and in vivo toxicities of TCNa were tested against human corneal epithelial cells (HCECs) and Artemia salina .

Alzheimer's disease (AD) is a multifactorial and fatal neurodegenerative disorder. Acetylcholinesterase (AChE) plays a key role in the regulation of the cholinergic system and particularly in the formation of amyloid plaques; therefore, the inhibition of AChE has become one of the most promising strategies for the treatment of AD, particularly concerning AChE inhibitors that interact with the peripheral anionic site (PAS). Ceanothic acid isolated from the Chilean Rhamnaceae plants is an inhibitor of AChE through its interaction with PAS. In this study, six ceanothic acid derivatives were prepared, and all showed inhibitory activity against AChE. The structural modifications were performed starting from ceanothic acid by application of simple synthetic routes: esterification, reduction, and oxidation. AChE activity was determined by the Ellmann method for all compounds. Kinetic studies indicated that its inhibition was competitive and reversible. According to the molecular coupling and displacement studies of the propidium iodide test, the inhibitory effect of compounds would be produced by interaction with the PAS of AChE. In silico predictions of physicochemical properties, pharmacokinetics, drug-likeness, and medicinal chemistry friendliness of the ceanothane derivatives were performed using the Swiss ADME tool.

The effect of aqueous solution chemistry on the ionic hydration structure and its corresponding nanofiltration (NF) selectivity is a research gap concerning ion-selective transport. In this study, the hydration distribution of two typical monovalent anions (Cl - and NO 3 - ) under different aqueous solution chemical conditions and the corresponding transmembrane selectivity during NF were investigated by using in situ liquid time-of-flight secondary ion mass spectrometry in combination with molecular dynamics simulations. We demonstrate the inextricable link between the ion hydration structure and the pore steric effect and further find that ionic transmembrane transport can be regulated by breaking the balance between the hydrogen bond network (i.e., water-water) and ion hydration (i.e., ion-water) interactions of hydrated ion. For strongly hydrated (H 2 O) n Cl - with more intense ion-water interactions, a higher salt concentration and coexisting ion competition led to a larger hydrated size and, thus, a higher ion rejection by the NF membrane, whereas weakly hydrated (H 2 O) n NO 3 - takes the reverse under the same conditions. Stronger OH - -anion hydration competition resulted in a smaller hydrated size of (H 2 O) n Cl - and (H 2 O) n NO 3 - , showing a lower observed average hydration number at pH 10.5. This study deepens the long-overlooked understanding of NF separation mechanisms, concerning the hydration structure.

In this work, a novel magnetic covalent organic framework (COF (TpPa-NH 2 ) @ Fe 3 O 4 ) was prepared via two step by simple solvent method for the extraction of anionic azo dye residues in food. The as-prepared COF (TpPa-NH 2 ) @ Fe 3 O 4 nanocomposite was characterised by scanning electron microscope, transmission electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction and vibrating sample magnetometer. Before high-performance liquid chromatography with ultraviolet detection (HPLC-UV) determination, it was used as magnetic adsorbent for magnetic solid-phase extraction (MSPE) to extract and pre-concentrate three anionic azo dyes in carbonated beverage samples. The several key extraction and desorption parameters affecting the extraction recovery rate were investigated, including extraction time, pH of the solution, amount of material, adsorption time, elution solvent, pH of elution solvent, type of elution solvent, elution volume and elution time. Under optimised conditions, this method has good linearity between 5 and 500 μg L -1 (correlation coefficient > 0.9986). The limit of detection was 2.3-3.4 μg L -1 . The recoveries of the samples were between 87.5 and 96.9%, and the relative standard deviation lower than 4.6%. The developed method has broad application prospects for the analysis of anionic azo dyes in carbonated beverages., (© 2024. The Author(s), under exclusive licence to The Japan Society for Analytical Chemistry 2024.)

Conductive hydrogels play a crucial role in advancing technologies like implantable bioelectronics and wearable electronic devices, owing to their favorable conductivity and appropriate mechanical properties. Here, a novel bottom-up approach is reported for crafting conductive nanocomposite hydrogels to achieve enhancing conductive and mechanical properties. In this approach, new poly(ɛ-caprolactone)-based block copolymers with sulfonic groups are first synthesized and self-assembled into uniform polyanionic nanoplatelets. Subsequently, these negatively charged nanoplatelets, with sulfonic groups on the surface, are employed as nanoadditives for the polymerization of 3,4-ethylenedioxythiophene (EDOT), resulting in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/nanoplatelet complex with 3.8 times enhanced electrical conductivity compared with their counterparts prepared using block copolymers (BCPs). Blending the (PEDOT:PSS)/nanoplatelet complex with calcium alginate, nanocomposite hydrogels are successfully prepared. In comparison with hydrogels with (PEDOT:PSS)/BCP complexes prepared by a top-down method, the nanocomposite hydrogels are found to show twice as strong mechanical strength and 1.6 times higher conductivity. This work provides valuable insights into the bottom-up construction of conductive hydrogels for bioelectronics using well-controlled polymeric nanoplatelets., (© 2024 Wiley‐VCH GmbH.)

Dye wastewater poses a serious threat to the environment and human health, necessitating sustainable degradation methods. In this study, Na-based Montmorillonite (MMT) was exfoliated using different ionic liquids ([C16MIM][Cl], [C16MIM][BF 4 ], [C16MIM][PF 6 ]), and silver nanoparticles (Ag NPs) were green-synthesized using hydroxypropyl cellulose (HPC). The HPC significantly enhanced the dispersion of MMT in the hydrogel. By introducing lauryl methacrylate (LMA), a hydrophobic associative network was constructed in PAM/LMA/HPC/MMT@ILs&Ag NPs hydrogel. This hydrogel demonstrated outstanding mechanical properties, with a stress of 833.21 kPa, strain of 3300 %, and toughness of 14.36 MJ/m 3 . It also exhibited excellent catalytic activity, with a rate constant of 0.83 min -1 for 4-nitrophenol degradation at 28 °C. The effects of temperature and catalyst concentration on the catalytic reaction were systematically investigated. This study presents a simple green synthesis approach for Ag NPs using HPC, achieving superior mechanical performance and stable MMT dispersion in aqueous solutions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence., (Copyright © 2024. Published by Elsevier B.V.)

Paper-based test film material is widely used in a variety of test instruments for different applications. The enzyme activity test paper sheet is one of the most popularly used test papers. Here we present a novel fabrication of paper-based enzyme activity test paper without cationic resin added in. The chemical pulping fibers were first beaten to different degrees (from 14.6 to 41.5°SR) with a PFI beater. After that, the fibers were modified with a cationic agent (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) under the system of alkali and water solution. Finally, the test papers were made with the modified fiber by a regular paper former in lab. The results showed that beating is beneficial for the improvement of the cationization reaction which is indicated by the Zeta potential, FTIR and EDS. The main mechanisms involved are the destruction of crystalline zone, increase of free hydroxyl group and defibrillation. This hypothesis was supported by the SEM, XRD and fiber analyzer. Beating under the optimized condition, the wet strength and liquid absorbability of test paper can meet the application requirement, and the test results of enzyme activity are quite close to those of commercial test papers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Understanding oligomerization and aggregation of the amyloid-β protein is important to elucidate the pathological mechanisms of Alzheimer's disease, and lipid membranes play critical roles in this process. In addition to studies reported by other groups, our group has also reported that the negatively-charged lipid bilayers with a high positive curvature induced α-helix-to-β-sheet conformational transitions of amyloid-β-(1-40) upon increase in protein density on the membrane surface and promoted amyloid fibril formation of the protein. Herein, we investigated detailed mechanisms of the conformational transition and oligomer formation of the amyloid-β protein on the membrane surface. Changes in the fractions of the three protein conformers (free monomer, membrane-bound α-helix-rich conformation, and β-sheet-rich conformation) were determined from the fluorescent spectral changes of the tryptophan probe in the protein. The helix-to-sheet structural transition on the surface was described by a thermodynamic model of octamer formation driven by entropic forces including hydrophobic interactions. These findings provide useful information for understanding the self-assembly of amyloidogenic proteins on lipid membrane surfaces., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Anthraquinones constitute an important class of compounds with wide applications. The solubility of derivatives at 298.15 K was discussed in ethanol-water solution and at atmospheric pressure, the solubility of 1-amino-4-hydroxy-9,10-anthraquinone (AHAQ) in binary solvents (ethanol-water combinations) was determined. Colour strength and fastening properties depend upon the kind and position of a hydrophobic group connected to the phenoxy ring of Anthraquinone moiety. There is a continuing interest in the creation of novel anthraquinone derivatives with biological activities since they have demonstrated potential for treating multiple sclerosis. For this purpose, by utilizing voltammetric and absorption studies, interactions of various derivatives with calf thymus DNA (ct-DNA) and the cationic surfactant cetyltrimethylammoniumbromide (CTAB) were examined. Here prominent Hydrophobic interaction and electron transfer resulting in binding to CTAB micelles were observed. The polarity index of the media was assessed and associated with the electrochemical parameters. The medicinal behaviour of Anthraquinone derivatives was a result of electron transfer reactions with DNA. UV-Visible and fluorescence properties were due to the transitions between n* and π* orbitals. Large absorption band with low dichroic ratio was characteristic of various derivatives of Anthraquinone. Presence of -NH group proves various derivatives remarkable calorimetric and anionic sensors., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Epinephrine (EP) is an essential catecholamine in the human body. Currently, most EP detection methods are not suitable for in vivo detection due to material limitations. An organic small molecule fluorescent probe based on a chemical cascade reaction for the detection of EP was designed. Anionic heptamethine cyanine dye was selected as a fluorescent dye because of its NIR fluorescence emission with excellent biocompatibility. The secondary amine of EP nucleophilically attacks the carbonate of the probe with its stronger nucleophilicity and further undergoes intramolecular nucleophilic cyclization to release the fluorophore. Other substances containing only primary amines or no β-OH lack reaction competitiveness due to their weaker nucleophilicity or inability to undergo further cyclization. The fluorescence recovery of the probe was linearly related to the EP concentration of 2-75 μmol/L. The detection limit was 0.4 μmol/L. The recovery rate was 94.78-111.32%. Finally, we successfully achieved bioimaging of EP in living cells and EP analogue in nematodes.

The simultaneous discrimination and detection of multiple anions in an aqueous solution has been a major challenge due to their structural similarity and low charge radii. In this study, we have constructed a supramolecular fluorescence sensor array based on three host-guest complexes to distinguish five anions (F - , Cl - , Br - , I - , and ClO - ) in an aqueous solution using anionic-induced fluorescence quenching combined with linear discriminant analysis. Due to the different affinities of the three host-guest complexes for each anion the anion quenching efficiency for each host-guest complex was likewise different, and the five anions were well recognized. The fluorescence sensor array not only distinguished anions at different concentrations (0.5, 10, and 50 µM) with 100% accuracy but also showed good linearity within a certain concentration range. The limit of detection (LOD) was < 0.5 µM. Our interference study showed that the developed sensor array had good anti-interference ability. The practicability of the developed sensor array was also verified by the identification and differentiation of toothpaste brands with different fluoride content and the prediction of the iodine concentration in urine combined with machine learning., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Dyes pollution is well known for their hazardous impacts on human health and the environment. The removal of dyes from wastewater has become an important issue. In this study, magnetic micrometer-sized particles AL-CTS@MNPs were synthesized from alkaline lignin (AL) and chitosan (CTS) by "one-pot method". The adsorbent presented higher selectivity adsorption effect on anionic dyes than amphoteric and cationic dyes, and even no adsorption effect on cationic methylene blue (MB), which showed that the anionic dyes could be better separated from the other two types of dyes. The adsorption isotherms of the dyes were highly consistent with the Langmuir model, and the maximum adsorption capacity was 329.50 mg/g for methyl orange (MO) and 20.00 mg/g for rhodamine B (RhB). AL-CTS@MNPs showed good adsorption of anionic dyes (MO) in the pH range of 3-9. Meanwhile, the adsorbent AL-CTS@MNPs were also characterized, showing rough surface with specific surface areas of 37.38 m 2 /g, pore diameter of 95.8 nm and porosity of 17.62 %. The particle sizes were ranged from 800 μm to 1300 μm. The electrostatic attraction and π-π* electron donor-acceptor interactions were the main forces between the adsorbent and anionic dyes. While the electrostatic repulsive force between the adsorbent and the cationic dyes resulted in the non-absorption of MB by AL-CTS@MNPs. Subsequently, the adsorbent maintained a removal rate of >95 % after five adsorption-desorption cycles, demonstrating its excellent stability and recoverability. Ultimately, the prepared AL-CTS@MNPs illuminated good prospect on complex components dyes wastewater treatment., Competing Interests: Declaration of competing interest The authors declare no competing financial interest. The co-authors have reviewed the manuscript and approved it for submission to this journal for consideration., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The development of bifunctional hybrid materials based on natural clays and layered double hydroxide (LDH) and their application on the simultaneous adsorption of Cd(II) and As(V) was investigated in this work. Two different synthesis routes, in situ and assembly, were employed to obtain the hybrid materials. Three types of natural clays, namely bentonite (B), halloysite (H), and sepiolite (S), were used in the study. These clays are characterized by a laminar, tubular, and fibrous structural arrangement, respectively. The physicochemical characterization results indicate that the hybrid materials were formed through interactions between the Al-OH and Si-OH groups present in the natural clays, and the Mg-OH and Al-OH groups present in the LDH for both synthesis routes. However, the "in situ" route yields a more homogenous material because the LDH formation is performed on the natural clay surface. The hybrid materials showed an anion and cation exchange capacity up to 200.7 meq/100 g and an isoelectric point near 7. The arrangement of natural clay has no impact on the properties of hybrid material but influences the adsorption capacity. The adsorption of Cd(II) onto hybrid materials was enhanced in comparison with natural clays, obtaining adsorption capacities of 80, 74, 65, and 30 mg/g for 15:1 (LDH:H) INSITU , 1:1 (LDH:S) INSITU , 1:1 (LDH:B) INSITU , and 1:1 (LDH:H) INSITU , respectively. The adsorption capacities of hybrid materials to adsorb As(V) were between 20 and 60 μg/g. The 15:1 (LDH:H) INSITU sample showed the best adsorption capacity being ten folds greater than halloysite and LDH. In all cases, the hybrid materials showed a synergistic effect for Cd(II) and As(V) adsorption. The adsorption study of Cd(II) onto hybrid materials showed that the primary adsorption mechanism is cation exchange between the interlayer cations in natural clay and Cd(II) in the aqueous solution. The adsorption of As(V) showed that the adsorption mechanism is attributed to anion exchange between CO 2 3- in the interlayer space of LDH and H 2 ASO 4 - in the solution. The simultaneous adsorption of As (V) and Cd (II) shows that, during the As(V) adsorption, there is no competition by the adsorption sites. Still, the adsorption capacity towards Cd(II) was enhanced 1.2-folds. This study ultimately revealed that the arrangement of clay has a significant influence on the adsorption capacity of the hybrid material. This can be attributed to the similar morphology between the hybrid material and natural clays, as well as the important diffusion effects observed in the system., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Generally, the pH of fluorinated groundwater or many industrial wastewater is neutral, while the majority of metal-modified adsorbents can work efficiently only under acidic conditions. In this study, we synthesized a novel hybrid adsorbent, Mg-Zr-D213, by loading nano-Mg/Zr binary metal (hydrogen) oxides in a strong-base anion exchanger, D213, to enhance the adsorption of fluoride from neutral water. Mg-Zr-D213 exhibited a better fluoride-removal capacity in neutral water than monometallic modified resins. Under the interference of competing anions and coexisting organic acids, Mg-Zr-D213 exhibited superior selectivity. The Langmuir model indicated that the fitted maximum sorption capacity of Mg-Zr-D213 was 41.38 mg/g. The results of column experiments showed that the effective treatment volume of Mg-Zr-D213 was 8-16-times higher than that of D213 for both synthetic groundwater and actual industrial wastewater, and that NaOH-NaCl eluent could effectively recover more than 95% of fluoride. Adsorption experiments with Mg/Zr metal (hydrogen) oxide particles and D213 separately demonstrated a synergistic effect between -N + (CH 3 ) 3 and Mg/Zr metal (hydrogen) oxide particles. The ligand exchange or metal-ligand interaction of Mg/Zr metal (hydrogen) oxide particles on fluoride was further demonstrated via X-ray photoelectron spectroscopy. Overall, Mg-Zr-D213 has great potential for enhanced fluoride removal in neutral water., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Since the potential carcinogenic, toxic and non-degradable dyes trigger serious environmental contamination by improper treatment, developing novel adsorbents remains a major challenge. A novel high efficiency and biopolymer-based environmental-friendly adsorbent, chitosan‑sodium tripolyphosphate-melamine sponge (CTS-STPP-MS) composite, was prepared for Orange II removing with chitosan as raw material, sodium tripolyphosphate as cross-linking agent. The composite was carefully characterized by SEM, EDS, FT-IR and XPS. The influence of crosslinking conditions, dosage, pH, initial concentration, contacting time and temperature on adsorption were tested through batch adsorption experiments. CTS-STPP-MS adsorption process was exothermic, spontaneous and agreed with Sips isotherm model accompanying the maximum adsorption capacity as 948 mg∙g -1 (pH = 3). Notably, the adsorption performance was outstanding for high concentration solutions, with a removal rate of 97 % in up to 2000 mg∙L -1 OII solution (100 mg sorbent dosage, 50 mL OII solution, pH = 3, 289.15 K). In addition, the adsorption efficiency yet remained 97.85 % after 5 repeated adsorption-desorption cycles. The driving force of adsorption was attributed to electrostatic attraction and hydrogen bonds which was proved by adsorption results coupled with XPS. Owing to the excellent properties of high-effective, environmental-friendly, easy to separate and regenerable, CTS-STPP-MS composite turned out to be a promising adsorbent in contamination treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The structural stability and therapeutic activity of Stem Bromelain (BM) have been explored by unravelling the interaction of stem BM in presence of two different types of anionic surfactants namely, bile salts, NaC and NaDC and the conventional anionic surfactants, SDDS and SDBS, below, at and above the critical micelle concentration (cmc) in aqueous phosphate buffer of pH 7. Different physicochemical parameters like, surface excess (Γ cmc ), minimum area of surfactants at air water interface (A min ) etc. are calculated from tensiometry both in absence and presence of BM. Several inflection points (C 1 , C 2 and C 3 ) have been found in tensiometry profile of surfactants in presence of BM due to the conformational change of BM assisted by surfactants. Similar observation also found in isothermal titration calorimetry (ITC) profiles where the enthalpy of micellization (ΔH 0 obs ) of surfactants in absence and presence of BM have calculated. Further, steady state absorption and fluorescence spectra monitoring the tryptophan (Trp) emission of free BM and in presence of all the surfactants at three different temperatures (288.15 K, 298.15 K, and 308.15 K) reveal the nature of fluorescence quenching of BM in presence of bile salts/surfactants. Time resolved fluorescence studies at room temperature also support to determine the several quenching parameters. The binding constant (K b ) of BM with all the surfactants and free energy of binding (∆G 0 of bile salts/surfactants with BM at different temperatures have been calculated exploiting steady state fluorescence technique. It is observed that, the binding of NaC with BM is greater as compared to other surfactants while Stern-Volmer quenching constant (K SV ) is found greater in presence of SDBS as compared with others which supports the surface tension and ITC data with the fact that surface activity of surfactant(s) is decreasing with the binding of the surfactants at the core or binding pocket of BM. Circular Dichroism (CD) study shows the stability of secondary structure of BM in presence of NaC and NaDC below C 3 , while BM lost its structural stability even at very low surfactant concentration of SDDS and SDBS which also supports the more involvement of bile salts in binding rather than surfactants. The molecular docking studies have also been substantiated for better understanding the several experimental investigations interaction of BM with the bile salts/surfactants., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Targeting the homeostasis of anions and iron has emerged as a promising therapeutic approach for the treatment of cancers. However, single-targeted agents often fall short of achieving optimal treatment efficacy. Herein we designed and synthesized a series of novel dual-functional squaramide-hydroxamic acid conjugates that are capable of synergistically modulating the homeostasis of anions and iron. Among them, compound 16 exhibited the most potent antiproliferative activity against a panel of selected cancer cell lines, and strong in vivo anti-tumor efficacy. This compound effectively elevated lysosomal pH through anion transport, and reduced the levels of intracellular iron. Compound 16 could disturb autophagy in A549 cells and trigger robust apoptosis. This compound caused cell cycle arrest at the G1/S phase, altered the mitochondrial function and elevated ROS levels. The present findings clearly demonstrated that synergistic modulation of anion and iron homeostasis has high potentials in the development of promising chemotherapeutic agents with dual action against cancers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Hollow vesicles are promising in water treatment due to their unique structure of the membrane and inner cavity. However, the adsorption capacity needs to be improved for targeted pollutants. Herein, millimeter-scale hollow vesicles were prepared with a one-step process of sequential stirring and grafting using chitosan, diallyldimethylammonium chloride, and sodium alginate as raw materials with the purpose of efficient removal of anionic dyes from wastewater. The composite vesicles were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The hollow vesicles showed the structure of the cationic membrane and the inner cavity, facilitating the dye adsorption. The adsorption capacity for the anionic dye Reactive Black 5 reached 698.1 mg/g, more than twice that of the binary composite vesicles without graft. The adsorption kinetics and isotherm data coincided with the pseudo-second-order and Langmuir models, respectively, and the adsorption mechanism was monolayer chemisorption. Moreover, the vesicles worked well in wide ranges of environment pH, temperature, and co-existing pollutants. They also possessed excellent cyclic regeneration performance, in which 93 % of the initial adsorption capacity was maintained after four cycles. These results indicate that the millimeter-scale hollow vesicles exhibit broad application prospects for wastewater purification., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Xuejun Wang reports financial support was provided by Department of Science & Technology, Shandong Province, China. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The existence of microplastics (MPs) in water is a significant global concern since they have the potential to pose a threat to human health. Therefore, there is a need to develop a sustainable treatment technology for MPs removal, as the conventional methods are inadequate to address this problem. Coagulation is a typical process in treatment plants that can capture MPs before releasing them into the environment. In this work, the removal behaviors of polyamide (PA), polystyrene (PS), and polyethylene (PE) MPs were systematically investigated through coagulation processes using aluminum sulfate (Al 2 (SO 4 ) 3 ) and Moringa oleifera (MO) seeds extract. Subsequently, the coagulation performance of Al 2 (SO 4 ) 3 was improved by the separate addition of anionic polyacrylamide (APAM) and naturally derived MO. Results showed that Al 2 (SO 4 ) 3 in combination with APAM had better performance than Al 2 (SO 4 ) 3 or MO alone. In the Al 2 (SO 4 ) 3 +APAM system, the removal efficiencies were 93.47%, 81.25%, and 29.48% for PA, PS, and PE MPs, respectively. Furthermore, the effectiveness of the Al 2 (SO 4 ) 3 and MO blended system was approximately similar to the Al 2 (SO 4 ) 3 +APAM system. However, the required amount of Al 2 (SO 4 ) 3 was decreased to 50% in the Al 2 (SO 4 ) 3 +MO system compared to the optimal dosage in the Al 2 (SO 4 ) 3 system alone. The combination of 40 mg/L of Al 2 (SO 4 ) 3 and 60 mg/L of MO resulted in removal efficiencies of 92.99%, 80.48%, and 28.94% for PA, PS, and PE MPs, respectively. The high efficacy of these enhanced methods was due to the synergic effects of charge neutralization and agglomeration adsorption, which were validated through zeta potential assessments and visual analysis using scanning electron microscopy (SEM) images. In the case of experimental conditions, initial pH had little impact on removal efficiency, while NaCl salinity and stirring speed directly affected MPs removal. Consequently, this research took a step toward finding a green strategy to remove MPs from water systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Biomass chitosan has garnered considerable interest for alkaline anion exchange membranes (AEMs) due to its eco-friendly and sustainable characteristics, low reactant permeability and easily modifiable nature, but it still faces the trade-off between high hydroxide conductivity and sufficient mechanical properties. Herein, a novel functionalized attapulgite clay (f-ATP) with a unique ionic "chain-ball" surface structure was prepared and incorporated with quaternized chitosan (QCS)/polyvinyl alcohol (PVA) matrix to fabricate high-performance composite AEMs. Due to the strengthened interfacial bonding between f-ATP nanofillers and the QCS/PVA matrix, composite membranes are synergistically reinforced and toughened, achieving peak tensile strength and elongation at break of 24.62 MPa and 33.8 %. Meanwhile, abundant ion pairs on f-ATP surface facilitate ion transport in the composite AEMs, with the maximum OH - conductivity of 46 mS cm -1 at 80 °C and the highest residual IEC of 83 % after alkaline treatment for 120 h. Moreover, the assembled alkaline direct methanol fuel cell exhibits a remarkable power density of 49.3 mW cm -2 at 80 °C. This work provides a new strategy for fabricating high-performance anion exchange membranes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O 2 - , h + , and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, chitosan nanoparticles (ChNs) were used as an adsorbent for single and simultaneous uptake of cationic (methylene blue (MB)) and anionic (methyl orange (MO)) dyes. ChNs were prepared based on the ionic gelation method using sodium tripolyphosphate (TPP) and characterized by zetasizer, FTIR, BET, SEM, XRD, and pH PZC . The studied parameters that affect removal efficiency included pH, time, and dyes' concentration. The results showed that in single-adsorption mode, the removal of MB is better in alkaline pH, contrary to MO uptake which presents higher removal efficiency in acidic media. The simultaneous removal of MB and MO from the mixture solution by ChNs could be achieved under neutral conditions. The adsorption kinetic results showed that adsorption of MB and MO for both single-adsorption and binary adsorption systems comply with the pseudo-second-order model. Langmuir, Freundlich, and Redlich-Peterson isotherms were used for the mathematical description of single-adsorption equilibrium, while non-modified Langmuir and extended Freundlich isotherms were used to fit the co-adsorption equilibrium results. The maximum adsorption capacities of MB and MO in a single dye adsorption system were 315.01 and 257.05 mg/g for MB and MO, respectively. On the other hand, and for binary adsorption system, the adsorption capacities were 49.05 and 137.03 mg/g, respectively. The adsorption capacity of MB decreases in solution containing MO and vice versa, suggesting an antagonistic behavior of MB and MO on ChNs. Overall, ChNs could be a candidate for single and binary removal of MB and MO in dye-containing wastewater., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Eco-friendly and renewable sodium alginate, as a potential alternative to fossil resources, has attracted considerable attention in wastewater treatment field. Herein, we develop a SA/PEI/PEG (sodium alginate/polyethyleneimine/polyethylene glycol diglycidyl ether) adsorbent in which SA was functionalized by PEI/PEG via a facile but effective strategy of one-pot gelation of aqueous SA/PEI/PEG solution. Systematic investigations were accomplished to explore the effects of adsorbent factors on the adsorption performances of the adsorbent towards the anionic dyes CR (congo red), AB-10B (amido black-10B), and AB-25 (acid blue-25). Strikingly, the SA/PEI/PEG exhibited exceptional adsorption performance to CR (2782 mg g -1 , 90.6 %), AB-10B (1369 mg g -1 , 90.9 %) and AB-25 (4221 mg g -1 , 92.6 %) at 30 °C, pH = 3, 200 r min -1 and oscillated 24 h, and demonstrating exceptional reusability after six cycles of adsorption-desorption cycles. Furthermore, the three kinetic, four isothermic and one thermodynamic models were used to investigate the adsorption behaviors of the adsorbent towards these dyes. The possible adsorption mechanism is suggested: Hydrogen bond interactions and electrostatic attractions between SA/PEI/PEG and the dyes primarily contribute to exceptional adsorption capacity. The SA/PEI/PEG adsorbent endowed with easy fabrication, extraordinary adsorption capacity and excellent reusability promises potential application prospects in wastewater purification industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Negative-ion electron capture dissociation (niECD) is an anion MS/MS technique that provides fragmentation analogous to conventional ECD, including high peptide sequence coverage and retention of labile post-translational modifications (PTMs). niECD has been proposed to be the most efficient for salt-bridged zwitterionic precursor ion structures. Several important PTMs, e.g., sulfation and phosphorylation, are acidic and can, therefore, be challenging to characterize in the positive-ion mode. Furthermore, PTM-friendly techniques, such as ECD, require multiple precursor ion-positive charges. By contrast, singly charged ions, refractory to ECD, are most compatible with niECD. Because electrospray ionization (ESI) typically yields multiply charged ions, we sought to explore matrix-assisted laser desorption/ionization (MALDI) in combination with niECD. However, the requirement for zwitterionic gaseous structures may preclude efficient niECD of MALDI-generated anions. Unexpectedly, we found that niECD of anions from MALDI is not only possible but proceeds with similar or higher efficiency compared with ESI-generated anions. Matrix selection did not appear to have a major effect. With MALDI, niECD is demonstrated up to m / z ∼4300. For such larger analytes, multiple electron captures are observed, resulting in triply charged fragments from singly charged precursor ions. Such charge-increased fragments show improved detectability. Furthermore, significantly improved (∼20-fold signal-to-noise increase) niECD spectral quality is achieved with equivalent sample amounts from MALDI vs ESI. Overall, the reported combination with MALDI significantly boosts the analytical utility of niECD.

Artificial ion transport systems have emerged as an important class of compounds that promise applications in chemotherapeutics as anticancer agents or to treat channelopathies. Stimulus-responsive systems that offer spatiotemporally controlled activity for targeted applications remain rare. Here we utilize dynamic hydrogen bonding interactions of a 4,6-dihydroxy-isophthalamide core to generate a modular platform enabling access to stimuli-responsive ion transporters that can be activated in response to a wide variety of external stimuli, including light, redox, and enzymes, with excellent OFF-ON activation profiles. Alkylation of the two free hydroxyl groups with stimulus-responsive moieties locks the amide bonds through intramolecular hydrogen bonding and hence makes them unavailable for anion binding and transport. Triggering using a particular stimulus to cleave both cages reverses the hydrogen bonding arrangement, to generate a highly preorganized anion binding cavity for efficient transmembrane transport. Integration of two cages that are responsive to orthogonal stimuli enables multi-stimuli activation, where both stimuli are required to trigger transport in an AND logic process. Importantly, the strategy provides a facile method to post-functionalize the highly active transporter core with a variety of stimulus-responsive moieties for targeted activation with multiple triggers., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Poor cellular permeability greatly hampers the utilization of anionic Ir(III) complexes, though efficiently emissive and remarkably stable, in cell-based diagnosis. To overcome this barrier, we present the development of an alkaline phosphatase (ALP)-responsive, anionic, and aggregation-induced emission (AIE)-active Ir(III) complex (Ir1) for specific recognition of osteosarcoma cells. Containing phosphate moieties, Ir1 exhibits a net -1 charge, enabling charge repulsion from the cell membrane and resulting in low cellular uptake and good biocompatibility in normal osteoblast cells. Upon ALP-mediated hydrolysis of phosphate groups, the resulting dephosphorylated product, Ir2, demonstrates a positive charge and increased lipophilicity, promoting cellular uptake and activating its AIE properties for specific recognition of osteosarcoma cells that express elevated levels of ALP. This study elucidates the role of ALP as an ideal trigger for enhancing the cellular permeability of phosphate ester-containing Ir(III) complexes, thus expanding the potential of anionic Ir(III) complexes for biomedical applications.

Anions have a profound effect on the properties of soluble proteins. Such Hofmeister effects have implications in biologics stability, protein aggregation, amyloidogenesis, and crystallization. However, the interplay between the important noncovalent interactions (NCIs) responsible for Hofmeister effects is poorly understood. To contribute to improving this state of affairs, we report on the NCIs between anions and ammonium and guanidinium hosts 1 and 2 , and the consequences of these. Specifically, we investigate the properties of cavitands designed to mimic two prime residues for anion-protein NCIs─lysines and arginines─and the solubility consequences of complex formation. Thus, we report NMR and ITC affinity studies, X-ray analysis, MD simulations, and anion-induced critical precipitation concentrations. Our findings emphasize the multitude of NCIs that guanidiniums can form and how this repertoire qualitatively surpasses that of ammoniums. Additionally, our studies demonstrate the ease by which anions can dispense with a fraction of their hydration-shell waters, rearrange those that remain, and form direct NCIs with the hosts. This raises many questions concerning how solvent shell plasticity varies as a function of anion, how the energetics of this impact the different NCIs between anions and ammoniums/guanidiniums, and how this affects the aggregation of solutes at high anion concentrations.

Fluorescence imaging-guided photodynamic therapy (PDT) has attracted extensive attention due to its potential of real-time monitoring the lesion locations and visualizing the treatment process with high sensitivity and resolution. Aggregation-induced emission luminogens (AIEgens) show enhanced fluorescence and reactive oxygen species (ROS) generation after cellular uptake, giving them significant advantages in bioimaging and PDT applications. However, most AIEgens are unfavorable for the application in organisms due to their severe hydrophobicity. Anion-π + type AIEgens carry intrinsic charges that can effectively alleviate their hydrophobicity and improve their binding capability to cells, which is expected to enhance the bioimaging quality and PDT performance. This concept summarizes the applications of anion-π + type AIEgens in fluorescence imaging, fluorescence imaging-guided photodynamic anticancer and antimicrobial therapy in recent years, hoping to provide some new ideas for the construction of robust photosensitizers. Finally, the current problems and future challenges of anion-π + AIEgens are discussed., (© 2024 Wiley-VCH GmbH.)

NiFe layered double hydroxides (NiFe-LDH) exhibited an outstanding performance and promising application potential for removing ozone. However, the effect of interlayer anions on ozone removal remains ambiguous. Here, a series of NiFe-LDH with different interlayer anions (F - , Cl - , Br - , NO 3 - , CO 3 2- , and SO 4 2- ) were prepared to investigate the effect of the interlayer anion on ozone removal for the first time. It was found that the interlayer anions are a key factor affecting the water resistance of the NiFe-LDH catalyst under moist conditions. NiFe-LDH-CO 3 2- exhibited the best water resistance, which was much better than that of NiFe-LDH containing other interlayer anions. The in situ DIRFTS demonstrates that the carbonates in the interlayer of NiFe-LDH-CO 3 2- will undergo coordination changes through the interaction with water molecules under moist conditions, exposing new metal sites. As a result, the newly exposed metal sites could activate water molecules into hydroxyl groups that act as active sites for catalyzing ozone decomposition. This work provides a new insight into the interlayer anions of LDH, which is important for the design and development of LDH catalysts with excellent ozone removal properties.

A comprehensive thermodynamic and structural study of the complexation affinities of tetra ( L1 ), penta ( L2 ), and hexaphenylalanine ( L3 ) linear peptides towards several inorganic anions in acetonitrile (MeCN) and N , N -dimethylformamide (DMF) was carried out. The influence of the chain length on the complexation thermodynamics and structural changes upon anion binding are particularly addressed here. The complexation processes were characterized by means of spectrofluorimetric, 1 H NMR, microcalorimetric, and circular dichroism spectroscopy titrations. The results indicate that all three peptides formed complexes of 1:1 stoichiometry with chloride, bromide, hydrogen sulfate, dihydrogen phosphate (DHP), and nitrate anions in acetonitrile and DMF. In the case of hydrogen sulfate and DHP, anion complexes of higher stoichiometries were observed as well, namely those with 1:2 and 2:1 (peptide:anion) complexes. Anion-induced peptide backbone structural changes were studied by molecular dynamic simulations. The anions interacted with backbone amide protons and one of the N -terminal amine protons through hydrogen bonding. Due to the anion binding, the main chain of the studied peptides changed its conformation from elongated to quasi-cyclic in all 1:1 complexes. The accomplishment of such a conformation is especially important for cyclopeptide synthesis in the head-to-tail macrocyclization step, since it is most suitable for ring closure. In addition, the studied peptides can act as versatile ionophores, facilitating transmembrane anion transport.