Search

Torque vectoring by virtue of independent electric motors is the focus of an increasing number of studies as electric vehicles gain prominence as the chosen direction for the automotive industry. Building on active yaw control systems developed over the past decades, torque vectoring benefits from the high-responsiveness and controllability of the electric motor actuator. Furthermore, and especially in the case of vehicles equipped with one independent motor per wheel, the overall performance envelope of the vehicle is significantly improved, as well as the ability to actively shape the vehicle handling. Much attention has been focussed on controller development and control allocation aspects of torque vectoring controllers, but little on the appropriate yaw rate reference. Optimal control studies have been successfully used to mimic the expert driver in both minimum-time circuit racing and high-sideslip rally driving, and can offer insight into how to optimally tune active chassis control systems, such as torque vectoring yaw control. The main aim of this thesis was to investigate the optimal handling characteristics of an electric vehicle with four independent electric motors at the limits of performance. A TV controller was first developed for a prototype sportscar with 4 independent motors, employing a model-based design process that encompassed real-time software in the loop testing. Real-world track testing demonstrated the controller was able to successfully modify the handling characteristic of the vehicle in both understeer and oversteer directions, achieving good controller performance in steady-state and transient manoeuvres. The limit performance of the TV-controlled vehicle was subsequently investigated in the simulation domain. Numerical techniques were used to solve optimal control problems for a single-track vehicle model with linear tyres and an external yaw moment term representing the overall yaw moment arising from the difference in torques at each wheel. For a U-turn manoeuvre, it was shown that torque vectoring significantly lowers manoeuvre time in comparison with the vehicle without TV active, and that modifying the passive understeer gradient does not affect manoeuvre time. The system dynamics were reformulated to include a feedback torque vectoring controller. The target yaw rate reference was varied and it was found that the manoeuvre time was highly sensitive to the yaw rate reference. For minimising laptime, the target understeer gradient should be set to the passive understeer gradient value. The methodology was repeated for a higher fidelity model including nonlinear tyres and lateral load transfer, and found that when the torque vectoring controller was included in the system dynamics, the manoeuvre time showed little sensitivity to the target understeer gradient. Following the contradictory results of the optimal control problems, the vehicle models were investigated next. Time optimal yaw rate gain surfaces were generated from further minimum-time optimal control problems. Open-loop manoeuvres investigating effects of tyre model, lateral load transfer and torque vectoring generation mechanism found that tyre modelling was the dominant differentiator and tyre nonlinearity is an essential modelling consideration. Optimal control techniques have been used for high sideslip manoeuvring for conventional vehicles but no studies have explored the effects of torque vectoring on agility. In the final chapter, an aggressive turn-around manoeuvre was simulated and it was found that torque vectoring can significantly increase agility and reduce the space taken for an aggressive turn-around manoeuvre. Reducing yaw inertia increased agility, as well as increasing longitudinal slips limits. A critique of agility metrics in this context was given.

Stricter regulations and evolving environmental concerns have been exerting ever-increasing pressure on the automotive industry to produce low carbon vehicles that reduce emissions. As a result, increasing numbers of alternative powertrain architectures have been released into the marketplace to address this need. However, with a myriad of possible alternative powertrain configurations, which is the most appropriate type for a given vehicle class and duty cycle? To that end, comparative analyses of powertrain configurations have been widely carried out in literature; though such analyses only considered limited types of powertrain architectures at a time. Collating the results from these literature often produced findings that were discontinuous, which made it difficult for drawing conclusions when comparing multiple types of powertrains. The aim of this research is to propose a novel methodology that can be used by practitioners to improve the methods for comparative analyses of different types of powertrain architectures. Contrary to what has been done so far, the proposed methodology combines an optimisation algorithm with a Modular Powertrain Structure that facilitates the simultaneous approach to optimising multiple types of powertrain architectures. The contribution to science is two-folds; presenting a methodology to simultaneously select a powertrain architecture and optimise its component sizes for a given cost function, and demonstrating the use of multi-objective optimisation for identifying trade-offs between cost functions by powertrain architecture selection. Based on the results, the sizing of the powertrain components were influenced by the power and energy requirements of the drivecycle, whereas the powertrain architecture selection was mainly driven by the autonomy range requirements, vehicle mass constraints, CO2 emissions, and powertrain costs. For multi-objective optimisation, the creation of a 3-dimentional Pareto front showed multiple solution points for the different powertrain architectures, which was inherent from the ability of the methodology to concurrently evaluate those architectures. A diverging trend was observed on this front with the increase in the autonomy range, driven primarily by variation in powertrain cost per kilometre. Additionally, there appeared to be a trade-off in terms of electric powertrain sizing between CO2 emissions and lowest mass. This was more evident at lower autonomy ranges, where the battery efficiency was a deciding factor for CO2 emissions. The results have demonstrated the contribution of the proposed methodology in the area of multi-objective powertrain architecture optimisation, thus addressing the aims of this research.

Vehicle Dynamics Control (VDC) systems (also known as Active Chassis systems) are mechatronic systems developed for improving vehicle comfort, handling and/or stability. Traditionally, most of these systems have been individually developed and manufactured by various suppliers and utilised by automotive manufacturers. These decentralised control systems usually improve one aspect of vehicle performance and in some cases even worsen some other features of the vehicle. Although the benefit of the stand-alone VDC systems has been proven, however, by increasing the number of the active systems in vehicles, the importance of controlling them in a coordinated and integrated manner to reduce the system complexity, eliminate the possible conflicts as well as expand the system operational envelope, has become predominant. The subject of Integrated Vehicle Dynamics Control (IVDC) for improving the overall vehicle performance in the existence of several VDC active systems has recently become the topic of many research and development activities in both academia and industries Several approaches have been proposed for integration of vehicle control systems, which range from the simple and obvious solution of networking the sensors, actuators and processors signals through different protocols like CAN or FlexRay, to some sort of complicated multi-layered, multi-variable control architectures. In fact, development of an integrated control system is a challenging multidisciplinary task and should be able to reduce the complexity, increase the flexibility and improve the overall performance of the vehicle. The aim of this thesis is to develop a low-cost control scheme for integration of Electric Power-Assisted Steering (EPAS) system with Enhanced Stability Program (ESP) system to improve driver comfort as well as vehicle safety. In this dissertation, a systematic approach toward a modular, flexible and reconfigurable control architecture for integrated vehicle dynamics control systems is proposed which can be implemented in real time environment with low computational cost. The proposed control architecture, so named “Integrated Vehicle Control System (IVCS)”, is customised for integration of EPAS and ESP control systems. IVCS architecture consists of three cascade control loops, including high-level vehicle control, low-level (steering torque and brake slip) control and smart actuator (EPAS and EHB) control systems. The controllers are designed based on Youla parameterisation (closed-loop shaping) method. A fast, adaptive and reconfigurable control allocation scheme is proposed to coordinate the control of EPAS and ESP systems. An integrated ESP & ESP HiL/RCP system including the real EPAS and Electro Hydraulic Brake (EHB) smart actuators integrated with a virtual vehicle model (using CarMaker/HiL®) with driver in the loop capability is designed and utilised as a rapid control development platform to verify and validate the developed control systems in real time environment. Integrated Vehicle Dynamic Control is one of the most promising and challenging research and development topics. A general architecture and control logic of the IVDC system based on a modular and reconfigurable control allocation scheme for redundant systems is presented in this research. The proposed fault tolerant configuration is applicable for not only integrated control of EPAS and ESP system but also for integration of other types of the vehicle active systems which could be the subject of future works.

The adoption of Plug-in Hybrid Electric Vehicles (PHEVs) is widely seen as an interim solution for the decarbonisation of the transport sector. Within a PHEV, determining the required energy storage capacity of the battery remains one of the primary concerns for vehicle manufacturers and system integrators. This fact is particularly pertinent since the battery constitutes the largest contributor to vehicle mass. Furthermore, the financial cost associated with the procurement, design and integration of battery systems is often cited as one of the main barriers to vehicle commercialisation. The ability to integrate the optimization of the energy management control system with the sizing of key PHEV powertrain components presents a significant area of research. Further, recent studies suggest the use of \intelligent transport" infrastructure to include a predictive element to the energy management strategy to achieve reductions in emissions. The thesis addresses the problem of determining the links between component-sizing, real-world usage and energy management strategies for a PHEV. The objective is to develop an integrated framework in which the advantages of predictive energy management can be realised by component downsizing for a PHEV. The study is spilt into three sections. The first part presents the framework by which the predictive element can be included into the PHEV's energy management strategy. Second part describes the development of the PHEV component models and the various energy management strategies which control the split in energy used between the engine and the battery. In this section a new control strategy is presented which integrates the predictive element proposed in the first part. Finally, in the third section an optimisation framework is presented by which the size of the components within the PHEV are reduced due to the lower energy demands of the new proposed energy management strategy. The first part of the study presents a framework by which the energy consumption of a vehicle may be predicted over a route. The proposed energy prediction framework employs a neural network and was used o_-line for estimating the real-world energy consumption of the vehicle so that it can be later integrated within the vehicles energy management control system. Experimental results show an accuracy within 20%-30% when comparing predicted and measured energy consumptions for over 800 different real-world EV journeys … [cont.].