Search

Accurate timber quantification is essential in forestry and the timber industry, impacting harvest planning, processing, pricing, and overall supply chain management. Traditional methods for estimating the volume of stacked timber, often reliant on manual measurements, are time-consuming and prone to error. This research aims to develop an accurate procedure for estimating the volume of stacked eucalypt timber in yards. The proposed procedure combines automatic log detection and diameter distribution models. Automatic log detection was achieved using advanced computer vision techniques, specifically the You Only Look Once version 9 (YOLOv9) model, which automates the identification and counting of individual logs within a stack. We used stem diameter distribution models to estimate total stack volume based on log counts and probability densities. This approach ensures high accuracy and efficiency, significantly reducing the time and effort required for volume estimation. The dataset used for this study includes diameter measurements from a pre-harvest inventory of eucalypt trees aged 6 and 7 years, alongside videos of stacked timber. The YOLOv9 model was trained to detect logs from these videos, achieving high precision in object detection and segmentation tasks. Performance metrics such as Box Precision, Box Recall, and mean Average Precision (mAP) were used to evaluate the model's effectiveness. The results indicate that the model generalizes well to new data, with high accuracy in both validation and test sets. Among the distribution models evaluated, the generalized extreme value (GEV) distribution provided the best fit for the stem diameter data, allowing for accurate volume predictions. This procedure, which integrates automatic log detection with diameter distribution models, offers a scalable solution applicable to large and complex timber stacks. Finally, a repository was established to allow users to test the proposed method. Future works will focus on refining the model's accuracy and expanding its applicability across different species, forest production and log conditions.

Phoenix acaulis (Roxb.), a common understory shrub in Nepal's Chure region, has remained largely understudied until now. Therefore, this study aims to examine the ecological impact of P. acaulis on Shorea robusta (Gaertn. f.) forest properties and to explore associated community perceptions in S. robusta forest of Udayapur district, Nepal. Stratified random sampling was adopted for this study where P. acaulis density (high, low and absent) was considered as basis of stratification. Altogether, 45 rectangular plots of 10 m x 10 m area (15 each category) were established for regeneration survey and soil sample collection (up to 30 cm). Soil quality index (SQI) method was used for soil quality assessment using indicators on the basis of prior studies conducted in Nepal. Using random sampling, a total of 52 households from the community forest user group were interviewed to gather their insights on the perceived effects of P. acaulis and its management. Highest S. robusta seedling and sapling density was observed in P. acaulis absent area (1132 ± 9.65 ha⁻¹ and 60 ± 0.63 ha⁻¹) where lowest in P. acaulis dense area (548 ± 7.4 ha⁻¹ and 4 ± 0.2 ha⁻¹). Similarly, higher SQI was in areas with high P. acaulis density (0.49) followed by low (0.45) and absent area (0.39). Most respondents advocated for removing P. acaulis from the forest, highlighting significant concerns among stakeholders. Our study suggests a positive impact P. acaulis on soil quality but indicates a negative impact on S. robusta regeneration. Therefore, further research to explore management strategies that balance the positive impact on soil quality with the observed negative influence on regeneration in P. acaulis presence areas is recommended.

Large-scale forest inventory at the individual tree level is critical for natural resource management decision making. Terrestrial Laser Scanning (TLS) has been used for individual tree level inventory at plot scale However, due to the inflexibility of TLS and the complex scene of natural forests, it is still challenging to localize and measure every tree at large scale. In this paper, we present a framework to conduct large-scale natural forest inventory at the individual tree level by taking advantage of deep learning models and Mobile Laser Scanning (MLS) systems. First, a deep learning model, ForestSPG, was developed to perform large-scale semantic segmentation on MLS LiDAR data in natural forests. Then, the forest segmentation results were used for individual stem mapping. Finally, Diameter at Breast Height (DBH) was measured for each individual stem. Two natural forests mapped with backpack and Unmanned Aerial Vehicle (UAV) LiDAR systems were tested. The results showed that the proposed ForestSPG is able to segment large-scale forest LiDAR data into multiple ecologically meaningful classes. The proposed framework was able to localize and measure all 5838 stems at individual tree level in a 20 ha natural forest in less than 20 min using UAV LiDAR. DBH measurement results on trees’ DBH larger than 38.1 cm (15 in) showed that backpack LiDAR was able to achieve 1.82 cm of Root Mean Square Error (RMSE) and UAV LiDAR was able to achieve 3.13 cm of RMSE. The proposed framework can not only segment complex forest components with LiDAR data from different platforms but also demonstrate good performance on stem mapping and DBH measurement. Our research provides and automatic and scalable solution for large-scale natural forest inventory at individual tree level, which can be the basis for large-scale estimation of wood volume and biomass.

Windthrow (i.e., trees broken and uprooted by wind) is a major natural disturbance in Amazon forests. Images from medium-resolution optical satellites combined with extensive field data have allowed researchers to assess patterns of windthrow tree-mortality and to monitor forest recovery over decades of succession in different regions. Although satellites with high spatial-resolution have become available in the last decade, they have not yet been employed for the quantification of windthrow tree-mortality. Here, we address how increasing the spatial resolution of satellites affects plot-to-landscape estimates of windthrow tree-mortality. We combined forest inventory data with Landsat 8 (30 m pixel), Sentinel 2 (10 m), and WorldView 2 (2 m) imagery over an old-growth forest in the Central Amazon that was disturbed by a single windthrow event in November 2015. Remote sensing estimates of windthrow tree-mortality were produced from Spectral Mixture Analysis and evaluated with forest inventory data (i.e., ground true) by using Generalized Linear Models. Field measured windthrow tree-mortality (3 transects and 30 subplots) crossing the entire disturbance gradient was 26.9 ± 11.1% (mean ± 95% CI). Although the three satellites produced reliable and statistically similar estimates (from 26.5% to 30.3%, p < 0.001), Landsat 8 had the most accurate results and efficiently captured field-observed variations in windthrow tree-mortality across the entire gradient of disturbance (Sentinel 2 and WorldView 2 produced the second and third best results, respectively). As expected, mean-associated uncertainties decreased systematically with increasing spatial resolution (i.e., from Landsat 8 to Sentinel 2 and WorldView 2). However, the overall quality of model fits showed the opposite pattern. We suggest that this reflects the influence of a relatively minor disturbance, such as defoliation and crown damage, and the fast growth of natural regeneration, which were not measured in the field nor can be captured by coarser resolution imagery. Our results validate the reliability of Landsat imagery for assessing plot-to-landscape patterns of windthrow tree-mortality in dense and heterogeneous tropical forests. Satellites with high spatial resolution can improve estimates of windthrow severity by allowing the quantification of crown damage and mortality of lower canopy and understory trees. However, this requires the validation of remote sensing metrics using field data at compatible scales.

Trestima® is a computer vision-based smartphone application that utilises relascope theory to obtain estimates of forest attributes from smartphone photographs. The aim of this study was to investigate the accuracy of Trestima estimation and evaluate whether it is sufficiently accurate for operational use in forestry. Our data consisted of 37 forest stands, encompassing 73.5 ha in southeastern Finland, where Trestima estimates were obtained by forestry professionals during their work. The results were compared with harvester data obtained from clear-cut stands. The number of photographs taken per stand ranged between 1-29 (average: 7.3; standard deviation: 5.0). The total amount of industrial roundwood harvested from the stands was 21.531 m3 and the average harvest removal per hectare was 282 m3. The accuracy of Trestima estimation was relatively good when ≥ 10 photographs per stand were taken. In this case, the root mean square error percent (RMSE%) value associated with roundwood volume was 17.7%. When the number of photographs per stand was < 10, the accuracy of Trestima was much weaker (RMSE% 22.7-55.3%). On average, Trestima underestimated harvested volumes in Scots pine (Pinus sylvestris L.) stands (Bias% 11.4-89.2), although the bias was smaller (Bias% -12.7-12.4) with Norway spruce (Picea abies [L.] Karst.) stands. The Trestima smartphone application is a possible option for traditional field measurements in operational forestry, provided that its usage instructions are strictly followed, which is not always the case in practice.

Among the land use–land cover products, tree cover maps are essential tools for assessing forest functionality and ecosystem services, and implementing sustainable forest management. By combining open-source and ancillary high-resolution cartographic datasets, this study aims to map trees and forests in the Latium region in central Italy, highlighting their spatial configuration, function, and forest typology. The main findings show that trees cover 44.2% of the regional land area. Forests cover 508,056 ha, forming the core matrix of the Latium mountain landscape, providing significant ecological and socio-economic value for forest management and the regional wood supply chain. Although trees outside the forest represent only 3.1% of regional tree cover, they play a crucial role in enhancing ecological connectivity and landscape resilience. Approximately 2% of the tree and forest cover occurs in urban areas, contributing significantly to climate regulation and air quality in densely populated environments. The dominant forest types in Lazio include Turkey oak, temperate broadleaf, beech, downy oak, and Holm oak, which together account for 58.6% of the total tree cover. The accuracy tests confirm the feasibility of using open-source data for reliable, cost-effective forest mapping. Regular updates of these maps can support continuous monitoring and promote sustainable forest management practices.

Inventorying forest ecosystems is an essential part of forest management planning. However, it is quite costly and time-consuming, particularly for larger areas. Recently, significant developments have been made in unmanned aerial vehicle (UAV) technology to improve the cost and time efficiency in forest inventory. Therefore, UAV images have become one of the inventory tools that produces data with high spatial resolution in determining forest resources. This study aims to investigate the contribution of UAV data to forest inventory in a case study area with a total of 30 sample plots located in pure and natural Crimean pine (Pinus nigra J.F. Arnold ssp. pallasiana (Lamb.) Holmboe) stands in the Black Sea backward region of Türkiye. Total tree height (h) and stem volume (v) were recorded at individual tree level (n = 367), and the number of trees (N), mean height (hmean), top height (htop), stand basal area (BA) and stand volume (V) were calculated at sample plot level (n = 30) from both the field and UAV-based data. Pearson's correlation coefficients (r) for h and v were 0.96 and 0.72, respectively, the highest correlation at the sample plot level was observed for the hmean - htop (r = 0.96), while the lowest correlation was found for BA (r = 0.54). The suitability of the observation and prediction values was assessed using a t-test at both individual tree and sample plot levels. According to the t-test results, the observation and prediction values for h, v, hmean, htop, BA and V metrics were found to be compatible (p > 0.05), but not for N (p < 0.05). Overall results indicated that UAV technology has a potential to be used in forest inventory and can contribute to the determination of individual tree and stand metrics. Thereby, it saves cost and time in forest inventory studies and helps monitoring the dynamic structure of the forest ecosystem with an effective approach in forest inventory. [ABSTRACT FROM AUTHOR]

Recent advances in sensor and algorithmic technologies have led to the exploration of remote/proximal sensing for automated forest inventory at various scales. For detailed below-canopy mapping to derive critical forest biometrics, such as diameter at breast height (DBH), merchantable height, and debris volume, under-canopy mobile LiDAR mapping is preferred. These mapping systems typically rely on an onboard integrated global navigation satellite system/inertial navigation system (GNSS/INS) unit for point cloud generation. The main challenge of such under-canopy mapping is the intermittent access to the GNSS signal, which is crucial to deriving accurately georeferenced mapping products. Advances in Simultaneous Localization and Mapping (SLAM) offer an alternative to GNSS/INS-assisted georeferencing in GNSS-denied/challenging scenarios. In this study, we propose a general and comprehensive Forest Feature LiDAR SLAM framework that encompasses odometry and mapping threads for a 3D LiDAR unit mounted on backpack systems to achieve accurate forest inventories. In the odometry thread, ground/tree trunk features are extracted from LiDAR scans (i.e., points from a full revolution of the laser beams) and used to estimate the transformation between successive scans. The mapping thread performs local/global least squares adjustment (LSA) using derived features to register LiDAR scans to a common reference frame. One advantage of the proposed framework is that the tree trunk features and ground information – which are critical to forest inventory applications – are directly derived in the SLAM process, making it superior to other geometric feature-based approaches. Additionally, relative trajectory information provided by onboard navigation units and/or reference point clouds from other sources can be incorporated into the process. In this study, three in-house developed backpack systems with varying specifications were used to collect data in complex forest areas. The proposed SLAM strategy was performed on these datasets and compared with point clouds acquired by uncrewed aerial vehicle (UAV) and a commercial backpack LiDAR system. Experimental results suggested that the proposed framework can produce point clouds with satisfactory intra-dataset alignment quality (in the range of 2–4 cm) and positional accuracy (around 10 cm) for all backpack systems. [ABSTRACT FROM AUTHOR]

Precisely estimating the position, diameter at breast height (DBH), and height of trees is essential in forest resource inventory. Augmented reality (AR)-based devices help overcome the issue of inconsistent global point cloud data under thick forest canopies with insufficient Global Navigation Satellite System (GNSS) coverage. Although monocular simultaneous localization and mapping (SLAM) is one of the current mainstream systems, there is still no monocular SLAM solution for forest resource inventories, particularly for the precise measurement of inclined trees. We developed a forest plot survey system based on monocular SLAM that utilizes array cameras and Inertial Measurement Unit (IMU) sensors provided by smartphones, combined with augmented reality technology, to achieve a real-time estimation of the position, DBH, and height of trees within forest plots. Our results from the tested plots showed that the tree position estimation is unbiased, with an RMSE of 0.12 m and 0.11 m in the x-axis and y-axis directions, respectively; the DBH estimation bias is −0.17 cm (−0.65%), with an RMSE of 0.83 cm (3.59%), while the height estimation bias is −0.1 m (−0.95%), with an RMSE of 0.99 m (5.38%). This study will be useful in designing an algorithm to estimate the DBH and position of inclined trees using point clouds constrained by sectional planes at the breast height of the trunk, developing an algorithm to estimate the height of inclined trees utilizing the relationship between rays and plane positions, and providing observers with visual measurement results using augmented reality technology, allowing them to judge the accuracy of the estimates intuitively. Clearly, this system has significant potential applications in forest resource management and ecological research. [ABSTRACT FROM AUTHOR]

The management of plantation forests using precision forestry requires advanced inventory methods. Unmanned aerial vehicle laser scanning (ULS) offers a cost-effective approach to accurately estimate forest structural attributes at both plot and individual tree levels. We examined the utility of ULS data collected from a radiata pine stand for tree detection and prediction of diameter at breast height (DBH) and stem volume, using data thinned to 13-point densities (ranging from 10–12,200 points/m2). These datasets were created using a DTM with the highest pulse density and DTMs that used the native decimated point clouds. Models of DBH were constructed using partial least squares (PLS) and random forest (RF) from seven classes of metrics that characterized the horizontal and vertical structure of the canopy. Individual tree segmentation was consistently accurate across the 13-point densities and was insensitive to DTM type (F1 scores > 0.96). Predictions of DBH using PLS models were consistently more accurate than RF models and accuracy was insensitive to the DTM type. Using data from the native DTMs, DBH estimation using PLS had the lowest RMSE of 1.624 cm (R2 of 0.756) at a point density of 12,200 points/m2. Stem volume predictions made using PLS predictions of DBH and height from the ULS had the lowest RMSE of 0.0418 m3 (R2 of 0.792) at 12,200 points/m2. The RMSE values for DBH and volume remained relatively stable from 12,200 to between 750 and 400 points/m2, with reductions in accuracy occurring as point density declined below this threshold. Overall, these findings have significant implications, particularly for the precise estimation of DBH and stem volume at the individual tree level. They demonstrate the potential of cost-effective ULS sensors for rapid and frequent plantation forest assessment, thereby enhancing the application of light detection and ranging (LiDAR) technology in plantation forest management. [ABSTRACT FROM AUTHOR]

On-the-ground sample-based forest inventory methods have been the standard practice for more than a century, however, remote sensing technologies such as airborne laser scanning (ALS) are providing wall-to-wall inventories based on individual tree measurements. In this study, we assess the accuracy of individual tree height, diameter, and volume derived from field-cruising measurements and three ALS data-derived methods in a 1.1 ha stand using direct measurements acquired on felled trees and log-scale volume measurements. Results show that although height derived from indirect conventional field measurements and ALS were statistically equivalent to felled tree height measurements, ALS measured heights had lower root mean square error (RMSE) and bias. Individual tree diameters modeled using a height-to-diameter-at-breast-height model derived from local forest inventory data and the software ForestView had moderate RMSE (8.3–8.5 cm) and bias (-3.0 – -0.3 cm). The ALS-based methods underdetected trees but accounted for 78%–91% of the field reference harvested merchantable volume and 71%–99% of the merchantable volume scaled at the mill. The results also illustrate challenges of using mill-scaled volume estimates as validation data and highlight the need for more research in this area. Overall, the results provide key insights to forest managers on accuracies associated with conventional field-derived and ALS-derived individual tree inventories. Study Implications : Forest inventory data provide critical information for operational decisions and forest product supply chain planning. Traditionally, forest inventories have used field sampling of stand conditions, which is time-intensive and cost-prohibitive to conduct at large spatial scales. Remote sensing technologies such as airborne laser scanning (ALS) provide wall-to-wall inventories based on individual tree measurements. This study advances our understanding of the accuracy of conventional field-derived and ALS-derived individual tree inventories by evaluating these inventories with felled tree and log scaling data. The results provide key insights to forest managers on errors associated with conventional field and ALS-derived individual tree measurements. [ABSTRACT FROM AUTHOR]

The use of mobile laser scanning to survey forest ecosystems is a promising, scalable technology to describe forest 3D structures at high resolution. To confirm the consistency in the retrieval of forest structural parameters using hand-held laser scanning (HLS), before operationalizing the method, confirming the data is crucial. We analyzed the performance of tree-level mapping based on HLS under different phenology conditions on a mixed forest in western Spain comprising Pinus pinaster and two deciduous species, Alnus glutinosa and Quercus pyrenaica. The area was surveyed twice during the growing season (July 2022) and once in the deciduous season (February 2022) using several scanning paths. Ground reference data (418 trees, 15 snags) was used to calibrate the HLS data and to assess the influence of phenology when converting 3D data into tree-level attributes (DBH, height and volume). The HLS-based workflow was robust at isolating tree positions and recognizing stems despite changes in phenology. Ninety-six percent of all pairs matched below 65 cm. For DBH, phenology barely altered estimates. We observed a strong agreement when comparing HLS-based tree height distributions. The values exceeded 2 m when comparing height measurements, confirming height data should be carefully used as reference in remote sensing-based inventories, especially for deciduous species. Tree volume was more precise for pines (r = 0.95, and relative RMSE = 21.3 –23.8%) compared to deciduous species (r = 0.91 –0.96, and relative RMSE = 27.3–30.5%). HLS data and the forest structural complexity tool performed remarkably, especially in tree positioning considering mixed forests and mixed phenology conditions. [ABSTRACT FROM AUTHOR]

Copyright of Ecosistemas y Recursos Agropecuarios is the property of Universidad Juarez Autonoma de Tabasco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Given the severe anthropogenic pressure on tropical forests and the high demand for field observations of ecosystem characteristics, it is crucial to collect such data both in pristine tropical forests and in the converted deforested land cover classes. To gain insight into the ecosystem characteristics of pristine tropical forests, regrowth forests, and cashew plantations, we established an ecosystem monitoring site in Phnom Kulen National Park, Cambodia. Here, we present observed datasets of forest inventories, leaf area index, leaf traits of woody species, a fraction of intercepted photosynthetically active radiation, and edaphic and meteorological conditions. We examined how land-use and land-cover change affect species and functional diversity, stand structure, and edaphic conditions among the three land-cover classes. We further investigated relationships between diameters at breast height and tree height, estimated aboveground biomass (AGB), and explored relationships between ecosystem characteristics and AGB. We uncovered some key differences in ecosystem characteristics among the land-cover classes. We also demonstrated the feasibility of locally updating AGB estimates using power law functions. These datasets and findings can contribute to filling data gaps in tropical forest research, addressing global environmental challenges, and supporting sustainable forest management. [ABSTRACT FROM AUTHOR]

Personal laser scanning devices employing Simultaneous Localization and Mapping (SLAM) technology have rightfully gained traction in various applications, including forest mensuration and inventories. This study focuses the inherent stochastic noise in SLAM data. An analysis of noise distribution is performed in GeoSLAM ZEB Horizon for point clouds of trees of two species, Norway spruce and European beech, to mitigate bias in diameter estimates. The method involved evaluating residuals of individual 3D points concerning the real tree surface model based on TLS data. The results show that the noise is not symmetrical regarding the real surface, showing significant negative difference, and moreover, the difference from zero mean significantly differs between species, with an average of −0.40 cm for spruce and −0.44 cm for beech. Furthermore, the residuals show significant dependence on the return distance between the scanner and the target and the incidence angle. An experimental comparison of RANSAC circle fitting outcomes under various configurations showed unbiased diameter estimates with extending the inlier tolerance to 5 cm with 2.5 cm asymmetry. By showing the nonvalidity of the assumption of zero mean in diameter estimation methods, the results contribute to fill a gap in the methodology of data processing with the widely utilized instrument. [ABSTRACT FROM AUTHOR]

This study assessed tree growth variables, above (AGB), below ground biomass (BGB) and total carbon content (TC) sequestered by Parkia biglobosa (Jacq.) Bench. Plantation in Wasangare, Oyo State using non-destructive ground base survey. Tree growth data (Diameter at breast height, Dbh and Tree height, Th) were collected using lacer ace hypsometer and diameter girth tape from 20 temporary sampling plots of size 25 m X 25 m established through systematic transect lines. Diameter size classes (DSC) for the plantation was examined, carbon stock for each DSC was also determine while basal area (m2 ha-1), volume (m3 ha-1), Biomass (Mg ha-1) and Carbon (Mg ha-1) were also estimated. Results showed mean Dbh of 18.7 + 0.25 cm with 8.14 + 0.10 m, 0.033 + 0.00 m2 ha-1 and 0.320 + 0.01 m3 ha-1 for tree height, basal area and volume respectively. AGB and BGB were 10.877 + 0.39 Mgha-1 and 2.175 + 0.08 Mgha-1 respectively while TC was 6.527 + 0.24 Mgha-1. The percentage carbon stock proportion for each DSC revealed class size 25-29-9 cm (19.02%) as the highest while the least proportion was observed in less than 5 cm class with 0.04% of carbon. The DSC showed majority of the tree Dbh in lower Dbh classes with fewer trees in higher classes forming almost a normal bell shape. The study provides information that can help the management in planning silvicultural activities and selective removal from the stand (harvesting schedule).  Tree Dbh, height, basal area, volume and biomass are the determinant characteristics for forest carbon assessment. In conclusion, the plantation actively sequesters carbon showing potentials for indigenous trees in climate change mitigation. [ABSTRACT FROM AUTHOR]

Precise individual tree or sample-based inventories derived from 3D point cloud data of mobile laser scanning can improve our comprehensive understanding of the structure, function, resilience, biodiversity, and ecosystem services of urban forests. This study assessed the performance of a handheld laser scanning system (HLS) for the extraction of tree position, diameter at breast height (DBH), and tree height (H) in an urban area. A total of 2083 trees of 13 species from 34 plots were analyzed. The results showed that the registration of tree positions using ground control points (GCPs) demonstrated high accuracy, with errors consistently below 0.4 m, except for a few instances. The extraction accuracy of DBH for all trees and individual species remained consistently high, with a total root mean square error (RMSE) of 2.06 cm (6.89%) and a bias of 0.62 cm (2.07%). Notably, broad-leaved trees outperformed coniferous trees, with RMSE and bias values of 1.86 cm (6%) and 0.76 cm (2.46%), respectively, compared to 2.54 cm (9.46%) and 0.23 cm (0.84%), respectively. The accuracy of H extraction varied significantly among different species, with R2 values ranging from 0.65 to 0.92. Generally, both DBH and H were underestimated compared to ground measurements. Linear mixed-effects models (LMEs) were applied to evaluate factors affecting the performance of HLS with the plot as a random factor. LME analysis revealed that plant type and terrain significantly influenced the accuracy of DBH and H derived from HLS data, while other fixed factors such as plot area, tree density, and trajectory length showed no significance. With a large sample size, we concluded that the HLS demonstrated sufficient accuracy in extracting individual tree parameters in urban forests. [ABSTRACT FROM AUTHOR]

Conserving plant diversity is integral to sustainable forest management. This study aims at diversifying tools to map spatial distribution of species richness. We develop a sampling strategy of using rapid assessments by local communities to gather prior information on species richness distribution to drive census cell selection by sampling with covariate designs. An artificial neural network model is built to predict the spatial patterns. Accuracy and consistency of rapid assessment factors, sample selection methods, and sampling intensity of census cells were tested in a simulation study with seven 25–50-ha census plots in the tropics and subtropics. Results showed that identifying more plant individuals in a rapid assessment improved accuracy and consistency, while transect was comparable to or slightly better than nearest-neighbor assessment, but knowing more species had little effects. Results of sampling with covariate designs depended on covariates. The covariate I freq, inverse of the frequency of the rapidly assessed species richness strata, was the best choice. List sampling and local pivotal method with I freq increased accuracy by 0.7%–1.6% and consistency by 7.6%–12.0% for 5% to 20% sampling intensity. This study recommends a rapid assessment method of selecting 20 individuals at every 20-m interval along a transect. Knowing at least half of the species in a forest that are abundant is sufficient. Local pivotal method is recommended at 5% sampling intensity or less. This study presents a methodology to directly involve local communities in probability-based forest resource assessment to support decision-making in forest management. [ABSTRACT FROM AUTHOR]

Trunk diameter is related to the overall health and level of carbon sequestration in a tree. Trunk diameter measurement, therefore, is a key task in both forest plot and urban settings. Unlike the traditional approach of manual measurement with a measuring tape or calipers, several recent approaches rely on sophisticated technologies such as LiDAR and time-of-flight cameras that provide fine-grain depth maps, which are used for depth-assisted image segmentation in downstream processing. These technologies are supported only on specialized devices or high-end smartphones. We present a mobile application that uses coarse-grain depth maps derived from an optical sensor, and so can be run on most common Android devices. Moreover, we use a state-of-the-art deep neural network to estimate trunk diameter from an image and its corresponding coarse depth map (RGB-D). We tested our app using a data set collected from four countries and under challenging conditions including occlusion, leaning trees, and irregular shapes and found that our algorithm has a MAE of 1.66 cm and an RMSE of 2.46 cm, which is comparable to accuracy from fine-grain depth maps. Moreover, diameter measurement using our app is >5 times faster than traditional manual surveying.

Introduction: The knowledge about forest growth, influenced by factors such as tree species, tree age, and environmental conditions, is a key for future forest preservation. Height and age data can be combined to describe forest growth and used to infer known environmental effects.Methods: In this study, we built 14 height growth curves for stands composed of monospecific or mixed species using ground measurements and satellite data. We built a random forest height model from tree species, age, area of disturbance, and 125 environmental parameters (climate, altitude, soil composition, geology, stand ownership, and proximity to road and urban areas). Using feature elimination and SHapley Additive exPlanations (SHAP) analysis, we identified six key features explaining the forest growth and investigated how they affect the height.Results: The agreement between satellite and ground data justifies their simultaneous exploitation. Age and tree species are the main predictors of tree height (49% and 10%, respectively). The disturbed patch area, revealing the regeneration method, impacts post-disturbance growth at 19%. The soil pH, altitude, and climatic water budget in summer impact tree height differently depending on the age and tree species.Discussion: Methods integrating satellite and field data show promise for analyzing future forest evolution.

Abstract Forests are a large carbon sink and could serve as natural climate solutions that help moderate future warming. Thus, establishing forest carbon baselines is essential for tracking climate‐mitigation targets. Western US forests are natural climate solution hotspots but are profoundly threatened by drought and altered disturbance regimes. How these factors shape spatial patterns of carbon storage and carbon change over time is poorly resolved. Here, we estimate live and dead forest carbon density in 19 forested western US ecoregions with national inventory data (2005–2019) to determine: (a) current carbon distributions, (b) underpinning drivers, and (c) recent trends. Potential drivers of current carbon included harvest, wildfire, insect and disease, topography, and climate. Using random forests, we evaluated driver importance and relationships with current live and dead carbon within ecoregions. We assessed trends using linear models. Pacific Northwest (PNW) and Southwest (SW) ecoregions were most and least carbon dense, respectively. Climate was an important carbon driver in the SW and Lower Rockies. Fire reduced live and increased dead carbon, and was most important in the Upper Rockies and California. No ecoregion was unaffected by fire. Harvest and private ownership reduced carbon, particularly in the PNW. Since 2005, live carbon declined across much of the western US, likely from drought and fire. Carbon has increased in PNW ecoregions, likely recovering from past harvest, but recent record fire years may alter trajectories. Our results provide insight into western US forest carbon function and future vulnerabilities, which is vital for effective climate change mitigation strategies.

Stand-level forest tree species perception and identification are needed for monitoring-related operations, being crucial for better biodiversity and inventory management in forested areas. This paper contributes to this knowledge domain by researching tree trunk types multispectral perception at stand-level. YOLOv5 and YOLOv8 - Convolutional Neural Networks specialized at object detection and segmentation - were trained to detect and segment two tree trunk genus (pine and eucalyptus) using datasets collected in a forest region in Portugal. The dataset comprises only two categories, which correspond to the two tree genus. The datasets were manually annotated for object detection and segmentation with RGB and RGB-NIR images, and are publicly available. The “Small” variant of YOLOv8 was the best model at detection and segmentation tasks, achieving an F1 measure above 87% and 62%, respectively. The findings of this study suggest that the use of extended spectra, including Visible and Near Infrared, produces superior results. The trained models can be integrated into forest tractors and robots to monitor forest genus across different spectra. This can assist forest managers in controlling their forest stands.

The Cerrado has high plant and vertebrate diversity and is an important biome for conserving species and provisioning ecosystem services. Volume equations in this biome are scarce because of their size and physiognomic diversity. This study was conducted to develop specific volumetric models for the phytophysiognomies Gallery Forest, Dry Forest, Forest Savannah, and Savannah Woodland, a generic model and a model for Cerrado forest formation. Twelve 10 m × 10 m (100 m²) (National Forest Inventory) plots were used for each phytophysiognomy at different sites (regions) of the Federal District (FD) where trees had a diameter at breast height (DBH; 1.30 m) ≥5 cm in forest formations and a diameter at base height (Db; 0.30 m) ≥5 cm in savanna formations. Their diameters and heights were measured, they were cut and cubed, and the volume of each tree was obtained according to the Smalian methodology. Linear and nonlinear models were adjusted. Criteria for the selection of models were determined using correlation coefficients, the standard error of the estimates, and a graphical analysis of the residues. They were later validated by the chi-square test. The resultant models indicated that fit by specific phytophysiognomy was ideal; however, the generic and forest formation models exhibited similar performance to specific models and could be used in extensive areas of the Cerrado, where they represent a high potential for generalization. To further increase our understanding, similar research is recommended for the development of specific and generic models of the total volume in Cerrado areas.

Research related to Cerradão vegetation focuses more on the floristic-structural aspect, with rare studies on the quantification of volume and biomass stocks, and even fewer investigating the increments of these attributes. Using a systematic sampling method with subdivided strips and 400 m2 plots, the density found was 1135, 1165, and 1229 trees/ha in 2012, 2020, and 2023, respectively, in Lajeado State Park, Tocantins State, Brazil. Volume was estimated using the equation v=0.000085D2.122270H0.666217, and biomass was estimated using the equation AGB=0.0673ρD2H0.976. Vegetation dynamics were assessed using growth increment, recruitment, mortality, turnover rate, and time. The results indicated that dynamics have increased since the start of monitoring. Typical Cerrado species, in the strict sense, were replaced by those from forest environments. The total production in volume and biomass was 160.91 m3/ha and 118.10 Mg/ha, respectively, in 2023. The species of Emmotum nitens, Mezilaurus itauba, Ocotea canaliculata, and Sacoglottis guianensis showed the highest increment values in volume and biomass. For the community, the average values were 4.04 m3/ha/year and 3.54 Mg/ha/year. The community has not yet reached its carrying capacity and stores a significant amount of biomass. This is influenced by the transition of the study area from an exploited environment to a conservation unit (park) and by its location in a transitional area with the Amazon biome.

The carbon stock in living forest biomass was quantified based on first-cycle State Forest Inventory (SFI) measurements in permanent sample plots. The total carbon stock in above- and below-ground living biomass was assessed to be 46.9 ±0.4 × 109 tons C and average carbon stock at 52.1 ±0.5 t C ha–1 as of 2020. The State Forest Register (SFR), the primary source of consolidated information on Russia’s forests, estimates the forest growing stock to be 83.1 × 109 m3. The total growing stock volume in the forests, according to the SFI amounted to 113.1 × 109 m3. Owing to the updated and significantly higher growing stock volume, the estimate of carbon stock in living bio-mass is approximately 35% higher than previously reported. The uncertainty of the total and average carbon stocks based on SFI data was substantially lower (approximately ±1%) than that reported in previous studies (±15–30%). Methods of accounting for the carbon stock in living biomass, the results of calculations for forest lands throughout the country, units of the administrative division, and forest zoning were considered. Assessment of living biomass based on representative sampling can substantially improve the relevance and reliability of national forest reporting.

Distance sampling and its statistically improved variant, T-square sampling, are important sampling methods in plant ecology. They have often been applied in the context of plant density estimations and are comparatively easy to implement, since they intuitively follow the nearest-neighbour principle and thus do not require the layout of sample plots. Previous research studying distance sampling suggested that T-square sampling may also lead to an improved estimation of spatial tree diversity indices. We simulated distance and T-square sampling in six large fully mapped forest areas for seven tree diversity indices of which some competed for the same diversity aspect, i.e. tree location (dispersion), tree species and tree size diversity. Our results demonstrated that both distance and T-square sampling are indeed robust methods for sampling spatial measures of tree diversity. The sample size required for a sampling error of 10% does not exceed 20% of the total number of trees in a sampling area. T-square sampling has the ability to adapt to different spatial patterns of tree locations and this ability is key to the way the method controls estimation bias. The sample size required for species mingling and size differentiation clearly depends on the underlying spatial tree pattern in the sampling area. With most diversity indices, sample size reductions between 0.06% and 40% could be achieved by the application of T-square sampling compared to traditional distance sampling. All other conditions being equal, we could identify the uniform angle index, the species mingling index and the size differentiation index as those diversity indices achieving lower sampling error values than their competitors. For tree density estimations the Diggle and Byth estimators performed best. Based on our results, T-square sampling can be considered a robust sampling method for spatial tree diversity indices that is easy to apply in the field.

Following harvest, monitoring reforestation success is a crucial component of sustainable management. In Alberta, Canada, like other jurisdictions, the efficiency of the current plot-based forest regeneration monitoring regime is challenged by the cost of accessibility and the declining availability of qualified field crews. Fine spatial resolution imagery and deep learning have been proposed as alternative monitoring tools and have proven successful under experimental conditions, yet how successfully models can be applied and transferred between a range of untrained sites and conditions remains unclear.In this research, we repurposed a mask region-based convolutional neural network (Mask R–CNN) model that was previously trained to delineate coniferous tree crowns to instead segment instances of two species of regenerating conifers. We transferred learned parameters by replacing original single-class labels with photo-interpreted species information and retraining a selection of the network's parameters. We assessed the transferability of the new model by testing on five untrained sites, representing a range of forest types and densities typical of reforestation in the region. Results yielded a mean average precision (mAP) of 72% and average class F1 scores of 69% and 78% for lodgepole pine (Pinus contorta) and white spruce (Picea glauca), respectively, demonstrating successful transferability. We then investigated an additional transfer learning scenario by iteratively adding data from four of the five sites to the training set while reserving data from the remaining site for testing. On average, this improved mAP by 5%, lodgepole pine F1 by 7%, and white spruce F1 by 3%, and demonstrated that trained models can be continuously improved as sufficiently representative data becomes available.

This study assessed tree growth variables, above (AGB), below ground biomass (BGB) and total carbon content (TC) sequestered by Parkia biglobosa (Jacq.) Bench. Plantation in Wasangare, Oyo State using non-destructive ground base survey. Tree growth data (Diameter at breast height, Dbh and Tree height, Th) were collected using lacer ace hypsometer and diameter girth tape from 20 temporary sampling plots of size 25 m X 25 m established through systematic transect lines. Diameter size classes (DSC) for the plantation was examined, carbon stock for each DSC was also determine while basal area (m2 ha-1), volume (m3 ha-1), Biomass (Mg ha-1) and Carbon (Mg ha-1) were also estimated. Results showed mean Dbh of 18.7 + 0.25 cm with 8.14 + 0.10 m, 0.033 + 0.00 m2 ha-1 and 0.320 + 0.01 m3 ha-1 for tree height, basal area and volume respectively. AGB and BGB were 10.877 + 0.39 Mgha-1 and 2.175 + 0.08 Mgha-1 respectively while TC was 6.527 + 0.24 Mgha-1. The percentage carbon stock proportion for each DSC revealed class size 25-29-9 cm (19.02%) as the highest while the least proportion was observed in less than 5 cm class with 0.04% of carbon. The DSC showed majority of the tree Dbh in lower Dbh classes with fewer trees in higher classes forming almost a normal bell shape. The study provides information that can help the management in planning silvicultural activities and selective removal from the stand (harvesting schedule). Tree Dbh, height, basal area, volume and biomass are the determinant characteristics for forest carbon assessment. In conclusion, the plantation actively sequesters carbon showing potentials for indigenous trees in climate change mitigation.

Copyright of Forestry Chronicle is the property of Canadian Institute of Forestry and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Fire Ecology is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Global change drivers are altering forest dynamics, yet how these factors influence tree survival across early developmental stages (i.e., seedling to recruited sapling) over large geographies is not well understood. We developed a novel approach to evaluate controls on seedling and sapling survival. This approach was demonstrated on a set of systematic forest inventory plots across the northeastern USA in which seedlings were tallied within six height classes, allowing for a detailed assessment of the stages at which demographic bottlenecks in juvenile tree development are often observed. Forest inventory subplots containing a study species were divided into overlapping bins along an environmental or ecological gradient, and ratios of abundance between successive size classes were used to infer relative survival rates. Relationships between 10 common tree species and tree density, shrub cover, and mean annual temperature were assessed. As seedling height class increased, we observed shifts from positive to negative associations with shrub cover and large tree density. Our results suggest that observed patterns of sapling and tree abundance may belie complex and sometimes opposing influences on seedling survival that are important to quantify when predicting and managing for successful tree recruitment and future canopy tree composition. [ABSTRACT FROM AUTHOR]

The combined use of LiDAR (Light Detection And Ranging) scanning and field inventories can provide spatially continuous wall-to-wall information on forest characteristics. This information can be used in many ways in forest mapping, scenario analyses, and forest management planning. This study aimed to find the optimal way to obtain continuous forest data for Catalonia when using kNN imputation (kNN stands for “k nearest neighbors”). In this method, data are imputed to a certain location from k field-measured sample plots, which are the most similar to the location in terms of LiDAR metrics and topographic variables. Weighted multidimensional Euclidean distance was used as the similarity measure. The study tested two different methods to optimize the distance measure. The first method optimized, in the first step, the set of LiDAR and topographic variables used in the measure, as well as the transformations of these variables. The weights of the selected variables were optimized in the second step. The other method optimized the variable set as well as their transformations and weights in one single step. The two-step method that first finds the variables and their transformations and subsequently optimizes their weights resulted in the best imputation results. In the study area, the use of three to five nearest neighbors was recommended. Altitude and latitude turned out to be the most important variables when assessing the similarity of two locations of Catalan forests in the context of kNN data imputation. The optimal distance measure always included both LiDAR metrics and topographic variables. The study showed that the optimal similarity measure may be different for different regions. Therefore, it was suggested that kNN data imputation should always be started with the optimization of the measure that is used to select the k nearest neighbors. [ABSTRACT FROM AUTHOR]

Forests play a significant role in sequestering carbon and regulating the global carbon and energy cycles. Accurately estimating forest biomass is crucial for understanding carbon stock and sequestration, forest degradation, and climate change mitigation. This study was conducted to estimate above-ground biomass (AGB) and compare the accuracy of the AGB estimating models using LiDAR (light detection and ranging) data and forest inventory data in the central Terai region of Nepal. Airborne LiDAR data were collected in 2021 and made available by Nepal Ban Nigam Limited, Government of Nepal. Thirty-two metrics derived from the laser-scanned LiDAR point cloud data were used as predictor variables (independent variables), while the AGB calculated from field data at the plot level served as the response variable (dependent variable). The predictor variables in this study were LiDAR-based height and canopy metrics. Two statistical methods, the stepwise linear regression (LR) and the random forest (RF) models, were used to estimate forest AGB. The output was an accurate map of AGB for each model. The RF method demonstrated better precision compared to the stepwise LR model, as the R2 metric increased from 0.65 to 0.85, while the RMSE values decreased correspondingly from 105.88 to 60.9 ton/ha. The estimated AGB density varies from 0 to 446 ton/ha among the sample plots. This study revealed that the height-based LiDAR metrics, such as height percentile or maximum height, can accurately and precisely predict AGB quantities in tropical forests. Consequently, we confidently assert that substantial potential exists to monitor AGB levels in forests effectively by employing airborne LiDAR technology in combination with field inventory data. [ABSTRACT FROM AUTHOR]

Standardizing and translating species names from different databases is key to the successful integration of data sources in biodiversity research. There are numerous taxonomic name-resolution applications that implement increasingly powerful namecleaning and matching approaches, allowing the user to resolve species relative to multiple backbones simultaneously. Yet there remains no principled approach for combining information across these underlying taxonomic backbones, complicating efforts to combine and merge species lists with inconsistent and conflicting taxonomic information. Here, we present Treemendous, an open-source software package for the R programming environment that integrates taxonomic relationships across four publicly available backbones to improve the name resolution of tree species. By mapping relationships across the backbones, this package can be used to resolve datasets with conflicting and inconsistent taxonomic origins, while ensuring the resulting species are accepted and consistent with a single reference backbone. The user can chain together different functionalities ranging from simple matching to a single backbone, to graphbased iterative matching using synonym-accepted relations across all backbones in the database. In addition, the package allows users to 'translate' one tree species list into another, streamlining the assimilation of new data into preexisting datasets or models. The package provides a flexible workflow depending on the use case, and can either be used as a stand-alone name-resolution package or in conjunction with existing packages as a final step in the name-resolution pipeline. The Treemendous package is fast and easy to use, allowing users to quickly merge different data sources by standardizing their species names according to the regularly updated database. By combining taxonomic information across multiple backbones, the package increases matching rates and minimizes data loss, allowing for more efficient translation of tree species datasets to aid research into forest biodiversity and tree ecology. [ABSTRACT FROM AUTHOR]

Volumetric quantification of Eucalyptus sp. stands through aerial photographs obtained by RPAS. The data collection for forest management is necessary to carry out the inventory, being a procedure that requires field work, high cost and time. Therefore, the objective of this work was to develop dendrometric equations based on aerial images of RPAS (Remotely Piloted Aircraft System) combined with the manipulation of vector data, and to estimate the forest production of Eucalyptus sp., in the southern region of the state of Rondônia. The extraction of the variables crown projection area (ACRPAS) and total height (hRPAs) were derived from RPAS images, these have been validated from data obtained in the field by means of forest inventory and by standing trees rigorous scaling. Diametric and volumetric equations were adjusted according to the variables obtained by RPAS. The total height (h) of the scaled trees and hRPAS did not show significant differences (χ² = 31.013). When comparing the estimates obtained by the v equation with their respective values of the scaling, it is verified that the v equation is accurate for estimates of the variable under study (χ² = 0.8077). The results indicated success in tree detection, even with the difficulties in delimiting the crowns due to occlusion. Despite the challenges arising from flight altitudes below 250 m, the estimates of diameter, height, and individual volume using metrics derived from RPAS products were accurate, consistent with those obtained in the traditional forest inventory. The use of RPAS for volumetric quantification of forest stands in Rondônia represents an innovative approach in the sector, despite the challenges encountered. [ABSTRACT FROM AUTHOR]

The purpose of this study was to characterize the floristic-structural aspects and the distribution of aboveground biomass (AGB) of degraded forests located in the arc of deforestation, southern Brazilian Amazon. In addition to characterizing the forest as a whole, analyses at the level of sampling units were established. Forest inventory data provided support to biomass estimates, as well as floristic-structural analysis. A survey was carried out, collecting from plots of 2,500 m2 (50 x 50m) diameter at breast height (DBH >10cm) and total height (HT) of the trees. The forest showed a high concentration of species distributed in a few botanical families and a high number of locally rare species. The sampling units showed floristic similarity, identifiable by cluster analysis. On the other hand, they showed significant structural differences based on the DBH and HT variables. The AGB estimate for the area was 215.20 Mg ha-1 (± 83.73 Mg ha-1). Those results contribute to better understanding the changes in forest formations related to forest degradation in the southern Brazilian Amazon, as well as to the definition of conservation and restoration strategies for degraded forests. [ABSTRACT FROM AUTHOR]

Variable height is commonly used as an input attribute to estimate other variables. Thus, to ensure less susceptibility to errors, it is necessary to obtain the variable height correctly. In addition to DBH, hypsometric relationships are influenced by several factors, such as site, age, genetic variation, and silvicultural practices. The inclusion of these factors in hypsometric models can lead to a gain in the quality of the estimates and in the biological realism. The objective of this study was to propose and evaluate the performance of a model extracted from artificial neural network training and of new models to estimate the total height of eucalyptus trees. The data used in this study originated from temporary forest inventories conducted in eucalyptus stands in Minas Gerais, Brazil. A multilayer perceptron artificial neural network was trained, and a nonlinear equation was extracted from the best-performing network to predict the total heights of trees. New linear and nonlinear hypsometric models were constructed and fit considering variables related to individual trees (DBH) and stands (plot basal area, age and site index). The new hypsometric models proposed in this study showed satisfactory performance and are effective for estimating the total heights of eucalyptus trees, particularly the model extracted from the artificial neural network and the nonlinear model. [ABSTRACT FROM AUTHOR]

One of the largest remnants of tropical dry forest is the South American Gran Chaco. A quarter of this biome is in Paraguay, but there have been few studies in the Paraguayan Chaco. The Gran Chaco flora is diverse in structure, function, composition and phenology. Fundamental ecological questions remain in this biome, such as what bioclimatic factors shape the Chaco's composition, structure and phenology. In this study, we integrated forest inventories from permanent plots with monthly high-resolution NDVI from PlanetScope and historical climate data from WorldClim to identify bioclimatic predictors of forest structure, composition and phenology. We found that bioclimatic variables related to precipitation were correlated with stem density and Pielou evenness index, while temperature-related variables correlated with basal area. The best predictor of forest phenology (NDVI variation) was precipitation lagged by 1 month followed by temperature lagged by 2 months. In the period with most water stress, the phenological response correlates with diversity, height and basal area, showing links with dominance and tree size. Our results indicate that even if the ecology and function of Dry Chaco Forest is characterised by water limitation, temperature has a moderating effect by limiting growth and influencing leaf flush and deciduousness. [ABSTRACT FROM AUTHOR]

Companies that produce and use wood for products and energy find it increasingly important to communicate the carbon balance and potential climate effects of these activities. Computing forest carbon stocks and stock changes, and emissions from operations, are often part of institutional reporting for environmental, social, and governance purposes. This article describes an example methodology to assess forest carbon changes associated with the harvesting of wood products and proposes metrics that could be used to allocate harvesting effects to individual organizations for their reporting purposes. We discuss boundaries (types of forests and carbon pools to include), spatially appropriate evaluations given uncertainty, temporal considerations, risk of reversals, and allocation of net sequestration to products sourced from the region. We also discuss the complex nature of the biogenic carbon cycle and warn about the appropriate interpretation of this methodology. [ABSTRACT FROM AUTHOR]

The aim of this study was to determine whether the iPad Pro 12th generation LiDAR sensor is useful to measure tree diameter at breast height (DBH) in natural boreal forests. This is a follow-up to a previous study that was conducted in a research forest and identified the optimal method for (DBH) estimation as a circular scanning and fitting ellipses to 4 cm stem cross-sections at breast height. The iPad Pro LiDAR scanner was used to acquire point clouds for 15 sites representing a range of natural boreal forest conditions in Ontario, Canada, and estimate DBH. The secondary objective was to determine if tested stand (species composition, age, density, understory) or tree (species, DBH) factors affected the accuracy of estimated DBH. Overall, estimated DBH values were within 1 cm of actual DBH values for 78 of 133 measured trees (59%). An RMSE of 1.5 cm (8.6%) was achieved. Stand age had a large effect (>0.15) on the accuracy of estimated DBH values, while density, understory, and DBH had moderate effects (0.05–0.14). No trend was identified between accuracy and stand age. Accuracy improved as understory density decreased and as tree DBH increased. Inertial measurement unit (IMU) and positional accuracy errors with the iPad Pro scanner limit the feasibility of using this device for forest inventories. [ABSTRACT FROM AUTHOR]

Remote sensing (RS) facilitates forest inventory across a wide range of variables required by the UNFCCC as well as by other agreements and processes. The Conventional model-based (CMB) estimator supports wall-to-wall RS data, while Hybrid estimators support surveys where RS data are available as a sample. However, the connection between these two types of monitoring procedures has been unclear, hindering the reconciliation of wall-to-wall and non-wall-to-wall use of RS data in practical applications and thus potentially impeding cost-efficient deployment of high-end sensing instruments for large area monitoring. Consequently, our objectives are to (1) shed further light on the connections between different types of Hybrid estimators, and between CMB and Hybrid estimators, through mathematical analyses and Monte Carlo simulations; and (2) compare the effects and explore the tradeoffs related to the RS sampling design, coverage rate, and cluster size on estimation precision. Primary findings are threefold: (1) the CMB estimator represents a special case of Hybrid estimators, signifying that wallto- wall RS data is a particular instance of sample-based RS data; (2) the precision of estimators in forest inventory can be greater for stratified non-wall-to-wall RS data compared to wall-to-wall RS data; (3) otherwise costprohibitive sensing, such as LiDAR and UAV, can support large scale monitoring through collecting RS data as a sample. These conclusions may reconcile different perspectives regarding choice of RS instruments, data acquisition, and cost for continuous observations, particularly in the context of surveys aiming at providing data for mitigating climate change. [ABSTRACT FROM AUTHOR]

Copyright of Journal of the Japan Forest Engineering Society is the property of Japan Forest Engineering Society and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Forest management inventories are essential tools for planning, sustainability assessment, and carbon accounting. The operational difficulties and cost to obtain field measurements for large landscapes is often prohibitive. Remote sensing offers an alternative to field-based sampling but has often been used in an area-based approach. The most recent remote sensing techniques can produce a census-level tree list, but these data are monetarily and computationally expensive. This research examines two remote sensing approaches compared with field-based methods to build forest management inventories for the same forest land base in north central Idaho, USA. Estimates of volume, density, and height were compared by stand and at the total ownership level. Incorporating lidar data reduced overall error and bias when compared with using satellite data alone. The low-pulse density of the lidar data used in this analysis resulted in underprediction of density for high-density stands. Species predictions proved challenging, with accuracies of 66% at the stand level and 54% at the individual tree level. Further research to refine species predictions in complex environments is encouraged. Study Implications : Forest management inventory estimates derived from satellite and lidar data are compared with estimates derived from field-based sampling. When satellite and lidar data are combined, the error is reduced and total forest volume estimates are comparable with those obtained from a field-based sample. Further research on improving species predictions for areas with multiple tree species and complex topography is needed. These methods are best suited for forest managers who desire to continue using their existing inventory software, need a complete inventory in 1–2 years, and want to avoid the large cost for a more intensive, census-level lidar inventory. [ABSTRACT FROM AUTHOR]

Abstract Background Measuring stem diameter (SD) is a crucial foundation for forest resource management, but current methods require expert personnel and are time-consuming and costly. In this study, we proposed a novel device and method for automatic SD measurement using an image sensor and a laser module. Firstly, the laser module generated a spot on the tree stem that could be used as reference information for measuring SD. Secondly, an end-to-end model was performed to identify the trunk contour in the panchromatic image from the image sensor. Finally, SD was calculated from the linear relationship between the trunk contour and the spot diameter in pixels. Results We conducted SD measurements in three natural scenarios with different land cover types: transitional woodland/shrub, mixed forest, and green urban area. The SD values varied from 2.00 cm to 89.00 cm across these scenarios. Compared with the field tape measurements, the SD data measured by our method showed high consistency in different natural scenarios. The absolute mean error was 0.36 cm and the root mean square error was 0.45 cm. Our integrated device is low cost, portable, and without the assistance of a tripod. Compared to most studies, our method demonstrated better versatility and exhibited higher performance. Conclusion Our method achieved the automatic, efficient and accurate measurement of SD in natural scenarios. In the future, the device will be further explored to be integrated into autonomous mobile robots for more scenarios.

Abstract Ground‐based light detection and ranging (LiDAR) is becoming increasingly popular as an alternative means to conventional forest inventory methods. By gauging the distances to multiple points on the surrounding object surfaces, LiDAR acquires 3D point clouds from which tree sizes and spatial distributions can be rapidly estimated. However, the high cost and specialized skills associated with LiDAR technologies have put them out of reach for many potential users. We here introduce ForestScanner, a free, mobile application that allows LiDAR‐based forest inventories by means of iPhone or iPad with a built‐in LiDAR sensor. ForestScanner does not require any manual analysis of 3D point clouds. As the user scans trees with an iPhone/iPad, ForestScanner estimates the stem diameters and spatial coordinates based on real‐time instance segmentation and circle fitting. The users can visualize, check and share the scanning results in situ. By using ForestScanner, we measured the stem diameters and spatial coordinates of 672 trees within a 1 ha plot in 1 hr 39 min with an iPhone and in 1 hr 38 min with an iPad (diameter ≥ 5 cm; detection rate = 100%). The diameters measured by ForestScanner and a diameter tape were in good agreement; R2 = 0.963 for iPhone and R2 = 0.961 for iPad. ForestScanner and a conventional surveying system showed almost identical results for tree mapping (assessed by the spatial distances among trees within 0.04 ha subplots); Mantel R2 = 0.999 for both iPhone and iPad. ForestScanner reduced the person‐hours required for measuring diameters to 25.7%, mapping trees to 9.3%, and doing both to 6.8% of the person‐hours taken using a dimeter tape and the conventional surveying system. Our results indicate that ForestScanner enables cost‐, labour‐ and time‐efficient forest inventories. The application can increase the accessibility to LiDAR for non‐experts (e.g. students, citizen scientists) and enhance resource assessments and biodiversity monitoring in forests world‐wide.