Search

Surmounting complicated defects at the electron transport layer (ETL) and perovskite interface plays a non‐trivial role in improving efficiency and stability of perovskite solar cells (PSCs). Herein, an asymmetric interface modification strategy (AIMS) is developed to passivate the defects from both a SnO2 ETL and the perovskite buried surface via incorporating 1,3‐thiazole‐2,4‐diammonium (TDA) into the SnO2/perovskite interface. Detailed experimental and calculated results demonstrate that N3 (the nitrogen atom bonding to the imine) in the TDA preferentially cures the free hydroxyl (OH), oxygen vacancy (VO), and the Sn‐related defects on the SnO2 surface, while N1 (the nitrogen atom bonding to the vinyl) is more inclined to passivate the Pb2+ and I− related defects at the perovskite buried surface. As a result, the TDA‐modified FACsPbI3 PSC yields a champion power conversion efficiency (PCE) of 24.96% with a gratifying open‐circuit voltage (Voc) of 1.20 V. In addition, the optimized PSCs exhibit charming air‐operational stability with the unencapsulated device sustaining 97.04% of its initial PCE after storage in air conditions for 1400 h. The encapsulated device maintains 90.21% of its initial PCE after maximum power point tracking for 500 h. [ABSTRACT FROM AUTHOR]

High density of defects at interface severely affects the performance of perovskite solar cells (PSCs). Herein, cobalt (II) hexafluoro‐2,4‐pentanedionat (CoFAc), a hinge‐type fluorine‐rich complex, is introduced onto the surface of formamidinium cesium lead iodide (FACsPbI3) film to address the issues of perovskite/Spiro‐OMeTAD interface. The existence of CoFAc passivates both organic cation and halide anion vacancies by establishing powerful hydrogen bonds with HC(NH2)2+ (FA+) and strong ionic bonds with Pb2+ in perovskite films. In addition, CoFAc serves as a connecting link to enhance interfacial hole‐transport kinetics via interacting with Spiro‐OMeTAD. Consequently, FACsPbI3 PSCs with CoFAc modification display a champion power conversion efficiency (PCE) of 24.64% with a charming open‐circuit voltage (VOC) of 1.191 V, which is the record VOC among all the reported organic‐inorganic hybrid PSCs with TiO2 as electron transport layer. Furthermore, CoFAc‐modified devices exhibit an outstanding long‐term stability, which can maintain 95% of their initial PCEs after exposure to ambient atmosphere for 1500 h without any encapsulation. [ABSTRACT FROM AUTHOR]

All‐inorganic CsPbI3 perovskite presents preeminent chemical stability and a desirable band gap as the front absorber for perovskite/silicon tandem solar cells. Unfortunately, CsPbI3 perovskite solar cells (PSCs) still show low efficiency due to high density of defects in solution‐prepared CsPbI3 films. Herein, three kinds of hydrazide derivatives (benzoyl hydrazine (BH), formohydrazide (FH) and benzamide (BA)) are designed to reduce the defect density and stabilize the phase of CsPbI3. Calculation and characterization results corroborate that the carboxyl and hydrazine groups in BH form strong chemical bonds with Pb2+ ions, resulting in synergetic double coordination. In addition, the hydrazine group in the BH also forms a hydrogen bond with iodine to assist the coordination. Consequently, a high efficiency of 20.47 % is achieved, which is the highest PCE among all pure CsPbI3‐based PSCs reported to date. In addition, an unencapsulated device showed excellent stability in ambient air. [ABSTRACT FROM AUTHOR]

Formamidinium methylammonium lead iodide (FAMAPbI3) perovskite has been intensively investigated as a potential photovoltaic material because it has higher phase stability than its pure FAPbI3 perovskite counterpart. However, its power conversion efficiency (PCE) is significantly inferior due to its high density of surface detects and mismatched energy level with electrodes. Herein, a bifunctional passivator, methyl haloacetate (methyl chloroacetate, (MClA), methyl bromoacetate (MBrA)), is designed to reduce defect density, to tune the energy levels and to improve interfacial charge extraction in the FAMAPbI3 perovskite cell by synergistic passivation of both CO groups and halogen anions. As predicted by modeling undercoordinated Pb2+, the MBrA shows a very strong interaction with Pb2+ by forming a dimer complex ([C6H10Br2O4Pb]2+), which effectively reduces the defect density of the perovskite and suppresses non‐radiative recombination. Meanwhile, the Br− in MBrA passivates iodine‐deficient defects. Consequently, the MBrA‐modified device presents an excellent PCE of 24.29%, an open‐circuit voltage (Voc) of 1.18 V (Voc loss ≈ 0.38 V), which is one of the highest PCEs among all FAMAPbI3‐based perovskite solar cells reported to date. Furthermore, the MBrA‐modified devices without any encapsulation exhibit remarkable long‐term stability with only 9% of PCE loss after exposure to ambient air for 1440 h. [ABSTRACT FROM AUTHOR]

Inorganic CsPbI2Br perovskite is promising for solar cell applications due to its excellent thermal stability and optoelectronic characteristics. Unfortunately, the current high‐efficiency CsPbI2Br perovskite solar cells (PSCs) are mostly fabricated in an inert atmosphere due to their instability to moisture. Herein, a low‐dimensional intermediate‐assisted growth (LDIAG) method is reported for the deposition of CsPbI2Br film in ambient atmosphere by introducing imidazole halide (IMX: IMI and IMBr) into the precursor solution to control both nucleation and growth kinetics. The IMX first combines with PbI2 in the precursor film to form a 2D intermediate which then gradually releases PbI2 to slowly form high‐quality CsPbI2Br film during annealing. It is found that the LDIAG method produces a uniform, highly crystalline, pinhole‐free, and stable CsPbI2Br film with low defect density. Consequently, the solar cell efficiency is increased to as high as 17.26%, one of the highest for this type of device. Furthermore, the bare device without any encapsulation shows excellent long‐term stability with ≈86% of its initial efficiency retained after being exposed to the ambient environment for 1000 h. This work provides a perspective to tune the intermediate phases and crystallization pathway for high‐performance inorganic PSCs formed under ambient conditions. [ABSTRACT FROM AUTHOR]

Summary: We propose a novel AR CAPTCHA that first uses Augmented Reality to design CAPTCHA. Users should use their cameras on mobile devices to capture a marker in the 3D physical world or PC screens to find the appropriate angle to recognize each 3D character rendered on the marker in a 3D registration manner, which is very hard for machines or robots to do the same thing. Besides, we add many random 2D characters on the marker to make the state‐of‐the‐art scene text recognition methods fail to recognize the target 3D characters. To ensure availability, we design dual‐channel scenario setting (mobile phone and physical world) that enhances the security level of CAPTCHA and single‐channel scenario setting (mobile phone only) that the gyroscope could be used for our CAPTCHA. The experimental results reveal that the recognition accuracy of machines is nearly 0%, while a human could recognize AR CAPTCHA in only a few seconds. [ABSTRACT FROM AUTHOR]

The ternary copolymerization strategy has emerged as a promising strategy for developing high‐efficiency donor polymers in polymer solar cells (PSCs). Terpolymers based on the star polymer PM6 have already realized good photovoltaic performance. However, challenges such as the intricate synthesis of fluorine‐substituted benzodithiophene (F‐BDT) unit of PM6 and entropy increase induced by backbone disorder have hindered the construction of high‐performance donor terpolymers. In this work, these challenges are addressed by opting for the cost‐effective chlorinated‐substituted benzodithiophene unit (Cl‐BDT) as an alternative to F‐BDT and incorporating the large dipole moment and electron‐deficient TPD group as the third component into the high‐performance donor polymer of PM7. As expected, this approach effectively suppresses terpolymer backbone disorder while enhancing crystallinity, thereby optimizing morphology and improving charge generation and transport. Remarkably, the PM7‐TPD‐10‐based device with 10% TPD replacement achieves a champion power conversion efficiency (PCE) of 18.26%. After introducing PM7‐TPD‐10 as the third component into D18:L8‐BO blend, a dual mechanism for improving the efficiency to 19.40% is realized. This work demonstrates that the high dipole moiety as the third component to construct terpolymers is an important strategy to suppress the backbone disorder and increase the crystallinity, facilitating the optimization of morphology and device performance. [ABSTRACT FROM AUTHOR]

BACKGROUND White tea has received increasing attention of late as a result of its sweet taste and health benefits. During the brewing of white tea, many factors may affect the nutritional and sensory quality of the resulting infusions. The present study aimed to investigate the effect of various infusion conditions on the taste components of Fuding white tea, including infusion time, ratio of tea and water, number of brewing steps, and temperature. RESULTS Brewing conditions had a strong effect on the taste compound profile and sensory characteristics. The catechin, caffeine, theanine and free amino acid contents generally increased with increasing infusion time and temperature. Conditions comprising an infusion time of 7 min, a brewing temperature of 100 °C, a tea and water ratio of 1:30 or 1:40, and a second brewing step, respectively, were shown to obtain the highest contents of most compounds. Regarding tea sensory evaluation, conditions comprising an infusion time of 3 min, a brewing temperature of 100 °C, a tea and water ratio of 1:50, and a first brewing step, resulted in the highest sensory score for comprehensive behavior of color, aroma and taste. CONCLUSION The results of the present study reveal differences in the contents of various taste compounds, including catechins, caffeine, theanine and free amino acids, with respect to different brewing conditions, and sensory scores also varied with brewing conditions. © 2016 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Although curcumin (CUR) can inhibit proliferation and induce apoptosis of tumors, the poor water solubility restricted its clinical application. The aim of this study was to improve the aqueous solubility of CUR and make more favorable changes to bioactivity by preparing curcumin-loaded phospholipid-sodium deoxycholate-mixed micelles (CUR-PC-SDC-MMs). CUR-PC-SDC-MMs were prepared by the thin-film dispersion method. Based on the results of single factor exploration, the preparation technology was optimized using the central composite design-response surface methodology with drug loading and entrapment efficiency (EE%) as indicators. The images of transmission electron microscopy showed that the optimized CUR-PC-SDC-MMs were spherical and well dispersed. The average size of the mixed micelles was 66.5 nm, the zeta potential was about −26.96 mV and critical micelle concentration was 0.0087 g/l. CUR was encapsulated in PC-SDC-MMs with loading capacity of 13.12%, EE% of 87.58%, and the solubility of CUR in water was 3.14 mg/ml. The release results in vitro showed that the mixed micelles presented sustained release behavior compared to the propylene glycol solution of CUR. The IC50 values of CUR-loaded micelles and free drug in human breast carcinoma cell lines were 4.10 μg/ml and 6.93 µg/ml, respectively. It could be concluded from the above results that the CUR-PC-SDC-MMs system might serve as a promising nanocarrier to improve the solubility and bioactivity of CUR. [ABSTRACT FROM AUTHOR]

Various isomers have been developed to regulate the morphology and reduce defects in state-of-the-art perovskite solar cells. To insight the structure-function-effect correlations for the isomerization of thiourea derivatives on the performance of the perovskite solar cells (PSCs), we developed two thiourea derivatives [(3,5-dichlorophenyl)amino]thiourea (AT) and N-(3,5-dichlorophenyl)hydrazinecarbothioamide (HB). Supported by experimental and calculated results, it was found that AT can bind with undercoordinated Pb2+ defect through synergistic interaction between N1 and C=S group with a defect formation energy of 1.818 eV, which is much higher than that from the synergistic interaction between two -NH- groups in HB and perovskite (1.015 eV). Moreover, the stronger interaction between AT and Pb2+ regulates the crystallization process of perovskite film to obtain a high-quality perovskite film with high crystallinity, large grain size, and low defect density. Consequently, the AT-treated FACsPbI3 device engenders an efficiency of 25.71% (certified as 24.66%), which is greatly higher than control (23.74%) and HB-treated FACsPbI3 devices (25.05%). The resultant device exhibits a remarkable stability for maintaining 91.0% and 95.2% of its initial efficiency after aging 2000 h in air condition or tracking at maximum power point for 1000 h, respectively., (© 2024 Wiley‐VCH GmbH.)

Organic self-assembled molecules (OSAMs) based hole-transporting materials play a pivotal role in achieving highly efficient and stable inverted perovskite solar cells (IPSCs). However, the reported carbazol-based OSAMs have serious drawbacks, such as poor wettability for perovskite solution spreading due to the nonpolar surface, worse matched energy arrangement with perovskite, and limited molecular species, which greatly limit the device performance. To address above problems, a novel OSAM [4-(3,6-glycol monomethyl ether-9H-carbazol-9-yl) butyl]phosphonic acid (GM-4PACz) was synthesized as hole-transporting material by introducing glycol monomethyl ether (GM) side chains at carbazolyl unit. GM groups enhance the surface energy of Indium Tin Oxide (ITO)/SAM substrate to facilitate the nucleation and growth of up perovskite film, suppress cation defects, release the residual stress at SAM/perovskite interface, and evaluate energy level for matching with perovskite. Consequently, the GM-4PACz based IPSC achieves a champion PCE of 25.52 %, a respectable open-circuit voltage (V OC ) of 1.21 V, a high stability, possessing 93.29 % and 91.75 % of their initial efficiency after aging in air for 2000 h or tracking at maximum power point for 1000 h, respectively., (© 2024 Wiley-VCH GmbH.)

The success of Y6-type nonfullerene small molecule acceptors (NF-SMAs) in polymer solar cells (PSCs) can be attributed to their unique honeycomb stacking style, which leads to favorable thin-film morphologies. The intermolecular interactions related to the crystallization tendency of these NF-SMAs is closely governed by their electron accepting end groups. For example, the high performance Y6 derivative L8-BO (BTP-4F) presents three types of stacking modes in contrast to two stacking modes of Y6. Hence, it is ultimately interesting to obtain more insight on the packing properties and the preferences influenced by chemical modifications such as end group engineering. This work designs and synthesizes asymmetric and symmetric L8-BO derivatives with brominated end groups and explores the stacking preferences in various modes. The asymmetric BTP-3FBr displays an optimized crystallization tendency and thin film morphology, leading to a decent power conversion efficiency (PCE) of 18.34% in binary devices and a top PCE of 19.32% in ternary devices containing 15 wt% IDIC as the second acceptor., (© 2023 Wiley-VCH GmbH.)