Search

The quest for eco-friendly materials with anticipated positive impact for sustainability is crucial to achieve the UN sustainable development goals. Classical strategies of composite materials can be applied on novel nanomaterials and green materials. Besides the actual technology and applications also processing and manufacturing methods should be further advanced to make entire technology concepts sustainable. Here, they show an efficient way to combine two low-cost materials, cellulose and zinc oxide (ZnO), to achieve novel functional and "green" materials via paper-making processes. While cellulose is the most abundant and cost-effective organic material extractable from nature. ZnO is cheap and known of its photocatalytic, antibacterial, and UV absorption properties. ZnO nanowires are grown directly onto cellulose fibers in water solutions and then dewatered in a process mimicking existing steps of large-scale papermaking technology. The ZnO NW paper exhibits excellent photo-conducting properties under simulated sunlight with good ON/OFF switching and long-term stability (90 minutes). It also acts as an efficient photocatalyst for hydrogen peroxide (H2O2) generation (5.7 x 10(-9) m s(-1)) with an envision the possibility of using it in buildings to enable large surfaces to spontaneously produce H2O2 at its outer surface. Such technology promise for fast degradation of microorganisms to suppress the spreading of diseases., Funding Agencies|Knut and Alice Wallenberg Foundation; VINNOVA (Digital Cellulose Center); Vetenskapradet [2016-05990]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009-00971]; aForsk Foundation [17-433]

The conductivity of organic polymer heterojunction devices relies on the electron dynamics occurring along interfaces between the acceptor and donor moieties. To investigate these dynamics with chemical specificity, spectroscopic techniques are employed to obtain localized snapshots of the electron behavior at selected interfaces. In this study, charge transfer in blends (by weight 10, 50, 90, and 100%) of p-type polymer P(g(4)2T-T) (bithiophene-thiophene) and n-type polymer BBL (poly(benzimidazo-benzo-phenanthroline)) was measured by resonant Auger spectroscopy. Electron spectra emanating from the decay of core-excited states created upon X-ray absorption in the donor polymer P(g(4)2T-T) were measured in the sulfur KL2,3L2,3 Auger kinetic energy region as a function of the excitation energy. By tuning the photon energy across the sulfur K-absorption edge, it is possible to differentiate between decay paths in which the core-excited electron remained on the atom with the core-hole and those where it tunneled away. Analyzing the competing decay modes of these localized and delocalized (charge-transfer) processes facilitated the computation of charge-transfer times as a function of excitation energy using the core-hole clock method. The electron delocalization times derived from the measurements were found to be in the as/fs regime for all polymer blends, with the fastest charge transfer occurring in the sample with an equal amount of donor and acceptor polymer. These findings highlight the significance of core-hole clock spectroscopy as a chemically specific tool for examining the local charge tunneling propensity, which is fundamental to understanding macroscopic conductivity. Additionally, the X-ray absorption spectra near the sulfur K-edge in the P(g(4)2T-T) polymer for different polymer blends were analyzed to compare molecular structure, orientation, and ordering in the polymer heterojunctions. The 50% donor sample exhibited the most pronounced angular dependenc, QC 20240201

The nature of mass transport in plants has recently inspired the development of low-cost and sustainable wood-based electronics. Herein, we report a wood electrochemical transistor (WECT) where all three electrodes are fully made of conductive wood (CW). The CW is prepared using a two-step strategy of wood delignification followed by wood amalgamation with a mixed electron-ion conducting polymer, poly(3,4-ethylenedioxythiophene)–polystyrene sulfonate (PEDOT:PSS). The modified wood has an electrical conductivity of up to 69 Sm−1 induced by the formation of PEDOT:PSS microstructures inside the wood 3D scaffold. CW is then used to fabricate the WECT, which is capable of modulating an electrical current in a porous and thick transistor channel (1 mm) with an on/off ratio of 50. The device shows a good response to gate voltage modulation and exhibits dynamic switching properties similar to those of an organic electrochemical transistor. This wood-based device and the proposed working principle demonstrate the possibility to incorporate active electronic functionality into the wood, suggesting different types of bio-based electronic devices., QC 20230713

Soft vibrotactile devices have the potential to expandthe functionalityof emerging electronic skin technologies. However, those devices oftenlack the necessary overall performance, sensing-actuation feedbackand control, and mechanical compliance for seamless integration onthe skin. Here, we present soft haptic electromagnetic actuators thatconsist of intrinsically stretchable conductors, pressure-sensitiveconductive foams, and soft magnetic composites. To minimize jouleheating, high-performance stretchable composite conductors are developedbased on in situ-grown silver nanoparticles formed within the silverflake framework. The conductors are laser-patterned to form soft anddensely packed coils to further minimize heating. Soft pressure-sensitiveconducting polymer-cellulose foams are developed and integrated totune the resonance frequency and to provide internal resonator amplitudesensing in the resonators. The above components together with a softmagnet are assembled into soft vibrotactile devices providing high-performanceactuation combined with amplitude sensing. We believe that soft hapticdevices will be an essential component in future developments of multifunctionalelectronic skin for future human-computer and human-roboticinterfaces.

Seamless integration between biological systems and electrical components is essential for enabling a twinned biochemical–electrical recording and therapy approach to understand and combat neurological disorders. Employing bioelectronic systems made up of conjugated polymers, which have an innate ability to transport both electronic and ionic charges, provides the possibility of such integration. In particular, translating enzymatically polymerized conductive wires, recently demonstrated in plants and simple organism systems, into mammalian models, is of particular interest for the development of next-generation devices that can monitor and modulate neural signals. As a first step toward achieving this goal, enzyme-mediated polymerization of two thiophene-based monomers is demonstrated on a synthetic lipid bilayer supported on a Au surface. Microgravimetric studies of conducting films polymerized in situ provide insights into their interactions with a lipid bilayer model that mimics the cell membrane. Moreover, the resulting electrical and viscoelastic properties of these self-organizing conducting polymers suggest their potential as materials to form the basis for novel approaches to in vivo neural therapeutics., Funding: Swedish Foundation for Strategic Research [RMX18-0083]; Swedish Research Council [201806197]; European Research Council [834677 e-NeuroPharma ERC-2018-ADG]

The interfacial energetics are known to play a crucial role in organic diodes, transistors, and sensors. Designing the metal-organic interface has been a tool to optimize the performance of organic (opto)electronic devices, but this is not reported for organic thermoelectrics. In this work, it is demonstrated that the electrical power of organic thermoelectric generators (OTEGs) is also strongly dependent on the metal-organic interfacial energetics. Without changing the thermoelectric figure of merit (ZT) of polythiophene-based conducting polymers, the generated power of an OTEG can vary by three orders of magnitude simply by tuning the work function of the metal contact to reach above 1000 mu W cm(-2). The effective Seebeck coefficient (S-eff) of a metal/polymer/metal single leg OTEG includes an interfacial contribution (V-inter/Delta T) in addition to the intrinsic bulk Seebeck coefficient of the polythiophenes, such that S-eff = S + V-inter/Delta T varies from 22.7 mu V K-1 [9.4 mu V K-1] with Al to 50.5 mu V K-1 [26.3 mu V K-1] with Pt for poly(3,4-ethylenedioxythiophene):p-toluenesulfonate [poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)]. Spectroscopic techniques are used to reveal a redox interfacial reaction affecting locally the doping level of the polymer at the vicinity of the metal-organic interface and conclude that the energetics at the metal-polymer interface provides a new strategy to enhance the performance of OTEGs., Funding Agencies|Knut and Alice Wallenberg Foundation; EU [ESR 955837_HORATES]; Swedish Research Council [2016-06146, 2016-03979]; Forsk [18-313]; Academy of Finland Postdoctoral Researcher [340103]; EU H2020 Marie Sklodowska-Curie [101022777]; Swedish Foundation for Strategic Research (SiOS); Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoeping University [2009-00971]

Lignin, obtained as a waste product in huge quantities from the large-scale cellulose processing industries, holds a great potential to be used as sustainable electrode material for large-scale electroactive energy storage systems. The fixed number of redox-active phenolic groups present within the lignin structure limits the electrochemical performance and the total energy storage capacity of the lignin-based electrodes. Herein, the way to enhance the charge storage capacity of lignin by incorporating additional small catechol molecules into the lignin structure is demonstrated. The catechol derivatives are covalently attached to the lignin via aromatic electrophilic substitution reaction. The increased phenolic groups in all functionalized lignin derivatives notably increase the values of capacitance compared to pristine lignin. Further, solvent fractionation of lignin followed by functionalization using catechol boosts three times the charge capacity of lignin electrode. Herein, a scalable, cost-effective method to enhance the electrochemical performance of lignin electrodes via incorporation of small redox active moieties into the lignin structure is demonstrated. Solvent fractionation of lignin followed by functionalization using catechol increases the charge storage capacity of the lignin-carbon composite electrode by a factor of 3 reaching record high charge capacity above 100 mAh g-1., Funding Agencies|Knut and Alice Wallenberg Foundation [KAW 2020-0174]; Wallenberg Wood Science Center; Swedish Energy Agency [P52023-1]; Forsk Foundation [22-134]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009-00971]

The organic electronic ion pump (OEIP) is an on-demand electrophoretic drug delivery device, that via electronic to ionic signal conversion enables drug delivery without additional pressure or volume changes. The fundamental component of OEIPs is their polyelectrolyte membranes which are shaped into ionic channels that conduct and deliver ionic drugs, with high spatiotemporal resolution. The patterning of these membranes is essential in OEIP devices and is typically achieved using laborious micro processing techniques. Here, we report the development of an inkjet printable formulation of polyelectrolyte, based on a custom anionically functionalized hyperbranched polyglycerol (i-AHPG). This polyelectrolyte ink greatly simplifies the fabrication process, and is used in the production of free standing, OEIPs on flexible polyimide substrates. Both i-AHPG and the OEIP devices are characterized, exhibiting favorable iontronic characteristics of charge selectivity and ability to transport aromatic compounds. Further, the applicability of these technologies is demonstrated by transport and delivery of the pharmaceutical compound bupivacaine to dorsal root ganglion cells with high spatial precision and effective nerve-blocking, highlighting the applicability of these technologies for biomedical scenarios., Funding: Swedish Foundation for Strategic Research; Knut and Alice Wallenberg Foundation; Swedish Research Council; European Research Council [834677]; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009-00971]; Vinnova

Despite a range of available pain therapies, most patients report so-called “breakthrough pain.” Coupled with global issues like opioid abuse, there is a clear need for advanced therapies and technologies for safe and effective pain management. Here the authors demonstrate a candidate for such an advanced therapy: precise and fluid-flow-free electrophoretic delivery via organic electronic ion pumps (OEIPs) of the commonly used anesthetic drug bupivacaine. Bupivacaine is delivered to dorsal root ganglion (DRG) neurons in vitro. DRG neurons are a good proxy for pain studies as they are responsible for relaying ascending sensory signals from nociceptors (pain receptors) in the peripheral nervous system to the central nervous system. Capillary based OEIPs are used due to their probe-like and free-standing form factor, ideal for interfacing with cells. By delivering bupivacaine with the OEIP and recording dose versus response (Ca2+ imaging), it is observed that only cells close to the OEIP outlet (≤75 µm) are affected (“anaesthetized”) and at concentrations up to 10s of thousands of times lower than with bulk/bolus delivery. These results demonstrate the first effective OEIP deliveryof a clinically approved and widely used analgesic pharmaceutical, and thus are a major translational milestone for this technology., Funding agencies: This work was supported by the Swedish Foundation for Strategic Research, the Knut and Alice Wallenberg Foundation, the Swedish Research Council, the European Research Council (AdG 2018 Magnus Berggren, 834677 and CoG 2019 Camilla Svensson, 866075), and Vinnova. Additional support was provided by the Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU no. 2009-00971).

Internet-of-Everything (IoE) is defined as networked connections of things, people, data, and processes. IoE nodes, preferably shaped as printed flexible systems, serve as the frontier outpost of the Internet and comprise devices to record and regulate states and functions. To power distributed IoE nodes in an ecofriendly manner, a technology to scavenge energy from ambience and self-powered devices is developed. For this, piezoelectricity is regarded as a key property; however, the current technology typically based on polyvinylidene difluoride (PVDF) copolymers is expensive and produced via toxic protocols. We report piezoelectric characteristics of electrochemically poled cellulose nanofiber (CNF) thin films processed from water dispersions. Poling these films under humid conditions causes breaking and reorientation of CNF segments, which results in enhanced crystal alignment rendering the resulting material piezoelectric. Generators based on poled CNF show similar piezoelectric voltage and coefficient, here measured as d(33) = 46 pm V-1, to devices including PVDF copolymer layers of similar thickness. Our findings promise low-cost and printable ecofriendly piezoelectric-powered IoE nodes., Funding Agencies|Knut and Alice Wallenberg Foundation; Swedish Research Council [2016-06146, 2018- 04037, 2009-00971]; NCD- SWEET beamline of ALBA synchrotron in Barcelona, Spain; [VR 2016-05990]

Lignin, a byproduct from the pulp industry, is one of the redox active biopolymers being investigated as a component in the electrodes for sustainable energy storage applications. Due to its insulating nature, it needs to be combined with a conductor such as carbon or conducting polymer for efficient charge storage. Here, the lignin/carbon composite electrodes manufactured via mechanical milling (ball milling) are reported. The composite formation, correlation between performance and morphology is studied by comparison with manual mixing and jet milling. Superior charge storage capacity with approximate to 70% of the total contribution from the Faradaic process involving the redox functionality of lignin is observed in a mechanically milled composite. In comparison, manual mix shows only approximate to 30% from the lignin storage participation while the rest is due to the electric double layer at the carbon-electrolyte interface. The significant participation of lignin in the ball milled composite is attributed to the homogeneous, intimate mixing of the carbon and the lignin leading the electronic carrier transported in the carbon phase to reach most of the redox group of lignin. A maximum capacity of 49 mAh g(-1) is obtained at charge/discharge rate of 0.25 A g(-1) for the sample milled for 60 min., Funding Agencies|Knut and Alice Wallenberg Foundation [KAW 2019-0344, KAW 2020-0174]; Wallenberg Wood Science Center; Vetenskapradet [2016-05990]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009-00971]; Wallenberg Scholar grants

Zn-ion batteries are one of the hot candidates for low-cost and sustainable secondary batteries. The hydrogen evolution and dendritic growth upon zinc deposition are todays challenges for that technology. One of the new strategies to cope with these issues is to use "water-in-salt" electrolyte (WISE), that is, super concentrated aqueous electrolytes, to broaden its electrochemical stability window (ESW), suppressing hydrogen evolution reaction (HER), and perturbing the dendritic growth. Herein, this work proposes to use "water-in-polymer salt" electrolyte (WIPSE) concept to mitigate the challenges with Zn ion batteries and bring this technology toward one of the cheapest, greenest, and most sustainable electrodes: Lignin-carbon (L-C) electrode. Potassium polyacrylate (PAAK) as WISE bears out as better electrolyte for L-C electrodes in terms of self-discharge, cyclic stability, and specific capacity compared to conventional electrolyte based on chemically cousin molecule potassium acetate. Zinc bis(trifluoromethanesulfonyl) imide (Zn(TFSI)(2)) added into WIPSE shows deposition and dissolution of Zn in Zn//Zn symmetric cell suggesting that Zn2+ are moving into the polyanionic network. Furthermore, the added bis (trifluor omethanesul fonyl) imide (TFSI-) metal salts trigger a approximate to 40% enhancement of the capacity of L-C electrode. These results show a new promising direction toward the development of cost-effective and sustainable Zn-lignin batteries., Funding Agencies|Knut and Alice Wallenberg (KAW) foundation [KAW 2020.0174]; Swedish Research Council [2016-05990]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009-00971]; competence center FunMat-II - Swedish Agency for Innovation Systems (Vinnova) [2016-05156]; aforsk foundation [21-130]; KAW

Biointegrated neuromorphic hardware holds promise for new protocols to record/regulate signalling in biological systems. Making such artificial neural circuits successful requires minimal device/circuit complexity and ion-based operating mechanisms akin to those found in biology. Artificial spiking neurons, based on silicon-based complementary metal-oxide semiconductors or negative differential resistance device circuits, can emulate several neural features but are complicated to fabricate, not biocompatible and lack ion-/chemical-based modulation features. Here we report a biorealistic conductance-based organic electrochemical neuron (c-OECN) using a mixed ion-electron conducting ladder-type polymer with stable ion-tunable antiambipolarity. The latter is used to emulate the activation/inactivation of sodium channels and delayed activation of potassium channels of biological neurons. These c-OECNs can spike at bioplausible frequencies nearing 100 Hz, emulate most critical biological neural features, demonstrate stochastic spiking and enable neurotransmitter-/amino acid-/ion-based spiking modulation, which is then used to stimulate biological nerves in vivo. These combined features are impossible to achieve using previous technologies., Funding Agencies|Linkoeping University

Interfacing electronics with neural tissue is crucial for understanding complex biological functions, but conventional bioelectronics consist of rigid electrodes fundamentally incompatible with living systems. The difference between static solid-state electronics and dynamic biological matter makes seamless integration of the two challenging. To address this incompatibility, we developed a method to dynamically create soft substrate-free conducting materials within the biological environment. We demonstrate in vivo electrode formation in zebrafish and leech models, using endogenous metabolites to trigger enzymatic polymerization of organic precursors within an injectable gel, thereby forming conducting polymer gels with long-range conductivity. This approach can be used to target specific biological substructures and is suitable for nerve stimulation, paving the way for fully integrated, in vivo-fabricated electronics within the nervous system., Funding Agencies|European Research Council [834677]; Swedish Research Council [2018-06197, RMX18-0083]; Swedish Foundation for Strategic Research [2021-05231]; Knut and Alice Wallenberg Foundation; Onnesjoe Foundation

Sustainable production of hydrogen gas, a green energy carrier of high density, is possible only by electrolysis of water based on the hydrogen evolution reaction (HER). Here, we report the effect of oxygen poisoning on the efficiency of hydrogen production and the consumption by the HER and the hydrogen oxidation reaction (HOR), respectively, on the interface of platinum group metal-free electrocatalyst TaS2 in pristine form and intercalated by the organic Lewis base hexylamine. The state of the surface probed by photoelectron spectroscopy was significantly altered by both Lewis base doping and oxygen poisoning. This alteration dramatically affects the hydrogen production efficiency in the HER, while the back process by the HOR was less sensitive to the changes in the surface states of the electrocatalysts. The oxygenated and intercalated electrocatalyst shows more than 2 x 105 times lower exchange current density of the HER compared to pristine oxygenated materials., Funding Agencies|Swedish Research Council [VR 2016-05990, VR 2020-04210]; Knut and Alice Wallenberg Foundation [KAW 2019.0604, 2021.0195]; Karl Erik O nnesjoes Foundation; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoeping University (Faculty Grant SFO-Mat-LiU) [2009-00971]

As robots more frequently fraternize with humans in everyday life, aspects such as safety, flexibility of tasks, and appearance become increasingly important. Soft robotics is attractive for new human-close applications, but soft actuators constitute a major challenge both in terms of actuation force and speed, and in terms of control and accuracy of the deformable soft actuator body. Herein, several of these challenges are addressed by developing versatile ultrasoft electromagnetic actuators that operate in absence of external magnetic fields, while simultaneously monitoring their states by internal strain sensors. The versatile actuators can compress to less than 50% of their initial length with strain-independent contraction force and operate in both contraction and expansion modes up to 200 Hz frequency while conforming to curved surfaces. The soft multilayer conductive cellulose-based foams are lightweight (3 mg cm(-3)) and provide internal strain-sensing capability and structural support, thereby improving the monitoring and controllability of the actuators while maintaining an axial softness of 0.6 kPa. It is believed that the concept of soft versatile electromagnetic actuators with integrated lightweight strain-sensing foams is promising for a wide range of applications within soft robotics., Funding Agencies|Knut and Alice Wallenberg Foundation, Linkoping University, and industry through the Wallenberg Wood Science Centre; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoping University [2009-00971]

Plant vasculature transports molecules that play a crucial role in plant signaling including systemic responses and acclimation to diverse environmental conditions. Targeted controlled delivery of molecules to the vascular tissue can be a biomimetic way to induce long distance responses, providing a new tool for the fundamental studies and engineering of stress-tolerant plants. Here, a flexible organic electronic ion pump, an electrophoretic delivery device, for controlled delivery of phytohormones directly in plant vascular tissue is developed. The c-OEIP is based on polyimide-coated glass capillaries that significantly enhance the mechanical robustness of these microscale devices while being minimally disruptive for the plant. The polyelectrolyte channel is based on low-cost and commercially available precursors that can be photocured with blue light, establishing much cheaper and safer system than the state-of-the-art. To trigger OEIP-induced plant response, the phytohormone abscisic acid (ABA) in the petiole of intact Arabidopsis plants is delivered. ABA is one of the main phytohormones involved in plant stress responses and induces stomata closure under drought conditions to reduce water loss and prevent wilting. The OEIP-mediated ABA delivery triggered fast and long-lasting stomata closure far away from the delivery point demonstrating systemic vascular transport of the delivered ABA, verified delivering deuterium-labeled ABA., Funding Agencies|European Union [800926 (FET-OPEN-HyPhOE)]; Swedish Foundation For Strategic Research; Swedish Foundation For Strategic Research [FFL18-0101]; Knut and Alice Wallenberg Foundation; Wallenberg Wood Science Center; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoeping University [2009-00971]; Swedish Research Council; Swedish Governmental Agency for Innovation Systems (VINNOVA)

Future brain-computer interfaces will require local and highly individualized signal processing of fully integrated electronic circuits within the nervous system and other living tissue. New devices will need to be developed that can receive data from a sensor array, process these data into meaningful information, and translate that information into a format that can be interpreted by living systems. Here, the first example of interfacing a hardware-based pattern classifier with a biological nerve is reported. The classifier implements the Widrow-Hoff learning algorithm on an array of evolvable organic electrochemical transistors (EOECTs). The EOECTs channel conductance is modulated in situ by electropolymerizing the semiconductor material within the channel, allowing for low voltage operation, high reproducibility, and an improvement in state retention by two orders of magnitude over state-of-the-art OECT devices. The organic classifier is interfaced with a biological nerve using an organic electrochemical spiking neuron to translate the classifiers output to a simulated action potential. The latter is then used to stimulate muscle contraction selectively based on the input pattern, thus paving the way for the development of adaptive neural interfaces for closed-loop therapeutic systems., Funding Agencies|Knut and Alice Wallenberg Foundation; Swedish Research Council [2018-06197, 2020-03243]; VINNOVA [2020-05223]; Swedish Foundation for Strategic Research [RMX18-0083]; European Research Council [834677]; European Commission [GA-964677]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University [SFO-Mat-LiU 2009-00971]

Electrical signals in plants are mediators of long-distance signaling and correlate with plant movements and responses to stress. These signals are studied with single surface electrodes that cannot resolve signal propagation and integration, thus impeding their decoding and link to function. Here, we developed a conformable multielectrode array based on organic electronics for large-scale and high-resolution plant electrophysiology. We performed precise spatiotemporal mapping of the action potential (AP) in Venus flytrap and found that the AP actively propagates through the tissue with constant speed and without strong directionality. We also found that spontaneously generated APs can originate from unstimulated hairs and that they correlate with trap movement. Last, we demonstrate that the Venus flytrap circuitry can be activated by cells other than the sensory hairs. Our work reveals key properties of the AP and establishes the capacity of organic bioelectronics for resolving electrical signaling in plants contributing to the mechanistic understanding of long-distance responses in plants., Funding Agencies|Swedish Foundation For Strategic Research [FFL18-0101]; European Union [800926]; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoeping University [2009-00971]; Piano di Sviluppo di Ateneo 2019 (Universita degli Studi di Milano)

Electrocatalysis enables the industrial transition to sustainable production of chemicals using abundant precursors and electricity from renewable sources. De-centralized production of hydrogen peroxide (H2O2) from water and oxygen of air is highly desirable for daily life and industry. We report an effective electrochemical refinery (e-refinery) for H2O2 by means of electrocatalysis-controlled comproportionation reaction (2(H)O + O -> 2(HO)), feeding pure water and oxygen only. Mesoporous nickel (II) oxide (NiO) was used as electrocatalyst for oxygen evolution reaction (OER), producing oxygen at the anode. Conducting polymer poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) drove the oxygen reduction reaction (ORR), forming H2O2 on the cathode. The reactions were evaluated in both half-cell and device configurations. The performance of the H2O2 e-refinery, assembled on anion-exchange solid electrolyte and fed with pure water, was limited by the unbalanced ionic transport. Optimization of the operation conditions allowed a conversion efficiency of 80%., Funding: Swedish Agency for Innovation Systems (Vinnova) [2016-05156]; Swedish Energy Agency [42022-1]; Swedish Research Council [VR 2021-04427, VR 2019-05577, VR 2016-05990]; Centre in Nanoscience and Technology (CeNano, Linkoeping Institute of Technology (LiTH), Linkoeping University, 2020, 2021); Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoeping University (Faculty Grant SFO-Mat-LiU) [2009-00971]; Knut and Alice Wallenberg Foundation (H2O2) [KAW 2018.0058]

The need for achieving sustainable technologies has encouraged research on renewable and biodegradable materials for novel products that are clean, green, and environmentally friendly. Nanocellulose (NC) has many attractive properties such as high mechanical strength and flexibility, large specific surface area, in addition to possessing good wet stability and resistance to tough chemical environments. NC has also been shown to easily integrate with other materials to form composites. By combining it with conductive and electroactive materials, many of the advantageous properties of NC can be transferred to the resulting composites. Conductive polymers, in particular poly(3,4-ethylenedioxythiophene:poly(styrene sulfonate) (PEDOT:PSS), have been successfully combined with cellulose derivatives where suspensions of NC particles and colloids of PEDOT:PSS are made to interact at a molecular level. Alternatively, different polymerization techniques have been used to coat the cellulose fibrils. When processed in liquid form, the resulting mixture can be used as a conductive ink. This review outlines the preparation of NC/PEDOT:PSS composites and their fabrication in the form of electronic nanopapers, filaments, and conductive aerogels. We also discuss the molecular interaction between NC and PEDOT:PSS and the factors that affect the bonding properties. Finally, we address their potential applications in energy storage and harvesting, sensors, actuators, and bioelectronics., Funding Agencies|Vinnova for the Digital Cellulose Competence Center (DCC) [2016-05193]; Swedish Foundation for Strategic Research [GMT14-0058]; Wallenberg Wood Science Centre

We demonstrate an organic electrochemical transistor (OECT) biosensor for the detection of interleukin 6 (IL6), an important biomarker associated with various pathological processes, including chronic inflammation, inflammaging, cancer, and severe COVID-19 infection. The biosensor is functionalized with oligonucleotide aptamers engineered to bind specifically IL6. We developed an easy functionalization strategy based on gold nanoparticles deposited onto a poly(3,4-ethylenedioxythiophene) doped with polystyrenesulfonate (PEDOT:PSS) gate electrode for the subsequent electrodeposition of thiolated aptamers. During this functionalization step, the reduction of sulfide bonds allows for simultaneous deposition of a blocking agent. A detection range from picomolar to nanomolar concentrations for IL6 was achieved, and the selectivity of the device was assessed against Tumor Necrosis Factor (TNF), another cytokine involved in the inflammatory processes., Funding Agencies|Knut och Alice Wallenbergs Stiftelse [813863]; European Union; Knut and Alice Wallenberg Foundation; Swedish Foundation for Strategic Research; Swedish Research Council

Active hydroponic substrates that stimulate on demand the plant growth have not been demonstrated so far. Here, we developed the eSoil, a low -power bioelectronic growth scaffold that can provide electrical stimulation to the plants' root system and growth environment in hydroponics settings. eSoil's active material is an organic mixed ionic electronic conductor while its main structural component is cellulose, the most abundant biopolymer. We demonstrate that barley seedlings that are widely used for fodder grow within the eSoil with the root system integrated within its porous matrix. Simply by polarizing the eSoil, seedling growth is accelerated resulting in increase of dry weight on average by 50% after 15 d of growth. The effect is evident both on root and shoot development and occurs during the growth period after the stimulation. The stimulated plants reduce and assimilate NO3- more efficiently than controls, a finding that may have implications on minimizing fertilizer use. However, more studies are required to provide a mechanistic understanding of the physical and biological processes involved. eSoil opens the pathway for the development of active hydroponic scaffolds that may increase crop yield in a sustainable manner., Funding Agencies|University

Practical interest in oxygen reduction reaction (ORR) has traditionally been due to its application at fuel cells' cathode following its complete 4e route to the water. In search of new electrode materials, it was discovered that conducting polymers (CPs) also are capable of driving ORR, though predominantly halting the process at 2e reduction leading to hydrogen peroxide generation. As alternative ways to produce this "green oxidant" are attracting increasing attention, a detailed study of the ORR mechanism at CP electrodes gains importance. Here, we summarize our recent theoretical work on the topic, which underscores the fundamental difference between CP and electrocatalytic metal ORR electrodes. Our insights also bring to us the attention of outer-sphere electron transfer, not unknown but somewhat ignored in the field. We also put the action of CP electrodes in a more general context of chemical ORR and redox mediation responsible for the electrocatalytic ORR mechanism., Funding Agencies|Wallenberg Wood Science Center; Swedish Research Council [VR 2019-05577]; Flexible metalair primary batteries [VR 2016-05990]; Paper fuel cell; Swedish Government Strategic Research Area in Materials Science on Advanced Functional Materials at Linkoping University [2009-00971]; Knutoch Alice Wallenbergs Stiftelse