Search

Recent advances on surface-assisted synthesis have demonstrated that arrays of nanometer wide graphene nanoribbons can be laterally coupled with atomic precision to give rise to a highly anisotropic nanoporous graphene structure. Electronically, this graphene nanoarchitecture can be conceived as a set of weakly coupled semiconducting 1D nanochannels with electron propagation characterized by substantial interchannel quantum interferences. Here, we report the synthesis of a new nanoporous graphene structure where the interribbon electronic coupling can be controlled by the different degrees of freedom provided by phenylene bridges that couple the conducting channels. This versatility arises from the multiplicity of phenylene cross-coupling configurations, which provides a robust chemical knob, and from the interphenyl twist angle that acts as a fine-tunable knob. The twist angle is significantly altered by the interaction with the substrate, as confirmed by a combined bond-resolved scanning tunneling microscopy (STM) and ab initio analysis, and should accordingly be addressable by other external stimuli. Electron propagation simulations demonstrate the capability of either switching on/off or modulating the interribbon coupling by the corresponding use of the chemical or the conformational knob. Molecular bridges therefore emerge as efficient tools to engineer quantum transport and anisotropy in carbon-based 2D nanoarchitectures. This research was funded by the CERCA Programme/ Generalitat de Catalunya and by Grant Nos. SEV-2017-0706, CEX2021-001214-S, PID2019-107338RB-C62, PID2019- 107338RB-C65, and PID2019-107338RB-C66 funded by MCIN/AEI/10.13039/501100011033; FLAG-ERA Grant LEGOCHIP Projects PCI2019-111890-2 and PCI2019-111933-2 funded by MCIN/AEI/10.13039/501100011033 and cofunded by the European Union; Grant Nos. TED2021- 132388B-C41, TED2021-132388B-C42, and TED2021- 132388B-C44 funded by MCIN/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU/ PRTR; Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019−2022, ED431G 2019/03). X.D.C., A.S., and A.G.-L. also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government. C.M. was supported by Grant RYC2019-028110-I funded by MICIN/AEI/10.13039/501100011033 and by the European Social Fund “ESF Investing in your future”. M.T. was supported by Grant No. BES-2017-08078 funded by MCIN/ AEI/10.13039/501100011033 and by “ESF Investing in your future”. M.B. acknowledges funding from Villum fonden (VIL 00013340).

Precise control over the size and shape of graphene nanostructures allows engineering spin-polarized edge and topological states, representing a novel source of non-conventional π-magnetism with promising applications in quantum spintronics. A prerequisite for their emergence is the existence of robust gapped phases, which are difficult to find in extended graphene systems. Here we show that semi-metallic chiral GNRs (chGNRs) narrowed down to nanometer widths undergo a topological phase transition. We fabricated atomically precise chGNRs of different chirality and size by on surface synthesis using predesigned molecular precursors. Combining scanning tunneling microscopy (STM) measurements and theory simulations, we follow the evolution of topological properties and bulk band gap depending on the width, length, and chirality of chGNRs. Our findings represent a new platform for producing topologically protected spin states and demonstrate the potential of connecting chiral edge and defect structure with band engineering., We gratefully acknowledge financial support from the Agencia Estatal de Investigación (AEI) through projects No MAT2016-78293, PID2019-107338RB, and FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618, from the Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09), from the University of the Basque Country (Grant IT1246-19) and the Basque Departamento de Educación (PhD scholarship no. PRE_2019_2_0218 of S.S.), and from the European Regional Development Fund. We also acknowledge funding from the European Union (EU) H2020 program through the ERC (grant agreement No. 635919) and FET Open project SPRING (grant agreement No. 863098).

Spin-flip excitations of iron porphyrin molecules on Au(111) are investigated with a low-temperature scanning tunneling microscope. The molecules adopt two distinct adsorption configurations on the surface that exhibit different magnetic anisotropy energies. Density functional theory calculations show that the different structures and excitation energies reflect unlike occupations of the Fe 3d levels. We demonstrate that the magnetic anisotropy energy can be controlled by changing the adsorption site, the orientation, or the tip-molecule distance.

Spin-hosting graphene nanostructures are promising metal-free systems for elementary quantum spintronic devices. Conventionally, spins are protected from quenching by electronic band gaps, which also hinder electronic access to their quantum state. Here, we present a narrow graphene nanoribbon substitutionally doped with boron heteroatoms that combines a metallic character with the presence of localized spin 1/2 states in its interior. The ribbon was fabricated by on-surface synthesis on a Au(111) substrate. Transport measurements through ribbons suspended between the tip and the sample of a scanning tunneling microscope revealed their ballistic behavior, characteristic of metallic nanowires. Conductance spectra show fingerprints of localized spin states in the form of Kondo resonances and inelastic tunneling excitations. Density functional theory rationalizes the metallic character of the graphene nanoribbon due to the partial depopulation of the valence band induced by the boron atoms. The transferred charge builds localized magnetic moments around the boron atoms. The orthogonal symmetry of the spin-hosting state’s and the valence band’s wave functions protects them from mixing, maintaining the spin states localized. The combination of ballistic transport and spin localization into a single graphene nanoribbon offers the perspective of electronically addressing and controlling carbon spins in real device architectures., We gratefully acknowledge financial support from Grants PID2019-107338RB-C61, PID2019-107338RB-C62, PID2019-107338RB-C66, PID2019-110037GB-I00, and PCI2019-111933-2 and the Maria de Maeztu Units of Excellence Program CEX2020-001038-M funded by MCIN/AEI/10.13039/501100011033, the European Regional Development Fund, the European Union (EU) H2020 program through the FET Open project SPRING (Grant Agreement No. 863098), the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019–2022, ED431G 2019/03), the Dpto. Educación Gobierno Vasco (Grant Nos. PIBA-2020-1-0014, IT1246-19, and IT-1569-22) and the Programa Red Guipuzcoana de Ciencia, Tecnología e Innovación 2021 (Grant No. 2021-CIEN-000070-01. Gipuzkoa Next). The authors acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC on behalf of the Department of Education of the Basque Government.

Molecular rotors have attracted considerable interest for their prospects in nanotechnology. However, their adsorption on supporting substrates, where they may be addressed individually, usually modifies their properties. Here, we investigate the switching of two closely related three-state rotors mounted on platforms on Au(111) using low-temperature scanning tunneling microscopy and density functional theory calculations. Being physisorbed, the platforms retain important gas-phase properties of the rotor. This simplifies a detailed analysis and permits, for instance, the identification of the vibrational modes involved in the rotation process. The symmetry provided by the platform enables active control of the rotation direction through electrostatic interactions with the tip and charged neighboring adsorbates. The present investigation of two model systems may turn out useful for designing platforms that provide directional rotation and for transferring more sophisticated molecular machines from the gas phase to surfaces.

The on-surface synthesis of edge-functionalized graphene nanoribbons (GNRs) is challenged by the stability of the functional groups throughout the thermal reaction steps of the synthetic pathway. Edge fluorination is a particularly critical case in which the interaction with the catalytic substrate and intermediate products can induce the complete cleavage of the otherwise strong C–F bonds before the formation of the GNR. Here, we demonstrate how a rational design of the precursor can stabilize the functional group, enabling the synthesis of edge-fluorinated GNRs. The survival of the functionalization is demonstrated by tracking the structural and chemical transformations occurring at each reaction step with complementary X-ray photoelectron spectroscopy and scanning tunneling microscopy measurements. In contrast to previous attempts, we find that the C–F bond survives the cyclodehydrogenation of the intermediate polymers, leaving a thermal window where GNRs withhold more than 80% of the fluorine atoms. We attribute this enhanced stability of the C–F bond to the particular structure of our precursor, which prevents the cleavage of the C–F bond by avoiding interaction with the residual hydrogen originated in the cyclodehydrogenation. This structural protection of the linking bond could be implemented in the synthesis of other sp2-functionalized GNRs., C.M. was supported by the Agency for Management of University and Research grants (AGAUR) of the Catalan government through the FP7 framework program of the European Commission under Marie Curie COFUND action 600385 funded by the CERCA Program/Generalitat de Catalunya. We acknowledge support from the Spanish Ministry of Economy and Competitiveness, MINECO (under Contracts Nos. MAT2016-78293-C6 and FIS2017-83780-P and SEV-2017-0706), the Spanish Research Agency (AEI /10.13039/501100011033, under Contracts Nos. PID2019-107338RB, PCI2019-111890-2), the European Regional Development Fund (ERDF), the Interreg V-A España-Francia-Andorra program (Contract No. EFA 194/16 TNSI), the EU project SPRING (863098), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2019-2022, ED431G 2019/03).

Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated with localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around them. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between the tip and the sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them into basic elements of spintronic devices., We gratefully acknowledge financial support from Spanish Agencia Estatal de Investigación (AEI) (MAT2016-78293, PID2019-107338RB, FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), from the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant. No. 863098), the Basque Departamento de Educación through the PhD fellowship No. PRE_2019_2_0218 (S.S.), the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019–2022, ED431G 2019/03), the University of the Basque Country (Grant IT1246-19), and the European Regional Development Fund (ERDF). I. P. also thanks Xunta de Galicia and European Union (European Social Fund, ESF) for the award of a predoctoral fellowship

The electronic properties of graphene nanoribbons (GNRs) can be precisely tuned by chemical doping. Here we demonstrate that amino (NH2) functional groups attached at the edges of chiral GNRs (chGNRs) can efficiently gate the chGNRs and lead to the valence band (VB) depopulation on a metallic surface. The NH2-doped chGNRs are grown by on-surface synthesis on Au(111) using functionalized bianthracene precursors. Scanning tunneling spectroscopy resolves that the NH2 groups significantly upshift the bands of chGNRs, causing the Fermi level crossing of the VB onset of chGNRs. Through density functional theory simulations we confirm that the hole-doping behavior is due to an upward shift of the bands induced by the edge NH2 groups., We acknowledge financial support from (i) AEI/FEDER-EU through grant nos. MAT2016-78293-C6, FIS2017-83780-P AEI/FEDER, EU, the Maria de Maeztu unit of excellence MDM-2016-0618, and the Severo Ochoa program (ICN2) SEV-2017-0706; (ii) the European Research Council (grant agreement no. 635919); (iii) the Xunta de Galicia (Centro Singular De Investigacion de Galicia, accreditation 2016-2019, ED431G/09); (iv) the European FET-OPEN project SPRING (#863098); (v) the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (contract no. EFA 194/16 TNI); (vi) the CERCA Program/Generalitat de Catalunya; (vii) the Gobierno Vasco UPV/EHU (project IT1246-19); (viii) Basque Government Project (IT-1255-19); and (ix) Diputacion Foral De Gipuzkoa RED 2019-096.

Contributing to the need for new graphene nanoribbon (GNR) structures that can be synthesized with atomic precision, we have designed a reactant that renders chiral (3,1)-GNRs after a multistep reaction including Ullmann coupling and cyclodehydrogenation. The nanoribbon synthesis has been successfully proven on different coinage metals, and the formation process, together with the fingerprints associated with each reaction step, has been studied by combining scanning tunneling microscopy, core-level spectroscopy, and density functional calculations. In addition to the GNR’s chiral edge structure, the substantial GNR lengths achieved and the low processing temperature required to complete the reaction grant this reactant extremely interesting properties for potential applications., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 635919), from ICT-FET EU integrated project PAMS (Agreement No. 610446), from the Spanish Ministry of Science and Competitiveness (MINECO, Grant Nos. MAT2013-46593-C6-01, MAT2013-46593-C6-2-P, MAT2013-46593-C6-4-P, MAT2013-46593-C6-6-P), FEDER, from the Basque Government (Grant Nos. IT-621-13, IT-756-13, and PI2015-042), from the World Premier International Center (WPI) for Materials Nanoarchitectonics (MANA) of the National Institute for Materials Science (NIMS), Tsukuba, Japan, and from JSPS Bilateral Open Partnership Joint Research Project.

Graphene nanoribbons (GNRs) and their derivatives attract growing attention due to their excellent electronic and magnetic properties as well as the fine-tuning of such properties that can be obtained by heteroatom substitution and/or edge morphology modification. Here, we introduce graphene nanoribbon derivatives—organometallic hybrids with gold atoms incorporated between the carbon skeleton and side Cl atoms. We show that narrow chlorinated 5-AGNROHs (armchair graphene nanoribbon organometallic hybrids) can be fabricated by on-surface polymerization with omission of the cyclodehydrogenation reaction by a proper choice of tailored molecular precursors. Finally, we describe a route to exchange chlorine atoms connected through gold atoms to the carbon skeleton by hydrogen atom treatment. This is achieved directly on the surface, resulting in perfect unsubstituted hydrogen-terminated GNRs. This will be beneficial in the molecule on-surface processing when the preparation of final unsubstituted hydrocarbon structure is desired., This work was supported by the National Science Center, Poland (2019/35/B/ST5/02666), and the EU Project PAMS (610446). A.G.L., D.S.P., and P.B. acknowledge the Spanish Agencia Estatal de Investigación (Grants MAT2016-78293-C6-4-R, PID2019-107338RB-C66, and FIS2017-83780-P), Dep. Educación of the Basque Government and UPV/EHU (Grant IT-756-13), and the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant 863098) for support.

Miniaturization of electronic circuits into the single-atom level requires novel approaches to characterize transport properties. Due to its unrivaled precision, scanning probe microscopy is regarded as the method of choice for local characterization of atoms and single molecules supported on surfaces. Here we investigate electronic transport along the anisotropic germanium (001) surface with the use of two-probe scanning tunneling spectroscopy and first-principles transport calculations. We introduce a method for the determination of the transconductance in our two-probe experimental setup and demonstrate how it captures energy-resolved information about electronic transport through the unoccupied surface states. The sequential opening of two transport channels within the quasi-one-dimensional Ge dimer rows in the surface gives rise to two distinct resonances in the transconductance spectroscopic signal, consistent with phase-coherence lengths of up to 50 nm and anisotropic electron propagation. Our work paves the way for the electronic transport characterization of quantum circuits engineered on surfaces., This work was supported by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract number 610446), the Polish Ministry for Science and Higher Education from financial resources for science in 2013–2017 granted for an international co-financed project (contract number 2913/7.PR/2013/2) and the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant Numbers MAT2016-78293-C6-4-R and FIS2017-83780-P). M.K. acknowledges financial support received from the Polish Ministry of Science and Higher Education, contract number 0341/IP3/2016/74.

Synthesis of a triporous nanographene with 102 sp2 carbon atoms by combining solution and surface chemistry., The synthesis of porous nanographenes is a challenging task for solution chemistry, and thus, on-surface synthesis provides an alternative approach. Here, we report the synthesis of a triporous nanographene with 102 sp2 carbon atoms by combining solution and surface chemistry. The carbon skeleton was obtained by Pd-catalyzed cyclotrimerization of arynes in solution, while planarization of the molecule was achieved through two hierarchically organized on-surface cyclodehydrogenation reactions, intra- and inter-blade. Remarkably, the three non-planar [14]annulene pores of this nanographene further evolved at higher temperatures showing interesting intra-porous on-surface reactivity.

The shot noise of the current $I$ through junctions to single trioxatriangulenium cations (TOTA$^+$) on Au(111) is measured with a low temperature scanning tunneling microscope using Au tips. The noise is significantly reduced compared to the Poisson noise power of $2eI$ and varies linearly with the junction conductance. The data are consistent with electron transmission through a single spin-degenerate transport channel and show that TOTA$^+$ in a Au contact does not acquire an unpaired electron. Ab initio calculations reproduce the observations and show that the current involves the lowest unoccupied orbital of the molecule and tip states close to the Fermi level., Comment: 5 pages, 5 figures