Search

Tetraphenylethylene (TPE) and its derivatives are the most typical and most widely studied organic compounds showing aggregation-induced emission (AIE). Due to their propeller-like structures, V-like clefts exist between the aryl rings, which make them promising host compounds. However, such a possibility is seldom explored. Herein, it is reported that TPE derivatives bearing two or four pyridine rings at the para positions of the phenyl rings (TPE-Pys) can selectively include triangular (Δ-like) m-phthalic acid from a mixture of o-, m-, and p-phthalic acids due to their shape complementary to form host-guest co-crystals, which showed redder emission than the TPE-Pys themselves. The emission of co-crystals 1- 5 could be reversibly switched between yellow and red by alternating exposure to HCl and ammonia vapor. The host-guest co-crystals not only exhibited great potential for selectively recognizing and separating m-phthalic acid and as multicolor emission materials, but are also suitable for use as secret ink due to their reversible color change on varying the host-guest interactions. [ABSTRACT FROM AUTHOR]

A tetraphenylethylene (TPE) Schiff-base macrocycle showing an aggregation-induced emission (AIE) effect has been synthesized, which could aggregate into nanospheres and emit yellow fluorescence in aqueous media. By virtue of its AIE effect, the macrocycle showed a sensitive and selective response to 2,4,6-trinitrophenol (TNP) and 2,4-dinitrophenol (DNP) among a number of nitroaromatic compounds, which could be used to detect TNP and DNP at nanomolar levels. Moreover, it exhibited a superamplified quenching effect with DNP but not with TNP, providing a possible means of discriminating these two compounds. In comparison with open-chain TPE Schiff-bases, the cavity of the macrocycle is essential for the selectivity for DNP over TNP. In addition, quantitative analyses of both DNP and TNP in real water samples and qualitative detection of these two analytes in the solid state by the macrocycle have been tested. The reliability of the quantitative analysis has been confirmed by HPLC. Our findings demonstrate that the TPE Schiff-base macrocycle has great potential as an excellent sensor for DNP and TNP. [ABSTRACT FROM AUTHOR]

The molar heat capacities of three different concentrations of aqueous SrCl2 solutions, 0.1212, 0.4615 and 1.878 mol⋅kg−1, were measured, using a precision automated adiabatic calorimeter in the temperature range from 80 to 320 K. Solid–liquid phase transitions were observed at 272.83, 270.18 and 255.15 K, respectively, for these three solutions. The molar enthalpies and entropies of the phase transitions were evaluated. The experimental heat capacity data were fitted to polynomial equations, and based on the polynomial equations and thermodynamic relationship, the thermodynamic functions relative to 298.15 K, [ H T− H298.15 K] and [ S T− S298.15 K], of the three solutions were derived in the range of 80 to 320 K with an interval of 5 K. [ABSTRACT FROM AUTHOR]

Hypochlorite (ClO - ), as a kind of essential reactive oxygen species, plays a crucial role in vitro and in vivo. Here, a ratiometric fluorescent probe (TPAM) was designed and constructed for sensing ClO - based on substituted triphenylamine and malononitrile, which exhibited obvious colour transfer from orange to colourless under daylight accompanied by noticeable fluorescence change from red to green in response to ClO - . TPAM could effectively monitor ClO - with the merits of fast response, excellent selectivity, high sensitivity and a low detection limit of 0.1014 μM. 1 H NMR, mass spectra and theoretical calculations proved that ClO - caused the oxidation of the carbon-carbon double bond in TPAM, resulting in compound 1 and marked changes in colour and fluorescence. In addition, TPAM was utilized for imaging ClO - in living cells successfully with good photostability and biocompatibility., (© 2023 John Wiley & Sons Ltd.)

Chirality is important to chemistry, biology and optoelectronic materials. The study on chirality has lasted for more than 170 years since its discovery. Recently, chiral materials with aggregation-induced emission (AIE) have attracted increasing interest because of their fascinating photophysical properties. In this review, we discussed the recent development of chiral materials with AIE properties, including their molecular structures, self-assembly and functions. Generally, the most effective strategy to design a chiral AIE luminogen (AIEgen) is to attach a chiral scaffold to an AIE-active fluorophore through covalent bonds. Moreover, some propeller-like or shell-like AIEgens without chiral units exhibit latent chirality upon mirror image symmetry breaking. The chirality of achiral AIEgens can also be induced by some optically active molecules through non-covalent interactions. The introduction of an AIE unit into chiral materials can enhance the efficiency of their circularly polarized luminescence (CPL) in the solid state and the dissymmetric factors of their helical architectures formed through self-assembly. Thus, highly efficient circularly polarized organic light-emitting diodes (CPOLEDs) with AIE characteristics are developed and show great potential in 3D displays. Chiral AIEgens are also widely utilized as "turn on" sensors for rapid enantioselective determination of chiral reagents. It is anticipated that the present review can entice readers to realize the importance of chirality and attract much more chemists to contribute their efforts to chirality and AIE study., Competing Interests: The authors declare no competing financial interests., (This journal is © The Royal Society of Chemistry.)

Tetraphenylethylene (TPE) foldamers with double hairpin-turn linkers showing an aggregation-induced emission (AIE) effect have been synthesized for the first time. A crystal structure of a foldamer-TNT complex has been obtained, enabling unprecedented direct observation of the interactions between TNT molecules and the chromophores of the foldamer. Instead of π-π stacking interactions, which have often been considered to be the key mechanism in the binding of TNT by chromophoric receptors, strong n-π interactions between the nitro groups of TNT and the aromatic rings of the foldamer have been found. Exceptionally, by addition of 1 % NaF to a suspension of the foldamer in H 2 O/THF (95:5), the fluorescence quenching efficiency by TNT vapor significantly increased from about 20 % to more than 90 %. Even after diluting TNT-saturated air at 25 °C by a factor of 2×10 4 , an obvious quenching response was observed, indicating that ultratrace TNT vapor (down to 3.4 fg per mL of air) could be detected., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Coupled plasma atomic emission spectrometry (ICP-AES) was used to determine the trace impurities of Ca, Mg, Al, Fe and Si in industrial sodium chromate. Wavelengths of 167.079, 393.366, 259.940, 279.533 and 251.611 nm were selected as analytical lines for the determination of Al, Ca, Fe, Mg and Si, respectively. The analytical errors can be eliminated by adjusting the determined solution with high pure hydrochloric acid. Standard addition method was used to eliminate matrix effects. The linear correlation, detection limit, precision and recovery for the concerned trace impurities have been examined. The effect of standard addition method on the accuracy for the determination under the selected analytical lines has been studied in detail. The results show that the linear correlations of standard curves were very good (R2 = 0.9988 to 0.9996) under the determined conditions. Detection limits of these trace impurities were in the range of 0.0134 to 0.0280 mg x L(-1). Sample recoveries were within 97.30% to 107.50%, and relative standard deviations were lower than 5.86% for eleven repeated determinations. The detection limits and accuracies established by the experiment can meet the analytical requirements and the analytic procedure was used to determine trace impurities in sodium chromate by ion membrane electrolysis technique successfully. Due to sodium chromate can be changed into sodium dichromate and chromic acid by adding acids, the established method can be further used to monitor trace impurities in these compounds or other hexavalent chromium compounds.

In the present paper a method for the determination of strontium, barium, calcium, magnesium, silicon, iron, aluminum and sulfur in the product of strontium carbonate by X-ray fluorescence spectrometry with pressed powder sample preparation was developed, and the standard samples were synthesized by high purity reagent. As the contents of strontium in the product of strontium carbonate were very high, the phenomenon of spectrum-peak-saturated occurred and the count rate was overflowed according to the measuring condition which was automatically given by the software system of X-ray fluorescence spectrometry. As a result, the deviation of the measurement is greater. According to analyzing the measuring condition of strontium, a method was given for reducing the count rate by reducing the measuring power of strontium, thus achieving the goal of measurement. When sulfate was measured with pressed powder sample, the results were enhanced with the increase in measuring number. In light of this situation, a method was proposed to solve the problem. As the self-forming characteristic of the product of strontium carbonate was not so well, it was very difficult to press the sample successfully. So, the condition of squash method involving the kinds of the adhesives, the mixing technique with powder sample and the pressing-time technique was discussed. During making the sample, it was found that the effects of pellet formation were better if the time could be delayed by 120 seconds. Matrix effect was corrected by alpha coefficient method, the accuracy of the method was evaluated by analysis of synthetic sample. Detection limits of 0.623-107.6 mg x g(-1) were obtained. The results were in good agreement with certified values with precision of < 2.5% RSD.