Search

Osteoarthritis is a ubiquitous disease in dogs. The purpose of this retrospective study was to characterize the severity and distribution of osteoarthritis (OA) within the joint and to identify differences among dog breeds in the severity of OA in the cranial cruciate ligament (CCL)-deficient stifle joint. Radiographs of 240 stifles from 51 Boxers, 66 German Shepherds, 100 Labrador Retrievers, and 23 Siberian Huskies with confirmed CCL rupture were included. Radiographs of the stifle joint were evaluated and OA severity was graded at 33 sites within and around the joint, and patella alta was graded as present or absent for a potential total stifle OA score of 100. Osteophyte size was correlated to OA severity score. Total OA scores were calculated and compared within and between breeds globally as well as at each joint site. Dogs weighing >35 kg had a higher total OA score than those weighing

OBJECTIVE To investigate the influence of 4 biomechanical parameters on canine cranial cruciate ligament (CrCL)-intact and -deficient stifle joints. SAMPLE Data for computer simulations of a healthy 5-year-old 33-kg neutered male Golden Retriever in a previously developed 3-D rigid body pelvic limb computer model simulating the stance phase during walking. PROCEDURES Canine stifle joint biomechanics were assessed when biomechanical parameters (CrCL stiffness, CrCL prestrain, body weight, and stifle joint friction coefficient) were altered in the pelvic limb computer simulation model. Parameters were incrementally altered from baseline values to determine the influence on stifle joint outcome measures (ligament loads, relative tibial translation, and relative tibial rotation). Stifle joint outcome measures were compared between CrCL-intact and -deficient stifle joints for the range of parameters evaluated. RESULTS In the CrCL-intact stifle joint, ligament loads were most sensitive to CrCL prestrain. In the CrCL-deficient stifle joint, ligament loads were most sensitive to body weight. Relative tibial translation was most sensitive to body weight, whereas relative tibial rotation was most sensitive to CrCL prestrain. CONCLUSIONS AND CLINICAL RELEVANCE In this study, computer model sensitivity analyses predicted that CrCL prestrain and body weight influenced stifle joint biomechanics. Cranial cruciate ligament laxity may influence the likelihood of CrCL deficiency. Body weight could play an important role in management of dogs with a CrCL-deficient stifle joint.

OBJECTIVE To assess intraobserver repeatability and interobserver and in vivo versus photographic agreement of a scoring system for the implant-skin interface (ISI) of external skeletal fixation (ESF). SAMPLE 42 photographs of ISIs from 18 dogs for interobserver agreement and intraobserver repeatability and 27 photographs of ISIs from 6 dogs for in vivo versus photograph agreement. PROCEDURES An ISI inflammation scoring system was developed. It included scales for 6 metrics (erythema, drainage amount, drainage type, swelling, hair loss or lack of hair regrowth, and granulation tissue). Photographs of the ISI of ESF were obtained by use of a standard protocol and evaluated to determine intraobserver repeatability and interobserver agreement (Cronbach α; 4 raters) of the ISI score. Agreement between in vivo and photographic ISI scores (2 raters) and correlation between median scores across metrics were evaluated. RESULTS 42 photographs met the inclusion criteria. Overall intraclass correlation coefficients ranged from 0.922 to 0.975. Interobserver overall Cronbach α ranged from 0.835 to 0.943. For in vivo versus photographic assessment, 27 ISIs in 6 dogs and their photographs were evaluated. The Cronbach α for both raters ranged from 0.614 to 0.938. Overall, the Cronbach α ranged from 0.725 to 0.932. Mean photographic scores were greater than mean in vivo scores for each metric. Pearson correlation coefficients ranged from 0.221 to 0.923. Erythema, swelling, and granulation were correlated with all other metrics. CONCLUSIONS AND CLINICAL RELEVANCE In this study, an ISI scoring system used in this study had high repeatability and agreement and may therefore be considered for use in clinical situations. Photographic scores were not equivalent to in vivo scores and should not be used interchangeably.

Objective To evaluate the effects of tibial tuberosity advancement (TTA) on canine biomechanics in the cranial cruciate ligament (CrCL)-deficient stifle using a 3-dimensional quasi-static rigid body pelvic limb computer model simulating the stance phase of gait. Study Design Computer simulations. Animals A 5-year-old neutered male Golden Retriever weighing 33 kg. Methods A TTA was implemented in a previously developed canine pelvic limb computer model using the tibial plateau slope and common tangent planning techniques. Ligament loads, relative tibial translation, and relative tibial rotation were determined and compared to CrCL-intact and CrCL-deficient stifles. Results The TTA significantly decreased peak caudal cruciate ligament load, significantly increased peak lateral collateral ligament load, and significantly changed peak medial collateral ligament load occurrence, while there was no significant difference in peak patellar ligament load compared to the CrCL-intact stifle. Compared to the CrCL-deficient stifle, peak caudal cruciate, lateral collateral and medial collateral ligament loads significantly decreased, while peak patellar ligament load was similar, peak relative tibial translation significantly decreased and peak relative tibial rotation was converted to external rotation in the TTA-treated stifle. Each TTA planning technique generated similar caudal cruciate, medial collateral, and patellar ligament loading as well as relative tibial translation, but lateral collateral ligament loading and occurrence of relative tibial rotation differed significantly across the techniques. Conclusions Model-predicted stifle ligament loads improved following TTA compared to the CrCL-deficient stifle, but TTA did not restore CrCL-intact stifle biomechanics. The TTA effectively reduced tibial translation, but tibial rotation was not stabilized.

Veterinary medicine has undergone a rapid increase in specialization over the last three decades. Veterinarians now routinely perform joint replacement, neurosurgery, limb-sparing surgery, interventional radiology, radiation therapy, and other complex medical procedures. Many procedures involve advanced imaging and surgical planning. Evidence-based medicine has also become part of the modus operandi of veterinary clinicians. Modeling and additive manufacturing can provide individualized or customized therapeutic solutions to support the management of companion animals with complex medical problems. The use of metal additive manufacturing is increasing in veterinary orthopedic surgery. This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.

Cats have orthopedic problems, including osteoarthritis, fractures, and luxations that are positively impacted by physical rehabilitation. Most cats have an independent behavior that requires using a tactful approach to rehabilitation. Cats often do well with manual therapy and electrophysical modalities. Feline rehabilitation sessions may be shorter than canine rehabilitation sessions. Cats do best with therapeutic exercises when these exercises are linked to hunting, playing, or feeding.

A comprehensive physiotherapy plan for neurology patients manages pain, prevents secondary complications, and supports the health and function of musculoskeletal tissues during recovery. Neurologically impaired patients range in ability from complete immobility (tetraplegia/paraplegia), partial mobility (tetraparesis/paraparesis), mild ataxia, to pain only. Important considerations for the design of a physiotherapy program include access to the patient, level of staff support, and safety of staff, patient, and client during treatments. A thorough overview of the treatment plan and expected outcome should be discussed with the client at the onset of therapy and should be reviewed frequently, particularly as the patient's status changes.

Therapeutic exercises are the cornerstone of the rehabilitation programs of companion animals. Therapeutic exercises are used to improve active joint range of motion, to improve weight bearing and limb use, to build strength and muscle mass, and to increase conditioning (eg, endurance, speed). Each case is unique as chronicity, type of injury, patient signalment and temperament, owner compliance, and level of required functional recovery vary widely. Therapeutic exercises are also essential for partial return to work or performance and to learn to perform activities of daily living after injury or surgery.

Exoprostheses are devices that are secured to incomplete limbs to enable locomotion. By comparison, orthoses are devices externally applied to support or protect an injured body part. Orthoses also can be used to control, guide, protect, limit motion of, or immobilize an extremity, a joint, or a body segment. Exoprostheses and orthoses are a growing aspect of the physical rehabilitation of companion animals. They require precise design and fabrication. Patients and owners must be trained to use the devices. Exoprostheses and orthoses can have a profound beneficial impact on the mobility and the quality of life of companion animals.

SummaryComponent malalignment and impingement are possible causes of recurrent luxation following total hip replacement in the dog. In the two cases presented in this report, luxation that was probably due to impingement was managed by exchanging the standard 17 mm prosthetic head for a 24 mm prosthetic head. This required removal of the original acetabular cup liner and placement of a new polyethylene liner that would accept the 24 mm head into the stable acetabular shell. In the first case, a 50 kg Malamute dog, recurrent luxation was initially managed by component alignment revision, iliofemoral suture, triple pelvic osteotomy and a novel lasso technique, without long-term success. After exchanging the head and cup liner, luxation did not recur over a 12-month period. In the second case, a 65 kg Newfoundland dog, impingement was suspected after a second luxation event. Luxation did not recur during the nine months after exchange of the head and cup liner. The larger prosthetic head used in these two cases increased the impingement-free range-of-motion of the joint and increased the translation distance required for luxation (jump distance).

SummaryObjective: To report complications in dogs with naturally occurring cranial cruciate ligament rupture following single-stage bilateral tibial tuberosity advancement (SS-BTTA) procedures, and to compare these complications to a population of dogs undergoing unilateral tibial tuberosity advancement (UTTA).Methods: Medical records and radiographs of client-owned dogs treated with tibial tuberosity advancement between August 2008 and December 2011 were reviewed. Forty-four client-owned dogs with bilateral cranial cruciate ligament rupture that underwent SS-BTTA procedures and 82 client-owned dogs that underwent UTTA proced -ures were randomly selected from our hospital population. Complications were recorded and analysed. Major complications were defined as fractures or any complication requiring a second surgery. Minor complications were any problem identified that did not require surgical management.Results: Incidence for major and minor complications in the UTTA group was 2.3% and 24.4%, respectively. Incidence for major and minor complications in the SS-BTTA group was 12.5% and 26.1%, respectively. Single-stage bilateral tibial tuberosity advancement procedures had a four- to five-fold increase in odds of a major complication (p Clinical significance: The findings of our study indicate that SS-BTTA procedures are associated with an increased risk of major complications compared to UTTA procedures.

In total hip arthroplasty (THA), the femoral stem can be fixed with or without bone cement. Cementless stem fixation is recommended for young and active patients as it eliminates the risk of loss of fixation at the bone-cement and cement-implant interfaces. Cementless fixation, however, suffers from a relatively high early revision rate. In the current research, a novel low-stiffness hip stem was designed, fabricated and tested. The stem design provided the option to inject biodegradable bone cement that could enhance initial stem stability. The stem was made of Ti6Al4V alloy. The proximal portion of the stem was porous, with cubic cells. The stem was fabricated using electron beam melting (EBM) technology and tested in compression and bending. Finite-element analysis was used to evaluate stem performance under a dynamic load representing a stair descending cycle and compare it to the performance of a solid stem with similar geometry. The von Mises stresses and maximum principal strains generated within the bone increased after porous stem insertion compared to solid stem insertion. The low-modulus stem tested in this study has acceptable mechanical properties and generates strain patterns in bone that appear compatible with clinical use.

Transcutaneous osseointegrated prostheses provide stable connections to the skeleton while eliminating skin lesions experienced with socket prosthetics. Additive manufacturing can create custom textured implants capable of interfacing with amputees’ residual bones. Our objective was to compare osseointegration of textured surface implants made by electron beam melting (EBM), an additive manufacturing process, to machine threaded implants. Whole body vibration was investigated to accelerate osseointegration. Two cohorts of Sprague-Dawley rats received bilateral, titanium implants (EBM vs. threaded) in their tibiae. One cohort comprising five groups vibrated at 45 Hz: 0.0 (control), 0.15, 0.3, 0.6 or 1.2 g was followed for six weeks. Osseointegration was evaluated through torsional testing and bone volume fraction (BV/TV). A second cohort, divided into two groups (control and 0.6 g), was followed for 24 days and evaluated for resonant frequency, bone-implant contact (BIC) and fluorochrome labeling. The EBM textured implants exhibited significantly improved mechanical stability independent of vibration, highlighting the benefits of using EBM to produce custom textured surfaces. Bone formation on and around the EBM textured implants increased compared to machined implants, as seen by BIC and fluorescence. No difference in torque, BIC or fluorescence among vibration levels was detected. BV/TV significantly increased at 0.6 g compared to control for both implant types.

OBJECTIVE To assess 3-D geometry of the humerus of dogs and determine whether the craniocaudal canal flare index (CFI) is associated with specific geometric features. SAMPLE CT images (n = 40) and radiographs (38) for 2 groups of skeletally mature nonchondrodystrophic dogs. PROCEDURES General dimensions (length, CFI, cortical thickness, and humeral head offset), curvature (shaft, humeral head, and glenoid cavity), version (humeral head and greater tubercle), and torsion were evaluated on CT images. Dogs were allocated into 3 groups on the basis of the craniocaudal CFI, and results were compared among these 3 groups. The CT measurements were compared with radiographic measurements obtained for another group of dogs. RESULTS Mean ± SD humeral head version was −75.9 ± 9.6° (range, −100.7° to −59.4°). Mean mechanical lateral distal humeral angle, mechanical caudal proximal humeral angle, and mechanical cranial distal humeral angle were 89.5 ± 3.5°, 50.2 ± 4.5°, and 72.9 ± 7.8°, respectively, and did not differ from corresponding radiographic measurements. Mean humeral curvature was 20.4 ± 4.4° (range, 9.6° to 30.5°). Mean craniocaudal CFI was 1.74 ± 0.18 (range, 1.37 to 2.10). Dogs with a high craniocaudal CFI had thicker cranial and medial cortices than dogs with a low craniocaudal CFI. Increased body weight was associated with a lower craniocaudal CFI. Radiographic and CT measurements of craniocaudal CFI and curvature differed significantly. CONCLUSIONS AND CLINICAL RELEVANCE CT-based 3-D reconstructions allowed the assessment of shaft angulation, torsion, and CFI. Radiographic and CT measurements of shaft curvature and CFI may differ.

OBJECTIVE To assess the repeatability and accuracy of polymer replicas of small, medium, and large long bones of small animals fabricated by use of 2 low-end and 2 high-end 3-D printers. SAMPLE Polymer replicas of a cat femur, dog radius, and dog tibia were fabricated in triplicate by use of each of four 3-D printing methods. PROCEDURES 3-D renderings of the 3 bones reconstructed from CT images were prepared, and length, width of the proximal aspect, and width of the distal aspect of each CT image were measured in triplicate. Polymer replicas were fabricated by use of a high-end system that relied on jetting of curable liquid photopolymer, a high-end system that relied on polymer extrusion, a triple-nozzle polymer extrusion low-end system, and a dual-nozzle polymer extrusion low-end system. Polymer replicas were scanned by use of a laser-based coordinate measurement machine. Length, width of the proximal aspect, and width of the distal aspect of the scans of replicas were measured and compared with measurements for the 3-D renderings. RESULTS 129 measurements were collected for 34 replicas (fabrication of 1 large long-bone replica was unsuccessful on each of the 2 low-end printers). Replicas were highly repeatable for all 3-D printers. The 3-D printers overestimated dimensions of large replicas by approximately 1%. CONCLUSIONS AND CLINICAL RELEVANCE Low-end and high-end 3-D printers fabricated CT-derived replicas of bones of small animals with high repeatability. Replicas were slightly larger than the original bones.

Hip dysplasia is among the most common orthopedic conditions affecting dogs. Joint laxity is responsible for abnormal development of the femoral head and acetabulum, leading to excessive wear of the articular cartilage. Wear leads to secondary osteoarthritis. Rehabilitation is either conservative or after surgical management. Conservative rehabilitation therapies are directed at decreasing pain, improving hip range of motion (ROM), and building or maintaining muscle mass. Postoperatively, rehabilitation focuses on decreasing postoperative pain and inflammation, improving comfort and limb use, and protecting the surgical site. Once the patient has healed, rehabilitation is directed at improving ROM and promoting muscle mass.

Open cellular structures fabricated in Ti6Al4V using the electron beam melting (EBM) process have been proposed for tissue scaffolds and low stiffness implants that approximate the properties of bone. The properties of these structures, regardless of cell geometry, have often been determined through compressive testing, and very few of these studies have investigated the flexural properties. For certain types of implants that are designed to fill very large segmental defects in appendicular bones, such as those used in limb sparing, compression testing does not provide the necessary insight into the complex loading states typical of bending. In this study, EBM-fabricated Ti6Al4V prismatic bars, populated with rhombic dodecahedron unit cells of various sizes and relative densities, were subjected to four-point flexure tests. While the results generally follow the power scaling models of Gibson and Ashby, the use of these models as a design tool is limited by machine resolution, particularly when producing structures with small pore sizes required for bone ingrowth.

Transdermal osseointegrated prostheses (TOPs) are emerging as an alternative to socket prostheses. Electron beam melting (EBM) is a promising additive manufacturing technology for manufacture of custom, freeform titanium alloy (Ti6Al4V) implants. Skin ongrowth for infection resistance and mechanical stability are critically important to the success of TOP, which can be influenced by material composition and surface characteristics. We assessed viability and proliferation of normal human epidermal keratinocytes (NHEK) and normal human dermal fibroblasts (NHDF) on several Ti6Al4V surfaces: solid polished commercial, solid polished EBM, solid unpolished EBM and porous unpolished EBM. Cell proliferation was evaluated at days 2 and 7 using alamarBlue ® and cell viability was analyzed with a fluorescence-based live–dead assay after 1 week. NHDF and NHEK were viable and proliferated on all Ti6Al4V surfaces. NHDF proliferation was highest on commercial and EBM polished surfaces. NHEK was highest on commercial polished surfaces. All EBM Ti6Al4V discs exhibited an acceptable biocompatibility profile compared to solid Ti6Al4V discs from a commercial source for dermal and epidermal cells. EBM may be considered as an option for fabrication of custom transdermal implants.

Objective To evaluate the influence of epidemiologic, surgical, and mechanical factors on the durations of bone consolidation and external fixation after distraction osteogenesis in dogs. Study Design Retrospective cohort study. Sample Population Dogs (n = 115) that had corrective osteotomy with circular external fixation (CEF; n = 152) Methods Medical and radiographic records (1992–2012) of dogs that had corrective osteotomies were reviewed. Putative variables included age, weight, gender, and breed. Surgery date, delay before distraction, rate and duration of distraction, mechanical complications, and frame removal date were recorded. Radiographic data included bone operated, bone length, osteotomy site, bone and limb size at osteotomy site, distraction distance, and CEF frame size and stiffness. Results Mean ± SD bone consolidation period was 56 ± 33 days. Mean duration of external fixation was 77 ± 35 days. Twelve fixation failures occurred. Radii healed faster than tibiae (P

Objectives To compare von Frey mechanical quantitative sensory thresholds (mQSTvF) between pelvic limbs in dogs before unilateral total hip replacement (THR) surgery; to correlate ground reaction forces (GRF) with mQSTvF; to assess changes in mQSTvF after THR surgery. Study Design Prospective clinical study. Animals Dogs (n = 44). Methods mQSTvF and GRF measured using a pressure sensitive walkway were evaluated before, and 3, 6, and 12 months after, unilateral THR. Measurements were recorded from the affected (operated) pelvic limb (APL) and the non-operated pelvic limb (NPL). Random effects analysis and forwards stepwise linear regression models were used to evaluate the influence of time since surgery and patient factors on mQSTvF thresholds. Results There were no significant correlations between mQSTvF data and age, bodyweight or the GRF variables. Preoperative mQSTvF measured at the APL and NPL did not differ (P = .909). mQSTvF thresholds increased significantly after 12 months in NPL (P = .047) and APL (P = .001). In addition to time, APL mQSTvF values were significantly affected by sex (higher in males, P = .010) and body condition score (higher in leaner dogs, P = .035) and NPL mQSTvF values by sex (P = .038). Conclusion Successful unilateral THR results in decreased central sensitization after 12 months.

Purpose – The aim of this study is to describe an improved experimental substrate for the mechanical testing of patient-specific implants fabricated using direct metal additive manufacturing processes. This method reduces variability and sample size requirements and addresses the importance of geometry at the bone/implant interface. Design/methodology/approach – Short-fiber glass/resin materials for cortical bone and polyurethane foam materials for cancellous bone were evaluated using standard tensile coupons. A method for fabricating bone analogs with patient-specific geometries using rapid tooling is presented. Bone analogs of a canine radius were fabricated and compared to cadaveric specimens in several biomechanical tests as validation. Findings – The analog materials exhibit a tensile modulus that falls within the range of expected values for cortical and cancellous bone. The tensile properties of the cortical bone analog vary with fiber loading. The canine radius models exhibited similar mechanical properties to the cadaveric specimens with a reduced variability. Research limitations/implications – Additional replications involving different bone geometries, types of bone and/or implants are required for a full validation. Further, the materials used here are only intended to mimic the mechanical properties of bone on a macro scale within a relatively narrow range. These analog models have not been shown to address the complex microscopic or viscoelastic behavior of bone in the present study. Originality/value – Scientific data on the formulation and fabrication of bone analogs are absent from the literature. The literature also lacks an experimental platform that matches patient-specific implant/bone geometries at the bone implant interface.

Objectives To describe clinical, radiographic, and computed tomographic (CT) assessment of biapical deformities of the radius in dogs and evaluate the effectiveness of their management by use of bilevel hinged circular external fixation frames. Study design Prospective, non-randomized cohort study. Animals Dogs (N = 26: 13 with 14 limbs operated, 13 controls). Methods CT scans of the forelimbs were performed and CT-based polymer replicas prepared. Rotation within the elbow joint, varus of the proximal portion of the radius, radial torsion, valgus of the distal portion of the radius, procurvatum, and rotation within the carpal joint were measured on radiographs, on polymer replicas, and on CT scans. Bilevel hinged circular external fixation frames were assembled on polymer replicas and identical frames were placed on dogs. Torsion was corrected acutely and angulation was corrected progressively. Functional outcome was assessed subjectively. Results Buckling was present preoperatively in operated limbs. Mean (±SD) varus of the proximal portion of the radius was 36 ± 8°, valgus of the distal portion of the radius was 32 ± 5°, external radial torsion was 35 ± 6°, procurvatum was 41 ± 10°, and medial translation was 44 ± 11 mm. Treatment duration was 80 ± 24 days. Buckling was not observed after surgery. Lameness scores improved in all dogs (P

Objective—To investigate the influence of varying morphological parameters on canine stifle joint biomechanics by use of a 3-D rigid-body canine pelvic limb computer model that simulated an intact and cranial cruciate ligament (CrCL)–deficient stifle joint across the stance phase of gait at a walk. Sample—Data from computer simulations. Procedures—Computer model morphological parameters, including patellar ligament insertion location, tibial plateau angle (TPA), and femoral condyle diameter (FCD), were incrementally altered to determine their influence on outcome measures (ligament loads, relative tibial translation, and relative tibial rotation) during simulation of the stance phase of gait at a walk. Outcome measures were assessed for each scenario and compared between an intact and CrCL-deficient stifle joint with the sensitivity index (the percentage change in outcome measure divided by the percentage change in input parameter). Results—In a CrCL-intact stifle joint, ligament loads were most sensitive to TPA. In a CrCL-deficient stifle joint, outcome measures were most sensitive to TPA with the exception of caudal cruciate ligament and lateral collateral ligament loads, which were sensitive to FCD and TPA. Relative tibial translation was sensitive to TPA and patellar ligament insertion location, whereas relative tibial rotation was most sensitive to TPA. Conclusions and Clinical Relevance—The computer model sensitivity analyses predicted that individual parameters, particularly TPA and FCD, influence stifle joint biomechanics. Therefore, tibial and femoral morphological parameters may affect the likelihood, prevention, and management of CrCL deficiency.

Objective To compare the mechanical properties of feline ilial fractures stabilized with either a plate (P), or a plate and IM pin (P + P). Study Design Mechanical study. Sample Population Cadaveric cat pelvii (n = 10). Methods Feline ilial fractures (n = 20) stabilized with either P or P + P were subjected to 100 nondestructive load cycles, then loaded to failure. Deformation after cycling, yield load and displacement, stiffness and load at 2 mm of displacement were compared between groups. Results There were no significant differences between groups for any of the parameters. Variability of data was much larger for the P + P group. Conclusions No biomechanical advantage was demonstrated. The P + P constructs were not significantly stronger than plates alone in this acutely loaded cadaveric model.

© 2017 The American College of Veterinary Surgeons Objective: To assess the influence of a 50% distal ulnectomy on mediolateral carpal stability in the dog. Study design: Canine cadaveric study. Sample population: Seven canine thoracic limbs. Methods: Thoracic limbs were placed in a jig to mimic weight bearing with a load representing 30% of body weight. Carpal extension angle was standardized at 190° ± 5°. Frontal plane carpal angles were measured with the limb loaded on craniocaudal radiographs before and after ulnectomy. Valgus and varus stress radiographs with the limb loaded were acquired before and after ulnectomy. The limbs were palpated and were subjectively graded for valgus or varus instability by 2 investigators before and after ulnectomy. Results: Mean (±SD) valgus angulation increased after ulnectomy (2.1° ± 1.7°; P =.017; CI95= 0.5°-3.7°) when the limb was loaded without valgus or varus stress applied. Mean valgus angulation increased after ulnectomy (2.7° ± 2.8°; P =.032; CI95= −0.2°-5.5°) when valgus stress was applied to the loaded limb. Varus angulation was unchanged after ulnectomy (0.6° ± 4.6°; P =.383; CI95= −4.2°-5.3°) when varus stress was applied to the loaded limb. Palpation detected increased valgus score after ulnectomy. Conclusion: Distal ulnectomy with excision of the lateral styloid process induces a slight increase in valgus in canine cadaver carpi. The clinical consequences of that valgus on carpal function and health should be assessed in clinical patients.

Validation of a Swedish version of the Helsinki Chronic Pain Index for the measure of chronic pain behaviors in canine osteoarthritis

SummaryObjective: To evaluate the accuracy and repeatability of measurements collected using a weight distribution platform and a pressure sensitive walkway using an inanimate object with known weight distribution.Methods: A custom-built jig with a range of weights was applied in a random order. Measurements were collected on both devices and compared to each other and to the known weight distribution.Results: Weight distribution platform and pressure sensitive walkway measurements were highly correlated to each other (Pearson’s correlation coefficient R = 0.98) and to actual weights (R = 0.99 for the weight distribution platform; 0.98 for the pressure sensitive walkway). Repeatability from day to day for both devices was greater than 0.99. For the weight distribution platform, the 95% confidence interval was ± 2.5% from the true percentage and ± 3.3% for the pressure sensitive walkway. The coefficient of variation (COV) was highest for both devices at the lightest weights (weight distribution platform 11.28%, pressure sensitive walkway 16.91%) and lowest with the heaviest weights (weight distribution platform 3.71%, pressure sensitive walkway 5.86%).Conclusion: Both the weight distribution platform and the pressure sensitive walkway provided accurate and consistent measures of weight distribution with no significant difference between devices. The rounded standard error was three percent for the weight distribution platform, and four percent for the pressure sensitive walkway. The higher variability when measuring the smallest weight suggests less accuracy at lower weights with both devices.Clinical significance: The weight distribution platform is a repeatable and accessible device to measure static weight distribution, and if proven the same in a clinical setting, it will be a valuable addition to current objective measures of limb use.

Objective To determine whether there is a difference between the ability of peak vertical force (PVF), vertical impulse (VI), and percentage body weight distribution (%BWdist) in differentiating which leg is most affected by hip joint pain before total hip replacement (THR) surgery, and for measuring changes in limb use after THR surgery. Study Design Prospective clinical study. Animals Dogs (n = 47). Methods Ground reaction force (GRF) data were collected using a pressure-sensitive walkway the day before THR surgery and at ∼3, 6, and 12 months postoperatively. PVF and VI expressed as a percentage of body weight (%PVF, %VI), and %BWdist were recorded. Regression models performed separately for each outcome were used for statistical analysis. Results When comparing limb use between the affected limb (AP) and the nonaffected limb (NP) preoperatively, differences between limbs were statistically significant when evaluated using PVF (P = .023), VI (P = .010), and %BWdist (P = .012). When evaluating the magnitude of absolute and percentage change difference in AP limb use preoperatively versus postoperatively, differences were statistically significant when evaluated using PVF (P < .001 and P = .001, respectively), VI (P = .001 and P < .001) and %BWdist (P < .001 and P < .001). Conclusion There appeared to be no difference in the sensitivity of VI, PVF, and %BWdist for evaluating limb use before and after THR.

Objective—To assess the effect of computed tomography (CT) scan protocols (radiation amounts) and fabrication methods on biomodel accuracy and variability. Sample—Cadaveric femur of a Basset Hound. Procedures—Retroreconstructions (n = 158) were performed of 16 original scans and were visually inspected to select 17 scans to be used for biomodel fabrication. Biomodels of the 17 scans were made in triplicate by use of 3 freeform fabrication processes (stereolithography, fused deposition modeling, and 3-D printing) for 153 models. The biomodels and original bone were measured by use of a coordinate measurement machine. Results—Differences among fabrication methods accounted for 2% to 29% of the total observed variation in inaccuracy and differences among method-specific radiation configurations accounted for 4% to 44%. Biomodels underestimated bone length and width and femoral head diameter and overestimated cortical thickness. There was no evidence of a linear association between thresholding adjustments and biomodel accuracy. Higher measured radiation dose led to a decrease in absolute relative error for biomodel diameter and for 4 of 8 cortical thickness measurements. Conclusions and Clinical Relevance—The outside dimensions of biomodels have a clinically acceptable accuracy. The cortical thickness of biomodels may overestimate cortical thickness. Variability among biomodels was caused by model fabrication reproducibility and, to a lesser extent, by the radiation settings of the CT scan and differences among fabrication methods.

Objective To compare: (1) the force required to initiate subsidence, and (2) the relative subsidence, of femoral stems implanted into intact femora, and then into the same femora in which an induced fissure had been stabilized by cerclage. Study Design In vitro, mechanical study. Sample Population Femora (n=9) from 9 dogs. Methods Femora were prepared for implantation of an uncemented stem. Stems were implanted with continuous and impact loading. After axial loading until a fissure occurred, the stems were extracted, and the fissure stabilized with double-loop cerclage. Stems were reimplanted, and reloaded to failure. Results Mean±SD load to initiate subsidence in intact femora was 1706±584 N compared with 2379±657 N for cerclaged bones (P=.002). Mean relative subsidence of intact femora was 3.99±2.09 mm compared with 1.79±2.99 mm for cerclaged bones (P=.091). Conclusions The load to initiate subsidence is increased in femora that have fissured, then have been stabilized with double-loop cerclage, when compared with intact femora. The relative subsidence is not different between intact and stabilized specimens.

Objective: To determine (1) risk factors for fibular fracture after tibial plateau leveling osteotomy (TPLO) and (2) if a single postoperative radiographic measurement or measurement ratio of the proximal tibial fragment can be used as a predictor for fibular fracture. Study Design: Multivariate retrospective clinical study. Animals: Dogs (n=326) with cranial cruciate ligament rupture that had TPLO (n=355). Methods: Medical records (January 2004–November 2007) and radiographs of dogs that had TPLO were reviewed. TPLO plate type, distance between tibial plateau and proximal screw, proximodistal tibial plateau fragment length, tibial plateau width, the presence of a fibular drill hole filled with a screw or not, and fibular fractures were recorded. Results: The odds of having a fibular fracture were 10 times greater in dogs with a fibular drill hole than in dogs without a drill hole. The odds of having a fibular fracture were 1.46 times greater for every 4.5 kg increase in body weight. Tibial plateau angle (TPA) at the time of reevaluation was larger than the postoperative TPA and TPA increase was larger in dogs with fibular drill holes than without (P

Overheating is a common form of injury in working dogs. The purpose of this study was to evaluate the relative efficacy of three postexercise cooling methods in dogs with exercise-induced heat stress.Nine athletically conditioned dogs were exercised at 10kph for 15 minutes on a treadmill in a hot environmental chamber (30°C) three times on separate days. After exercise, the dogs were cooled using one of three methods: natural cooling, cooling on a 4°C cooling mat, and partial immersion in a 30°C water bath for 5 minutes.Time-weighted heat stress was lower for immersion cooling compared with the cooling mat and the control. The mean time required to lower gastrointestinal temperature to 39°C was 16 minutes for immersion cooling, 36 minutes for the cooling mat, and 48 minutes for control cooling.Water immersion decreased postexercise, time-weighted heat stress in dogs and provided the most rapid cooling of the three methods evaluated, even with the water being as warm as the ambient conditions. The cooling mat was superior to cooling using only fans, but not as effective as immersion. The placement of simple water troughs in working- dog training areas, along with specific protocols for their use, is recommended to reduce the occurrence of heat injury in dogs and improve the treatment of overheated dogs.

The motion of wing joints is a critical factor for successful flight in avian patients, but little information is available about goniometry in birds. Elbow and carpus joints in flexed and extended positions from 10 orthopedically normal wings of 6 adult wild barred owls (Strix varia) were evaluated with the animals under general anesthesia using a modified universal plastic goniometer and an electrogoniometer. These measurements were compared to those obtained using radiographic assessment. Intra- and interobserver reliability was calculated. Measurements in live animals were compared to those obtained from frozen-thawed carcasses. Results showed that the modified universal plastic goniometer can be used to obtain accurate results for elbow flexion and extension and for carpal flexion with good to excellent reliability compared to measurements collected from radiographic assessment. Measurements obtained using an electrogoniometer were less accurate and less reliable than those obtained with a plastic goniometer, possibly because of the size and configuration of the model used. Comparison of measurements from live animals and carcasses revealed no significant differences between mean measurements and suggested that further evaluation of carcasses as a model for study of goniometry measurements in avian wing joints should be considered.

Objective—To design and manufacture free-form biodegradable polycaprolactone (PCL) bone plates and to compare mechanical properties of femoral constructs with a distal physeal fracture repaired by use of 5 stabilization methods. Sample Population—40 canine femoral replicas created by use of additive manufacturing and rapid tooling. Procedures—Surgery duration, mediolateral and craniocaudal bending stiffness, and torsional stiffness of femoral physeal fracture repair constructs made by use of 5 stabilization methods were assessed. The implants included 2 Kirschner wires inserted medially and 2 inserted laterally (4KW), a commercial stainless steel plate (CSP), a custom free-form titanium plate (CTP), thin (2-mm-thick) biodegradable PCL plates (TNP) placed medially and laterally, and thick (4-mm-thick) PCL plates (TKP) placed medially and laterally. Results—Surgical placement of 4KW was more rapid than placement of other implants The mean caudal cantilever bending stiffness of CTP and CSP constructs was greater than that for TNP TKP and 4KW constructs, and the mean caudal cantilever bending stiffness of TNP and TKP constructs was greater than that for 4KW constructs. The mean lateral cantilever bending stiffness of TKP constructs was greater than that for 4KW constructs. Differences among construct types were not significant in yield strength, ultimate strength, yield torque, and ultimate torque. Conclusions and Clinical Relevance—The mechanical properties of fracture repair constructs made from free-form PCL biodegradable plates compared favorably with those of constructs made from Kirschner wires. The impact of PCL plates on musculoskeletal soft tissues, bone healing, and bone growth should be evaluated before clinical use.

Objective To evaluate the effect of cranial tibial wedge osteotomy (CTWO) angle on cranial tibial subluxation (CTS) and postoperative tibial plateau angle (TPA). Study design Ex vivo biomechanical study. Sample population Canine pelvic limbs (n=6). Methods TPA determined from a lateral radiographic projection. CTS under 30% body weight load was measured from radiographs in the intact limb and after transection of the cranial cruciate ligament. A CTWO equal to TPA+10 degrees was performed at the distal extent of the tibial crest, and was stabilized with a custom designed hinge plate and external skeletal fixator. TPA and CTS in the loaded limb was determined from radiographs at 4 CTWO angles: TPA-5 degrees, TPA, TPA+5 degrees, and TPA+7.5 degrees. Comparison of CTS between the intact limb and the 4 CTWO angle groups was performed using 1-way repeated-measures ANOVA and a Dunnett multiple comparison test (significance at P Results CTS was significantly greater than that of the intact limb in the TPA-5 degrees and TPA groups. CTS was not significantly different from the intact limb in the TPA+5 degrees or TPA+7.5 degrees groups with corresponding TPAs of 5.9 degrees and 3.8 degrees, respectively. Conclusion Using this model, CTS was neutralized at a TPA of approximately 4-6 degrees with a CTWO angle between TPA+5 degrees and TPA+7.5 degrees. Clinical relevance A CTWO angle between TPA+5 degrees and TPA+7.5 degrees is necessary to neutralize CTS and achieve a postoperative TPA of 4-6 degrees if the CTWO is performed at the distal extent of the tibial crest and the caudal cortices are aligned.

Background: Feline degenerative joint disease (DJD) is common and there are no approved therapies for the alleviation of the associated pain. Objective: To test a diet high in eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) content and supplemented with green-lipped mussel extract and glucosamine/chondroitin sulfate (test-diet) for its pain-relieving and activity-enhancing effects in cats with painful, mobility-impairing DJD over a 9-week period. Animals: Forty client-owned cats. Methods: Randomized, controlled, blinded, parallel group, prospective clinical study. Cats with no detectable systemic disease, and with at least 1 appendicular joint with radiographic evidence of DJD where manipulation elicited an aversive response were included. Cats were randomly allocated to the test-diet or control diet (C-diet). Outcome measures were subjective owner and veterinarian assessments, and objective activity monitoring (accelerometry). Nonparametric statistics were used to evaluate changes within and between groups for both subjective and objective data, and locally weighted scatterplot smoothing regression analysis was used to predict activity changes. Results: The primary objective outcome measures indicated that activity declined significantly (P < .001) in the C-diet group, significantly increased (P < .001) in the test-diet group and there was a significant difference between the groups (P < .001). Conclusion and Clinical Importance: A diet high in EPA and DHA and supplemented with green-lipped mussel extract and glucosamine/chondroitin sulfate improved objective measures of mobility. Dietary modulation might be 1 method to use to improve mobility in cats with DJD-associated pain.

Objective— To evaluate stance phase limb use after cementless (BFX®) total hip replacement (THR) in dogs and to relate postoperative radiographic variables to static bodyweight distribution after surgery. Study Design— Prospective clinical study. Animals— Dogs (n=35) that had THR. Methods— THR was performed using the BFX® THR technique. Postoperative pain management regimens were similar for all dogs. Standing bodyweight distribution (%BWdistrib) was measured using a pressure sensitive walkway and radiographs made before surgery and at 3, 6, and 12 months after surgery. Repeated measures models (with backwards-stepping to obtain the final model) were used for statistical analysis. Results— Temporally, %BWdistrib to the operated limb increased (P

Objective—To determine the electrical impulse duration thresholds (chronaxy) for maximal motor contraction of various muscles without stimulation of pain fibers in dogs. Animals—10 healthy adult Beagles. Procedures—The dogs were used to assess the minimal intensity (rheobase) required to elicit motor contraction of 11 muscles (5 in the forelimb [supraspinatus, infraspinatus, deltoideus, lateral head of the triceps brachii, and extensor carpi radialis], 5 in the hind limb [gluteus medius, biceps femoris, semitendinosus, vastus lateralis, and tibialis cranialis], and the erector spinae). The rheobase was used to determine the chronaxy for each of the 11 muscles in the 10 dogs; chronaxy values were compared with those reported for the corresponding muscles in humans. Results—Compared with values in humans, chronaxy values for stimulation of AA motor fibers in the biceps femoris and semitendinosus muscles and muscles of the more distal portions of limbs were lower in dogs. For the other muscles evaluated, chronaxy values did not differ between dogs and humans. Conclusions and Clinical Relevance—Application of the dog-specific chronaxy values when performing electrical stimulation for strengthening muscles or providing pain relief is likely to minimize the pain perceived during treatment in dogs.

The design of custom or tailored implant components has been the subject of research and development for decades. However, the economic feasibility of fabricating such components has proven to be a challenge. New direct metal fabrication technologies such as Electron Beam Melting (EBM) have opened up new possibilities. This paper discusses the design and fabrication of titanium implant components having tailored mechanical properties that mimic the stiffness of bone to reduce stress shielding and bone remodeling. Finite Element Analysis was used to design the tailored structures, and results were verified using mechanical testing.

The shoulder joint is the most mobile of all main limb joints. While its primary motion is in a sagittal plane, the shoulder has a significant amount of abduction and adduction, and internal and external rotation. Its stability is ensured by the joint capsule, by its specialized bands (medial and lateral glenohumeral ligaments), and by large tendons located inside (eg, tendon of origin of the biceps brachii muscle) or immediately outside the joint (eg, supraspinatus, infraspinatus, teres minor, and subscapularis). Sprains or strains of all supporting structures of the canine shoulder have now been reported and the shoulder pathology resembles the pathology of the human shoulder that includes strains and tears of the rotator cuff muscles, adhesive capsulitis, and calcific tendonitis.

Objective— To report surgical planning, technique, and outcome of custom total knee replacement (TKR) performed to manage a medial femoral condylar nonunion in a dog. Study Design— Clinical case report. Animal— A 3-year-old, 20 kg Karelian Bear Hound. Methods— Computed tomographic scan of the left pelvic limb was used to build a stereolithography model of the distal portion of the femur. The model was used to create a custom augment to replace the missing medial femoral condyle and a custom stem for intramedullary condylar cemented fixation. The augment and stem were adapted to femoral and tibial components already available. The model was used to rehearse the surgery and then the custom prosthesis was implanted. Results— Weight bearing returned 8 hours after surgery and improved thereafter. Joint alignment was normal and prosthetic joint motion was 60–165° postoperatively. The dog resumed moose hunting 3 months after surgery. Peak vertical force and impulse of the operated limb measured 17 months after surgery were 65% and 47% of the normal, contralateral limb. Conclusion— Based on short-term follow-up, cemented canine TKR was successfully achieved for management of a severely abnormal stifle joint. Clinical Relevance— With further refinement and development of commercially available prostheses, TKR should be possible for canine patients.

SummaryPurpose: To assess validity and inter- and intra-tester reliability of equine goniometry and to establish values for carpal, meta -carpophalangeal, tarsal, and metatarsophalangeal flexion and extension in horses.Subjects: Seventeen healthy equine subjects of varied breeds were used.Methods: Three investigators blindly and independently measured in triplicate the extension and flexion of carpal, metacarpo -phalangeal, tarsal, and metatarsophalangeal joints of 17 horses after sedation. Radiographs of these joints in flexion and extension were acquired while under sedation. Goniometric and radiographic measurements were compared statistically and were correlated. A Bland-Altman plot was constructed. Inter- and intra-tester repeatability of goniometry were evaluated by calculating intra-class correlation coefficients (ICC). Mean flexion and extension of carpal, metacarpo -phalangeal, tarsal, and metatarsophalangeal joints were calculated.Results: Goniometric and radiographic measurements did not differ statistically and were significantly correlated (correlation coefficients ranged from 0.59 - 0.89). The mean difference between goniometric and radiographic measurements was 0.4°. Triplicate measurements collected by the three raters did not differ significantly within raters (ICC ranging from 0.950 - 0.995) and between raters (ICC ranging from 0.942 - 0.989).Conclusion: Goniometry is a valid and repeatable tool for evaluation of the range of motion of carpal, metacarpophalangeal, tarsal, and metatarsophalangeal joints in standing, sedated healthy horses.

To evaluate the effects of tibial tuberosity advancement (TTA) on canine biomechanics in the cranial cruciate ligament (CrCL)-deficient stifle using a 3-dimensional quasi-static rigid body pelvic limb computer model simulating the stance phase of gait.Computer simulations.A 5-year-old neutered male Golden Retriever weighing 33 kg.A TTA was implemented in a previously developed canine pelvic limb computer model using the tibial plateau slope and common tangent planning techniques. Ligament loads, relative tibial translation, and relative tibial rotation were determined and compared to CrCL-intact and CrCL-deficient stifles.The TTA significantly decreased peak caudal cruciate ligament load, significantly increased peak lateral collateral ligament load, and significantly changed peak medial collateral ligament load occurrence, while there was no significant difference in peak patellar ligament load compared to the CrCL-intact stifle. Compared to the CrCL-deficient stifle, peak caudal cruciate, lateral collateral and medial collateral ligament loads significantly decreased, while peak patellar ligament load was similar, peak relative tibial translation significantly decreased and peak relative tibial rotation was converted to external rotation in the TTA-treated stifle. Each TTA planning technique generated similar caudal cruciate, medial collateral, and patellar ligament loading as well as relative tibial translation, but lateral collateral ligament loading and occurrence of relative tibial rotation differed significantly across the techniques.Model-predicted stifle ligament loads improved following TTA compared to the CrCL-deficient stifle, but TTA did not restore CrCL-intact stifle biomechanics. The TTA effectively reduced tibial translation, but tibial rotation was not stabilized.

SummaryObjective: Evaluate variability associated with assessing changes in the position of uncemented femoral stems.Methods: Stem level, canal fill, stem angle, and version angle were measured on craniocaudal horizontal beam (CCHB) and open leg lateral (OLL) radiographic projections of the femur of 20 dogs that had uncemented total hip replacement. Intraobserver and inter -observer repeatability were determined on immediate postoperative (PO) images. Differences in position were calculated between the first (3 months – R1) and second (6 months – R2) re-evaluation (R1-R2) time points, and between PO and R1.Results: The measurement process was very repeatable. For R1-R2, the stem appeared to subside 0.8 ± 1.4 mm for measurements based on the greater trochanter on the CCHB images, but there was a wide range (-3.9 to 2 mm; positive values indicate proximad movement). Measurements based on the inter-trochanteric crest on the OLL images had the same mean, and also a wide range (-4.4 to 2.1 mm; negative values indicate proximad movement). For PO-R1, the stem appeared to subside 1.8 ± 2.0 mm (CCHB, based on the greater trochanter, range -7.7 to 2.2 mm), 1.6 ± 1.5 mm (CCHB, based on the intertrochanteric crest, range -0.7 to 4.3 mm); and 2.1 ± 2.1 mm (OLL, based on the intertrochanteric crest, range -1.6 to 6.8 mm).Conclusion: The position of a stable stem can appear different on subsequent re-evaluations, but this may be due to variability associated with inconsistency of positioning of the patient and limb.Clinical significance: Documenting subsidence in individual patients should not rely on calculations based on a single measurement.

Summary Objectives: To evaluate the patellar ligament to tibial plateau angle (PL-TPA) and amount of achieved advancement in dogs that underwent the modified Maquet procedure; compare wedge sizes recommended using two different planning techniques (Orthomed and modified tibial tuberosity advancement); and evaluate anatomical factors that predict the wedge size required to obtain a 90° PL-TPA. Methods: Pre- and postoperative radio-graphs of dogs that had a modified Maquet procedure performed were evaluated for the following: calculated wedge size using two different planning techniques, the actual wedge size used, the achieved tibial tuberosity advancement, and the changes in PL-TPA. Anatomical measurements of the tibia were evaluated and correlated with the actual wedge size. Results: Of the 38 modified Maquet procedures identified, 53% (n = 20) had a PLTPA of 90° ± 5°. Actual achieved advancement of the tibial tuberosity was 30% less than the wedge size used. Changes in PL-TPA and tibial width persisted at eight weeks postoperatively without loss of advancement. The two planning techniques did not result in a significantly different selection of wedge size. Clinical relevance: Current planning techniques for the modified Maquet procedure result in under-advancement of the tibial tuberosity. Both measurement techniques evaluated do not result in appropriate advancement.

Objective—To compare application time, accuracy of tibial plateau slope (TPS) correction, presence and magnitude of rotational and angular deformities, and mechanical properties of 5 canine tibial plateau leveling methods. Sample Population—27 canine tibial replicas created by rapid prototyping methods. Procedure—The application time, accuracy of TPS correction, presence and magnitude of rotational and angular deformation, and construct axial stiffness of 3 internal fixation methods (tibial plateau leveling osteotomy, tibial wedge osteotomy, and chevron wedge osteotomy [CWO]) and 2 external skeletal fixation (ESF) methods (hinged hybrid circular external fixation and wedge osteotomy linear fixation [WOLF]) were assessed. Results—Mean bone model axial stiffness did not differ among methods. Mean application time was more rapid for WOLF than for other methods. Mean TPSs did not differ from our 5° target and were lower for ESF methods, compared with internal fixation methods. Mean postoperative rotational malalignment did not differ from our target or among groups. Mean postoperative medio-lateral angulation did not differ from our target, except for CWO. Internal fixation methods lead to axially stiffer constructs than ESF methods. Reuse of ESF frames did not lead to a decrease in axial stiffness. Conclusions and Clinical Relevance—The 5 tibial plateau leveling methods had acceptable geometric and mechanical properties. External skeletal fixation methods were more accurate as a result of precise data available for determining the exact magnitude of correction required to achieve a 5° TPS.

Objective— To report femoral nerve dysfunction caused by focal iliopsoas muscle injury and treated by performing tenectomy of the muscle insertion. Study Design— Case report. Animals— A 4-year-old, castrated male, English Mastiff. Results— Iliopsoas muscle injury caused femoral nerve deficits and severe pain. Focal injury was not detected by ultrasonography or computed tomography but was visible on magnetic resonance (MRI) images. Tenectomy of the insertion of the iliopsoas muscle relieved signs of pain. Conclusions— Femoral nerve dysfunction may occur with iliopsoas muscle injury. Clinical Relevance— Iliopsoas muscle injury should be considered in patients with hip pain and MRI is a useful test for diagnosis. Tenectomy may be indicated for relief of chronic iliopsoas muscle pain.

Objective—To compare ground reaction forces (GRFs) measured by use of a pressure-sensitive walk-way (PSW) and a force plate (FP) and evaluate weekly variation in the GRFs and static vertical forces in dogs. Animals—34 clinically normal dogs and 5 research dogs with lameness. Procedure—GRF data were collected from 5 lame and 14 clinically normal dogs by use of an FP and a PSW. Peak vertical force (PVF), vertical impulse (VI), and velocity measurements (determined by use of photocells and PSW data) were compared between groups. Peak vertical force, VI, stride length, ground phase time (ie, contact time), and static body weight distribution data were collected on 2 occasions, 1 week apart, in 20 different clinically normal dogs by use of a PSW; week-to-week variation in values was evaluated. Results—Measurements of velocity derived by use of the photocells were not different from those derived by use of the PSW. For any 1 limb, values derived by use of the PSW were significantly lower than values derived with the FP. For values obtained by use of either technique, there were no differences between left and right limbs except for values of PVF measured via PSW in forelimbs. Values of PVF, VI, contact time, stride length, and static weight distribution generated by the PSW did not vary from week to week. Conclusions and Clinical Relevance—Values for GRFs varied between the FP and PSW. However, data derived by use of PSW were consistent and could be used to evaluate kinetic variables over time in the same dog.

Deciding on which supportive device, orthotic, or prosthetic is best suited for a given patient is a complex process involving many different factors. The ability to manage biomechanical abnormalities successfully may be enhanced by an understanding of the properties of the various materials that comprise these devices, their effect on functional performance, and other associated patient factors. Veterinary health care providers are faced with the challenge of effectively addressing the physiologic and fiscal needs of the patient in a rapidly changing patient care environment.

Setting up rehabilitation services presents several challenges to the veterinary practitioner. Members of the rehabilitation team need to have a solid knowledge base of acute and chronic orthopedic and neurologic disorders and a knowledge of rehabilitation principles and applications. The working environment has to be adapted to patients with limited mobility, specific equipment and supplies are to be used, and a fee structure should be implemented. This article reviews these logistic aspects of companion animal rehabilitation.