Search

HIV virion assembly begins with the construction of an immature lattice consisting of Gag hexamers. Upon virion release, protease-mediated Gag cleavage leads to a maturation event in which the immature lattice disassembles and the mature capsid assembles. The cellular metabolite inositiol hexakisphosphate (IP 6 ) and maturation inhibitors (MIs) both bind and stabilize immature Gag hexamers, but whereas IP 6 promotes virus maturation, MIs inhibit it. Here we show that HIV is evolutionarily constrained to maintain an immature lattice stability that ensures IP 6 packaging without preventing maturation. Replication-deficient mutant viruses with reduced IP 6 recruitment display increased infectivity upon treatment with the MI PF46396 (PF96) or the acquisition of second-site compensatory mutations. Both PF96 and second-site mutations stabilise the immature lattice and restore IP 6 incorporation, suggesting that immature lattice stability and IP 6 binding are interdependent. This IP 6 dependence suggests that modifying MIs to compete with IP 6 for Gag hexamer binding could substantially improve MI antiviral potency., (Copyright © 2021 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

The HIV capsid is a multifunctional protein capsule that mediates the delivery of the viral genetic material into the nucleus of the target cell. Host cell proteins bind to a number of repeating binding sites on the capsid to regulate steps in the replication cycle. Here, we develop a fluorescence fluctuation spectroscopy method using self-assembled capsid particles as the bait to screen for fluorescence-labeled capsid-binding analytes ("prey" molecules) in solution. The assay capitalizes on the property of the HIV capsid as a multivalent interaction platform, facilitating high sensitivity detection of multiple prey molecules that have accumulated onto capsids as spikes in fluorescence intensity traces. By using a scanning stage, we reduced the measurement time to 10 s without compromising on sensitivity, providing a rapid binding assay for screening libraries of potential capsid interactors. The assay can also identify interfaces for host molecule binding by using capsids with defects in known interaction interfaces. Two-color coincidence detection using the fluorescent capsid as the bait further allows the quantification of binding levels and determination of binding affinities. Overall, the assay provides new tools for the discovery and characterization of molecules used by the HIV capsid to orchestrate infection. The measurement principle can be extended for the development of sensitive interaction assays, utilizing natural or synthetic multivalent scaffolds as analyte-binding platforms.

The HIV capsid self-assembles a protective conical shell that simultaneously prevents host sensing whilst permitting the import of nucleotides to drive DNA synthesis. This is accomplished through the construction of dynamic, highly charged pores at the centre of each capsid multimer. The clustering of charges required for dNTP import is strongly destabilising and it is proposed that HIV uses the metabolite IP6 to coordinate the pore during assembly. Here we have investigated the role of inositol phosphates in coordinating a ring of positively charged lysine residues (K25) that forms at the base of the capsid pore. We show that whilst IP5, which can functionally replace IP6, engages an arginine ring (R18) at the top of the pore, the lysine ring simultaneously binds a second IP5 molecule. Dose dependent removal of K25 from the pore severely inhibits HIV infection and concomitantly prevents DNA synthesis. Cryo-tomography reveals that K25A virions have a severe assembly defect that inhibits the formation of mature capsid cones. Monitoring both the kinetics and morphology of capsids assembled in vitro reveals that while mutation K25A can still form tubes, the ability of IP6 to drive assembly of capsid cones has been lost. Finally, in single molecule TIRF microscopy experiments, capsid lattices in permeabilised K25 mutant virions are rapidly lost and cannot be stabilised by IP6. These results suggest that the coordination of IP6 by a second charged ring in mature hexamers drives the assembly of conical capsids capable of reverse transcription and infection., Competing Interests: The authors have declared that no competing interests exist.

Tropomyosins regulate the dynamics and functions of the actin cytoskeleton by forming long chains along the two strands of actin filaments that act as gatekeepers for the binding of other actin-binding proteins. The fundamental molecular interactions underlying the binding of tropomyosin to actin are still poorly understood. Using microfluidics and fluorescence microscopy, we observed the binding of the fluorescently labeled tropomyosin isoform Tpm1.8 to unlabeled actin filaments in real time. This approach, in conjunction with mathematical modeling, enabled us to quantify the nucleation, assembly, and disassembly kinetics of Tpm1.8 on single filaments and at the single-molecule level. Our analysis suggests that Tpm1.8 decorates the two strands of the actin filament independently. Nucleation of a growing tropomyosin domain proceeds with high probability as soon as the first Tpm1.8 molecule is stabilized by the addition of a second molecule, ultimately leading to full decoration of the actin filament. In addition, Tpm1.8 domains are asymmetrical, with enhanced dynamics at the edge oriented toward the barbed end of the actin filament. The complete description of Tpm1.8 kinetics on actin filaments presented here provides molecular insight into actin-tropomyosin filament formation and the role of tropomyosins in regulating actin filament dynamics.

Background: The diagnosis of trigeminal neuralgia (TN) is challenging due to the lack of objective diagnostics. Corneal confocal microscopy (CCM) is a non-invasive ophthalmic imaging technique, which allows quantification of corneal nerve fibers arising from the trigeminal ganglion and may allow the assessment of neurodegeneration in TN. Methods: CCM was undertaken in 11 patients with TN and 11 age-matched healthy controls. Corneal nerve fiber density (CNFD), corneal nerve branch density, corneal nerve fiber length (CNFL), corneal nerve fiber width, corneal nerve fiber area, and dendritic cell and non-dendritic cell density with or without nerve fiber contact were quantified. Results: Patients with TN had significantly lower CNFD and CNFL but no difference for any other corneal nerve or dendritic cell parameter in the ipsilateral and the contralateral cornea compared to the control group. There was no significant difference in corneal nerve and cell parameters between patients with TN with and without involvement of the ophthalmic nerve (V1) or with nerve vessel conflict. Conclusion: Corneal confocal microscopy is a rapid non-invasive imaging technique that identifies symmetrical corneal nerve loss in patients with TN., (Copyright © 2020 Lee, Böcking, Holle-Lee, Malik, Kieseier, Hartung, Guthoff, Kleinschnitz and Stettner.)

The human immunodeficiency virus (HIV) capsid is a cone-shaped capsule formed from the viral capsid protein (CA), which is arranged into a lattice of hexamers and pentamers. The capsid comprises multiple binding interfaces for the recruitment of host proteins and macromolecules used by the virus to establish infection. Here, we coassembled CA proteins engineered for pentamer cross-linking and fluorescence labeling, into spherical particles. The CA spheres, which resemble the pentamer-rich structure of the end caps of the native HIV capsid, were immobilized onto surfaces as biorecognition elements for fluorescence microscopy-based quantification of host protein binding. The capsid-binding host protein cyclophilin A (CypA) is bound to CA spheres with the same affinity as CA tubes but at a higher CypA/CA stoichiometry, suggesting that the level of recruitment of CypA to the HIV capsid is dependent on curvature.

HIV-1 hijacks host proteins to promote infection. Here we show that HIV is also dependent upon the host metabolite inositol hexakisphosphate (IP 6 ) for viral production and primary cell replication. HIV-1 recruits IP 6 into virions using two lysine rings in its immature hexamers. Mutation of either ring inhibits IP 6 packaging and reduces viral production. Loss of IP 6 also results in virions with highly unstable capsids, leading to a profound loss of reverse transcription and cell infection. Replacement of one ring with a hydrophobic isoleucine core restores viral production, but IP 6 incorporation and infection remain impaired, consistent with an independent role for IP 6 in stable capsid assembly. Genetic knockout of biosynthetic kinases IPMK and IPPK reveals that cellular IP 6 availability limits the production of diverse lentiviruses, but in the absence of IP 6 , HIV-1 packages IP 5 without loss of infectivity. Together, these data suggest that IP 6 is a critical cofactor for HIV-1 replication., (Copyright © 2019 The Author(s). Published by Elsevier Inc. All rights reserved.)

The human immunodeficiency virus 1 (HIV-1) capsid serves as a binding platform for proteins and small molecules from the host cell that regulate various steps in the virus life cycle. However, there are currently no quantitative methods that use assembled capsid lattices to measure host-pathogen interaction dynamics. Here we developed a single-molecule fluorescence biosensor using self-assembled capsid tubes as biorecognition elements and imaged capsid binders using total internal reflection fluorescence microscopy in a microfluidic setup. The method is highly sensitive in its ability to observe and quantify binding, to obtain dissociation constants, and to extract kinetics with an extended application of using more complex analytes that can accelerate characterization of novel capsid binders.

In this issue of Cell Host & Microbe, Summers et al. (2019) use protein engineering to generate a toolbox of HIV-1 capsid oligomers. In an accompanying Cell Reports paper, Huang et al. (2019) use these oligomers to determine how the capsid engages the kinesin-1 adaptor protein FEZ1., (Crown Copyright © 2019. Published by Elsevier Inc. All rights reserved.)

Tropomyosins (Tpm) determine the functional capacity of actin filaments in an isoform-specific manner. The primary isoform in cancer cells is Tpm3.1 and compounds that target Tpm3.1 show promising results as anti-cancer agents both in vivo and in vitro. We have determined the molecular mechanism of interaction of the lead compound ATM-3507 with Tpm3.1-containing actin filaments. When present during co-polymerization of Tpm3.1 with actin, 3 H-ATM-3507 is incorporated into the filaments and saturates at approximately one molecule per Tpm3.1 dimer and with an apparent binding affinity of approximately 2 µM. In contrast, 3 H-ATM-3507 is poorly incorporated into preformed Tpm3.1/actin co-polymers. CD spectroscopy and thermal melts using Tpm3.1 peptides containing the C-terminus, the N-terminus, and a combination of the two forming the overlap junction at the interface of adjacent Tpm3.1 dimers, show that ATM-3507 shifts the melting temperature of the C-terminus and the overlap junction, but not the N-terminus. Molecular dynamic simulation (MDS) analysis predicts that ATM-3507 integrates into the 4-helix coiled coil overlap junction and in doing so, likely changes the lateral movement of Tpm3.1 across the actin surface resulting in an alteration of filament interactions with actin binding proteins and myosin motors, consistent with the cellular impact of ATM-3507.

The stability of the HIV-1 capsid and the spatiotemporal control of its disassembly, a process called uncoating, need to be finely tuned for infection to proceed. Biochemical methods for measuring capsid lattice disassembly in bulk are unable to resolve intermediates in the uncoating reaction. We have developed a single-particle fluorescence microscopy method to follow the real-time uncoating kinetics of authentic HIV capsids in vitro . The assay utilizes immobilized viral particles that are permeabilized with the a pore-former protein, and is designed to (1) detect the first defect of the capsid by the release of a solution phase marker (GFP) and (2) visualize the disassembly of the capsid over time by "painting" the capsid lattice with labeled cyclophilin A (CypA), a protein that binds weakly to the outside of the capsid. This novel assay allows the study of dynamic interactions of molecules with hundreds of individual capsids as well as to determine their effect on viral capsid stability, which provides a powerful tool for dissecting uncoating mechanisms and for the development of capsid-binding drugs., Competing Interests: Competing interestsThere are no conflicts of interest or competing interest., (©Copyright Márquez et al.)

Background: Efficient HIV-1 replication depends on interaction of the viral capsid with the host protein cyclophilin A (CypA). CypA, a peptidylprolyl isomerase, binds to an exposed loop in the viral CA protein via the enzyme's active site. Recent structural analysis of CypA in complex with CA tubes in conjunction with molecular dynamics simulations identified a secondary CA binding site on CypA that allows a bridging interaction with two hexameric subunits of the assembled CA lattice, leading to capsid stabilization (Liu et al. in Nat Commun 7:10714, 2016)., Results: We performed mutational analysis of residues that have been proposed to mediate CA binding at the secondary binding site on CypA (A25, K27, P29 and K30) and tested the effects of the amino acid substitutions using interaction assays and HIV-1 infection assays in cells. The binding of recombinant CypA to self-assembled CA tubes or native HIV-1 capsids was measured in vitro using a quantitative fluorescence microscopy binding assay revealing that affinity and stoichiometry of CypA to the CA lattice was not affected by the substitutions. To test for functionality of the CypA secondary CA-binding site in HIV-1 infection, mutant CypA proteins were expressed in cells in which endogenous CypA was deleted, and the effects on HIV-1 infection were assayed. In normal HeLa-P4 cells, infection with HIV-1 bearing the A92E substitution in CA is inhibited by endogenous CypA and was inhibited to the same extent by expression of CypA mutants in CypA-null HeLa-P4 cells. Expression of the mutant CypA proteins in CypA-null Jurkat cells restored their permissiveness to infection by wild type HIV-1., Conclusions: The amino acid changes at A25, K27, P29 and K30 did not affect the affinity of CypA for the CA lattice and did not impair CypA function in infection assays suggesting that these residues are not part of a secondary CA binding site on CypA.

Skeletal muscle tropomyosin (Tpm1.1) is an elongated, rod-shaped, alpha-helical coiled-coil protein that forms continuous head-to-tail polymers along both sides of the actin filament. In this study we use single molecule fluorescence TIRF microscopy combined with a microfluidic device and fluorescently labelled proteins to measure Tpm1.1 association to and dissociation from single actin filaments. Our experimental setup allows us to clearly resolve Tpm1.1 interactions on both sides of the filaments. Here we provide a semi-automated method for the extraction and quantification of kymograph data for individual actin filaments bound at different Tpm1.1 concentrations. We determine boundaries on the kymograph on each side of the actin filament, based on intensity thresholding, performing fine manual editing of the boundaries (if needed) and extracting user defined kinetic properties of the system. Using our analytical tools we can determine (i) nucleation point(s) and rates, (ii) elongation rates of Tpm1.1, (iii) identify meeting points after the saturation of filament, and when dissociation occurs, (iv) initiation point(s), (v) the final dissociation point(s), as well as (vi) dissociation rates. All of these measurements can be extracted from both sides of the filament, allowing for the determination of possible differences in behaviour on the two sides of the filament, and across concentrations. The robust and repeatable nature of the method allows quantitative, semi-automated analyses to be made of large studies of acto-tropomyosin interactions, as well as for other actin binding proteins or filamentous structures, opening the way for dissection of the dynamics underlying these interactions., Competing Interests: The authors have declared that no competing interests exist.

Single-molecule localization microscopy (SMLM) has created the opportunity of pushing fluorescence microscopy from being a biological imaging tool to a surface characterization and possibly even a quantitative analytical tool. The latter could be achieved by molecular counting using pointillist SMLM data sets. However, SMLM is especially sensitive to background fluorescent signals, which influences any subsequent analysis. Therefore, fabricating sensing surfaces that resist nonspecific adsorption of proteins, even after multiple modification steps, has become paramount. Herein is reported two different ways to modify surfaces: dichlorodimethylsilane-biotinylated bovine serum albumin-Tween-20 (DbT20) and poly-l-lysine grafted polyethylene glycol (PLL-PEG) mixed with biotinylated PLL-PEG (PLL-PEG/PEGbiotin). The results show that the ability to resist nonspecific adsorption of DbT20 surfaces deteriorates with an increase in the number of modification steps required after the addition of the DbT20, which limits the applicability of this surface for SMLM. As such, a new surface for SMLM that employs PLL-PEG/PEGbiotin was developed that exhibits ultralow amounts of nonspecific protein adsorption even after many modification steps. The utility of the surface was demonstrated for human influenza hemagglutinin-tagged mEos2, which was directly pulled down from cell lysates onto the PLL-PEG/PEGbiotin surface. The results strongly indicated that the PLL-PEG/PEGbiotin surface satisfies the criteria of SMLM imaging of a negligible background signal and negligible nonspecific adsorption.

Uncoating of the metastable HIV-1 capsid is a tightly regulated disassembly process required for release of the viral cDNA prior to nuclear import. To understand the intrinsic capsid disassembly pathway and how it can be modulated, we have developed a single-particle fluorescence microscopy method to follow the real-time uncoating kinetics of authentic HIV capsids in vitro immediately after permeabilizing the viral membrane. Opening of the first defect in the lattice is the rate-limiting step of uncoating, which is followed by rapid, catastrophic collapse. The capsid-binding inhibitor PF74 accelerates capsid opening but stabilizes the remaining lattice. In contrast, binding of a polyanion to a conserved arginine cluster in the lattice strongly delays initiation of uncoating but does not prevent subsequent lattice disassembly. Our observations suggest that different stages of uncoating can be controlled independently with the interplay between different capsid-binding regulators likely to determine the overall uncoating kinetics., Competing Interests: CM, DL, JW, VS, CM, AW, AA, MP, DJ, ST, TB No competing interests declared, (© 2018, Márquez et al.)

The HIV capsid is semipermeable and covered in electropositive pores that are essential for viral DNA synthesis and infection. Here, we show that these pores bind the abundant cellular polyanion IP 6 , transforming viral stability from minutes to hours and allowing newly synthesised DNA to accumulate inside the capsid. An arginine ring within the pore coordinates IP 6 , which strengthens capsid hexamers by almost 10°C. Single molecule measurements demonstrate that this renders native HIV capsids highly stable and protected from spontaneous collapse. Moreover, encapsidated reverse transcription assays reveal that, once stabilised by IP 6 , the accumulation of new viral DNA inside the capsid increases >100 fold. Remarkably, isotopic labelling of inositol in virus-producing cells reveals that HIV selectively packages over 300 IP 6 molecules per infectious virion. We propose that HIV recruits IP 6 to regulate capsid stability and uncoating, analogous to picornavirus pocket factors. HIV-1/IP 6 /capsid/co-factor/reverse transcription., Competing Interests: DM, CM, WM, CD, DJ, MA, KB, GT, AS, TB, LJ No competing interests declared, (© 2018, Mallery et al.)

Many actin filaments in animal cells are co-polymers of actin and tropomyosin. In many cases, non-muscle myosin II associates with these co-polymers to establish a contractile network. However, the temporal relationship of these three proteins in the de novo assembly of actin filaments is not known. Intravital subcellular microscopy of secretory granule exocytosis allows the visualisation and quantification of the formation of an actin scaffold in real time, with the added advantage that it occurs in a living mammal under physiological conditions. We used this model system to investigate the de novo assembly of actin, tropomyosin Tpm3.1 (a short isoform of TPM3) and myosin IIA (the form of non-muscle myosin II with its heavy chain encoded by Myh9 ) on secretory granules in mouse salivary glands. Blocking actin polymerization with cytochalasin D revealed that Tpm3.1 assembly is dependent on actin assembly. We used time-lapse imaging to determine the timing of the appearance of the actin filament reporter LifeAct-RFP and of Tpm3.1-mNeonGreen on secretory granules in LifeAct-RFP transgenic, Tpm3.1-mNeonGreen and myosin IIA-GFP (GFP-tagged MYH9) knock-in mice. Our findings are consistent with the addition of tropomyosin to actin filaments shortly after the initiation of actin filament nucleation, followed by myosin IIA recruitment., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2018. Published by The Company of Biologists Ltd.)

The disassembly of the clathrin lattice surrounding coated vesicles is the obligatory last step in their life cycle. It is mediated by the coordinated recruitment of auxilin and Hsc70, an ATP-driven molecular clamp. Here, we describe the preparation of reagents and the single-particle fluorescence microscopy imaging assay in which we visualize directly the Hsc70-driven uncoating of synthetic clathrin coats or clathrin-coated vesicles.

Competing models exist in the literature for the relationship between mutant Huntingtin exon 1 (Httex1) inclusion formation and toxicity. In one, inclusions are adaptive by sequestering the proteotoxicity of soluble Httex1. In the other, inclusions compromise cellular activity as a result of proteome co-aggregation. Using a biosensor of Httex1 conformation in mammalian cell models, we discovered a mechanism that reconciles these competing models. Newly formed inclusions were composed of disordered Httex1 and ribonucleoproteins. As inclusions matured, Httex1 reconfigured into amyloid, and other glutamine-rich and prion domain-containing proteins were recruited. Soluble Httex1 caused a hyperpolarized mitochondrial membrane potential, increased reactive oxygen species, and promoted apoptosis. Inclusion formation triggered a collapsed mitochondrial potential, cellular quiescence, and deactivated apoptosis. We propose a revised model where sequestration of soluble Httex1 inclusions can remove the trigger for apoptosis but also co-aggregate other proteins, which curtails cellular metabolism and leads to a slow death by necrosis., (Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.)

Modern fluorescence microscopy requires software-controlled illumination sources with high power across a wide range of wavelengths. Diode lasers meet the power requirements and combining multiple units into a single fiber launch expands their capability across the required spectral range. We present the NicoLase, an open-source diode laser combiner, fiber launch, and software sequence controller for fluorescence microscopy and super-resolution microscopy applications. Two configurations are described, giving four or six output wavelengths and one or two single-mode fiber outputs, with all CAD files, machinist drawings, and controller source code openly available.

Reconstitution of actin filaments on surfaces for observation of filament-associated protein dynamics by fluorescence microscopy is currently an exciting field in biophysics. Here we examine the effects of attaching actin filaments to surfaces on the binding and dissociation kinetics of a fluorescence-labeled tropomyosin, a rod-shaped protein that forms continuous strands wrapping around the actin filament. Two attachment modalities of the actin to the surface are explored: where the actin filament is attached to the surface at multiple points along its length; and where the actin filament is attached at one end and aligned parallel to the surface by buffer flow. To facilitate analysis of actin-binding protein dynamics, we have developed a software tool for the viewing, tracing and analysis of filaments and co-localized species in noisy fluorescence timelapse images. Our analysis shows that the interaction of tropomyosin with actin filaments is similar for both attachment modalities. © 2016 Wiley Periodicals, Inc., (© 2016 Wiley Periodicals, Inc.)

Protein aggregation is a hallmark of many neurodegenerative diseases, notably Alzheimer's and Parkinson's disease. Parkinson's disease is characterized by the presence of Lewy bodies, abnormal aggregates mainly composed of α-synuclein. Moreover, cases of familial Parkinson's disease have been linked to mutations in α-synuclein. In this study, we compared the behavior of wild-type (WT) α-synuclein and five of its pathological mutants (A30P, E46K, H50Q, G51D and A53T). To this end, single-molecule fluorescence detection was coupled to cell-free protein expression to measure precisely the oligomerization of proteins without purification, denaturation or labelling steps. In these conditions, we could detect the formation of oligomeric and pre-fibrillar species at very short time scale and low micromolar concentrations. The pathogenic mutants surprisingly segregated into two classes: one group forming large aggregates and fibrils while the other tending to form mostly oligomers. Strikingly, co-expression experiments reveal that members from the different groups do not generally interact with each other, both at the fibril and monomer levels. Together, this data paints a completely different picture of α-synuclein aggregation, with two possible pathways leading to the development of fibrils.

Tropomyosin (Tpm) is an α helical coiled-coil dimer that forms a co-polymer along the actin filament. Tpm is involved in the regulation of actin's interaction with binding proteins as well as stabilization of the actin filament and its assembly kinetics. Recent studies show that multiple Tpm isoforms also define the functional properties of distinct actin filament populations within a cell. Subtle structural variations within well conserved Tpm isoforms are the key to their functional specificity. Therefore, we purified and characterized a comprehensive set of 8 Tpm isoforms (Tpm1.1, Tpm1.12, Tpm1.6, Tpm1.7, Tpm1.8, Tpm2.1, Tpm3.1, and Tpm4.2), using well-established actin co-sedimentation and pyrene fluorescence polymerization assays. We observed that the apparent affinity (Kd(app)) to filamentous actin varied in all Tpm isoforms between ∼0.1-5 μM with similar values for both, skeletal and cytoskeletal actin filaments. The data did not indicate any correlation between affinity and size of Tpm molecules, however high molecular weight (HMW) isoforms Tpm1.1, Tpm1.6, Tpm1.7 and Tpm2.1, showed ∼3-fold higher cooperativity compared to low molecular weight (LMW) isoforms Tpm1.12, Tpm1.8, Tpm3.1, and Tpm4.2. The rate of actin filament elongation in the presence of Tpm2.1 increased, while all other isoforms decreased the elongation rate by 27-85 %. Our study shows that the biochemical properties of Tpm isoforms are finely tuned and depend on sequence variations in alternatively spliced regions of Tpm molecules.

Mechanisms for transcription factor recognition of specific DNA base sequences are well characterized and recent studies demonstrate that the shape of these cognate binding sites is also important. Here, we uncover a new mechanism where the transcription factor GabR simultaneously recognizes two cognate binding sites and the shape of a 29 bp DNA sequence that bridges these sites. Small-angle X-ray scattering and multi-angle laser light scattering are consistent with a model where the DNA undergoes a conformational change to bend around GabR during binding. In silico predictions suggest that the bridging DNA sequence is likely to be bendable in one direction and kinetic analysis of mutant DNA sequences with biolayer interferometry, allowed the independent quantification of the relative contribution of DNA base and shape recognition in the GabR-DNA interaction. These indicate that the two cognate binding sites as well as the bendability of the DNA sequence in between these sites are required to form a stable complex. The mechanism of GabR-DNA interaction provides an example where the correct shape of DNA, at a clearly distinct location from the cognate binding site, is required for transcription factor binding and has implications for bioinformatics searches for novel binding sites., (© The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.)

The tropomyosin family of proteins form end-to-end polymers along the actin filament. Tumour cells rely on specific tropomyosin-containing actin filament populations for growth and survival. To dissect out the role of tropomyosin in actin filament regulation we use the small molecule TR100 directed against the C terminus of the tropomyosin isoform Tpm3.1. TR100 nullifies the effect of Tpm3.1 on actin depolymerisation but surprisingly Tpm3.1 retains the capacity to bind F-actin in a cooperative manner. In vivo analysis also confirms that, in the presence of TR100, fluorescently tagged Tpm3.1 recovers normally into stress fibers. Assembling end-to-end along the actin filament is thereby not sufficient for tropomyosin to fulfil its function. Rather, regulation of F-actin stability by tropomyosin requires fidelity of information communicated at the barbed end of the actin filament. This distinction has significant implications for perturbing tropomyosin-dependent actin filament function in the context of anti-cancer drug development.

Polyglutamine (polyGln) expansions in nine human proteins result in neurological diseases and induce the proteins' tendency to form β-rich amyloid fibrils and intracellular deposits. Less well known are at least nine other human diseases caused by polyalanine (polyAla)-expansion mutations in different proteins. The mechanisms of how polyAla aggregates under physiological conditions remain unclear and controversial. We show here that aggregation of polyAla is mechanistically dissimilar to that of polyGln and hence does not exhibit amyloid kinetics. PolyAla assembled spontaneously into α-helical clusters with diverse oligomeric states. Such clustering was pervasive in cells irrespective of visible aggregate formation, and it disrupted the normal physiological oligomeric state of two human proteins natively containing polyAla: ARX and SOX3. This self-assembly pattern indicates that polyAla expansions chronically disrupt protein behavior by imposing a deranged oligomeric status.

Viruses are often thought to have static structure, and they only remodel after the viruses have entered target cells. Here, we detected a size expansion of virus particles prior to viral entry using cryo-electron microscopy (cryo-EM) and single molecule fluorescence imaging. HIV expanded both under cell-free conditions with soluble receptor CD4 (sCD4) targeting the CD4 binding site on the HIV-1 envelope protein (Env) and when HIV binds to receptor on cellular membrane. We have shown that the HIV Env is needed to facilitate receptor induced virus size expansions, showing that the 'lynchpin' for size expansion is highly specific. We demonstrate that the size expansion required maturation of HIV and an internal capsid core with wild type stability, suggesting that different HIV compartments are linked and are involved in remodelling. Our work reveals a previously unknown event in HIV entry, and we propose that this pre-entry priming process enables HIV particles to facilitate the subsequent steps in infection., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Clathrin-coated vesicles are major carriers of vesicular traffic in eukaryotic cells. This endocytic pathway relies on cycles of clathrin coat assembly and Hsc70-mediated disassembly. Here we identify histidine residues as major determinants of lattice assembly and stability. They are located at the invariant interface between the proximal and distal segments of clathrin heavy chains, in triskelions centered on two adjacent vertices of the coated-vesicle lattice. Mutation of these histidine residues to glutamine alters the pH dependence of coat stability. We then describe single-particle fluorescence imaging experiments in which we follow the effect of these histidine mutations on susceptibility to Hsc70-dependent uncoating. Coats destabilized by these mutations require fewer Hsc70 molecules to initiate disassembly, as predicted by a model in which Hsc70 traps conformational distortions during the auxilin- and Hsc70:ATP-mediated uncoating reaction., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Cells can sense and migrate towards higher concentrations of adhesive cues such as the glycoproteins of the extracellular matrix and soluble cues such as growth factors. Here, we outline a method to create opposing gradients of adhesive and soluble cues in a microfluidic chamber, which is compatible with live cell imaging. A copolymer of poly-L-lysine and polyethylene glycol (PLL-PEG) is employed to passivate glass coverslips and prevent non-specific adsorption of biomolecules and cells. Next, microcontact printing or dip pen lithography are used to create tracks of streptavidin on the passivated surfaces to serve as anchoring points for the biotinylated peptide arginine-glycine-aspartic acid (RGD) as the adhesive cue. A microfluidic device is placed onto the modified surface and used to create the gradient of adhesive cues (100% RGD to 0% RGD) on the streptavidin tracks. Finally, the same microfluidic device is used to create a gradient of a chemoattractant such as fetal bovine serum (FBS), as the soluble cue in the opposite direction of the gradient of adhesive cues.

The physical attributes of the extracellular matrix play a key role in endothelium function by modulating the morphology and phenotype of endothelial cells. Despite the recognized importance of matrix-cell interactions, it is currently not known how the arrangement of adhesive ligands affects the morphology, signal transduction processes, and migration of endothelial cells. We aimed to study how endothelial cells respond to the average spatial arrangement of integrin ligands. We designed functionalized silicon surfaces with average spacing ranging from nanometers to micrometers of the peptide arginine-glycine-aspartic acid (RGD). We found that endothelial cells adhered to and spread on surfaces independently of RGD-to-RGD spacing. In contrast, organization within focal adhesions (FAs) was extremely sensitive to ligand spacing, requiring a nanoscaled average RGD spacing of 44 nm to form lipid raft domains at FAs. The localized membrane organization strongly correlated with the signaling efficiencies of integrin activation and regulated vascular endothelial growth factor (VEGF)-induced signaling events. Importantly, this modulation in signal transduction directly affected the migratory ability of endothelial cells. We conclude that endothelial cells sense nanoscaled variations in the spacing of integrin ligands, which in turn influences signal transduction processes. Average RGD spacing similar to that found in fibronectin leads to lipid raft accumulation at FAs, enhances sensitivity to VEGF stimulation, and controls migration in endothelial cells., (Copyright © 2011 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Heat shock cognate protein-70 (Hsc70) supports remodeling of protein complexes, such as disassembly of clathrin coats on endocytic coated vesicles. To understand how a simple ATP-driven molecular clamp catalyzes a large-scale disassembly reaction, we have used single-particle fluorescence imaging to track the dynamics of Hsc70 and its clathrin substrate in real time. Hsc70 accumulates to a critical level, determined by kinetic modeling to be one Hsc70 for every two functional attachment sites; rapid, all-or-none uncoating then ensues. We propose that Hsc70 traps conformational distortions, seen previously by cryo-EM, in the vicinity of each occupied site and that accumulation of local strains destabilizes the clathrin lattice. Capture of conformational fluctuations may be a general mechanism for chaperone-driven disassembly of protein complexes.

The morphology and function of endothelial cells depends on the physical and chemical characteristics of the extracellular environment. Here, we designed silicon surfaces on which topographical features and surface densities of the integrin binding peptide arginine-glycine-aspartic acid (RGD) could be independently controlled. We used these surfaces to investigate the relative importance of the surface chemistry of ligand presentation versus surface topography in endothelial cell adhesion. We compared cell adhesion, spreading and migration on surfaces with nano- to micro-scaled pyramids and average densities of 6×10(2)-6×10(11) RGD/mm(2). We found that fewer cells adhered onto rough than flat surfaces and that the optimal average RGD density for cell adhesion was 6×10(5) RGD/mm(2) on flat surfaces and substrata with nano-scaled roughness. Only on surfaces with micro-scaled pyramids did the topography hinder cell migration and a lower average RGD density was optimal for adhesion. In contrast, cell spreading was greatest on surfaces with 6×10(8) RGD/mm(2) irrespectively of presence of feature and their size. In summary, our data suggest that the size of pyramids predominately control the number of endothelial cells that adhere to the substratum but the average RGD density governs the degree of cell spreading and length of focal adhesion within adherent cells. The data points towards a two-step model of cell adhesion: the initial contact of cells with a substratum may be guided by the topography while the engagement of cell surface receptors is predominately controlled by the surface chemistry.

The chip-scale integration of optical components is crucial for technologies as diverse as optical communications, optoelectronics displays, and photovoltaics. However, the realization of integrated optical devices from discrete components is often hampered by the lack of a universal substrate for achieving monolithic integration and by incompatibilities between materials. Emergent technologies such as chip-scale biophotonics, organic optoelectronics, and optofluidics present a host of new challenges for optical device integration, which cannot be solved with existing bonding techniques. Here, we report a new method for substrate independent integration of dissimilar optical components by way of biological recognition-directed assembly. Bonding in this scheme is achieved by locally modifying the substrate with a protein receptor and the optical component with a biomolecular ligand or vice versa. The key features of this new technology include substrate independent assembly, cross-platform vertical scale integration, and selective registration of components based on complementary biomolecular interactions.

The chaperone Hsc70 drives the clathrin assembly-disassembly cycle forward by stimulating dissociation of a clathrin lattice. A J-domain containing co-chaperone, auxilin, associates with a freshly budded clathrin-coated vesicle, or with an in vitro assembled clathrin coat, and recruits Hsc70 to its specific heavy-chain-binding site. We have determined by electron cryomicroscopy (cryoEM), at about 11 A resolution, the structure of a clathrin coat (in the D6-barrel form) with specifically bound Hsc70 and auxilin. The Hsc70 binds a previously analysed site near the C-terminus of the heavy chain, with a stoichiometry of about one per three-fold vertex. Its binding is accompanied by a distortion of the clathrin lattice, detected by a change in the axial ratio of the D6 barrel. We propose that when Hsc70, recruited to a position close to its target by the auxilin J-domain, splits ATP, it clamps firmly onto its heavy-chain site and locks in place a transient fluctuation. Accumulation of the local strain thus imposed at multiple vertices can then lead to disassembly.

Monitoring enzyme secretion in tissue culture has proved challenging because to date the activity cannot be continuously measured in situ. In this Letter, we present a solution using biopolymer loaded photonic crystals of anodized silicon. Shifts in the optical response by proteolytic degradation of the biopolymer provide label-free sensing with unprecedented low detection limits (1 pg) and calculation of kinetic parameters. The enhancement in sensitivity relative to previous photonic crystal sensors constitutes a change in the sensing paradigm because here the entire pore space is responsive to the secreted enzyme rather than just the pore walls. In situ monitoring is demonstrated by detecting secretion of matrix metalloprotease 9 from stimulated human macrophages.

The ease of fabricating high quality photonic crystals from porous silicon and its biocompatibility have inspired the conception of various biosensing schemes using this material. However, the instability of porous silicon has significantly slowed progress in this area. Here we discuss the potential of different porous silicon photonic crystals for biosensing in the context of its surface chemistry and nanostructure, both of which need to be optimized to obtain sensitive and stable devices. Of particular promise are recent approaches that use porous silicon as sensors for enzymatic activity, for cell capture and concentration devices.

In this paper we report the use of the optical properties of porous silicon photonic crystals, combined with the chemical versatility of acetylene-terminated SAMs, to demonstrate the applicability of "click" chemistry to mesoporous materials. Cu(I)-catalyzed alkyne-azide cycloaddition reactions were employed to modify the internal pore surfaces through a two-step hydrosilylation/cycloaddition procedure. A positive outcome of this catalytic process, here performed in a spatially confined environment, was only observed in the presence of a ligand-stabilized Cu(I) species. Detailed characterization using Fourier transform infrared spectroscopy and optical reflectivity measurements demonstrated that the surface acetylenes had reacted in moderate to high yield to afford surfaces exposing chemical functionalities of interest. The porous silicon photonic crystals modified by the two-step strategy, and exposing oligoether moieties, displayed improved resistance toward the nonspecific adsorption of proteins as determined with fluorescently labeled bovine serum albumin. These results demonstrate that "click" immobilization offers a versatile, experimentally simple, and modular approach to produce functionalized porous silicon surfaces for applications as diverse as porous silicon-based sensing devices and implantable biomaterials.

The 70-kDa heat-shock cognate protein (Hsc70) chaperone is an ATP-dependent "disassembly enzyme" for many subcellular structures, including clathrin-coated vesicles where it functions as an uncoating ATPase. Hsc70, and its cochaperone auxilin together catalyze coat disassembly. Like other members of the Hsp70 chaperone family, it is thought that ATP-bound Hsc70 recognizes the clathrin triskelion through an unfolded exposed hydrophobic segment. The best candidate is the unstructured C terminus (residues 1631-1675) of the heavy chain at the foot of the tripod below the hub, containing the sequence motif QLMLT, closely related to the sequence bound preferentially by the substrate groove of Hsc70 (Fotin et al., 2004b). To test this hypothesis, we generated in insect cells recombinant mammalian triskelions that in vitro form clathrin cages and clathrin/AP-2 coats exactly like those assembled from native clathrin. We show that coats assembled from recombinant clathrin are good substrates for ATP- and auxilin-dependent, Hsc70-catalyzed uncoating. Finally, we show that this uncoating reaction proceeds normally when the coats contain recombinant heavy chains truncated C-terminal to the QLMLT motif, but very inefficiently when the motif is absent. Thus, the QLMLT motif is required for Hsc-70-facilitated uncoating, consistent with the proposal that this sequence is a specific target of the chaperone.

The organic derivatization of silicon-based nanoporous photonic crystals is presented as a method to immobilize peptides for the detection of protease enzymes in solution. A narrow-line-width rugate filter, a one-dimensional photonic crystal, is fabricated that exhibits a high-reflectivity optical resonance that is sensitive to small changes in the refractive index at the pore walls. To immobilize peptide in the pore of the photonic crystal, the hydrogen-terminated silicon surface was first modified with the alkene 10-succinimidyl undecenoate via hydrosilylation. The monolayer with the succinimide ester moiety at the distal end served the dual function of protecting the underlying silicon from oxidation as well as providing a surface suitable for subsequent derivatization with amines. The surface was further modified with 1-aminohexa(ethylene glycol) (EG(6)) to resist nonspecific adsorption of proteins common in complex biological samples. The distal hydroxyl of the EG(6) is activated using the solid-phase coupling reagent disuccinimidyl carbonate for selective immobilization of peptides as protease recognition elements. X-ray photoelectron spectroscopy analysis reveals high activation and coupling efficiency at each stage of the functionalization. Exposure of the peptide-modified crystals to the protease subtilisin in solution causes a change in the refractive index, resulting in a shift of the resonance to shorter wavelengths, indicating cleavage of organic material within the pores. The lowest detected concentration of enzyme was 37 nM (7.4 pmol in 200 microL).

In this article, we report the functionalization of alkyne-terminated alkyl monolayers on Si(100) using "click" chemistry, specifically, the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction of azides with surface-bound alkynes. Covalently immobilized, structurally well-defined acetylene-terminated organic monolayers were prepared from a commercially available terminal diyne species using a one-step hydrosilylation procedure. Subsequent derivatization of the alkyne-terminated monolayers in aqueous environments with representative azide species via a selective, reliable, robust cycloaddition process afforded disubstituted surface-bound [1,2,3]-triazole species. Neither activation procedures nor protection/deprotection steps were required, as is the case with more established grafting approaches for silicon surfaces. Detailed characterization using X-ray photoelectron spectroscopy and X-ray reflectometry demonstrated that the surface acetylenes had reacted in moderate to high yield to give surfaces exposing alkyl chains, oligoether anti-fouling moieties, and functionalized aromatic structures. These results demonstrate that click immobilization offers a versatile, experimentally simple, chemically unambiguous modular approach to producing modified silicon surfaces with organic functionality for applications as diverse as biosensors and molecular electronics.

Porous silicon has shown potential for various applications in biology and medicine, which require that the material (1) remain stable for the length of the intended application and (2) resist non-specific adsorption of proteins. Here we explore the efficacy of short oligo(ethylene glycol) moieties incorporated into organic layers via two separate strategies in achieving these aims. In the first strategy the porous silicon structure was modified in a single step via hydrosilylation of alpha-oligo(ethylene glycol)-omega-alkenes containing three or six ethylene glycol units. The second strategy employs two steps: (1) hydrosilylation of succinimidyl-10-undecenoate and (2) coupling of an amino hexa(ethylene glycol) species. The porous silicon photonic crystals modified by the two-step strategy displayed greater stability relative to the single step procedure when exposed to conditions of physiological temperature and pH. Both strategies produced layers that resist non-specific adsorption of proteins as determined with fluorescently labelled bovine serum albumin. The antifouling behaviour and greater stability to physiological conditions provided by this chemistry enhances the suitability of porous silicon for biomaterials applications.

Cholera toxin levels are optically detected by affinity capture within hybrid lipid bilayer membranes formed in the nanostructures of porous silicon photonic crystals.

Self-assembled monolayers formed by thermal hydrosilylation of a trifluoroacetyl-protected alkenylthiol on Si-H surfaces, followed by removal of the protecting groups, yield essentially oxide-free monolayers suitable for the formation of Si-C11H22-S-Hg and Si-C11H22-S-Au junctions in which the alkyl chains are chemically bound to the silicon surface (via Si-C bonds) and the metal electrode (via Hg-S or Au-S bonds). Two barriers to charge transport are present in the system: at low bias the current is temperature activated and hence limited by thermionic emission over the Schottky barrier in the silicon, whereas as at high bias transport is limited by tunneling through the organic monolayer. The thiol-terminated monolayer on oxide-free silicon provides a well-characterized system allowing a careful study of the importance of the interfacial bond to the metal electrode for current transport through saturated molecules.

We show that the electrode/molecule chemical bond does not change the tunneling barrier for charge transport through alkyl chain monolayers sandwiched between Si and Hg electrodes. This observation can be understood if the interfacial bond mainly governs the monolayer's structure, while the electronic states due to molecule-electrode bonding do not contribute significantly to tunneling. Yet, the nature of the bond affects the Schottky barrier inside the semiconductor due to changes in the interface dipole.

Arrays of aligned carbon nanotubes formed by self-assembly on a Si (100) surface are described. The surface of a Si (100) wafer has been modified by reaction of hydride-terminated Si (100) with ethyl undecylenate to give ethyl undecanoate self-assembled monolayers (SAMs) which were linked by stable silicon-carbon covalent bonds. The ester terminus of the monolayer was converted to an alcohol whereupon shortened carbon nanotubes were covalently attached using carbodiimide coupling. The formation of the SAM and its subsequent modification with nanotubes has been followed using a series of techniques including X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), scanning electron microscopy (SEM), IR spectroscopy and cyclic voltammetry.

Monolayers of alkyl chains, attached through direct Si-C bonds to Si(111), via phosphonates to GaAs(100) surfaces, or deposited as alkyl-silane monolayers on SiO2, are investigated by ultraviolet and inverse photoemission spectroscopy and X-ray absorption spectroscopy. Exposure to ultraviolet radiation from a He discharge lamp, or to a beam of energetic electrons, leads to significant damage, presumably associated with radiation- or electron-induced H-abstraction leading to carbon-carbon double-bond formation in the alkyl monolayer. The damage results in an overall distortion of the valence spectrum, in the appearance of (occupied) states above the highest occupied molecular orbital of the alkyl molecule, and in a characteristic (unoccupied state) pi resonance at the edge of the carbon absorption peak. These distortions present a serious challenge for the interpretation of the electronic structure of the monolayer system. We show that extrapolation to zero damage at short exposure times eliminates extrinsic features and allows a meaningful extraction of the density of state of the pristine monolayer from spectroscopy measurements.

We study the effect of monolayer quality on the electrical transport through n-Si/C(n)H(2n+1)/Hg junctions (n = 12, 14, and 18) and find that truly high quality layers and only they, yield the type of data, reported by us in Phys. Rev. Lett. 2005, 95, 266807, data that are consistent with the theoretically predicted behavior of a Schottky barrier coupled to a tunnel barrier. By using that agreement as our starting point, we can assess the effects of changing the quality of the alkyl monolayers, as judged from ellipsometer, contact angle, XPS, and ATR-FTIR measurements, on the electrical transport. Although low monolayer quality layers are easily identified by one or more of those characterization tools, as well as from the current-voltage measurements, even a combination of characterization techniques may not suffice to distinguish between monolayers with minor differences in quality, which, nevertheless, are evident in the transport measurement. The thermionic emission mechanism, which in these systems dominates at low forward bias, is the one that is most sensitive to monolayer quality. It serves thus as the best quality control. This is important because, even where tunneling characteristics appear rather insensitive to slightly diminished quality, their correct analysis will be affected, especially if layers of different lengths are also of different quality.