Search

In this paper, we account for the research efforts that have been started, for some among us, already since 2003, and aimed to the design of a class of exotic architectured, optimized (meta) materials. At the first stage of these efforts, as it often happens, the research was based on the results of mathematical investigations. The problem to be solved was stated as follows: determine the material (micro)structure governed by those equations that specify a desired behavior. Addressing this problem has led to the synthesis of second gradient materials. In the second stage, it has been necessary to develop numerical integration schemes and the corresponding codes for solving, in physically relevant cases, the chosen equations. Finally, it has been necessary to physically construct the theoretically synthesized microstructures. This has been possible by means of the recent developments in rapid prototyping technologies, which allow for the fabrication of some complex (micro)structures considered, up to now, to be simply some mathematical dreams. We show here a panorama of the results of our efforts (1) in designing pantographic metamaterials, (2) in exploiting the modern technology of rapid prototyping, and (3) in the mechanical testing of many real prototypes. Among the key findings that have been obtained, there are the following ones: pantographic metamaterials (1) undergo very large deformations while remaining in the elastic regime, (2) are very tough in resisting to damage phenomena, (3) exhibit robust macroscopic mechanical behavior with respect to minor changes in their microstructure and micromechanical properties, (4) have superior strength to weight ratio, (5) have predictable damage behavior, and (6) possess physical properties that are critically dictated by their geometry at the microlevel. [ABSTRACT FROM AUTHOR]

Fibre-reinforced plates and shells are finding an increasing interest in engineering applications; in most cases dynamic phenomena need to be taken into account. Consequently, effective and robust computational tools are sought in order to provide reliable results for the analysis of such structural models. In this paper the mixed assumed-strain laminated plate element, previously used for static analyses, has been extended to the dynamic realm. This model is derived within the framework of the so-called First-order Shear Deformation Theory (FSDT). What is peculiar in this assumed-strain finite element is that in-plane strain components are modeled directly; the corresponding stress components are deduced via constitutive law. By enforcing the equilibrium equations for each lamina, and taking continuity requirements into account, the out-of-plane shear stresses are computed and, finally, constitutive law provides the corresponding strains. The resulting global strain field depends only on a fixed number of parameters, regardless of the total number of layers. Since the proposed element is not locking-prone, even in the thin plate limit, and provides an accurate description of inter-laminar stresses, an extension to the dynamic range seems to be particularly attractive. The same kinematic assumptions will lead to the formulation of a consistent mass matrix. The element, developed in this way, has been extensively tested for several symmetric lamination sequences; comparison with available analytical solutions and with numerical results obtained by refined 3-D models are also presented. [ABSTRACT FROM AUTHOR]

In this paper, a simplified analytic model for the dynamic behaviour of railway catenary wire is presented. The model is discussed and validated with the help of numerical results obtained by a finite element code, for the case of a typical Italian railway installation. The simplified model is convenient from the computational point of view and is useful for sensitivity analysis. Some parametric studies have been developed by considering as free parameters the velocity and the distance of the train pantographs and looking at their effect on catenary dynamics. [ABSTRACT FROM AUTHOR]

The Sardinia Radio Telescope (SRT), located near Cagliari (Italy), is the world’s second largest fully steerable radio telescope endowed with an active-surface system. Its primary mirror has a quasi-parabolic shape with a diameter of 64 m. The configuration of the primary mirror surface can be modified by means of electro-mechanical actuators. This capability ensures, within a fixed range, the balancing of the deformation caused, for example, by loads such as self-weight, thermal effects and wind pressure. In this way, the difference between the ideal shape of the mirror (which maximizes its performances) and the actual surface can be reduced. In this paper the authors describe the characteristics of the SRT, the close-range photogrammetry (CRP) survey developed in order to set up the actuator displacements, and a finite element model capable of accurately estimating the structural deformations. Numerical results are compared with CRP measurements in order to test the accuracy of the model. [ABSTRACT FROM AUTHOR]

The 64 m diameter Sardinia Radio Telescope (SRT), located near Cagliari (Italy), is the world’s second largest fully steerable radio telescope with an active surface. Among its peculiarities is the capability of modifying the configuration of the primary mirror surface by means of electromechanical actuators. This capability enables, within a fixed range, balancing of the deformation caused by external loads. In this way, the difference between the ideal shape of the mirror (which maximizes its performance) and the actual surface can be reduced. The control loop of the radio telescope needs a procedure that is able to predict SRT deformation, with the required accuracy, in order to reduce deviation from the ideal shape. To achieve this aim, a finite element model that can accurately predict the displacements of the structure is required. Unfortunately, the finite element model of the SRT, although very refined, does not give completely satisfactory results, since it does not take into account essential pieces of information, for instance, thermal strains and assembly defects. This paper explores a possible update of the finite element model using only the benchmark data available, i.e. the photogrammetric survey developed during the setup of the reflecting surface. This updating leads to a significant reduction in the differences between photogrammetric data and results of the numerical model. The effectiveness of this tuning procedure is then assessed. [ABSTRACT FROM AUTHOR]

A curved beam element based on the Timoshenko model and non-uniform rational B-splines (NURBS) interpolation both for geometry and displacements is presented. Such an element can be used to suitably analyse plane-curved beams and arches. Some numerical results will explore the effectiveness and accuracy of this novel method by comparing its performance with those of some accurate finite elements proposed in the technical literature, and also with analytical solutions: for the cases where such closed-form solutions were not available in the literature, they have been computed by exact integration of the governing differential equations. It is shown that the presented element is almost insensitive to both membrane- and shear-locking, and that such phenomena can be easily controlled by properly choosing the number of elements or the NURBS degree. [ABSTRACT FROM AUTHOR]

The current development of the isogeometric approach in various fields of mechanics is explained by the high-accuracy results which can be achieved at a reduced computational cost by codes based on non-uniform rational B-splines (NURBS). In the case of strongly curved beams the simple diagonal de Saint-Venant’s constitutive model can lead to significant errors as it has been reported in the classic literature. Other models such as Winkler’s have been proposed and seem more suitable for these kinds of structures. Unfortunately several numerical codes are based on a diagonal constitutive model which neglects the coupling effect of elongation and curvature even if a highly refined geometry description can be developed by means of NURBS. The results obtained by means of numerical codes based on isogeometrical analysis for curved beams are here reported and basic choices, computational costs and numerical accuracy of the above-mentioned constitutive models are discussed, from a qualitative and quantitative point of view. This comparison, in the authors’ opinion, is necessary to avoid an excessive gap between the computational efficiency of NURBS, which are capable of very accurate geometry description, and a simplistic representation of the constitutive relations that is efficient for straight beams but not so much for curved beams whose curvature is large. The results of some selected tests are presented and discussed to highlight differences between the two approaches, showing that the small increase of computational cost of Winkler’s model is well compensated by the accuracy gain. [ABSTRACT FROM AUTHOR]